1,720,964 research outputs found
Analisis Penerapan Fatonah, Amanah, Shiddiq, dan Tabliqh pada Sistem Pemasaran di Bank Syariah Mandiri KCP Padang Bulan Medan
No full textPenelitian ini dilakukan pada PT. Bank Syariah Mandiri KCP Padang Bulan Medan
dengan tujuan untuk mengetahui bagaimana strategi yang dilakukan oleh PT. Bank Syariah
Mandiri KCP Padang Bulan Medan menerapkan sifat fatonah, amanah, shiddiqh, dan tabliq
dalam sistem pemasaran kepada masyarakat luas serta mempertahankan sifat pemasaran
Islami di setiap kegiatan pemasaran.
Metodologi penelitian yang digunakan dalam penelitian penerapan fatonah, amanah,
shiddiq, dan tabliqh pada sistem pemasaran ini adalah metode Kualitatif yang menggunakan
data primer yang diperoleh dari hasil wawancara langsung dengan pihak PT. Bank Syariah
Mandiri KCP Padang Bulan Medan.
Permesalahan dalam penelitian ini adalah tentang bagaimana penerapan fatonah,
amanah, shiddiq, dan tabliqh pada sistem pemasaran di PT.Bank Syariah Mandiri KCP
Padang Bulan Medan. Bagaimana strategi penerapan fatonah, amanah, shiddiq, dan tabliqh
pada sistem pemasaran di PT.Bank Syariah Mandiri KCP Padang Bulan Medan.
Berdasarkan hasil penelitian dapat disimpulkan bahwa PT. Bank Syariah Mandiri KCP
Padang Bulan Medan menerapkan berbagai hal untuk mempermudah pemasaran yang
berdasarkan fatonah, amanah, shiddiq, dan tabliqh terhadap nasabah, Marketing dan staff
pada PT. Bank Syariah Mandiri KCP Padang Bulan Medan dapat dikatakan sudah
menerapkan pemasaran Islami tersebut akan tetapi penerapan dari keempat hal tersebut masih
belum dilakukan oleh pegawai secara optimal, sehingga berpengaruh terhadap kepercayaan
dan minat nasabah terhadap marketing di Bank Syariah Mandir
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Kajian Karakteristik Struktur Drive RIB pada Komponen Sayap Pesawat Terbang dengan Metode Komputasional Dinamika Fluida
Full text linkRibs on aircraft wing components function to hold and distribute the force received by the aircraft wing evenly. When assembling aircraft wing components, the drive rib will be fixed-supported on the spar, so the drive rib will experience a force (load) from its own weight. This study aims to analyze the aerodynamic characteristics of the drive rib to be able to determine the model of lift and angle of attack on the components of the aircraft wing. Another objective is to analyze the maximum stress and safety factor of variations in drive rib components based on the type of material Aluminum Alloy 7010, 7050 T7651 and 7075 T6. The design used in this study is to determine the angles of attack (α) = 0°, 5°, 8°, 10°, 12°, 15°, 16°, 17°, 20° to the optimal limit angle at flight speed conditions v=250 m/s respectively for altitude H=9,000 m, 11,000 m, 13,000 m, 14,000 m, 15,000 m, 16,000 m, 17,000 m, 18,000 m, atmospheric pressure Pa=16,000 Pa, atmospheric temperature Ta=217 K, and the density of air ρ=0.2556 kg/m3. The simulation is carried out by computational fluid dynamic method for successive angles of attack from which the lift value decreases rapidly. The results of the flight altitude test estimate the maximum wing flight altitude of the aircraft, namely Hmax = 16,625.77 m. The maximum stress value received by the drive rib is 45,886 MPa, this value concludes that this value is much smaller than the yield stress of the Aluminum Alloy material of 530 MPa with a safety factor of 10.8. This test method can be used to analyze any aircraft construction.126 HalamanTesis Magiste
Kajian Karakteristik Struktur Drive RIB pada Komponen Sayap Pesawat Terbang dengan Metode Komputasional Dinamika Fluida
Full text linkRibs on aircraft wing components function to hold and distribute the force received by the aircraft wing evenly. When assembling aircraft wing components, the drive rib will be fixed-supported on the spar, so the drive rib will experience a force (load) from its own weight. This study aims to analyze the aerodynamic characteristics of the drive rib to be able to determine the model of lift and angle of attack on the components of the aircraft wing. Another objective is to analyze the maximum stress and safety factor of variations in drive rib components based on the type of material Aluminum Alloy 7010, 7050 T7651 and 7075 T6. The design used in this study is to determine the angles of attack (α) = 0°, 5°, 8°, 10°, 12°, 15°, 16°, 17°, 20° to the optimal limit angle at flight speed conditions v=250 m/s respectively for altitude H=9,000 m, 11,000 m, 13,000 m, 14,000 m, 15,000 m, 16,000 m, 17,000 m, 18,000 m, atmospheric pressure Pa=16,000 Pa, atmospheric temperature Ta=217 K, and the density of air ρ=0.2556 kg/m3. The simulation is carried out by computational fluid dynamic method for successive angles of attack from which the lift value decreases rapidly. The results of the flight altitude test estimate the maximum wing flight altitude of the aircraft, namely Hmax = 16,625.77 m. The maximum stress value received by the drive rib is 45,886 MPa, this value concludes that this value is much smaller than the yield stress of the Aluminum Alloy material of 530 MPa with a safety factor of 10.8. This test method can be used to analyze any aircraft construction.126 HalamanTesis Magiste
PENGARUH AUDIT TENURE, UKURAN KAP, DAN STRUKTUR KEPEMILIKAN PERUSAHAAN TERHADAP KUALITAS AUDIT DENGAN SPESIALISASI AUDITOR SEBAGAI VARIABEL MODERATING
Full text linkMUHAMMAD RIZKY ANANDA. Pengaruh Audit Tenure, Ukuran KAP, dan
Struktur Kepemilikan Perusahaan Terhadap Kualitas Audit Dengan Spesialisasi
Auditor Sebagai Variabel Moderating. Skripsi, Jakarta: Fakultas Ekonomi,
Universitas Negeri Jakarta, 2023.
Penelitian ini bertujuan untuk Penelitian ini bertujuan untuk mengetahui pengaruh
audit tenure, ukuran kap, dan struktur kepemilikan perusahaan terhadap kualitas
audit dengan spesialisasi auditor sebagai variabel moderating. Dalam penelitian ini,
populasi yang digunakan adalah perusahaan yang berada pada sektor transportasi &
logistik yang terdaftar di BEI selama periode 2018 – 2020.
Hasil dari penelitian ini menunjukan, bahwa nilai signifikan daripada variabel audit
tenure sebesar 0,165 dan dengan hasil tersebut menunjukkan nilai yang lebih besar
daripada nilai signifikansi yang digunakan pada panelitian ini yaitu 0,05, sehingga
berdasarkan hasil penemuan tersebut dapat disimpulkan bahwa audit tenure tidak
berpengaruh terhadap kualitas audit.
Kata Kunci: Audit Tenure, Ukuran KAP, Kualitas Audit, Spesialisasi Auditor,
Variabel Moderatin
Analisa Karakteristik dan Termoekonomik pada Lemari Pengering Pakaian dengan Pemanfaatan Panas Buangan Kondensor AC Split 1 PK
No full textSumber energi utama dari mesin pengering pakaian buatan yang umum di
masyarakat adalah bahan bakar gas dan listrik. Sementara panas buang dari sistem
Air Conditioner masih relatif tinggi. Panas buang dapat dimanfaatkan sebagai
energi alternatif. Penelitian ini bertujuan mengetahui nilai konsumsi energi
spesifik dan nilai termoekonomik dari masing-masing bahan. Mesin pengering
memanfaatkan panas buang Air Conditioner daya 1 PK. Komponen yang
dimanfaatkan adalah kondensor. Manfaat penelitian untuk menciptakan mesin
pengering pakaian yang mudah dipasang dan tidak terpengaruh cuaca. Variabel
penelitian ini adalah bahan pakaian yang bervariasi. Hasil penelitian ini diperoleh
laju pengeringan terbesar adalah 0,1734kg/jam untuk bahan polyester 100%.
SMER terbesar adalah 0,1971kg/kWh untuk bahan polyester 100% dan besarnya
SEC terbesar adalah 6,7600 kWh/kg untuk bahan cotton 100%. Efisiensi
pengeringan terbesar adalah 17% untuk bahan polyester 100%. Nilai
termoekonomik terbesar adalah Rp 9.147,36/kg untuk bahan cotton 100%.Main energy source from clothes dryer machine which is common in society are
from gas fuel and electricity. Waste heat from Air Conditioning System relatively
high. Waste heat can be exploited into alternative energy. Study intended to
calculate value of dryer Specific Energy Consumption and Thermoeconomic from
each object. Dryer machine exploit Air Conditioner with 1 PK power waste heat.
Utilized component is the condenser. Study benefits creating easy to install
clothes dryer machine and isn’t weather affected. Research variable is the
variation of the clothes material. Result from study obtain the highest drying rate
value by 0,1734kg/hours for polyester 100%. SMER highest value is
0,1971kg/kWh for polyester 100% and SEC highest value is 6,7600 kWh/kg for
cotton 100%. Highest drying efficiency value is 17% for polyester 100%. Highest
thermoeconomics value is Rp 9.147,36/kg for cotton 100%.Skripsi Sarjan
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
- …
