265 research outputs found
How do governments actually use environmental taxes?
This paper empirically examines how governments actually use environmental taxes, by looking to what extent their resort to this type of taxation is consistent with three alternative interpretations of environmental taxes proposed by the welfare economics theoretical literature: the strict and the broad Pigouvian and the double dividend hypotheses. We also extend our analysis to an alternative vision of politics, the Leviathan model, to verify how governments that are imperfectly accountable use environmental taxes. Each theory leads to alternative testable hypotheses, which we verify on a sample that minimizes the analysts’ discretionary evaluations, the EU-28 countries that committed themselves to reducing the greenhouse gas emissions by 2020. The estimates lend support to the strict Pigouvian hypothesis and, to a lesser extent, to a version of the double dividend hypothesis, where personal income taxes are ‘recycled’ by environmental ones. The other interpretations do not appear consistent with the data
Environmental taxation: Pigouvian or Leviathan?
International audienceThis paper empirically examines which type of fiscal levies are environmental taxes, by analyzing how governments actually use them. The theoretical literature is polarized between two alternative interpretations of environmental taxes: the Pigouvian and the Leviathan hypotheses, each leading to alternative testable hypotheses. We test them on a sample where the analysts’ discretionary evaluations are minimal, the EU-28 countries that committed themselves to correcting a negative environmental externality, the greenhouse gas emissions, by 2020. The estimates lend support to the strict Pigouvian hypothesis, while the Leviathan hypothesis appears less consistent with the data
Invariants l-adiques, p-adiques et géométriques en familles de variétés
This thesis is divided in 8 chapters. Chapter 1 is of preliminary nature: we recall the tools that we will use in the rest of the thesis and some previously known results. Chapter 2 is devoted to summarize in a uniform way the new results obtained in this thesis. The other six chapters are original. In Chapters 3 and 4, we prove the following: given a smooth proper morphism f:Y→X over a smooth geometrically connected base X over an infinite finitely generated field of positive characteristic, there are lots of closed points x∈|X| such that the rank of the N'eron-Severi group of the geometric fibre of f at x is the same of the rank of the N'eron-Severi group of the geometric generic fibre. To prove this, we first study the specialization of the ℓ-adic lisse sheaf R²f_*ℚℓ(1)(ℓ≠p), then we relate it with the specialization of the F-isocrystal R²f_{*,crys}O_{Y/K}(1) passing trough the category of overconvergent F-isocrystals. Then, the variational Tate conjecture in crystalline cohomology, allows us to deduce the result on the N'eron-Severi groups from the results on R²f_{*,crys}O_{Y/K}(1). These extend to positive characteristic results of Cadoret-Tamagawa and Andr'e in characteristic zero. Chapters 5 and 6 are devoted to the study of the monodromy groups of (over)convergent F-isocrystals. Chapter ref{chaptermarcuzzo} is a joint work with Marco D'Addezio. We study the maximal tori in the monodromy groups of (over)convergent F-isocrystals and using them we prove a special case of a conjecture of Kedlaya on homomorphism of convergent F-isocrystals. Using this special case, we prove that if A is an abelian variety without isotrivial geometric isogeny factors over a function field F over F¯_p, then the group A(F^{perf})_{tors} is finite. This may be regarded as an extension of the Lang--N'eron theorem and answer positively to a question of Esnault. In Chapter 6, we define overline Q_p-linear category of (over)convergent F-isocrystals and the monodromy groups of their objects. Using the theory of companion for overconvergent F-isocrystals and lisse sheaves, we study the specialization theory of these monodromy groups, transferring the result of Chapter 3 to this setting via the theory of companions. The last two chapters are devoted to complements and refinement of the results in the previous chapters. In Chapter 7, we show that the Tate conjecture for divisors over finitely generated fields of characteristic p above 0 follows from the Tate conjecture for divisors over finite fields of characteristic p above 0. In Chapter 8, we prove uniform boundedness results for the Brauer groups of forms of varieties in positive characteristic, satisfying the ℓ-adic Tate conjecture for divisors. This extends to positive characteristic a result of Orr-Skorobogatov in characteristic zero.Cette thèse est divisée en huit chapitres. D’abord, dans le Chapitre 1, on présente des résultats et des outils déjà connus qu’on utilisera dans la suite de la thèse. Le Chapitre 2 est consacré à résumer de maniére uniforme les nouveaux résultats présentés dans ce manuscrit. Les six chapitre restants sont originals. Dans les Chapitres 3 et 4 on démontre la chose suivante: soit f:Y→X un morphisme lisse et prope sur une base X lisse et géométriquament connexe sur un corps infini, finiment engendré et de caractéristique positive. Alors il y a beaucoup de points fermées x∈|X| tels que le rang du groupe de Néron-Severi de la fibre géometrique de f en x est le même du groupe de Néron-Severi de la fibre géométrique générique. On preuve ça de la façon suivante: on étudie la spécialisation du faisceau lisse ℓ-adique R²f_*ℚℓ(1)(ℓ≠p); en suite, on le relit avec la spécialisation du F-isocristal R²f_{*,crys}O_{Y/K}(1) en passant par la catégorie des F-isocristaux surconvergents. Au final, la conjecture de Tate varationelle dans la cohomologie cristalline, nous permet de déduire le résultat sur les groupes de Néron-Severi depuis le résultat sur R²f_{*,crys}O_{Y/K}(1). Cela étend en caractéristique positive les résultats de Cadoret-Tamagawa et André en caractéristique zero. Les Chapitres 5 et 6 sont consacrés à l’étude des groupes de monodromie des F-isocristaux (sur)convergents. En particulier, les résultats dans le Chapitre 5 sont un travail en common avec Marco D'Addezio. On étude les tores maximaux des groupes de monodromie des F-isocristaux (sur)convergents et on utilise ça pour démontrer un cas particulier d’un conjecture de Kedlaya sur les homomorphismes de F-isocristeaux convergents. En utilisant ce cas particulier, on démontre que si A est une variété abélienne sans facteurs d'isogonie isotrivial sur un corps de fonctions F sur F¯_p, alors le groupe A(F^{perf})_{tors} est fini. Cela peut être considéré comme une extension du théoreme de Lang—Néron et donne une réponse positive a une question d'Esnault. Dans le Chapitre 6, on définit une catégorie overline Q_p-linéaire des F-isocristeaux surconvergents et les groupes de monodromie de ces objets. En exploitant la théorie des compagnons pour les F-isocristeaux surconvergents et les faisceaux lisses, on étudie la théorie de spécialisation de ces groupes de monodromie en transférant les résultats du Chapitre 3 dans ce contexte. Les derniers deux chapitres complètent et affinent les résultats des chapitres précédents. Dans le Chapitre 7, on démontre que la conjecture de Tate pour les diviseurs sur les corps finiment engendrés et de caractéristique p supérieur à 0 est une conséquence de la conjecture de Tate pour les diviseurs sur les corps finis de caractéristique p supérieur à 0. Dans le Chapitre 8, on démontre des résultats de borne uniforme en caractéristique positive pour le groupes de Brauer des formes des variétés qui satisfasse la conjecture de Tate ℓ-adique pour les diviseurs. Cela étend en caractéristique positive un résultat de Orr-Skorobogatov en caractéristique zéro
Multifluid eulerian modelling of a silicon fluidized bed chemical vapor deposition process : analysis of various kinetic models
Using the multifluid Eulerian code MFIX, the silicon Fluidized Bed Chemical Vapor Deposition process from silane (SiH4) has been modelled under transient conditions. In order to constitute an experimental database, a preliminary experimental study has been performed using a bed of Geldart’s group B particles. After a detailed analysis and comparison of the kinetic models available in the literature, four of them have been implemented in the MFIX code and two hydrodynamic models have been tested. 3-D simulations have shown that a strong interaction exists between the bed hydrodynamics, heat and reactive mass transfers and that Si deposition from silane mainly occurs in the dense zones of the bed whereas the unsaturated species silylene (SiH2) forms in bubbles and slugs and leads to Si deposition mainly at their periphery; its contribution to deposition can be locally as high as that of SiH4. The average contribution of SiH2 to deposition increases with the inlet concentration of silane and can reach 30%. The kinetic models derived from the law of Furusawa et al. and from the data compiled by Buss et al. and the hydrodynamic model based on the true granular energy equation and the Princeton solid phase stress model have revealed to be the most appropriate ones for the conditions tested
How do governments actually use environmental taxes?
This paper empirically examines how governments actually use environmental taxes, by looking to
what extent their resort to this type of taxation is consistent with three alternative interpretations
of environmental taxes proposed by the welfare economics theoretical literature: the strict and the
broad Pigouvian and the double dividend hypotheses. We also extend our analysis to an alternative
vision of politics, the Leviathan model, to verify how governments that are imperfectly
accountable use environmental taxes. Each theory leads to alternative testable hypotheses, which
we verify on a sample that minimizes the analysts’ discretionary evaluations, the EU-28 countries
that committed themselves to reducing the greenhouse gas emissions by 2020. The estimates lend
support to the strict Pigouvian hypothesis and, to a lesser extent, to a version of the double
dividend hypothesis, where personal income taxes are ‘recycled’ by environmental ones. The other
interpretations do not appear consistent with the data
Development of a cold-atom hybrid inertial measurement unit
Le travail de thèse présenté dans ce manuscrit porte sur le développement expérimental d'une centrale inertielle hybride à atomes froids. Un tel instrument permettrait d'améliorer les performances des centrales inertielles embarquées aujourd'hui, composées de capteurs inertiels classiques souffrant d'une dérive de biais induisant une erreur de positionnement après quelques heures de navigation. Les objectifs de cette thèse sont d'adresser deux points bloquants qui empêchent aujourd'hui de construire une centrale inertielle atomique embarquable : la mesure d'accélération horizontale par interférométrie atomique, et la plage de fonctionnement faible en rotation des capteurs atomiques. Pour cela, nous utilisons un dispositif expérimental de laboratoire qui génère un nuage d'atomes froids de 87Rb, afin d'effectuer des séquences d'interférométrie atomique avec des transitions Raman stimulées. Les faisceaux Raman sont rétro-réfléchis par un miroir sur lequel est fixé un accéléromètre classique destiné à être hybridé avec le capteur atomique. Pour s'affranchir du problème de dégénérescence des transitions Raman +- k_eff en régime de faible vitesse, nous avons développé deux méthodes de mesure de l'accélération horizontale par interférométrie atomique. La première méthode consiste à appliquer une rampe de fréquence sur les faisceaux Raman horizontaux, pour retrouver l'analogue d'un effet Doppler dans la direction de mesure horizontale. Grâce à cette méthode, nous avons construit un capteur atomique de type Mach-Zehnder, hybridé avec un accéléromètre classique, dont la sensibilité court terme vaut 3.2 x 10^−5 m.s−2/racine{Hz}. La seconde technique repose sur une transition Raman entre les états hyperfins |F=1,m_F= -+ 1> et |F=2,m_F= +- 1> avec des faisceaux Raman polarisés sigma+ - sigma-. Grâce aux règles de sélection en polarisation, cette configuration n'autorise qu'une seule transition contra-propageante, malgré l'absence d'effet Doppler. En implémentant cette méthode, nous avons construit un capteur hybridé ayant une sensibilité court terme de 22 x10 ^-5 m.s^-2/racine{Hz}. Les effets systématiques associés à chacune des deux méthodes ont été étudiés théoriquement et expérimentalement. Le dernier chapitre, de nature théorique, présente une nouvelle méthode interférométrique permettant d'étendre la plage de fonctionnement en rotation des capteurs inertiels atomiques. Il est jusqu'à ce jour tenu au secret par la Direction Générale de l'Armement.The thesis work presented in this manuscript is about the experimental development of a hybrid cold atom inertial unit. Such an instrument would improve the performances of embeddable inertial measurement units, composed of classical inertial sensors suffering from a bias drift leading to positioning errors after a few hours of navigation. The goals of this thesis are to address two blocking points that prevent today the construction of an embedded atom inertial measurement unit: the horizontal acceleration measurement by atom interferometry, and the limited dynamic range of atomic sensors in terms of rotations. To do so, we work on a laboratory experiment that generates a cloud of cold 87Rb atoms, in order to perform atom interferometry sequences with stimulated Raman transitions. The Raman beams are retroreflected off a mirror on which a classical accelerometer is fixed, in order to be hybridized with the atomic sensor. To solve the degeneracy issue of +- k_eff Raman transitions in the low velocity regime, we have developed two methods to measure the horizontal acceleration with an atom interferometer. The first method consists in applying a fast frequency chirp on the horizontal Raman lasers to simulate an equivalent Doppler shift in the horizontal measurement direction. With this method we have built a Mach-Zehnder type atomic sensor, hybridized with a classical accelerometer, with a short term sensitivity of 3.2 x 10^-5 m.s^-2/racine{Hz}. The second technique is based on Raman transitions between the hyperfine states |F=1,m_F= -+ 1> and|F=2,m_F= +- 1> with sigma+ - sigma- polarized Raman beams. Thanks to the polarization selection rules, this configuration allows only one counter-propagating transition, despite the absence of a Doppler effect. By implementing this method, we have built a hybridized sensor with a short term sensitivity of 22 x 10 ^-5 m.s^-2/racine{Hz}. The systematic effects associated with each one of the methods have been studied theoretically and experimentally. The last chapter presents a new interferometric method to extend the dynamic range of operation of atomic inertial sensors in the presence of rotations. It is until now kept secret by the Direction Générale de l'Armement
Interférométrie atomique utilisant des transitions Raman σ + − σ − entre les niveaux | F = 1 , m F = ∓ 1 〉 and | F = 2 , m F = ± 1 〉
International audienceWe report on the experimental demonstration of a horizontal accelerometer based on atom interferometry using counterpropagative Raman transitions between the states |F = 1, mF = ∓1 and |F = 2, mF = ±1 of 87 Rb. Compared to the |F = 1, mF = 0 ↔ |F = 2, mF = 0 transition usually used in atom interferometry, our scheme presents the advantages to have only a single counterpropagating transition allowed in a retroreflected geometry, to use the same polarization configuration as the magneto-optical trap and to allow the control of the atom trajectory with magnetic forces. We demonstrate horizontal acceleration measurement in a close-to-zero velocity regime using a singlediffraction Raman process with a short-term sensitivity of 25 × 10 −5 m.s −2 .Hz −1/2 and resolution down to 3.8 × 10 −6 m.s −2 at an integration time of 3300 s. We discuss specific features of the technique such as spontaneous emission, light-shifts and effects of magnetic field inhomogeneities. We finally give possible applications of this technique in metrology or for cold-atom inertial sensors dedicated to onboard applications.Nous présentons la démonstration expérimentale d'un accéléromètre horizontal basé sur l'interférométrie atomique utilisant des transitions Raman contrapropageantes entre les états F = 1,mF = -+1 et F = 2,mF = +-1 du Rb87. Comparé à la transition F = 1,mF = 0 - F = 2,mF = 0 habituellement utilisée en interférométrie atomique, notre schéma présente les avantages d'avoir une seule transition contrepropageante permise dans une géométrie rétroréfléchie, d'utiliser la même configuration de polarisation que le piège magnéto-optique et de permettre le contrôle de la trajectoire de l'atome avec des forces magnétiques. Nous démontrons une mesure de l'accélération horizontale dans un régime de faible vitesse en utilisant de la simple diffraction Raman avec une sensibilité à court terme de 25 x 10-5 m.s-2.Hz-1/2. Nous discutons des caractéristiques spécifiques de la technique telles que l'émission spontanée, les décalages lumineux et les effets des inhomogénéités du champ magnétique. Nous donnons enfin les applications possibles de cette technique en métrologie ou pour les capteurs inertiels à atomes froids dédiés aux applications embarquées
On the profinite regular inverse Galois Problem
Given a field k, a k-curve X and a k-rational divisor t ⊂ X, we analyze the constraints imposed on X and t by the existence of abelian G-covers f : Y → X defined over k and unramified outside t. We show that these constraints produce an obstruction to the weak regular inverse Galois problem for a whole class of profinite groups - we call p-obstructed - when k is a finitely generated field of characteristic ̸= p
The sources of decentralised output fluctuations in France
This paper examines the sources of disturbances to short-term and long-term output variations in the French regions. We use an error-components model that decomposes decentralised output movements into common national, industry-specific, region-specific, and idiosyncratic effects. We find that industry-specific disturbances account for the major part of the variance of the systematic component of decentralised output fluctuations. Moreover, decentralised regional policy strategies that do not target specific sectors within the region only have a very limited impact on both short-term and long-term sectoral output variations. Copyright (c) 2007 the author(s). Journal compilation (c) 2007 RSAI.
- …
