69 research outputs found
ANALISIS KEPUASAN PENGUNJUNG PADA PT TAMAN IMPIAN JAYA ANCOL DITINJAU DARI KUALITAS PELAYANAN
No full textFEBRI CHOLID MUHTADI. 2015. 8223128284. Analisis Kepuasan Pengunjung pada PT TAMAN IMPIAN JAYA ANCOL Ditinjau Dari Kualitas Pelayanan.Program studi DIII manajemen pemasaran. Jurusan Manajemen. Fakultas Ekonomi. Universitas Negeri Jakarta.
This paper has purpose to know about the impact service quality of customer satisfaction in PT Taman Impian Jaya Ancol. The writer take the title to find out how the impact of service quality on satisfaction. The method used is a descriptive analysis with searching trought library,observation and quetioner. Technical analysis used of data is descriptive analysis, the data has been collected will be processed with SPSS. In this study the author used technical data analysis correlation.
From the results of this study it can be concluded that the prence of a positive relationship between service quality on customer satisfaction by 5,293 and the magnitude of impact of service quality to customer PT Taman Impian Jaya Ancol conducted customer satisfaction levels by 29,2% while the remaining 70,8% influenced by other factors
CONVERSATION ANALYSIS ON THE INTERVIEW BETWEEN NEWS REPORTER OF NEW YORK TIMES AND AUTHOR ON BESTSELLER NOVELS
No full textThe tesis entitled “Conversation Analysis on the Interview between News reporter of New York Times and Author on Bestseller Novels” is aimed at describing the aspects of conversation found in that interview. Those are opening and closing, adjacency pair, topic management and turn taking. This study uses a descriptive qualitative method to study the problem, because this study has a purpose to describe and analyze the aspects of conversation in an interview. The data were taken from written data of news interview of news reporter and author in Stuart Wood’s (author) official webpage. The speakers are a news reporter and author. The conversation was an English dialogue in formal conversation. The result showed that there is no opening and this interview because the interviewer directly asked question to the author. The closing is indicated by the preclosing” “Anything else you’d like to say to readers?”. Then, it was followed by the answer of the interviewee or the novel’s author. The dominant adjacency pair found in this interview is question-answer. The topic discussed in this interview is only one that is about the novel wriitten by the author. The initiator of the topic is interviewer by asking something to the interviewee. The topic is developed by the interviewee by giving answer to the interviewer. There are 114 turn takings in the conversation: 57 times from the interviewer and 57 times form the interviewee. In this conversation there is no dominant person or less dominant person because both of them gives the same turns. Beside that, the form of the conversation is just question and answer. So, the turn taking just happened when the interviewer gives question to the interviewee
Representasi Perempuan Jawa pada Novel Canting Karya Arswendo Atmowiloto dalam Diskursus Feminisme
No full textABSTRAK Wardana, Febri Putra. 2017. Representasi Perempuan Jawa pada Novel Canting Karya Arswendo Atmowiloto dalam Diskursus Feminisme. Skripsi, Jurusan Sastra Indonesia, Fakultas Sastra, Universitas Negeri Malang. Pembimbing: Prof. Dr. Maryaeni, M.Pd. Kata Kunci: perempuan Jawa, novel Canting, domestik dan publik Perempuan Jawa dalam penulisan ini merupakan perempuan yang lahir dalam kultur Jawa dan dididik serta dibesarkan dalam lazimnya masyarakat patriarki. Peran perempuan Jawa yang tercermin pada novel Canting karya Arswendo Atmowiloto cukup menarik. Perempuan Jawa ditampilkan secara dominan dan superior. Perempuan Jawa dapat menguasai ruang domestik dan ruang publik secara bersamaan. Sikap yang ditunjukkan perempuan Jawa dengan sifat sabar, pasrah, hubungan baik kepada masyarakat, serta pekerja keras ditampilkan dan diceritakan dengan baik oleh Arswendo. Adapun fokus penelitian adalah peran perempuan Jawa dalam ruang domestik dan publik. Penelitian ini menggunakan metode penelitian deskriptif dengan pendekatan kualitatif dalam diskurus feminis. Tahapan penelitian ini meliputi; (1) memilih dan menentukan buku novel, (2) membaca sumber data yang berupa buku novel, (3) pengolahan data, yang terdiri dari ketegorisasi dan reduksi data, (4) penyajian data (5) interpretasi data, mendeskripsikan dan memaparkan hasil analisis sesuai data yang ditemukan dan fokus penelitian. (6) kesimpulan. Pengumpulan data dilakukan melalui studi dokumen. Dokumen yang berisikan data-data penelitian. Selanjutnya, prosedur pengumpulan data dilakukan dengan cara: (1) penulis menentukan objek kajian berupa novel Canting, (2) membaca kritis novel ‘Canting’ untuk memahami keseluruhan cerita, (3) mengambil kutipan berupa deskriptif, naratif, atau dialog yang sesuai dengan fokus penelitian, (4) mengklasifikasikan data sesuai dengan fokus penelitian, (5) menganalisis dan menafsirkan data untuk menemukan representasi perempuan Jawa. Berdasarkan analisis data diperoleh tiga simpulan. Pertama, perempuan Jawa dalam novel Canting memegang superioritas pada ruang domestik yang tidak dimiliki laki-laki. Kedua, perempuan Jawa dalam novel Canting memegang ruang publik yang pada umumnya dipandang sebagai wilayah maskulinitas. Ketiga, perempuan Jawa dapat menyelaraskan kedua ruang domestik maupun publik dengan seimbang. ABSTRACT Wardana, Febri Putra. 2017. Representation of Javanese Women in Novel “Canting” by Arswendo Atmowiloto on Discourse Feminism. Thesis, Department of Indonesian Literature, Faculty of Letters, State University of Malang. Advisor: Prof. Dr. Maryaeni, M.Pd. Keywords: Javanese women, novel Canting, domestic and public Javanese women are women born in Javanese culture and in patriarchal society. The role of Javanese women reflected in novel Canting by Arswendo Atmowiloto is quite interesting. Javanese women are shown to be dominant and superior. Javanese women can control domestic space and public space simultaneously. The attitude shown by Javanese women with patience, submissiveness, good relationships to the community, and hard workers is well presented and told by Arswendo. The focus of this research is the role of Javanese women in domestic and public spaces. This research uses descriptive qualitative research method with feminist discourse. Stages of this research include; (1) selecting and defining novel books, (2) reading data sources in the form of novel books (3) data processing, consisting of data categorization and data collection, (4) data presentation (5) data interpretation, according to the data found and the focus of the study. (6) conclusions. Data collection is done through document studies. Documents containing the research data. Furthermore, the data collection procedure is done by: (1) the author determines the object of the study of the novel Canting, (2) critical reading of the novel Canting to understand the whole story, (3) take descriptive quote, narrative, or dialogue accordingly with a focus on research, (4) classifying data according to the research focus, (5) analyzing and interpreting data to find representations of Javanese women. Based on the data analysis obtained three conclusions. First, the Javanese women in the novel Canting have superiority in the domestic space that men do not have. Second, Javanese women in the novel Canting have no less attitude than men in the public sphere which is the sector of masculinity. Third, Javanese women can harmonize both domestic and public spaces in a balanced way
STUDI ANALISA KETERDAPATAN AIRTANAH PADA TAMBANG UTARA DAN SELATAN POMALAA DENGAN PENDEKATAN WATERSHED MODELLING SYSTEM
No full textAirtanah merupakan salah satu aspek penting dalam aktivitas penambangan yang perlu untuk diidentifikasi dan diketahui baik pola aliran permukaan maupun pola atau model aliran air bawah permukaan. Hal tersebut dikarenakan, dengan kita mengetahui pola aliran air baik permukaan maupun bawah permukaan perencanaan penambangan akan semakin detil dan komprehensif sehingga dapat mengantisipasi dan memitigasi risiko yang akan muncul dikemudian hari akibat airtanah tersebut. Penelitian dilakukan untuk melakukan identifikasi keterdapatan air tanah pada tambang utara, pit Everest, Pomalaa dan tambang selatan dengan pendekatan awal berupa watershed modelling system. Metode penelitian menggunakan data primer berupa data muka airtanah, pendekatan geolistrik serta topografi atau kontur sebagai acuan. Analisa yang digunakan menggunakan pendekatan delineasi basin airtanah permukaan sebagai indikasi awal lalu dikonfirmasi dengan data bawah permukaan berupa model 2D dan 3D muka airtanah serta pemodelan resistivitas untuk mengetahui sebaran akuifer. Hasil penelitian menunjukan dengan pendekatan watershed dapat diketahui indikasi awal seepage atau rembesan pada Pit Everest, Tambang utara lalu dikonfirmasi dengan data bawah permukaan bahwa pada titik seepage elevasi topografi dan elevasi model muka airtanah berada pada level yang sama sehingga titik tersebut merupakan titik luahan sesuai dengan kenampakan aktual lapangan pada Pit Everest.Sementara pada area tambang selatan, baik model muka airtanah serta model resistivitas menunjukan level airtanah berada dibawah topografi sehingga tidak ada rembesan atau seepage yang menghambat aktivitas penambangan tambang selatan. Dengan pendekatan ini maka dapat diketahui keterdapatan airtanah serta pola aliran air baik pada permukaan maupun bawahpermukaan pada tambang utara dan selatan site Pomalaa. Selain itu paradigma preventif dapat diterapkan pada lokasi lain agar dapat memitigasi risiko akibat airtanah lebih awal
SEQUENCE OF SERVICE DI SPICE RESTORAN OAKWOOOD HOTEL & RESIDENCE SURABAYA
No full textThis final project entitled squence off Service at Spice Restaurant Oakwood
Hotel & Residence Surabaya has the goal of being able to deliver knowledge
about the correct Service squence off at a restaurant. The author made
observations during the Field Work Practice (PKL) as a waitress at the Spice
Restaurant & Deck side Lounge & Bar.
The author can conclude that the sequence of service at Spice Restaurant
Surabaya includes, giving welcome, escorting guests, giving menus, writing guest
orders, up selling, serving drinks, preparing food utensils, serving food, checking
guest satisfaction, how to take dirty plates, cleaning the rest of the food on the
table, serving coffee or tea and how to give the bill
The effect of case hardening treatment on aluminum 7075 toward its hardness and tensile strength
No full textBENTUK CAMPUR KODE DALAM NOVEL LASKAR PELANGI KARYA ANDREA HIRATA
No full textThis article discusses the phenomenon of code mixing in the novel Laskar Pelangi by Andrea Hirata. Code mixing is the use of language or style of language that mixes two or more different language codes. The purpose of this study is to analyze and explain the form of code mixing used in the novel and to identify the reasons for using code mixing by the author.
 
Backfiling Strategy at Gag Island, PT Gag Nickel, Subsidiary of PT ANTAM (Persero) Tbk
No full textAbstractPT Gag Nikel is subsidiary of PT ANTAM (Persero) Tbk, doing feasibility study at moment. The purpose of scheduling backfill is to do volume balance between out-pit and in-pit dumping and control amount low grade that goes to stockpile and calculate distances hauled during mining process. The material scheduled divided into overburden, low grade, and ore. The material could be sent to following destinations, overburden to in-pit and out-pit dumps, low grade to in-pit, out-put dumps, stockpiles, and ore to stockpiles only. In controlling dumping sequence, there are three consideration constraints: geotechnical, capacity, and haul distance. Geotechnical constraints use dump slope which ensures maximum dump overall slope angle not exceed 13 -15 degree, also offset dump to face, assist specified distance (50 m) between toe of working face and “toe” of dumps. This di stance must sufficient to allow operation such ore loading and water handling safely and efficiently. Second constraint is capacity that control amount low grade sent to stockpiles. Haul distance as third constraint is way to dump close to current mining o peration. By managing low grade material, when processing technology adequate, those material can be extracted. This shows Antam's good will of resource conservation that conform with sustainability
SENTRALISASI LISENSI PERANGKAT LUNAK DAN INTERKONEKSI DATA
No full textABSTRAK Industri 4.0 adalah istilah yang diberikan untuk industri “pintar†dimana mesin/perangkat digabung dengan koneksi jaringan. Tren industri 4.0 adalah otomatisasi dan koneksivitas data termasuk cloud computing. Sekarang, dan masa mendatang di industri 4.0, komputer terhubung satu sama lain untuk akhirnya membuat keputusan tanpa keterlibatan manusia. Industri pertambangan merupakan salah satu industri yang paling membutuhkan koneksi karena lokasi site terpisah dengan head office. Sebagai pelaku industri pertambangan yang memiliki site lebih dari satu dan tersebar dari Indonesia bagian Barat sampai dengan bagian Timur, PT ANTAM Tbk (ANTAM) memerlukan koneksi antara Âsite dengan head office. Salah satu rangkaian pekerjaan ANTAM adalah collecting database eksplorasi, pemodelan geologi dan estimasi sumberdaya serta distribusi block model sumberdaya ke site. Database eksplorasi tersebut digunakan untuk update model geologi dan estimasi sumberdaya setiap triwulan semua komoditas dari tiap site yang sedang aktif kegiatan eksplorasinya. Lisensi software-software yang digunakan oleh ANTAM untuk pemodelan dan estimasi sumberdaya tersebut terpusat di server di head office, sehingga tidak ada lisensi software yang standalone di computer user. Hal tersebut membuat siapapun dandimanapun lokasinya bisa menggunakan lisensi-lisensi yang tersedia dengan koneksi ke server. Hasil update block model sumberdaya kemudian di distribusikan ke site sebagai guidance. Tim di site juga melakukan pengolahan terhadap block model tersebut menggunakan software tertentu dengan lisensi yang tersedia di server melalui koneksi internal ANTAM dari site ke head office di Jakarta. Meskipun dalam pengolahan update block model sumberdaya tidak seluruhnya otomatis, karena masih memerlukan justifikasi resource estimator atau Competent Person, namun dalam pengerjaannya bisa kapanpun dan dimanapun karena lisensi yang terpusat dan dapat digunakan oleh siapapun yang memerlukan. Sentralisasi lisensi perangkat lunak dan interkoneksi data yang dilakukan oleh ANTAM membuat distribusi data eksplorasi dan update block model sumberdaya tiap komoditas ANTAM yang tersebar dari Indonesia bagian Barat sampai bagian Timur tidak terkendala jarak dan waktu, khususnya untuk update block model. Hal tersebut dapat dilakukan kapanpun dan dimanapun, serta siapapun yang memerlukan dapat menggunakan lisensi software yang tersedia di server. Key words: industri 4.0, koneksivitas, lisensi, server, database eskplorasi, block model sumberdaya  ABSTRACT Industry 4.0 is a name given to the idea of smart industry where machines are augmented with the web connectivity. The trend is towards automation and data connectivity includes cloud computing. Now, and into the future as Industry 4.0 unfolds, computers are connected and communicate with one another to ultimately make decisions without human involvement. Mining industry is one of industry that really needs connectivity because the location of site is separate to its head office. As a mining industry with more than one of sites that spread from west part to east part of Indonesia, PT ANTAM Tbk (ANTAM) needs connectivity between sites and head office. One of working cycle of ANTAM is exploration database collecting, geological modeling, resource estimation and distribution the resource block model to sites. The exploration database will be used to update the geological model and estimate the resources every quarter for each commodity of each site which is actively explore. The licenses of ANTAM’s software to do modeling and estimate the resources are centralized in a server in head office, so there is no standalone software license in user computer. Centralized licenses make anyone and everywhere can utilize the licenses using connection to the server. The updated block model distributed to sites as guidance. Team on sites work on the block model use certain software with licenses that centralized in the server through ANTAM’s connection from sites to head office. Although in estimate the resources not fully automation due to still need justification from resource estimator or Competent Person, but in the process could be everywhere and anytime because of centralized licenses. Centralized software licenses and data interconnection of ANTAM make distribution of exploration data and updated block model for each commodities of ANTAM that spread from west part to east part of Indonesia is not a problem, especially for updating the block model. It could be proceed everywhere, anytime by everyone using licenses in the server. Key words: industry 4.0, connectivity, license, server, exploration database, resource block mode
- …
