3036 research outputs found
Sort by
Measurement of singly Cabibbo-suppressed decays D -> omega pi pi
Using 2.93 fb(-1) of e(+) e(-) collision data taken at a center-of-mass energy of 3.773 GeV by the BESIII detector at the BEPCII, we measure the branching fractions of the singly Cabibbo-suppressed decays D -> omega pi pi to be B(D-0 -> omega pi(+) pi(-)) = (1.33 +/- 0.16 +/- 0.12) x 10(-3) and B(D+ -> omega pi(+)pi(0)) = (3.87 +/- 0.83 +/- 0.25) x 10(-3), where the first uncertainties are statistical and the second ones systematic. The statistical significances are 12.9 sigma and 7.7 sigma, respectively. The precision of B(D-0 -> omega pi(+) pi(-)) is improved by a factor of 2.1 over prior measurements, and B(D+ -> omega pi(+) pi(0)) is measured for the first time. No significant signal for D-0 -> omega pi(0)pi(0) is observed, and the upper limit on the branching fraction is B(D-0 -> omega pi(0)pi(0)) eta pi pi are also measured and consistent with existing results
NATO's Military Structure: Change and Continuity
The military structure of NATO is of two components; command and the force structure. Command structure comprises military headquarters responsible for the command and control of the military forces. Force structure of the Alliance is made up of forces allocated to NATO by member states. The Alliance has experienced four major transformative steps in command structure since its establishment. The initial force structure of the Alliance which covers all allocated forces including the fixed ones to NATO has gradually transformed to deployable (movable) force structure by three subsequent changes after the Cold War. The new force structure is set based upon considerations on a gradual readiness level. This paper deals with the historical changes and continuity of NATO's both command and force structures'transformation and their justifications -which have been rarely studied academically. Based upon this knowledge adequacy, effectiveness and rationality of both structures are scrutinised. The argument of the paper is that throughout NATO's past the military structures has not only been a result of organizational change but also one of the main causes and determinants for the evolution and transformation of the Alliance
An investigation of the psychosocial and demographic determinants of anxiety and hopelessness during COVID-19 pandemic
Objective: COVID-19, which has spread rapidly around the world since December 2019, has been defined as an infectious disease by the World Health Organization. Infection and mortality rates from COVID-19 are high and the COVID-19 pandemic has many negative impacts in health, economic and security fields. The aim of this study is therefore to examine the psychosocial and demographic determinants of anxiety and hopelessness during the COVID-19 pandemic among Turkish population. Method: The study group of the research consists of 1026 participants between the ages of 18 and 65 years. Personal Information Form, Beck Hopelessness Scale and Beck Anxiety Scale were used for data collection. Results: The majority of the participants reported that both national and global health, economic, and security precautions were not sufficient in fight against COVID-19 pandemic. About one in four participants had symptoms of moderate to severe anxiety and about one in three had symptoms of moderate to severe hopelessness. Women had significantly higher levels of anxiety compared to men. Participants who reported that the health, economics, and safety precautions were not adequate had higher levels of anxiety and hopelessness than those who reported that the precautions were adequate. Discussion: Given that the COVID-19 pandemic is associated with negative psychological and social consequences, the preventive programs for mental health should be promoted and the psychosocial support services should be made available to everyone in the society. © 2020 ANP Publishing. All rights reserved
Pazarlama Bilim Dalında Yazılmış Yüksek Lisans ve Doktora Tezlerinin Bibliyometrik Profilinin İncelenmesi
Çalışmada, 2010-2020 yılları arasında “Pazarlama Bilim Dalı”’nda yazılmış Yüksek lisans ve Doktora
tezlerinin; çeşitli parametreler çerçevesinde bibliyometrik özelliklerinin belirlenmesi amaçlanmıştır.
Pazarlama alan yazının genel özelliklerini ortaya koymak ve bu alanda çalışacak araştırmacılara kolaylık
sağlamak da araştırmanın bir diğer amacını oluşturmaktadır. Bu amaçla, tezler bazı bibliyometrik
özellikler (örneğin; tez türü, yayın yılı, yürütüldüğü üniversite, tez konusu, araştırma yöntemi, veri tipi, veri
toplama yöntemi, analiz tekniği, ölçek türü, anakütle, örnekleme yöntemi, örneklem hacmi, yayın durumu,
atıf sayısı) açısından incelenmiştir. Çalışmada içerik analizi yöntemi kullanılmış, 558 tez belirlenen
kriterler doğrultusunda incelenerek mevcut durum ortaya konulmuştur. Araştırma bulgularına göre,
tezlerin neredeyse tamamının uygulamalı olduğu; bu çalışmalarda da nicel araştırma yöntemlerinin daha
fazla kullanıldığı, nitel ve karma araştırma yöntemlerinin daha az kullanıldığı saptanmıştır. Kullanılan
verilerin çoğu birincil veri olurken, bu veriler daha çok “kolayda örneklem yöntemi” ile seçilen
“tüketicilerden” “anket” aracılığıyla toplanmıştır. Sonuçlar göre; en fazla “Tüketici Davranışları”,
“Marka ve Marka Yönetimi” ve “Pazarlama İletişimi” konularında çalışma yapılmıştır. Tezlerin büyük
çoğunluğunda araştırma hipotezleri ve araştırmanın modeli yer aldığı tespit edilmiştir. Faktör analizi ve
Varyans analizi (ANOVA) en çok tercih edilen analiz tekniği olurken; Likert Tipi Ölçeği de en çok
kullanılan ölçek türü olmuştur. Diğer taraftan tezlerin yarısından fazlasında ön test bulgusuna
rastlanılmaması dikkat çekmektedir. Tezlerin büyük çoğunluğunda yabancı kaynaklardan yararlanılmıştır.
Son olarak ulaşılabilen kaynaklar kapsamında tezlerin çok düşük bir kısmının başka bir akademik
çalışmaya (makale ve bildiri) dönüştürüldüğü ve atıf sayılarının da görece düşük olduğu tespit edilmiştir.
Çalışma sonucunda elde edilen bulguların Pazarlama yazınının konumunu ortaya koymada ve gelecek
çalışmalara ışık tutmada katkı sağladığı düşünülmektedi
Building a hybrid algorithm based decision support system to prevent ship collisions
Decision support systems constitute the focus of many studies in the maritime industry as vessel accidents are often caused by human errors. In this study, an anti-collision decision support system is proposed. The system consists of three main parts. An artificial neural network system capable of predicting the forward position of ships, a fuzzy logic system that calculates which of the surrounding ships is at greater risk of collision, and a collision avoidance route using the CSGA (Cuckoo Search-Genetic Algorithm) algorithm. In this study, scenarios have been created in order to measure the success of collision prevention system. The CSGA algorithm used in the calculation of collision prevention routes and the ACO (Ant Colony Optimization), PSO (Particle Swarm Optimization), and GA (Genetic Algorithm) algorithms previously used in the literature were also used for calculation and the results compared in terms of efficiency. While measuring the efficiency of algorithms; the time spent on the calculation and the efficiency of the recommended collision avoidance routes are considered. In the collision avoidance system with the CSGA algorithm, on average, the calculation times were 29.47 times faster than ACO, 5.78 times faster than PSO, and 2.72 times faster than GA. Considering the appropriateness of the paths calculated by the algorithms, the CSGA algorithm has found an average of %7. 85 in comparison to PSO, %2.62 in comparison to PSA, and %1.18 in comparison to GA
First Observation of D+ -> eta mu(+)nu(mu) and Measurement of Its Decay Dynamics
By analyzing a data sample corresponding to an integrated luminosity of 2.93 fb(-1) collected at a center-of-mass energy of 3.773 GeV with the BESIII detector, we measure for the first time the absolute branching fraction of the D+ -> eta mu(+) nu(mu) decay to be BD+ ->eta mu+nu mu = (10.4 +/- 1.0(stat) +/- 0.5(syst)) x 10(-4). Using the world averaged value of BD+ ->eta e+nu e, the ratio of the two branching fractions is determined to be = BD+ ->eta mu+nu mu/BD+ ->eta e+nu e =0.91 +/- 0.13((stat+syst)), which agrees with the theoretical expectation of lepton flavor universality within uncertainty. By studying the differential decay rates in five four-momentum transfer intervals, we obtain the product of the hadronic form factor f(+)(eta)(0) and the c -> d Cabibbo-Kobayashi-Maskawa matrix element vertical bar V-cd vertical bar to be f(+)(eta)(0)vertical bar V-cd vertical bar = 0.087 +/- 0.008(stat) +/- 0.002(syst). Taking the input of vertical bar V-cd vertical bar from the global fit in the standard model, we determine f(+)(eta)(0) = 0.39 +/- 0.04(stat) +/- 0.01(syst). On the other hand, using the value of f(+)(eta)(0) calculated in theory, we find vertical bar V-cd vertical bar= 0.242 +/- 0.022(stat )+/- 0.006(syst) +/- 0.033(theory)
Frequency-Dependent Admittance Analysis of Au/n-Si Structure with CoSO4-PVP Interfacial Layer
A film of cobalt sulfate (CoSO4)-doped polyvinylpyrrolidone (PVP) blend was spin-coated on n-Si. Electrical measurements were conducted on the Au/n-Si structure with the CoSO4-PVP film sandwiched between them. The frequency dispersion of the main electrical and dielectric parameters and the corresponding mechanisms were evaluated. The extra capacitance originating from the contribution of interface states (N-ss) resulted in a fairly large frequency dispersion in C-V plots. These states also influence the carrier transport and conduction mechanism, thus the determination of real N-ss values is crucial to evaluate the nonideal behavior of such plots. The values of N-ss were calculated using the Hill-Coleman method. The dielectric constant (epsilon ') and dielectric loss (epsilon '') exhibited higher values in the low-frequency region as a result of interface and dipole polarization, while the alternating-current (AC) electrical conductivity (sigma(ac)) generally decreased. The variation of the loss tangent with increasing frequency of the applied field confirmed the effect of some internal field within the CoSO4-PVP film accompanied by the external AC field
G-7 ve E-7 Ülkelerinde Lojistik Performans, Ekonomik Büyüme ve Finansal Gelişme İlişkisi
Lojistik bir ürünün ilk üreticiden son tüketiciye ulaşana kadar kadar
gerçekleşen nakliye, depolama, gümrükleme, amblajlama, dağıtım gibi
süreçleri ifade eder. Küreselleşme ile birlikte önemi günden güne hızla artan
lojisitik sektörü ülkelerin kalkınmalarında büyük bir rol oynamaktadır.
Özellikle günümüzde ülkeler arasında artan uluslarası ticaret faaliyetleri
lojistik sektörünün önemini daha da artımıştır. Yine gelişen sanayi ve bunun
için gerekli olan hammdelerin nakliyesinde de (demir, çelik, petrol vb.)
lojisitk sektörü önemli bir rol oynamaktadır. Bu çalışmanın amacı, 2007-2018
dönemi için E-7 ülkeleri ve G-7 ülkeleri için lojistik performans, ekonomik
büyüme ve finansal kalkınma arasındaki ekonometrik ilişkiyi incelemektir.
Bu amaçla E-7 ülkeleri ve G-7 ülkeleri ile ilgili toplam dört model
oluşturulmuş ve modellerde uzun vadeli ilişki ve uzun vadeli katsayılar
incelenmiştir. Bulgulara göre; E-7 ülkeleri için finansal gelişme ile lojistik
performans endeksi arasında uzun vadeli bir ilişki olmadığı tespit edilmiştir.
G-7 ülkelerinde ise yüksek finansal derinlik nedeniyle finansal gelişme ile
lojistik performans arasında uzun vadeli bir ilişki olduğu tespit edilmiş,
ancak uzun vadeli ilişki katsayısı istatistiksel olarak anlamsızdır. Hem G-7
ülkeleri hem de E-7 ülkeleri için ekonomik büyüme ile lojistik performans
arasında uzun vadeli bir ilişki olduğu tespit edilmiştir. Bununla birlikte, E-7
ülkeleri için uzun vadeli ilişki katsayısı istatistiksel olarak önemsizken,
lojistik performans endeksinin G-7 ülkelerindeki ekonomik büyümeyi
olumlu etkilediği görülmüştür. Bu bağlamda, politika perspektifinden
bakıldığında, lojistik altyapısına yapılan yatırımın, ülkelerde gelecekteki
ekonomik büyüme ve finansal büyüme için yüksek getirilere sahip
olabilecek en faydalı yatırım olacağı unutulmamalıdır. Bu yüzden politika
yapıcların lojisitik konusuna gereken önemi vermeleri ve gerekli politikları
geliştimeleri ekonomik büyüme ve finansal gelişme için elzemdir
XV. Yüzyıl Şairlerinden Kemâl Ümmî’nin Kırk Armağan Mesnevisi
XV. yüzyıl, Necâtî, Avnî, Adlî, Mihrî Hatun, Mesihî, Hamdullah Hamdî gibi önemli
şairlerin yetiştiği bir devirdir. XVI. yüzyılın sanat anlayışına zemin hazırlayan bu yüzyılın
şairleri arasında asıl adı İsmail olan Kemâl Ümmî de bulunmaktadır.
Kemâl Ümmî, Anadolu sahasında tekke tasavvuf edebiyatı çizgisinde ilerlemiş
mutasavvıf bir şairdir. Şairin, Türkiye’deki kütüphanelerde otuzdan fazla el yazması olan
Dîvân’ının dışında müstakil olarak kaleme aldığı eserleri de bulunur. Bunlar arasında
Risâle-i Vefât, Risâle-i Îmân ile büyük çoğunluğu şairin Dîvân’ı içinde yer alan Kırk
Armağan adlı mesnevisi vardır. Didaktik mesneviler içerisinde kabul edilebilecek olan bu
mesnevilerde şair, dinleyen ve okuyan kesimi doğru yola yönlendirecek tavsiyelerde
bulunur.
Bu mesnevilerden Kırk Armağan, eserin üslubu ve dili yönüyle diğerlerinden daha
fazla dikkat çekmektedir. Eser bazı kaynaklarda Kırk Hadis türünün ilk örnekleri arasında
gösterilirken bazı kaynaklarda bir hadisin şerhi olarak değerlendirilmiştir. Mesnevide şair,
ölümünü isteyen bir adam ile Hz. Muhammed arasında geçen konuşmayı anlatır ve ikisi
arasında geçen uhrevi seyahati gözler önüne serer. Bu yolculuk on menzil üzerine
kurulmuştur. Her menzilde ölümünü isteyen adamın hazırlaması gereken dörder armağan
bulunur. Eser bu sebepten Kırk Armağan adını taşır. Kırk Armağan, 210 beyitten
oluşmasına rağmen olay, zaman, kişi ve mekân gibi tahkiye unsurlarının tamamını içinde
barındırmaktadır.
Çalışmada Kırk Armağan’ın Türkiye’deki kütüphanelerde tespit edilmiş üç nüshası
tenkitli metin olarak hazırlanmış, beyitler nesre çevirileriyle sunulmuştur. Metin Eski
Anadolu Türkçesinin dil özellikleri bakımından incelenmiştir. Metinde geçen atasözleri,
deyimler tespit edilmiş, söz varlığına değinilerek dil araştırmacıları için katkı sunulmaya
ve eserin türü konusunda yeni bir görüş geliştirilmeye çalışılmıştır
Atıksu İnşaat ve Tesisat İhalelerinde Yüklenici Seçimine Alternatif Çözüm Önerisi
Atıksu inşaat ve tesisat işlerinde genellikle kullanılan teklif birim fiyat ihale yöntemine göre; yükleniciler kendi strateji ve hedefleri doğrultusunda bazı pozlar için
yüksek fiyat indirimleri teklif ederken bazı pozlar için ise yüksek fiyat artışları teklif
ederek dengesiz teklif durumu oluştururlar. Bu durumda yüksek fiyat teklif edilen
pozlardan daha fazla, düşük fiyat teklif edilen pozlardan ise daha az ya da daha
düşük kalitede imalat yapma eğilimi olabilmektedir. Bu çalışmada; klasik kullanılan yönteme alternatif olarak bir puanlama sistemi oluşturulmuş, oluşturulan bu
yöntemle ihalesi yapılan işe ait birim fiyat teklif cetvelinde yer alan pozlara sunulan
aşırı düşük ya da yüksek tekliflerin yüksek puan alması engellenerek ortalamaya yakın teklif veren yüklenicilerin daha yüksek puan alması hedeflenmiştir. Bu yöntemle;
ihale teklif fiyatlarının daha dengeli bir şekilde oluşturulabileceği işin kalitesinin
arttırılabileceği, yüklenici iflası gibi durumlarda yüklenicilik ifasının kesintiye uğramasını önleme konusunda fayda sağlanabileceği düşünülmektedi