1,720,960 research outputs found
Evaluation of X-ray Camera As a Tool for Automated Beam Characterization
No full textSeveral methods for analysing materials and proteins use highly concentrated beams of X-rays, e.g. SAXS and X-ray crystallography. To evaluate the outgoing beam, it is of high importance to know the light distribution of the incoming beam. Previously, a method for this has been to focus the X-ray beam onto a pinhole in front of a photodiode, a so called pinhole measurement. Although this method gives information about the radial distribution of the beam, it is very time-consuming. In this report a faster alternative has been developed and evaluated. In this new method an image is taken with an X-ray camera in the focus of the beam. Algorithms are then used to replicate a pinhole measurement by applying virtual pinholes. Different pixels in an image act differently, referred to as spatial noise. This must be compensated for before information about the beam may be extracted. To do this, the camera noise was characterized and a calibration procedure developed for its minimization. It was shown that the spatial noise was greatly reduced, making the temporal shot noise the new largest noise source. Although the noise was successfully reduced, the calibration procedure failed to accurately remove all signal not originating from registered photons. Measurements done with low photon intensities, large exposure times or at high temperatures are therefore less accurate. The measured camera signal was transformed into incident photon intensity using a responsivity proportionality constant. This constant was estimated by comparing the results from real and virtual pinhole measurements for several photon intensities and pinholes. The results gave a responsivity proportionality constant of 0,03 DN/X-ph. Further measurements were done concerning the temperature dependence of the camera responsivity and to investigate possible bleaching. The results indicated that the responsivity was held constant under changing temperatures and that the camera remained unbleached during the 114h long measurement. Finally, real and virtual pinhole measurements were done for a series of pinholes and compared using the responsivity proportionality constant. A maximum relative deviation of 6% was measured between the two, indicating that virtual pinhole measurements give accurate results. The largest deviations of the measurement seem to occur when using small or large pinholes. These errors, however, have a high potential of being further minimized, resulting in higher accuracy
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Damage shielding mechanisms in hierarchical composites in nature with potential for design of tougher structural materials
No full textLoad-carrying materials in nature, such as wood and bone, consist of relatively simple building blocks assembled into a hierarchical structure, ranging from the molecular scale up to the macroscopic level. This results in composites with a combination of high strength and high toughness, showing very large fracture surfaces indicating energy dissipation by cracking on multiple length scales. Man-made composites instead consist typically of fibres embedded in a uniform matrix, and frequently show brittle failure through the growth of critical clusters of broken fibres. In this paper, a hierarchical structure inspired by wood is presented. It is designed to incapacitate cluster growth, with the aim of retaining high strength. This is done by introducing new structural levels of successively weaker interfaces with the purpose of reducing the stress concentrations if large clusters appear. To test this hypothesis, a probability density field of further damage growth has been calculated for different microstructures and initial crack sizes. The results indicate that the hierarchical structure should maintain its strength by localization of damage, yet rendering large clusters less harmful by weakening the resulting stress concentration to its surroundings, which would lead to an increase in strain to failure. In this context, the potential of using the biomimetic hierarchical structure in design of composite materials is discussed
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
Data from: Damage shielding mechanisms in hierarchical composites in nature with potentials in design of tougher structural materials
No full textLoad-carrying materials in nature, such as wood and bone, consist of relatively simple building blocks assembled into a hierarchical structure, ranging from the molecular scale up to the macroscopic level. This results in composites with a combination of high strength and high toughness, showing very large fracture surfaces indicating energy dissipation by cracking on multiple length scales. Manmade composites instead consists typically of fibres embedded in a uniform matrix, and frequently shows brittle failure through the growth of critical clusters of broken fibres. In this paper, a hierarchical structure inspired by wood is presented. It is designed to incapacitate cluster growth, with the aim of retaining high strength. This is done by introducing new structural levels of successively weaker interfaces with the purpose to reduce the stress concentrations if large clusters would appear. To test this hypothesis, a probability density field of further damage growth has been calculated for different microstructures and initial crack sizes. The results indicate that the hierarchical structure should maintain its strength by localisation of damage, yet rendering large clusters less harmful by weakening the resulting stress concentration to its surroundings, which would lead to an increase in strain to failure. In this context, the potential of utilising the biomimetic hierarchical structure in design of composite materials is discussed
- …
