1,681 research outputs found
Amorphous Carbon Coatings at Cryogenic Temperatures with LHC Type Beams: First Results with the COLDEX Experiment
No full textExtrapolations of electron cloud data from the Large Hadron Collider (LHC) Run 1 to the High Luminosity upgrade (HL-LHC) beam parameters predict an intolerable increase of heat load on the beam screens of the inner triplets. Amorphous carbon (a-C) coating of the beam screen surface is proposed to reduce electron cloud production, thereby minimising its dissipated power. To validate this solution, the COLDEX experiment has been re-commissioned. Such equipment mimics the performance of the LHC cold bore and beam screen cryogenic vacuum system in presence of LHC beams in the Super Proton Synchrotron (SPS). The main objective of the study is the performance evaluation of a-C coatings while operating the beam screen in the 10 to 60 K temperature range and cold bore below 3 K. This paper reviews the status of COLDEX and the results obtained during its first experimental runs
The SU(3)-invariant sector of new maximal supergravity
No full textWe investigate the SU(3)-invariant sector of the one-parameter family of SO(8) gauged maximal supergravities that has been recently discovered. To this end, we construct the N = 2 truncation of this theory and analyse its full vacuum structure. The number of critical point is doubled and includes new N = 0 and N = 1 branches. We numerically exhibit the parameter dependence of the location and cosmological constant of all extrema. Moreover, we provide their analytic expressions for cases of special interest. Finally, while the mass spectra are found to be parameter independent in most cases, we show that the novel non-supersymmetric branch with SU(3) invariance provides the first counterexample to this.
Measurement of NEG Coating Performance Variation in the LHC after the First Long Shutdown
No full textDuring the Long Shutdown 1 (LS1) of the Large Hadron Collider, 90% of the Non-Evaporable Getter (NEG) coated beam pipes in the Long Straight Sections (LSS) were vented to undertake the planned upgrade and consolidation programmes. After each intervention, an additional bake-out and NEG activation were performed to reach the vacuum requirements. An analysis of the coating performance variation after the additional activation cycle has been carried out by using ultimate pressure and pressure build-up measurements. In addition, laboratory measurements have been carried out to mimic the LHC coated beam pipe behaviour. The experimental data have been compared with calculation obtained by Molflow+
Monte Carlo simulations of ultra high vacuum and synchrotron radiation for particle accelerators
No full textWith preparation of Hi-Lumi LHC fully underway, and the FCC machines under study, accelerators will reach unprecedented energies and along with it very large amount of synchrotron radiation (SR). This will desorb photoelectrons and molecules from accelerator walls, which contribute to electron cloud buildup and increase the residual pressure - both effects reducing the beam lifetime. In current accelerators these two effects are among the principal limiting factors, therefore precise calculation of synchrotron radiation and pressure properties are very important, desirably in the early design phase. This PhD project shows the modernization and a major upgrade of two codes, Molflow and Synrad, originally written by R. Kersevan in the 1990s, which are based on the test-particle Monte Carlo method and allow ultra-high vacuum and synchrotron radiation calculations. The new versions contain new physics, and are built as an all-in-one package - available to the public. Existing vacuum calculation methods are overviewed, then the steady-state and time-dependent algorithms behind the ultra-high vacuum simulator Molflow are presented. Some practices to tackle the most common problems that arise when simulating large systems are also discussed. Results are compared to theory, and validated through two experiments. Next the the main steps of synchrotron radiation simulations are presented. Properties of SR are summarized, along with optimizations that allow simulating the rather complex underlying physics at a higher speed. The resulting software's photon generation algorithm is benchmarked against published data. The phenomenon of photon stimulated desorption and its literature is overviewed, then two dedicated photodesorption experiments carried out in KEK (Tsukuba, Japan) are presented: one with six room-temperature samples and an other at liquid nitrogen temperature. A simple synchrotron radiation calculation is performed for the LHeC interaction region, allowing to compare Synrad+ results with published analytic calculations. Then the calculations are repeated for a more precise geometry description. The pressure profile of a crotch absorber of the recently started Max IV light source is calculated using Molflow+ and Synrad+ together. Finally the pressure analysis of the SuperKEKB interaction region is presented, consisting of modeling the vacuum chamber and the optics, calculating synchrotron radiation, then performing vacuum simulations. It is confirmed that pressure is expected to meet the design requirements during operation of the machine
Measurement of the top quark mass with the template method in the t<span style="text-decoration: overline">t</span> →lepton+jets channel using ATLAS data
No full textContains fulltext :
103516.pdf (Publisher’s version ) (Open Access
Measurement of the production cross section of jets in association with a Z boson in pp collisions at √s=7 TeV with the ATLAS detector
No full textMeasurements of the production of jets of particles in association with a Z boson in pp collisions at s√=7 TeV are presented, using data corresponding to an integrated luminosity of 4.6 fb−1 collected by the ATLAS experiment at the Large Hadron Collider. Inclusive and differential jet cross sections in Z events, with Z decaying into electron or muon pairs, are measured for jets with transverse momentum p T > 30 GeV and rapidity |y| < 4.4. The results are compared to next-to-leading-order perturbative QCD calculations, and to predictions from different Monte Carlo generators based on leading-order and next-to-leading-order matrix elements supplemented by parton showers
Analytical and numerical tools for vacuum systems
No full textModern particle accelerators have reached a level of sophistication which require a thorough analysis of all their sub-systems. Among the latter, the vacuum system is often a major contributor to the operating performance of a particle accelerator. The vacuum engineer has nowadays a large choice of computational schemes and tools for the correct analysis, design, and engineering of the vacuum system. This paper is a review of the different type of algorithms and methodologies which have been developed and employed in the field since the birth of vacuum technology. The different level of detail between simple back-of-the-envelope calculations and more complex numerical analysis is discussed by means of comparisons. The domain of applicability of each method is discussed, together with its pros and cons
Synchrotron radiation-induced desorption from a NEG-coated vacuum chamber [of ESRF beamline]
No full textWhen the whole inner surface of a vacuum chamber is coated with a non-evaporable getter film, very low static and dynamic pressures are expected after activation. In an accelerator environment this could result in a longer beam lifetime, in a lower risk of pressure bumps, and in a lower level of bremsstrahlung radiation due to the beam-gas interactions. To substantiate these favourable characteristics a Ti- Zr-V coated stainless-steel chamber has been tested on a dedicated beamline at the ESRF. It is shown that a large reduction of the synchrotron radiation-induced desorption occurs after activation. (10 refs)
- …
