127 research outputs found
NILAI – NILAI SOSIAL YANG TERCERMIN DALAM NOVEL CHINMOKU KARYA SHUSAKU ENDO
Get PDFABSTRACT
Febriana, Erizka Febriana 2018. Social Values that Reflected in the novel entitled Chinmoku by Shusaku Endo. Thesis, Japanese Literature, Diponegoro University, Semarang. First Advisor Budi Mulyadi, S.Pd., M.Hum, Second Advisor Dewi Saraswati Sakariah, S.S., M.Si.
The purpose of this study is to describe some intrinsic substance and explain the Social Values that reflected in the novel entitled Chinmoku . The data used for this study was obtained from the novel Chinmoku by Japanese author, Shusaku Endo. The method used in this study is literature review by reading relevant references such as books, theses, and scientific journals. This study is a kind of qualitative research which uses sociological approach of literature to find out the social values that reflected in the novel entitled Chinmoku.
This theory is to reveal social values, such as, vital value (fumie, holy water and ship), and spiritual value that divided into 4 (four). First value is Moral value (Discussion to consensus. Helping each other, ). Second value is Religious value (Struggle to spread Christianity, Persistence to hold religion The One Almighty God, Pray, Loyalty to Christianity). And the last value is Aesthetic value ( sense of vision value, sense of smell value, sounds value ).
Keywords: novel, Sociological, Social value, Chinmok
PERBEDAAN PERILAKU AGRESI DAN INTERAKSI SOSIAL PADA NARAPIDANA WANITA BERDASARKAN LAMA MENGHUNI DI LEMBAGA PEMASYARAKATAN WANITA KELAS IIA MALANG
No full textABSTRAK Putri, Febriana Kurnia. 2010. Perubahan Perilaku Agresi dan Interaksi Sosial Pada Narapidana Wanita Berdasarkan Lama Menghuni di Lembaga Pemasyarakatan kelas IIA Malang Program Studi Psikologi. Jurusan Bimbingan Konseling dan Psikologi. Fakultas Ilmu Pendidikan, Universitas Negeri Malang. Pembimbing: (I) Drs. Alwisol, M. Pd (II)Diantiani Ida Viatre, S. Psi, M. Psi. Kata kunci: Perilaku Agresi, Interaksi Sosial, Narapidana Wanita, Lembaga pemasyarakatan Perilaku agresi merupakan masalah yang dihadapi oleh semua orang dalam berbagai setting dan aktivitas sosial. Salah satunya, narapidana yang berada dalam penjara. Keterbatasan akses dalam penjara menyebabkan ketertekanan dan ketidakberdayaan selama menjalani masa penahanan. Ketertekanan dan ketidakberdayaan mengembangkan perilaku maladaptif, salah satunya perilaku agresi. Perilaku agresi mengakibatkan kerugian pada korbannya, kerugian yang diakibatkan tidak hanya luka fisik namun berdampak psikologis. Keterbatasan akses menyebabkan interaksi sosial yang buruk dalam penjara dapat memicu agresi. Maka, upaya meminimalkan perilaku agresi adalah membangun lingkungan yang nyaman dan kondusif bagi individu tersebut. Misalnya dengan membangun hubungan (interaksi) sosial yang baik antar narapidana maupun staff penjara. Lembaga pemasyarakatan merupakan salah satu wadah yang mengisolir narapidana dari dunia luar untuk mendapatkan pengayoman dan pendidikan dalam mengembangkan perilaku adaptif. Lama menghuni lembaga pemasyarakatan memberikan perbedaan perilaku agresi dan interaksi sosial. Lembaga pemasyarakatan membantu narapidana agar dapat berfungsi penuh dalam masyarakat. Berdasarkan uraian diatas peneliti ingin mengetahui apakah ada perbedaan perilaku agresi dan interaksi sosial berdasarkan lama menghuni lembaga pemasyarakatan. Rancangan penelitian yang digunakan adalah penelitian deskriptif komparatif dengan menggunakan metode komparatif, sedangkan pengambilan sampel dilakukan dengan teknik proporsonal sampling. Teknik analisis hipotesis yang digunakan adalah uji Kruskall wallis dan One Way Anova. Jumlah subjek berjumlah 50 narapidana. Penelitian menggunakan skala perilaku agresi dan angket sosiometri interaksi sosial yang dikembangkan oleh peneliti, yang disusun berdasarkan bentuk perilaku agresi dari Bjorkqvist dan sosiometri interaksi social berdasarkan Smollar dan Younis. Hasil penelitian menunjukkan adanya perbedaan perilaku agresi dan interaksi sosial pada narapidana wanita berdasarkan lama menghuni lembaga pemasyarakatan kelas IIA Malang dengan signifikansi pada 0,000
MODEL MAKROEKONOMI TERHADAP PENGGUNAAN ENERGI YANG BERHUBUNGAN DENGAN EMISI KARBON DIOKSIDA (CO2) DI SEKTOR INDUSTRI
Get PDFIt was studied on the macroeconomic model to the use of energy-related CO2 emissions in the industrial sector. The aims of this case study is to modify the macroeconomic models to stabilize carbon dioxide emissions in the atmosphere with the application of energy efficiency technologies in order to minimize the production of carbon dioxide. The parameters measured are gross domestic product, energy consumption of carbon, carbon energy demand, energy intensity of carbon and carbon dioxide produced. The results of the case study show that in 2010-2020 the gross domestic product is predicted to decrease by 0.9% both for "high model" and "low" model, carbon energy demand is predicted to decrease by 1.5% for the case of "high model" and amounted to 4, 4% for the case of "low" model, predicted carbon energy intensity was reduced by 0.5% for the case of "high model" and of 1.5% for the case of "low model", and for the reduction of carbon emissions in production is predicted to decrease by 1.5% in the case of "high model" and was reduced by 4.8% in the case of "low model"
PENGARUH TEMPERATUR INKUBASI DAN JENIS RAGI DALAM PEMBUATAN BIOETANOL DARI LIMBAH KULIT PISANG (Musa Paradisiaca)
Get PDFAs we know, the current energy demand is not proportional to the increasing availability of fuel thinning. Therefore we need a research to get alternative source of renewable energy by utilizing biomass waste like banana peel. In this study is to use banana skin waste in the industrial area of banana processing that has been taken the meat, and the skin is left to rot and become organic fertilizer. The purpose of this research is how the influence of incubation temperature and yeast type on variation of banana skin type to bioethanol content. The research method is by hydrolysis of starch, fermentation, and analysis of bioethanol yield using gas chromatography (GC-FID (Flame Ionization Detector)), shimadzu, Kyoto, 2010). Based on the result of the research, it can be seen that the sample of banana leaf waste (musa balbisiana) produce the most bioethanol with yeast bread type at incubation temperature 30ËšC that is 0,5854%, then banana kepok (paradisiaca L) and king banana leather ( musa sapientum) with each bioethanol content of 0.4587% and 0.4173%As we know, the current energy demand is not proportional to the increasing availability of fuel thinning. Therefore we need a research to get alternative source of renewable energy by utilizing biomass waste like banana peel. In this study is to use banana skin waste in the industrial area of banana processing that has been taken the meat, and the skin is left to rot and become organic fertilizer. The purpose of this research is how the influence of incubation temperature and yeast type on variation of banana skin type to bioethanol content. The research method is by hydrolysis of starch, fermentation, and analysis of bioethanol yield using gas chromatography (GC-FID (Flame Ionization Detector)), shimadzu, Kyoto, 2010). Based on the result of the research, it can be seen that the sample of banana leaf waste (musa balbisiana) produce the most bioethanol with yeast bread type at incubation temperature 30ËšC that is 0,5854%, then banana kepok (paradisiaca L) and king banana leather ( musa sapientum) with each bioethanol content of 0.4587% and 0.4173
THE INFLUENCE OF INCUBATION TEMPERATURE AND TYPE YEAST IN MAKING BIOETHANOL FROM BANANA SKIN WASTE
Get PDFAs we know, the current energy demand is not proportional to the increasing availability of fuel thinning. Therefore we need a research to get alternative source of renewable energy by utilizing biomass waste like banana peel. In this study is to use banana skin waste in the industrial area of banana processing that has been taken the meat, and the skin is left to rot and become organic fertilizer. The purpose of this research is how the influence of incubation temperature and yeast type on variation of banana skin type to bioethanol content. The research method is by hydrolysis of starch, fermentation, and analysis of bioethanol yield using gas chromatography (GC-FID (Flame Ionization Detector)), shimadzu, Kyoto, 2010). Based on the result of the research, it can be seen that the sample of banana leaf waste (musa balbisiana) produce the most bioethanol with yeast bread type at incubation temperature 30ËšC that is 0,5854%, then banana kepok (paradisiaca L) and king banana leather ( musa sapientum) with each bioethanol content of 0.4587% and 0.4173
EFFECT OF BREAD YEAST (SACCHAROMYCES CEREVISEAE) CONCENTRATION AND FERMENTATION TIME IN THE MANUFACTURE OF BIOETHANOL USING BANANA PEEL
Get PDFEnergy needs that are developing at this time are not comparable with the increasing availability of fuel that is running low. Therefore, a study is needed to obtain alternative sources of renewable energy by utilizing biomass waste such as banana peels and so on. In this study, the raw material used was banana peel waste in the industrial area processing bananas that had been taken, and the skin was left to rot and become organic fertilizer. The purpose of this research is to determine whether there is influence of banana skin type to bioethanol content, influence of yeast concentration and fermentation time in bietanol manufacture using banana peel. Based on the research results can be seen that the hights % alcohol content is found in banana peel batu (musa balbisiana)samples with the addition of yeast weight ± 0.0720 gr of 13.6451% then banana peel kepok (musa paradisiaca L) and banana peel raja (musa sapientum) with each % alcohol content of 13.5353% and 12.9953
PENUNTUN PRAKTIKUM FISIKA TEKNIK MODUL 1-15
Get PDFMata kuliah Fisika Terapan adalah mata kuliah yang diberikan pada semester 1 Teknik Kimia Program Studi D IV Teknik Energi Politeknik Negeri Sriwijaya. Mata kuliah ini merupakan mata kuliah teori dan praktek. Mata kuliah ini disusun berdasarkan kurikulum yang berbasis kompetensi di bidanag industri, untuk itu dalam materi praktikum di laboratorium dipilih materi yang terkait erat dengan industri.
Pada penyampaian materi di kelas dan praktikum di laboratorium di sesuaikan dengan perkembangan yang terjadi di industri, sehingga diharapkan dalam proses belajar mengajar pelajaran teori dan praktek saling memperkuat kemampuan penalaran dan keterampilan menangani masalah praktis.
Tim penulis menyampaikan terimakasih kepada semua pihak yang telah banyak membantu dalam penyusunan modul mata kuliah Fisika Teknik ini. Walaupun demikian penulis masih menerima saran dan kritik demi perbaikan buku ini. Akhir kata semoga modul ini dapat bermanfaat
MODEL MAKROEKONOMI TERHADAP PENGGUNAAN ENERGI YANG BERHUBUNGAN DENGAN EMISI CO2 DI SEKTOR INDUSTRI
Get PDFIt was studied on the macroeconomic model to the use of energy related CO2 emissions in the industrial sector. The aims of this case study is to modify the macroeconomic models to stabilize carbon dioxide emissions in the atmosphere with the application of energy efficiency technologies in order to minimize the production of carbon dioxide. the parameters measured are gross domestic product, energy consumption of carbon, carbon energy demand, energy intensity of carbon and carbon dioxide produced. The result of the case study show that in 2010-2020 the gross domestic product is predicted to decrease by 0.9% both for "high model"and "low model", carbon energy demand is predicted to decrease by 1.5% for the case of "high model"and amounted to 4.4% for the case of "low model", predicted carbon energy intensity was reduced by 0.5% for the case of "high model"and of 1.5% for the case of "low model". and for the reduction of carbon emissions in production is predicted to decrease by 1.5 % in the case of "high model"and was reduced by 4.8% in the case of "low model"
Pengaruh teknik sambung pucuk dan waktu defoliasi terhadap pertumbuhan dan keberhasilan sambung pucuk mangga (mangifera indica)
No full textPenelitian ini bertujuan untuk mengetahui pengaruh teknik sambung pucuk dan waktu defoliasi batang atas terhadap keberhasilan dan pertumbuhan sambung pucuk manga (Mangifera indica). Pelitian dilaksanakan di Kebun Benih Hortikultura Sidokerto yang berlokasi di Jalan Raya Pati-Tlogowungu Km 3 Desa Sidokerto, Kecamatan Pati, Kabupaten Pati, Provinsi Jawa Tengah, pada ketinggian 17 mdpl pada bulan Juni sampai September 2022. Penelitian ini menggunakan metode percobaan faktorial berdasar pada Rancangan Acak Kelompok Lengkap (RAKL) yang terdiri atas dua faktor sebagai perlakuan dan tiga kali ulangan sebagai blok. Faktor pertama, teknik sambung pucuk, terdiri atas dua taraf, yaitu T1 (teknik sambung baji) dan T2 (teknik sambung sambatan). Adapun faktor kedua yaitu waktu defoliasi batang atas yang terdiri atas tiga taraf, yaitu D1 (defoliasi saat sambung), D2 (defoliasi pada6 hari sebelum sambung) dan D3 (defoliasi pada 12 hari sebelum sambung). Sehingga dari dua faktor tersebut diperoleh 6 kombinasi. Hasil akhir penelitian ini menunjukkan bahwa teknik sambung pucuk berpengaruh terhadap keberhasilan sambung pucuk manga yaitu pada parameter waktu muncul tunas, presentase muncul tunas dan presentase tanaman hidup, tetapi tidak berpengaruh nyata terhadap pertumbuhan tanaman pada sambung pucuk manga. Waktu defoliasi berpengaruh terhadap keberhasilan dan pertumbuhan pada sambung pucuk manga yaitu pada parameter tinggi tunas, jumlah daun, berat brangkasan segar, presentase muncul tunas dan presentase tanaman hidup. Terjadi interaksi antara Teknik sambung pucuk dan waktu defoliasi terhadap presentase tanaman hidup pada sambung pucuk mangga
Perbandingan Algoritma Stout Code dan Algoritma Fibonacci Code pada Aplikasi Kompresi File Teks Berbasis Android
Get PDFResearch in reducing data size is continuously being carried out. Data compression is the process of converting data into smaller size. There are various data compression algorithms. In this study, the Stout Code and Fibonacci Code algorithms will be used. The author conducted a text file compression test using these two algorithms to compare the performance of the two algorithms. The comparison parameters that will be used are compression ratio, compression time, and decompression time. The tool used to compare is an Android-based application. The test results show that based on the compression ratio, the Stout Code algorithm is better with an average of 1,99 for homogeneous strings and 1,2 for heterogeneous strings while the Fibonacci Code algorithm has an average of 1,99 for homogeneous strings and 1,1 for heterogeneous strings. Based on the compression time, the Fibonacci Code algorithm is better with an average of 13 ms for homogeneous strings and 24,14 ms for heterogeneous strings while the Stout Code algorithm has an average of 14,71 ms for homogeneous strings and 25 ms for heterogeneous strings. Based on the decompression time, the Fibonacci Code algorithm is also better with an average of 40,14 ms for homogeneous strings and 100,71 ms for heterogeneous strings while the Stout Code algorithm has an average of 320,71 ms for homogeneous strings and 517,43 ms for heterogeneous strings. In general, in the compression test of homogeneous and heterogeneous text files, it is found that the Stout Code algorithm is superior in terms of size reduction, while the Fibonacci Code algorithm is superior in terms of speed.83 HalamanSkripsi Sarjan
- …
