33,748 research outputs found
Behaviour of long structures in response to tunnelling
No full textThis paper presents observations of the response of long structures when exposed to tunnelling activities in London Clay. The type of structures varied from a 100 years old masonry arch tunnel to a more modern reinforced concrete frame structure. The common property shared by these structures is that they are long in comparison to the depth beneath them of the tunnels being constructed. Numerical analyses have also been carried out to back analyse the observed data using the London Clay soil parameters. The model was then extended to include a depth and a structural stiffness variable and demonstrate sensitivity to those factors
Logarithmic variance profiles and the corresponding f-1 spectra of temperature fluctuations in turbulent Rayleigh-Bénard convection
No full textWe report experimental results for the temperature variance 2(z) and the corresponding frequency spectra P(f) in turbulent Rayleigh-Bénard convection (RBC) in a cylindrical sample of aspect ratioT= D/L = 1:00 (D = 1:12 m is the diameter and L = 1:12 m the height). The measurements were conducted in the Rayleigh-number range 1011 < Ra < 1:35 1014 and Pr ' 0:8. For Ra = 1:35x1014, 2(z) could be described well by a logarithmic dependence on the vertical position z in a range of z 1 < z < z 2 with z 1 ' 70 and z 2 = 0:1L. Here L=(2Nu) is the thickness of a thin thermal sublayer adjacent to the horizontal plate where the heat flux (denoted by the Nusselt number Nu) is carried mostly by thermal diffusion. In the log layer, we found that the temperature spectra had a significant frequency range over which P(f) f with close to 1. As Ra decreased, increased so that the log layer became thinner. At Ra = 2:05 1011, z 2 < z 1 and therefore there was no range for a log layer. Correspondingly, the temperature spectrum near the horizontal plate did not have the f1 scaling form either
Evidence for the decay B0→J/ψω and measurement of the relative branching fractions of meson decays to J/ψη and J/ψη′
No full textFirst evidence of the B 0 → J / ψ ω decay is found and the B s 0 → J / ψ η and B s 0 → J / ψ η ′ decays are studied using a dataset corresponding to an integrated luminosity of 1.0 fb -1 collected by the LHCb experiment in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV. The branching fractions of these decays are measured relative to that of the B 0 → J / ψ ρ 0 decay:frac(B (B 0 → J / ψ ω), B (B 0 → J / ψ ρ 0)) = 0.89 ± 0.19 (stat) - 0.13 + 0.07 (syst),frac(B (B s 0 → J / ψ η), B (B 0 → J / ψ ρ 0)) = 14.0 ± 1.2 (stat) - 1.5 + 1.1 (syst) - 1.0 + 1.1 (frac(f d, f s)),frac(B (B s 0 → J / ψ η ′), B (B 0 → J / ψ ρ 0)) = 12.7 ± 1.1 (stat) - 1.3 + 0.5 (syst) - 0.9 + 1.0 (frac(f d, f s)), where the last uncertainty is due to the knowledge of f d / f s, the ratio of b-quark hadronization factors that accounts for the different production rate of B 0 and B s 0 mesons. The ratio of the branching fractions of B s 0 → J / ψ η ′ and B s 0 → J / ψ η decays is measured to befrac(B (B s 0 → J / ψ η ′), B (B s 0 → J / ψ η)) = 0.90 ± 0.09 (stat) - 0.02 + 0.06 (syst)
Erratum to: Effect of moderate red wine intake on cardiac prognosis after recent acute myocardial infarction of subjects with Type 2 diabetes mellitus (Diabetic Medicine, (2006), 23, 9, (974-981), 10.1111/j.1464-5491.2006.01886.x)
No full textIn an article by Marfella et al, the author name C. Saron is incorrect and should be listed as C. Sardu. Therefore the correct author list is: R. Marfella, F. Cacciapuoti, M. Siniscalchi, F. C. Sasso, F. Marchese, F. Cinone, E. Musacchio, M. A. Marfella, L. Ruggiero, G. Chiorazzo, D. Liberti, G. Chiorazzo, G. F. Nicoletti, C. Sardu, F. D'Andrea, C. Ammendola, M. Verza and L. Coppola.In an article by Marfella et al, the author name C. Saron is incorrect and should be listed as C. Sardu. Therefore the correct author list is: R. Marfella, F. Cacciapuoti, M. Siniscalchi, F. C. Sasso, F. Marchese, F. Cinone, E. Musacchio, M. A. Marfella, L. Ruggiero, G. Chiorazzo, D. Liberti, G. Chiorazzo, G. F. Nicoletti, C. Sardu, F. D'Andrea, C. Ammendola, M. Verza and L. Coppola
Quando Spinoza «uscì dalla sua tomba». Tre scritti di F. D. E. Schleiermacher
No full textThe essay deals with the Spinoza-Studien (17893-4) redacted by F. D. E. Schleiermacher as a comment on Jacobi’s Ueber die Lehre des Spinoza in Briefen an den Herrn Moses Mendelssohn (1785). The Author considers those manuscripts important for both Schleiermacher’s intellectual development and the German romantic debate on atheism and religion. If the idealist thinkers try to theorize, from Spinoza’s metaphysics, a science of the absolute, and Jacobi elaborates a doctrine of “salto mortale” beyond science, Schleiermacher believes that Spinoza’s philosophy can help to develop the transcendental perspective. Instead of Jacobi’s “salto mortale”, he proposed the conception of the Inerenz of finite to infinite, and instead of the idealistic science of the absolute, he emphasises the immediate feeling of being. The deterministic ethic theorized in the “Rapsodien” (1789-93) can be in this way accorded “tangentially” to a mystic doctrine of the infinite
1ST MEASUREMENT OF GAMMA(D(S)(+)-]MU+NU)/GAMMA(D(S)(+)-]PHI-PI+)
No full textComplete Author List:
ACOSTA D, ATHANAS M, MASEK G, PAAR H, BEAN A, GRONBERG J, KUTSCHKE R, MENARY S, MORRISON RJ, NAKANISHI S, NELSON HN, NELSON TK, RICHMAN JD, RYD A, TAJIMA H, SCHMIDT D, SPERKA D, WITHERELL MS, PROCARIO M, YANG S, BALEST R, CHO K, DAOUDI M, FORD WT, JOHNSON DR, LINGEL K, LOHNER M, RANKIN P, SMITH JG, ALEXANDER JP, BEBEK C, BERKELMAN K, BESSON D, BROWDER TE, CASSEL DG, CHO HA, COFFMAN DM, DRELL PS, EHRLICH R, GALIK RS, GARCIASCIVERES M, GEISER B, GITTELMAN B, GRAY SW, HARTILL DL, HELTSLEY BK, JONES CD, JONES SL, KANDASWAMY J, KATAYAMA N, KIM PC, KREINICK DL, LUDWIG GS, MASUI J, MEVISSEN J, MISTRY NB, NG CR, NORDBERG E, OGG M, PATTERSON JR, PETERSON D, RILEY D, SALMAN S, SAPPER M, WORDEN H, WURTHWEIN F, AVERY P, FREYBERGER A, RODRIGUEZ J, STEPHENS R, YELTON J, CINABRO D, HENDERSON S, KINOSHITA K, LIU T, SAULNIER M, SHEN F, WILSON R, YAMAMOTO H, ONG B, SELEN M, SADOFF AJ, AMMAR R, BALL S, BARINGER P, COPPAGE D, COPTY N, DAVIS R, HANCOCK N, KELLY M, KWAK N, LAM H, KUBOTA Y, LATTERY M, NELSON JK, PATTON S, PERTICONE D, POLING R, SAVINOV V, SCHRENK S, WANG R, ALAM MS, KIM IJ, NEMATI B, ONEILL JJ, SEVERINI H, SUN CR, ZOELLER MM, CRAWFORD G, DAUBENMIER CM, FULTON R, FUJINO D, GAN KK, HONSCHEID K, KAGAN H, KASS R, LEE J, MALCHOW R, MORROW F, SKOVPEN Y, SUNG M, WHITE C, WHITMORE J, WILSON P, BUTLER F, FU X, KALBFLEISCH G, LAMBRECHT M, ROSS WR, SKUBIC P, SNOW J, WANG PL, WOOD M, BORTOLETTO D, BROWN DN, FAST J, MCILWAIN RL, MIAO T, MILLER DH, MODESITT M, SCHAFFNER SF, SHIBATA EI, SHIPSEY IPJ, WANG PN, BATTLE M, ERNST J, KROHA H, ROBERTS S, SPARKS K, THORNDIKE EH, WANG CH, DOMINICK J, SANGHERA S, SHELKOV V, SKWARNICKI T, STROYNOWSKI R, VOLOBOUEV I, ZADOROZHNY P, ARTUSO M, HE D, GOLDBERG M, HORWITZ N, KENNETT R, MONETI GC, MUHEIM F, MUKHIN Y, PLAYFER S, ROZEN Y, STONE S, THULASIDAS M, VASSEUR G, ZHU G, BARTELT J, CSORNA SE, EGYED Z, JAIN V, SHELDON P, AKERIB DS, BARISH B, CHADHA M, CHAN S, COWEN DF, EIGEN G, MILLER JS, OGRADY C, URHEIM J, WEINSTEIN A
[Lease D and F renewal request] circa 1942-1949
No full textRequest to renew leases D and F for Harry Toye
Numerical analysis of a 3-D printed porous trailing edge for broadband noise reduction
No full textLattice Boltzmann simulations were carried out to investigate the noise mitigation mechanisms of a 3-D printed porous trailing-edge insert, elucidating the link between noise reduction and material permeability. The porous insert is based on a unit cell resembling a lattice of diamond atoms. It replaces the last 20 % chord of a NACA 0018 at zero angle-of-attack. A partially blocked insert is considered by adding a solid partition between 84 % and 96 % of the aerofoil chord. The regular porous insert achieves a substantial noise reduction at low frequencies, although a slight noise increase is found at high frequencies. The partially blocked porous insert exhibits a lower noise reduction level, but the noise emission at mid-to-high frequency is slightly affected. The segment of the porous insert near the tip plays a dominant role in promoting noise mitigation, whereas the solid-porous junction contributes, in addition to the rough surface, towards the high-frequency excess noise. The current study demonstrates the existence of an entrance length associated with the porous material geometry, which is linked to the pressure release process that is responsible for promoting noise mitigation. This process is characterised by the aerodynamic interaction between pressure fluctuations across the porous medium, which is found at locations where the porous insert thickness is less than twice the entrance length. Present results also suggest that the noise attenuation level is related to both the chordwise extent of the porous insert and the streamwise turbulent length scale. The porous inserts also cause a slight drag increase compared to their solid counterpart. Wind Energ
Postać n-tej iteracji operatora q = f d/dx
No full textArtykuł nie zawiera streszczeniaMotivated by applications in linear dynamical systems, the author studies q^n(f), where q is the operator f●(d/dx) and qn is its n-th iteration. q^n(f) is a polynomial F(f(0),f(1),...,f(n)) in the derivatives f(0)=f,...,f(n) of f with integer coefficients. Special attention is paid to determining the coefficients of F. The author presents algorithms for computing the coefficients and also shows that the sum of all coefficients of F equals n!. The paper ends with some remarks on the number of coefficients of F, which is related to the number-theoretic unrestricted partition function
Unsupervised author identification and characterization
No full textAuthor identification is a hot topic, especially in the Internet age. Following our previous work in which we proposed a novel approach to this problem, based on relational representations that take into account the structure of sentences, here we present a tool that computes and visualizes a numerical and graphical characterization of the authors/texts based on several linguistic features. This tool, that extends a previous language analysis tool, is the ideal complement to the author identification technique, that is based on a clustering procedure whose outcomes (i.e., the authors’ models) are not human-readable. Both approaches are unsupervised, which allows them to tackle problems to which other state-of-the-art systems are not applicable
- …
