1,721,007 research outputs found
Adapting mode switches into the hierarchical scheduling
Get PDFMode switches are used to partition the system’s behavior into different modes to reduce the complexity of large embedded systems. Such systems operate in multiple modes in which each one corresponds to a specific application scenario; these are called Multi-Mode Systems (MMS). A different piece of software is normally executed for each mode. At any given time, the system can be in one of the predefined modes and then be switched to another as a result of a certain condition. A mode switch mechanism (or mode change protocol) is used to shift the system from one mode to another at run-time.
In this thesis we have used a hierarchical scheduling framework to implement a multi-mode system called Multi-Mode Hierarchical Scheduling Framework (MMHSF). A two-level Hierarchical Scheduling Framework (HSF) has already been implemented in an open source real-time operating system, FreeRTOS, to support temporal isolation among real-time components. The main contribution of this thesis is the extension of the HSF featuring a multimode
feature with an emphasis on making minimal changes in the underlying operating system (FreeRTOS) and its HSF implementation. Our implementation uses fixed-priority preemptive scheduling at both local and global scheduling levels and idling periodic servers. It also now supports different modes of the system which can be switched at run-time. Each subsystem and task exhibit different timing attributes according to mode, and upon a Mode Change Request
(MCR) the task-set and timing interfaces of the entire system (including subsystems and tasks) undergo a change. A Mode Change Protocol specifies precisely how the system-mode will be changed. However, an application may not only need to change a mode but also a different mode change protocol semantic. For example, the mode change from normal to shutdown can allow all the tasks to be completed before the mode itself is changed, while changing a mode
from normal to emergency may require aborting all tasks instantly. In our work, both the system mode and the mode change protocol can be changed at run-time. We have implemented three different mode change protocols to switch from one mode to another: the Suspend/resume protocol, the Abort protocol, and the Complete protocol. These protocols increase the flexibility of the system, allowing users to select the way they want to switch to a new mode.
The implementation of MMHSF is tested and evaluated on an AVR-based 32 bit board EVK1100 with an AVR32UC3A0512 micro-controller. We have tested the behavior of each system mode and for each mode change protocol. We also provide the results for the performance measures of all mode change protocols in the thesis.
RESUMEN
Los conmutadores de modo son usados para particionar el comportamiento del sistema en diferentes modos, reduciendo así la complejidad de grandes sistemas empotrados. Estos
sistemas tienen multiples modos de operación, cada uno de ellos correspondiente a distintos escenarios y para distintas aplicaciones; son llamados Sistemas Multimodales (o en inglés “Multi-Mode Systems” o MMS). Normalmente cada modo ejecuta una parte de código distinto.
En un momento dado el sistema, que está en un modo concreto, puede ser cambiado a otro modo distinto como resultado de alguna condicion impuesta previamente. Los mecanismos de cambio de modo (o protocolos de cambio de modo) son usados para mover el sistema de un modo a otro
durante el tiempo de ejecución.
En este trabajo se ha usado un modelo de sistema operativo para implementar un sistema multimodo llamado MMHSF, siglas en inglés correspondientes a (Multi-Mode Hierarchical
Scheduling Framework). Este sistema está basado en el HSF (Hierarchical Scheduling Framework), un modelo de sistema operativo con jerarquía de dos niveles, implementado en un
sistema operativo en tiempo real de libre distribución llamado FreeRTOS, capaz de permitir el aislamiento temporal entre componentes. La principal contribución de este trabajo es la ampliación del HSF convirtiendolo en un sistema multimodo realizando los cambios mínimos
necesarios sobre el sistema operativo FreeRTOS y la implementación ya existente del HSF. Esta implementación usa un sistema de planificación de prioridad fija para ambos niveles de jerarquía, ocupando el tiempo entre tareas con un “modo reposo”. Además el sistema es capaz de
cambiar de un modo a otro en tiempo de ejecución. Cada subsistema y tarea son capaces de tener distintos atributos de tiempo (prioridad, periodo y tiempo de ejecución) en función del modo.
Bajo una demanda de cambio de modo (Mode Change Request MCR) se puede variar el set de tareas en ejecución, así como los atributos de los servidores y las tareas. Un protocolo de cambio de modo espeficica precisamente cómo será cambiado el sistema de un modo a otro. Sin embargo
una aplicación puede requerir no solo un cambio de modo, sino que lo haga de una forma especifica. Por ejemplo, el cambio de modo de “normal” a “apagado” puede permitir a las tareas en ejecución ser finalizadas antes de que se complete la transición, pero sin embargo el cambio de “normal” a “emergencia” puede requerir abortar todas las tareas instantaneamente. En este trabajo ambas características, tanto el modo como el protocolo de cambio, pueden ser cambiadas en tiempo de ejecución, pero deben ser previamente definidas por el desarrollador. Han sido
definidos tres protocolos de cambios: el protocolo “suspender/continuar”, protocolo “abortar” y el protocolo “completar”. Estos protocolos incrementan la flexibilidad del sistema, permitiendo al usuario seleccionar de que forma quieren cambiar hacia el nuevo modo.
La implementación del MMHSF ha sido testada y evaluada en una placa AVR EVK1100, con un micro-controlador AVR32UC3A0. Se ha comprobado el comportamiento de los distintos modos para los distintos protocolos, definidos previamente. Como resultado se proporcionan las medidades de rendimiento de los distintos protocolos de cambio de modo
Hierarchical scheduling for predictable execution of real-time software components and legacy systems
No full textThis dissertation presents techniques to achieve predictable execution of coarse-grained software components and for preservation of temporal properties of components during their integration and reuse. The dissertation presents a novel concept runnable virtual node (RVN) which interaction with the environment is bounded both by a functional and a temporal interface, and the validity of its internal temporal behaviour is preserved when integrated with other components or when reused in a new environment. The realization of RVN exploits techniques for hierarchical scheduling to achieve temporal isolation, and the principles from component-based software-engineering to achieve functional isolation. The proof-of-concept case studies executed on a micro-controller demonstrate the preserving of real-time properties within software components for predictable integration and reusability in a new environment, in both hierarchical scheduling and RVN contexts. Further, a multi-resource server (MRS) is proposed and implemented to enable predictable execution when composing multiple real-time components on a COTS multicore platform. MRS uses resource reservation for both CPU-bandwidth and memory-bus bandwidth to bound the interferences between tasks running on the same core, as well as, between tasks running on different cores. The later could, without MRS, interfere with each other due to contention on a shared memory-bus and memory. The results indicated that MRS can be used to "encapsulate" legacy systems and to give them enough resources to fulfill their purpose. In the dissertation, the compositional schedulability analysis for MRS is also provided and an experimental study is performed to bring insight on the correlation between the server budgets. We believe that the proposed approaches enable a faster software integration and support legacy reuse and that this work transcend the boundaries of software engineering and real-time systems.PPMSchedPROGRES
Towards a Predictable Component-Based Run-Time System
No full textIn this thesis we propose a technique to preserve the temporal properties of realtime components during their integration and reuse. We propose a new concept of runnable virtual node which is a coarse-grained real-time component that provides functional and temporal isolation with respect to its environment. A virtual node’s interaction with the environment is bounded by both a functional and a temporal interface, and the validity of its internal temporal behaviour is preserved when integrated with other components or when reused in a new environment. The first major contribution of this thesis is the implementation of a Hierarchical Scheduling Framework (HSF) on an open source real-time operating system (FreeRTOS) with the emphasis of doing minimal changes to the underlying FreeRTOS kernel and keeping its API intact to support the temporal isolation between a numbers of applications, on a single processor. Temporal isolation between the components during runtime prevents failure propagation between different components. The second contribution of the thesis is with respect to the integration of components, where we first illustrate how the concept of the runnable virtual node can be integrated in several component technologies and, secondly, we perform a proof-of-concept case study for the ProCom component technology where we demonstrate the runnable virtual node’s real-time properties for temporal isolations and reusability. We have performed experimental evaluations on EVK1100 AVR based 32-bit micro-controller and have checked the system behaviour during heavy-load and over-load situations by visualizing execution traces in both hierarchical scheduling and virtual node contexts. The results for the case study demonstrate temporal error containment within a runnable virtual node as well as reuse of the node in a new environment without altering its temporal behaviour.PROGRES
Different Approaches used in Software Product Families
No full textThe use of software in consumer products is growing tremendously in current era. Further the complexity of software in products is growing, diversity increasing, and the lead time is decreasing. To meet all these challenges software reuse in consumer products is the solution. This evolves the concepts of software product family, product population, and product lines. Three different approaches are used to integrate all software within hardware. These three approaches are Integration-Oriented platform, Hierarchal and Composition-Oriented. The integration-oriented approach is a classical approach used for many years in industry but unable to meet the challenges of todays increased usage. Hierarchical and Composition-Oriented approaches are popular now-a-days to meet the challenges of industry
Hierarchical scheduling for predictable execution of real-time software components and legacy systems
No full textThis dissertation presents techniques to achieve predictable execution of coarse-grained software components and for preservation of temporal properties of components during their integration and reuse. The dissertation presents a novel concept runnable virtual node (RVN) which interaction with the environment is bounded both by a functional and a temporal interface, and the validity of its internal temporal behaviour is preserved when integrated with other components or when reused in a new environment. The realization of RVN exploits techniques for hierarchical scheduling to achieve temporal isolation, and the principles from component-based software-engineering to achieve functional isolation. The proof-of-concept case studies executed on a micro-controller demonstrate the preserving of real-time properties within software components for predictable integration and reusability in a new environment, in both hierarchical scheduling and RVN contexts. Further, a multi-resource server (MRS) is proposed and implemented to enable predictable execution when composing multiple real-time components on a COTS multicore platform. MRS uses resource reservation for both CPU-bandwidth and memory-bus bandwidth to bound the interferences between tasks running on the same core, as well as, between tasks running on different cores. The later could, without MRS, interfere with each other due to contention on a shared memory-bus and memory. The results indicated that MRS can be used to "encapsulate" legacy systems and to give them enough resources to fulfill their purpose. In the dissertation, the compositional schedulability analysis for MRS is also provided and an experimental study is performed to bring insight on the correlation between the server budgets. We believe that the proposed approaches enable a faster software integration and support legacy reuse and that this work transcend the boundaries of software engineering and real-time systems.PPMSchedPROGRES
Different Approaches used in Software Product Families [Elektronisk resurs]
No full textThe use of software in consumer products is growing tremendously in current era. Further the complexity of software in products is growing, diversity increasing, and the lead time is decreasing. To meet all these challenges software reuse in consumer products is the solution. This evolves the concepts of software product family, product population, and product lines. Three different approaches are used to integrate all software within hardware. These three approaches are Integration-Oriented platform, Hierarchal and Composition-Oriented. The integration-oriented approach is a classical approach used for many years in industry but unable to meet the challenges of todays increased usage. Hierarchical and Composition-Oriented approaches are popular now-a-days to meet the challenges of industry.</p
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
- …
