162,635 research outputs found
Reuse of glass bottles for structural columns
No full textContainer glass is omnipresent and reuse can be observed all around the world. It can even be reused for the construction of structural components for buildings of which several examples exist around the world. However, research on the reuse of glass for structural components seems lacking. Therefore, this paper investigates the potential of reusing glass bottles for the construction of structural columns. Firstly, the compression strength of artificially abraded glass bottles was investigated in compression tests, revealing a compression strength between 10 and 20 kN. Secondly, alternative assemblies of multiple glass bottles were tested in compression, to determine their suitability for constructing a column. Finally, an exemplary column prototype constructed of glass bottles is presented. From the findings it is concluded that it is feasible to reuse glass bottles for the construction of structural columns that could carry small scale structures.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Applied Mechanic
Regeneration Of Thermally Recycled Glass Fibre For Cost-Effective Composite Recycling : Overview of the ReCoVeR projects
No full textGlobal production of composite materials in 2015 will significantly exceed 10 million tons. Glass fibre reinforced composites account for more than 90% of all the fibre-reinforced composites currently produced. Development of economically viable processes for recycling end-of-life glass fibre composites would have major economic and environmental impacts. This presentation introduces the ReCoVeR projects on enabling cost-effective performance regeneration of glass-fibres from thermal recycling of end-of-life automotive and wind energy composites. ReCoVeR technology targets treating glass fibre thermally reclaimed from GRP waste in order to regenerate a performance level which is equivalent to new fibres. Composite materials reinforced with ReCoVeR glass fibres can currently attain over 80% of the reinforcement performance of composites produced with pristine glass fibres
Thermal, optical and mechanical properties of new glass compositions containing fly ash
No full textThe investigation of new compositions is crucial for the expansion of possible applications of glass, from the typical applications for building engineering, in the form of cast blocks or float glass, to more advanced technologies, such as 3D-printed glass or glass-to-metal connections. Since high melting temperatures and brittleness are two important drawbacks of glass, this work aims to improve both properties. Characterisation techniques, such as thermal analysis, nano-indentation, and UV/VIS spectroscopy, are used to evaluate the properties of the samples. The modification of the properties is achieved via changes in the composition of the glass, using compounds such as phosphorus pentoxide, aluminium oxide and boron oxide. Then, the choice of different glass formers and modifiers contributes to the development of compositions with lower melting and glass transition temperatures. The reduction of the melting temperature allows a saving of energy during the manufacturing. The structures of the glasses differ from the standard soda–lime–silica and borosilicate glasses, leading to a different mechanical behaviour. Furthermore, these new compositions incorporate up to 35% of fly ash in their formulas. The valorisation of these by-products reduces costs and gas emission.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Materials and EnvironmentStructural Design & MechanicsApplied Mechanic
Changes in glass consumption in Pergamon (Turkey) from Hellenistic to late Byzantine and Islamic times
No full textWe present compositional data for nearly 100 glass samples from Pergamon, western Turkey, spanning 1500 years from the Hellenistic to Late Byzantine and Islamic periods. The data shows the use of already-known Roman glass groups during the first half of the time frame, for imported vessels as well as locally worked glass. No compositional change is seen related to the introduction of glass blowing for either of the glass groups in use during this time. During the first half of the 1st millennium AD, two previously little-known boron- and alumina-rich compositional groups emerge. These glass groups, thought to be regionally produced, dominate glass compositions in Pergamon during the mid-to late Byzantine and Islamic periods, indicating a major shift in glass supply and a fragmentation of the economy into more regional units. Plant-ash glass, from the 9th century AD replacing mineral natron glass in the Levant, plays only a minor role in Byzantine and Islamic Pergamon
Micromachined glass apertures for artificial lipid bilayer formation in a microfluidic system
No full textThe use of spark assisted chemical engraving (SACE) to produce glass apertures that are suitable for the formation of artificial bilayer lipid membranes is described. Prior to use, the glass apertures were rendered hydrophobic by a silanization process and were then incorporated into a simple microfluidic device. Successful bilayer lipid membrane (BLM) formation and the subsequent acquisition of single-channel recordings are demonstrated. Due to the simplicity and rapidity of the SACE process, these glass apertures could be easily integrated into an all-glass microfluidic system for BLM formation
Extruded small-core bismuth oxide glass holey fibres
No full textWe report our progress on the fabrication and characterisation of highly nonlinear bismuth oxide glass holey fibres. The measured losses for these fibres were ~3 dB/m at 1.55 µm, and the effective nonlinearity of the smallest core fibre was as high as 1100 W at the same wavelength
On the Evaluation of the Mechanical Behaviour of Structural Glass Elements
No full textGlass can be considered to be a high-technology engineering material with a
multifunctional potential for structural applications. However, the conventional approach to the use
of glass is often based only on its properties of transparency and isolation. It is thus highly
appropriate and necessary to study the mechanical behaviour of this material and to develop
adequate methods and models leading to its characterisation. It is evident that the great potential of
growth for structural glass applications is an important opportunity of development for the glass
industry and the building/construction sectors. The work presented in this paper is a reflection of
this conclusion. The authors shortly present the state-of-the-art on the application of glass as a
structural element in building and construction, and refer to other potential fields of application and
available glass materials. The experimental procedures and methods adopted in three-point bending
tests performed on 500 × 100 [mm2] float, laminated and tempered glass specimens with
thicknesses between 4 and 19 mm are thoroughly described. The authors evaluated the mechanical
strength and stiffness of glass for structural applications. This work contributes to a deeper
knowledge of the properties of this material
Multiple Glass Ceilings
No full textBoth vertical (between job levels) and horizontal (within job levels) mobility can be sources of wage growth. We find that the glass ceiling operates at both margins. The unexplained part of the wage gap grows across job levels (glass ceiling at the vertical margin) and across the deciles of the intra-job-level wage distribution (glass ceiling at the horizontal margin). This implies that women face many glass ceilings, one for each job level above the second, and that the glass ceiling is a pervasive phenomenon. In the Netherlands it affects about 88% of jobs, and 81% of Dutch women in employment work in job levels where a glass ceiling is present.glass ceiling, wage gap, gender
Challenging glass
No full textEditorialGreen Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Structural Design & MechanicsApplied Mechanic
Glass engineering!
No full textEditorialGreen Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Structural Design & Mechanic
- …
