1,721,051 research outputs found
Forecasting selectivity of Au-based partial oxidation catalysts via temperature programmed desorption studies on the Au(111) model catalyst
No full textCataloged from PDF version of article.Includes bibliographical references (leaves 81-86).Gold-based heterogeneous catalysts have attracted significant attention due to their selective
partial oxidation capabilities which are comparable to that of the industrial homogeneous
benchmark catalysts. In the current study, a planar Au(111) single crystal model catalyst surface
was utilized to understand the behavior of different organic compounds (alcohols, aldehydes,
esters etc.) in conjunction to the partial oxidation reactions. Stability of different organic
compounds were investigated on the Clean Au(III) surface. The stability of a particular organic
compound on the Au(III) model catalyst surface was found to be closely related to the variety of
generated products. Surface sensitive analytical techniques such as Temperature Programmed
Desorption (TPD) and Low Energy Electron Diffraction (LEED) were used to investigate the
interaction of organic compounds with the clean Au(111) single crystal surfaces under ultrahigh
vacuum (UHV) conditions. Organic compounds were dosed onto atomically clean Au(III)
surfaces at the liquid nitrogen temperature. All organic compounds desorbed non-dissociatively
on the clean Au(111) surface. All organic compounds reveal monolayer and multilayer
desorption signals but in the case of aldehydes, desorption is quite different, as they lead to
polymerization on the surface with high desorption temperatures. Zeroth order desorption
kinetics was observed for multilayers, while 1st order desorption was seen for the monolayer. In
most cases, the multilayer feature can be observed with two distinct desorption peaks
associated with amorphous and crystalline phases. In this work, it is confirmed that majority of
the studied compounds have relatively low adsorption energies on Au(111). The species with
lower desorption energies on Au(111) tend to undergo partial oxidation rather than total
oxidation. Thus, desorption energy appears as an important descriptor for predicting the extent
of oxidation in partial/total oxidation in oxidative coupling reactions.by Shah, Syed Asad Ali
Discovering "unknown known" security requirements
No full textSecurity is one of the biggest challenges facing organisations in the modern hyper-connected world. A number of theoretical security models are available that provide best practice security guidelines and are widely utilised as a basis to identify and operationalise security requirements. Such models often capture high-level security concepts (e.g., whitelisting, secure configurations, wireless access control, data recovery, etc.), strategies for operationalising such concepts through specific security controls, and relationships between the various concepts and controls. The threat landscape, however, evolves leading to new tacit knowledge that is embedded in or across a variety of security incidents. These unknown knowns alter, or at least demand reconsideration of the theoretical security models underpinning security requirements. In this paper, we present an approach to discover such unknown knowns through multi-incident analysis. The approach is based on a novel combination of grounded theory and incident fault trees. We demonstrate the effectiveness of the approach through its application to identify revisions to a theoretical security model widely used in industry.Awais Rashid, Syed Asad Ali Naqvi, Rajiv Ramdhany, Matthew Edwards, Ruzanna Chitchyan, M. Ali Baba
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Dégradation de la résistance résiduelle en traction d’un béton : effet d’un renfort par des fibres et des granulats en caoutchouc : application aux rechargements minces adhérents à base cimentaire
No full textCe travail est centré sur l'étude du décollement de couches minces adhérentes à base cimentaire sur un substrat en béton sous chargement mécanique. Comme matériaux de réparation, des mortiers renforcés par des fibres et/ou incorporant des granulats en caoutchouc sont utilisés. Dans ces conditions, l'étude de la durabilité des réparations implique nécessairement celle de la dégradation de la résistance sous chargement de fatigue. Dans ce contexte, des essais de fatigue par traction, contrôlés par l'ouverture de la fissure (CMOD) sont effectués sur des échantillons composites afin d'établir la loi de dégradation de la résistance du mortier renforcé par des fibres et / incorporant des granulats en caoutchouc. Les résultats montrent que, pour une ouverture de fissure maximale donnée, la résistance résiduelle diminue avec le nombre de cycles et ce quelle que soit la nature du composite. La dégradation maximale de la résistance résiduelle se produit dans le cas du mortier non fibré. Pour des grandes ouvertures de fissure, un renfort par des fibres permet de limiter cette dégradation sous un chargement de fatigue. Dans le cas du mortier incorporant des granulats en caoutchouc, la dégradation de la résistance résiduelle est limitée pour les petites ouvertures de fissure. Une association granulats caoutchouc-renforcement par des fibres permet de limiter les dégâts sur une large étendue d'ouvertures de fissure. Cette solution confère au composite un intérêt pour une application durable dans le cas des réparations minces adhérentes à base cimentaire. En tenant compte des principales pathologies rencontrées dans cette application tels que la fissuration de la couche de réparation suivie par le décollement de l'interface, différentes techniques de préparation de la surface du support ont été évaluées. Parmi celles-ci, un traitement de la surface par sablage, facile à mettre en œuvre dans les conditions réelles, a été utilisé. Pour évaluer la performance structurale, des poutres composites constituées d'un rechargement mince sur des substrats dont la surface a été préalablement traitée par sablage ont été soumises à des essais de flexion trois points (monotone et fatigue). Pour le suivi de l'évolution de la fissuration dans le rechargement et du décollement à l'interface, la technique de corrélation d'image 3D est employée. Il en résulte que l'incorporation des granulats caoutchouc dans le matériau de réparation est efficace pour contrôler la fissuration, et par conséquent pour retarder l'initiation du décollement. De plus, le renforcement du matériau de réparation par des fibres est également efficace pour limiter la propagation du décollement en contrôlant l'ouverture de la fissure. Ainsi, l'utilisation simultanée des granulats caoutchouc et des fibres dans le matériau de réparation par couches minces à base cimentaire peut être une solution appropriée pour retarder l'initiation du décollement et également pour limiter sa propagation, autrement dit pour la durabilité de l'application. Les granulats en caoutchouc utilisés étant obtenus par broyage de pneus usagés non réutilisables, cette approche apporte une valeur ajoutée en valorisant un sous produit industriel et en contribuant à la sauvegarde d'un environnement sain.This work is devoted to the study of the debonding of thin bonded cement-based overlays from the concrete substrate under mechanical loading. As repair materials, fiber-reinforced and rubbberized cement-based mortars are used. Under these conditions, assessment of durability of the repairs necessarily involves the study of the degradation of the bridging strength under fatigue loading. In this context, tensile fatigue tests controlled by crack mouth opening displacement (CMOD) are conducted on composite specimens in order to establish the degradation law of fiber-reinforced and/or rubberized mortar. The bridging strength decreases with the number of fatigue cycles for the same maximum crack width, whatever the nature of the composite. The maximum cyclic bridging strength degradation occurs in plain mortar. The cyclic bridging strength degradation for large pre-cracked widths is limited for mortar reinforced with metallic fibers. In case of rubberized mortar, cyclic bridging strength degradation is limited at less pre-cracked width values. A combine use of rubber aggregates and fibers in mortar appeared to be a suitable solution to limit the cyclic bridging strength degradation for a wide range of pre-cracked widths. It confers to the composite an interest for durable application such as cement-based thin bonded overlays. Taking into account the main cause of distress in thin bonded cement-based applications i.e. cracking and interface debonding, different surface preparation techniques were evaluated in this research. Among them, the sandblasting one is usually implemented in actual conditions. In order to investigate the structural performance, composite beams consisting of a thin repair layer on top of sandblasted substrates are subjected to three point bending tests (monotonic and fatigue). For monitoring the evolution of cracking in the repair layer and of debonding at interface, digital 3D image correlation technique is used. It emerges as a conclusion that the rubber aggregates incorporation in repair material is helpful to control micro-cracking, which results in the delay of the debonding initiation. Moreover, a fiber-reinforcement of repair material is also helpful to limit the interface debonding propagation by restraining opening of the crack. So, the dual-use of rubber aggregates and fibers in the repair material of thin bonded cement-based overlays can be a suitable solution to delay the debonding initiation and also to limit the interface debonding propagation. This shows that the synergetic effect provided by the combine use of rubber aggregates and fibers remains valid under fatigue loading also. The used rubber aggregates are obtained by grinding end-of-life tyres. In such conditions, the approach brings an added value, the recycling of this industrial by-product being also a contribution to the maintenance of a clean environment. Incidentally, this approach also helps towards the development of a circular economy
Book review: Welfare States and Immigrant Rights: The Politics of Inclusion and Exclusion
No full text- …
