1,720,955 research outputs found

    Going Beyond Counting First Authors in Author Co-citation Analysis

    Get PDF
    The present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed

    Використання відходів металургійної та гідрничодобувної промисловості у виробництві в’яжучих речовин

    Get PDF
    The current state of construction science development dictates the use of high–strength binders and concrete based on them during the construction of unique buildings and structures, as well as the construction of complex constructions and their repair.Currently, two main directions in the use of mineral raw materials have been clearly defined. The first direction consists in increasing the degree of use of natural resources at existing and new enterprises. The second is in the creation of zero–waste and low–waste productions associated with technologies aimed at maximum utilization of waste. Thus, multi–tonnage waste of metallurgical enterprises – domain slag – found wide application, first of all, in the building materials industry. The effect of the interaction between sodium silicates and iron compounds and the resulting so–called slag binder, which is a mixture of granulated blast furnace slag with waste from mining and beneficiation plants (iron–containing mineral complex), closed with water, was established.These two provisions served as the basis for obtaining a new type of binder, the so–called alkaline slag slurry, which is a mixture of granulated blast furnace slag with an iron–containing mineral complex. At the same time, iron ore beneficiation waste is used as an iron–containing mineral complex. The specified mixture, when mixed with an aqueous solution of an alkaline component, in the presence of a hydrophobic surface–active substance hardens with the formation of an artificial stone, which has a compressive strength of up to 160 MPa. In a model experiment, the influence of the composition of the composite, which is a mixture of industrial production waste: granulated blast furnace slag and iron ore beneficiation waste, on the strength of the stone obtained as a result of the hardening of this composite when mixing it with an aqueous solution of an alkaline component in the presence of a hydrophobic surfactant was studied.Сучасний стан розвитку будівельної науки зумовлює при будівництві унікальних будівель, споруд, а також зведенні складних будівельних конструкцій та їх ремонті, використання високоміцних в'яжучих речовин та бетонів на їх основі. В даний час чітко визначилися два основні напрямки у використанні мінеральної сировини. Перший напрямок полягає у підвищенні ступеня використання природних ресурсів на існуючих та нових підприємствах. Другий у створенні безвідходних та маловідходних виробництв, пов'язаних із технологіями, спрямованими на максимальну утилізацію відходів. Так багатотоннажні відходи металургійних підприємств – домені шлаки, знайшли широке застосування у першу чергу в промисловості будівельних матеріалів. Встановлений ефект взаємодії між силікатами натрію та сполуками заліза та отримане так зване шлакошламове в'яжуче, що є сумішшю доменного гранульованого шлаку з відходами гірничо–збагачувальних комбінатів (залізовмісним мінеральним комплексом), зачинену водою. Ці два положення послужили основою для отримання нового виду в'яжучого, так званого лужного шлакошламового, яке являє собою суміш доменного гранульованого шлаку з залізовмісним мінеральним комплексом. При цьому, як залізовмісний мінеральний комплекс використовуються відходи збагачення залізних руд. Вказана суміш, при змішуванні з водним розчином лужного компонента, у присутності гідрофобної поверхнево–активної речовини твердне з утворенням штучного каменю, який має міцність при стиску до 160 МПа. У модельному експерименті вивчено вплив складу композиту, що являє собою суміш відходів промислового виробництва: доменного гранульованого шлаку і відходів збагачення залізних руд, на міцність каменю, отриманого в результаті твердіння даного композиту при змішуванні його з водним розчином лужного компонента в присутності гідрофобної поверхнево–активної речовини.&nbsp

    ОСОБЛИВОСТІ РОБОТИ ДРІБНОЗЕРНИСТИХ БЕТОНІВ, ПРИЗНАЧЕНИХ ДЛЯ ГІДРОТЕХНІЧНИХ СПОРУД, ПІД ДІЄЮ НЕГАТИВНИХ І ЗНАКОЗМІННИХ ТЕМПЕРАТУР

    Get PDF
    On the territory of Ukraine there is a significant number of rivers and the sea coast. Hydraulic structures in many cities due to their intensive operation are in poor condition. Repair of such structures is usually very time consuming and expensive. The aim of the work was to study the effect on the properties of fine-grained concrete intended for construction of hydraulic structures of alternating temperatures and to provide the necessary strength and frost resistance of this concrete by changing its structure by using organic and mineral additives in the form of hydrophobic surfactant and iron filler. In the process of performing the experiments were used: binder – Portland cement of the Kryvyi Rih Cement Plant, aggregates – a mixture of Dnieper river sand and waste from the mining and processing plant, as a hydrophobic surfactant – sodium oleate. Under the conditions of the experiment, the introduction of sodium oleate and iron-containing aggregate into the concrete composition reduces the change in the linear dimensions of the samples under the action of alternating temperatures. THE compressive and tensile strength of fine-grained concrete was investigated depending on the initial ratio between the components of the dispersed system "Portland cement – aggregate – water – sodium oleate", the type and content of additives that were introduced, as well as ambient temperature. Under the conditions of the experiment during the hardening of the dispersed system "Portland cement – aggregate – water – sodium oleate" for 28 days under normal conditions of use as an additive of sodium oleate leads to an increase in the strength of concrete, both in compression and tensile strength. It is established that the use of mixed aggregate for the production of fine-grained concrete intended for hydraulic engineering, part of which is obtained by grinding rock -bearing rocks, as well as water structured by colloidal hydrophobic surfactants, increases the resistance of concretes to alternating temperatures.На території України знаходиться значна кількість річок та морське узбереж- жя. На їхніх берегах розташована велика кількість міст. Гідротехнічні споруди в багатьох містах внаслідок їхньої інтенсивної експлуатації перебувають у жалю- гідному стані. Ремонт таких споруд, як правило, дуже трудомісткий і дорогий. Метою роботи було вивчення впливу на властивості дрібнозернистого бетону, призначеного для будівництва гідротехнічних споруд знакозмінних температур і забезпечення необхідної міцності й морозостійкості цього бетону за рахунок зміни його структури шляхом використання органічних і мінеральних добавок у вигляді гідрофобної поверхнево-активної речовини й залізовмісного заповнювача. У про- цесі виконання експериментів застосовувалися: в’яжуче – портландцемент Кри- ворізького цементного заводу, заповнювачі – суміш дніпровського річкового піску та відходів гірничо-збагачувального комбінату, як гідрофобна поверхнево-активна речовина – олеат натрію. В умовах експерименту введення олеату натрію та залі- зовміщуючого заповнювача до складу бетону призводить до зменшення зміни ліній- них розмірів зразків під дією знакозмінних температур. Досліджувалася міцність дрібнозернистого бетону під час стиску й розтягу залежно від вихідного співвідно- шення між компонентами дисперсної системи «портландцемент – заповнювач – вода – олеат натрію», виду й вмісту добавок, які вводилися, а також температури навколишнього середовища. В умовах експерименту під час твердіння дисперсної системи «портландцемент – заповнювач – вода – олеат натрію» протягом 28 діб у нормальних умовах використання як добавки олеату натрію призводить до збіль- шення міцності бетону як під час стиску, так і під час розтягу. Установлено, що застосування для виготовлення дрібнозернистих бетонів, призначених для гідро- технічного будівництва, змішаного заповнювача, частина якого отримана подріб- ненням гірських залізовміщуючих порід, а також води, структурованої колоїдними гідрофобними поверхнево активними речовинами, забезпечує підвищення стійкос- ті бетонів до дії знакозмінних температур

    Variations on the Author

    Get PDF
    “Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship

    Підвищення несучої здатності стиснутих бетонних елементів будівельних конструкцій

    Get PDF
    The article describes the results of determining the influence of ultra-small doses of surface-active substances on the strength of artificial stone obtained from a mixture of nanopowders. the purpose of the work is to determine the effectiveness of the use of surface-active substances in ultra-small doses during the hardening of a mixture of cement nanopowder and calcium carbonate and gypsum nanopowder. The methodology of conducting experiments includes the following methods: analysis of studies on the use of nanopowders and surface-active substances; standard methods of testing building materials; comparative analysis; systematization and generalization of foreign and domestic experience. As a result of the research, the influence of surface-active substances applied in ultra-small doses on the strength of the artificial stone formed as a result of the hardening of nanopowder of calcium carbonate and cement was determined. It has been proven that in this case, the action of ultra-small doses of surface-active substances consists in reducing the number of open pores in the cement stone. Experimental studies have confirmed that molecules of surface-active substances, such as hyperplasticizers or others, significantly change the pH of the water used to make concrete. Increasing the mechanical strength of the obtained artificial stone allows replacing part of the cement nanopowder with a cheaper mineral nanopowder. It was established that an increase in the water-cement ratio in the mixture of nanopowders leads to an increase in the effectiveness of ultra-small doses of surface-active substances in the formation of compressive strength. The highlighted scientific materials became the starting point for understanding the researched issue. The effect of ultra-small doses of surface-active substances on the strength of artificial stone obtained from a mixture of nanopowders was identified and substantiated. The results of the research can be used in the production of concrete and reinforced concrete products and structures.У статті описано результати визначення впливу надмалих доз поверхнево-активних речовин на міцність штучного каменю, отриманого на суміші нанопорошків. метою роботи є визначення ефективність застосування поверхнево-активних речовин у надмалих дозах при твердінні суміші нанопорошку цементу та нанопорошку карбонату кальцію та гіпсу. Методика проведення експериментів включає в себе наступні методи: аналіз досліджень застосування нанопорошків та поверхнево-активних речовин; стандартні методи випробувань будівельних матеріалів; порівняльний аналіз; систематизація і узагальнення закордонного та вітчизняного досвіду. У результаті проведеного дослідження було визначено вплив поверхнево-активних речовин, застосованих у надмалих дозах на міцність штучного каменю, утвореного в наслідок твердіння нанопорошку карбонату кальцію та цементу. Доведено, що в цьому випадку дія надмалих доз поверхнево-активних речовин полягає у зменшенні кількості відкритих пор у цементному камені. Експериментальні дослідження підтвердили, що молекули поверхнево-активних речовин, таких як гіперпластифікатори або інші значно змінюють рН води, що використовується для виготовлення бетону. Підвищення механічної міцності отриманого штучного каменю дозволяє замінити частину нанопорошку цементу нанопорошком з більш дешевого мінералу. Встановлено, що збільшення водоцементного відношення у суміші нанопорошків призводить до підвищення ефективності надмалих доз поверхнево-активних речовин у формуванні міцності на стиск. Висвітлені наукові матеріали стали відправною точкою для осмислення досліджуваного питання. Виявлено та обґрунтовано вплив надмалих доз поверхнево-активних речовин на міцність штучного каменю, отриманого на суміші нанопорошків. Результати дослідження можуть бути використані при виробництві бетонних та залізобетонних виробів та конструкцій

    Appropriate Similarity Measures for Author Cocitation Analysis

    Get PDF
    We provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis

    Dispelling the Myths Behind First-author Citation Counts

    Get PDF
    We conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more sophisticated methods

    Author Index

    No full text
    Nao informado

    koamabayili/VECTRON-author-checklist: VECTRON author checklist

    No full text
    We have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
    corecore