1,721,672 research outputs found
Design and fabrication of automatic fishing rod snatcher / Muhammad Hakim Rasdi and Nur Kamarliah Kamardin
Full text linkThis project illustrates the design and fabrication of an existing automatic fishing rod holder. This project is designed to help people who fish frequently as a hobby. Fishing for prolonged hours often presents a few problems; due to the inability to continue keeping an eye on the bait, the consumer risks getting caught off guard, and losing catch. Other than that, the consumer will sometimes not realise if a fish has eaten the bait. In this project, this product will help them to dissolve those issues. The typical automatic fishing rods sold in the market are likely fishing rod holders that contain a spring to pull up the fishing rod if the fish ate the bait. The improvement for this project is the fishing rod snatchers not only pull up the fishing rod but at the same time have LED lights for alerting the user if there are motions on their fishing rod. The material for this product is stainless steel due to its durable and high tensile strength. A spring mechanism was used to pull up the force from the fish. It is concluded that using an automated fishing rod snatcher helps the user to reduce the losing fish and realise the movement of the bait due to spring and LED mechanis
Beach / Nurul Nadiah Rasdi
Full text linkAnthology of 203 poems which were contributed by 156 lecturers and academicians from UiTM and other higher learning institutions. This is in fact the largest collection of poems compiled in one anthology
Sawn hardwood lumber grading / Noor Rosida Rasdi
Full text linkGrading are systems of classification used to separate lumber into classes on the basis of the number, size and character of such physical features such as knots, splits, check, wormholes, wane, pitch streaks and pockets. Grading should follow the steps to determine the standard rules for the sawn hardwood. Every country has different steps and standard for the grading
Determinants of economic growth in Malaysia / Nurrasmah Rasdi
Full text linkThe study will discuss about background of the study that been carried out of this research by exploring the factors of economic growth in Malaysia. Graphically analysis also carried out in order to see the evolution of the variable using time series data. From background of the study, will be highlighted several issue to construct the problem statement. After formulating problem statement, the research objectives will be laid down and scope and limitation will be testing on
Teks ucapan perasmian Majlis Penghargaan Muzakki 2024 dan Perasmian Etiqa PPZ-AZKA corner sempena Program Bicara Berkat: wakaf dan zakat,membawa berkat
Full text linkPTAR UiTM Cawangan Melaka Kampus Alor Gajah dengan kerjasama Unit Waqaf, Zakat dan Infaq (EL-WAZIF), UiTM Cawangan Melaka telah menganjurkan Majlis Penghargaan Muzakki dan Perasmian Etiqa AZKA-PPZ Corner di Ruang Library Community Engagement (LCE), PTAR UiTM Cawangan Melaka, Kampus Alor Gajah. Tujuan majlis ini diadakan bagi menghargai sumbangan yang di salurkan oleh pihak Etiqa Takaful, Akademi Zakat (AZKA-PPZ), Lembaga Tabung Haji dan Persatuan Alumni UiTM Cawangan Melaka kepada UiTM Cawangan Melaka, khususnya sumbangan kepada pelajar-pelajar asnaf serta sumbangan dari Etiqa AZKA-PPZ Corner di PTAR UiTM Cawangan Melaka, Kampus Alor Gajah. Majlis yang telah dirasmikan oleh YBhg. Profesor Ts. Dr Mohd Rasdi Zaini, Rektor UiTM Cawangan Melak
Impact of Anterior Load Carriage on Muscle Fatigue, Gait Kinematics and Pelvis-Trunk Coordination
No full textBackground: Carrying is one of the most frequently performed activities of daily living, particularly in industrial settings. However, as the carrying activity involves a direct exposure to several biomechanical mechanisms that can potentially affect the musculoskeletal function of the lower back, a prolonged use of the activity may lead to low back pain (LBP). Therefore, the aim of this doctoral study was to investigate the impact of anterior load carriage on muscle fatigue, spatiotemporal parameters and 3D kinematics of gait, and pelvis-trunk coordination. Methods: This cross-sectional study involved 37 healthy people; 20 sedentary individuals and 17 manual workers. All participants were instructed to perform an isometric back endurance test and two gait conditions: 1) standard gait and 2) carrying gait whilst carrying a safe-maximum load (max-kg gait). The spatiotemporal parameters and 3D kinematics of gait, as well as the pelvis-trunk coordination during the activity were measured using the Vicon Motion Analysis System. The muscle fatigue during the activity was measured based on the slope of median frequency (MFslope) of surface electromyography (EMG). The differences between the sedentary and the manual groups in all parameters were examined. Results: During the Ito test, there was no significant difference in the isometric back endurance and muscle fatigue between the groups. During the carrying activity, the manual group was able to carry 4 kg heavier maximum load compared to the sedentary group. For the gait parameters, there was a significant effect of load condition (standard gait to max-kg gait) on cadence (increased by 10 steps/minute), stride length (reduced by 4 cm) and stride time (reduced by 0.09 seconds). For the gait kinematics, there was a significant effect of load condition during stance phase on the range of motion (ROM) of ankle (flexion-extension), left hip (flexion-extension, with significant interaction effect), pelvic tilt, left pelvic axial rotation and all trunk movements. For the pelvis-trunk coordination, there was a significant increase in the percentage of in-phase coordination across the activity in flexion-extension (11% increase in the manual group only), lateral flexion (10% increase in the manual group, 5% increase in the sedentary group but on the right side only) and axial rotation (23% increase on the right side only). Conclusion: The results suggested that both manual and sedentary groups demonstrated a similar pattern of changes in spatiotemporal parameters regardless of their maximum carrying load. However, the differences in gait kinematics and pelvis-trunk coordination between the groups may indicate common body strategies to adapt with a safe-maximum load limit. Therefore, this study had established a biomechanical baseline of anterior load carriage among healthy population that can be used to guide further research investigation on specific group of people or patients as a part of functional capacity evaluation
EVALUASI KINERJA TENAGA KERJA BAGIAN SORTASI BIJI PINANG (Areca catechu, L.) CV. RASDI & CO BERDASARKAN FAKTOR-FAKTOR YANG BERPENGARUH
Full text linkEvaluasi faktor-faktor yang berpengaruh terhadap produktivitas tenaga kerja akan menghasilkan rekomendasi dalam pengembangan sumber daya manusia bagi perusahaan. Tujuan dari penelitian ini adalah mengetahui pengaruh motivasi, lingkungan kerja, gaji, beban kerja dan usia terhadap tenaga kerja bagian sortasi biji pinang CV. Rasdi & Co serta menghasilkan rekomendasi untuk peningkatan kinerja tenaga kerja berdasarkan faktor-faktor yang berpengaruh terhadap tenaga kerja bagian sortasi biji pinang CV. Rasdi & Co. Metode yang digunakan dalam penelitian ini adalah metode survei. Pengolahan data menggunakan analisis regresi linear berganda.
Hasil penelitian menunjukkan bahwa motivasi, lingkungan kerja, gaji, beban kerja dan usia memberikan pengaruh terhadap tenaga kerja sortasi CV. Rasdi & Co. Persamaan regresi yang diperoleh adalah Y = -4,640 + 0,210 X1 + 0,089 X2 + 0,080 X3 - 0,070 X4 + 0,813 X5. Dari persamaan regresi linear tersebut dapat diketahui bahwa nilai koefisien variabel usia lebih besar dari nilai koefisien variabel bebas lainnya. Nilai koefisien variabel usia sebesar 0,813. Setelah dilakukan evaluasi terhadap kinerja tenaga sortasi didapatkan 5 rekomendasi untuk peningkatan kinerja.
Kata kunci: Sortasi, Regresi Linear Berganda, Rekomendas
Industrial training report: Ipoh City Council / Mohammad Rafiq Effny Rasdi
Full text linkThe trainee has undergoes to Ipoh City Council to gain knowledge and fulfill trainee faculty requirement to complete the industrial training from 1st August 2018 until 31th December 2018. The trainee has been placed in SPBT and General Unit for 5 months' internship. That is why, the report for industrial training was creates as an evidence for the trainee since had undergoing to this organization. In this report the trainee was divided the contents into 4 chapters which are introduction, organization information, training activities and the last one is conclusion. In chapter 1, the trainee was covers about the organization background, mission, vision, objectives, functions and organizational chart. For chapter 2, the trainee includes information about the SP BT and General unit, mission, vision and their functions. Next, chapter 3 the trainee was share about her activities during her internship including daily activities, other activities and his special project. For the last chapter, the trainee was writes about the application of knowledge, his personal thought, limitations and recommendation/or organization and unit itself
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
- …
