JPTV-Jurnal Pendidikan Teknik dan Vokasional
Not a member yet
113 research outputs found
Sort by
PENERAPAN MODEL PEMBELAJARAN BLENDED LEARNING UNTUK MENINGKATKAN HASIL BELAJAR MENGGUNAKAN APLIKASI MOODLE PADA MATA KULIAH METROLOGI INDUSTRI PROGRAM STUDI D3 TEKNIK MESIN UNIVERSITAS NEGERI JAKARTA
Get PDFThis study aims to improve learning outcomes for Industrial Metrology courses by applying the Blended Learning learning model using the web-based Moodle Application for students of the D3 Mechanical Engineering Study Program, Jakarta State University semester 111 (Odd 2019/2019). The method used in this research is Classroom Action Research (CAR) which is a form of investigation carried out by participants involved in the situation under study. Implementation of actions followed by observation and reflection activities. If necessary, at the next stage, a follow-up plan is drawn up. These efforts are carried out in a cycle to form a cycle. The place of research was conducted at the State University of Jakarta and the research subjects were 29 students of D3 Mechanical Engineering class B. This research was conducted from November 7, 2019 to December 19, 2019. Data on learning outcomes were obtained through a written test and then analyzed to compare the results of the exam in each cycle. The results of this study indicate that there is an increase in student learning outcomes in the Industrial Metrology course by applying a blended learning model using the Moodle application. The increase in learning outcomes can be seen where in the first cycle student learning outcomes with an average of 60, 11 students completed or 37.9% and 18 students have not completed or 62.1%. While in cycle II there was an increase in student learning outcomes, with an average of 77.5, 27 students completed or 93.1% and 2 students did not complete or 6.9% Researchers can conclude that student learning outcomes have increased by applying the Blended Learning learning model using the application Moodle.
Keywords: blended learning, moodle, learning outcomes, classroom action research, industrial metrolog
PERCEPATAN WAKTU PENGERJAAN PROYEK KONSTRUKSI DENGAN MENGGUNAKAN METODE FAST TRACK
Get PDFPenelitian ini bertujuan untuk mengetahui pengaruh metode Fast Track pada pelaksanaan proyek konstruksi pada proyek pembangunan Gedung Badan Nasional Penanggulangan Bencana yang berlokasi di Jalan Pramuka Raya, Jakarta Timur.
Penelitian ini dilakukan pada proyek pembangunan Gedung BNPB pada bulan September 2013 hingga Mei 2014 dengan metode survey dan wawancara. Setelah survey dan wawancara dilakukan di lokasi penelitian, data-data yang diperoleh dijadikan instrumen dalam pembuatan kuisioner yang selanjutnya diberikan kepada lima orang responden yang dianggap ahli pada bidang konstruksi.
Hasil penelitian ini untuk waktu pengerjaan proyek didapat persingkatan waktu selama 21 hari dari waktu yang direncanakan, dengan penambahan biaya yang ditinjau dari segi upah pekerja sebesar Rp. 197.400.000,- atau sebesar 3,4% lebih tinggi dari biaya upah sebelum penelitian ini dilakukan dengan nilai Cost Slope Rp. 9.400.000,
ANALISIS PENCEMARAN UDARA TERHADAP MASYARAKAT SEKITAR PROTEK MASS RAPID TRANSIT (MRT) JAKARTA CP 103 (Studi Kasus: Jl. Fatmawati, Cipete Utara)
Get PDFThis study aims to determine the impact of what is most felt by the people around the MRT Jakarta CP 103 project, North Cipete, South Jakarta. This research uses sub-indicators of noise impact and air quality degradation to know the most significant effect and impact factor from air pollution felt by people around North Cipete and South Gandaria due to MRT Jakarta CP 103 construction project. The questionnaire was based on noise and air quality reduction theory, summarized in questionnaire question items to obtain primary data in the MRT Jakarta CP 103 Project community. This study shows that the impact of noise and decreasing air quality resulting from the MRT CP 103 project is likely to be felt by the surrounding community. The project organizers did not explain the impacts resulting from the project in the AMDAL document. These results obtained factors that trigger the effect of disease and material losses felt by the public, namely the use of heavy equipment on the project that produces air pollution.
Keywords: air pollution, MRT, societ
STUDI KUAT TEKAN BAMBU TALI DAN BAMBU AMPEL AKIBAT SERANGAN RAYAP
Get PDFThis study aims to determine how the compressive strength of bamboo rope and bamboo Ampel due to termite attack. Where the research was conducted in the Laboratory Test Material Arboretum State University of Jakarta and Bogor Institute of Agriculture in October 1, 2016 - January 30, 2017. This research method using bamboo direct compressive strength testing in the laboratory. In the present study used two types of bamboo, the bamboo rope and bamboo Ampel totaling 40 samples. The total sample of each type of bamboo has the number of 20 samples. According to the position at the base and middle of each totaling 10 samples. For each position there are two treatments, bamboo fed and not fed termites, which amounted to 5 samples. Research conducted compressive strength based on ISO 22 157: 2004. The results showed that the value of the average compressive strength of bamboo and bamboo Ampel rope at the base position and center fed termites decreased from bamboo which is not fed termites. At the base of bamboo straps that are not fed termites of 54.688 kN / cm2.While at the base of bamboo rope that is fed termites of 50.729 kN / cm2.In the central part of bamboo straps that are not fed termites of 54.532 kN / cm2.While on the bamboo rope is fed termites central part of 53.583 kN / cm2.At the base of bamboo Ampel termites were not fed for 51 096 kN / cm2.While at the base of bamboo Ampel were fed termites of 47.084 kN / cm2.In the mid-section of bamboo Ampel not fed termites of 45.559 kN / cm2.While on bamboo Ampel the center that is fed termites of 37.702 kN / cm2.Thus the average value of the weight loss bamboo rope the base that is equal to 8.0% smaller than in the bamboo Ampel the base is equal to 15.1%. While the average value of the weight loss bamboo rope central part that is equal to 12.6% smaller than in the central part of the bamboo Ampel of 14.0%. The average value of compressive strength greater than the bamboo rope bamboo Ampel. This is because the content of starch in the lower rope bamboo from bamboo Ampel. In terms of weight loss (weight) of bamboo seen that the entire sample to lose weight. This is mostly due to termite attack on bamboo. However, bamboo is not attacked by termites also experienced weight loss and can be caused by factors such as the weather (sun and rain) and mushrooms
Keywords: study of bamboo, rope and ampel, termites attac
EVALUASI PROGRAM PELAKSANAAN PRAKTEK KERJA LAPANGAN (PKL) PROGRAM KEAHLIAN TEKNIK FURNITUR PADA SMK NEGERI DI DKI JAKARTA
Get PDFThis study aims to obtain information on how far the policy of Field Work Practice program (PKL) on the Department of Furniture Engineering at SMK Negeri in DKI Jakarta, which has been held several years with several industries. Furthermore, this study also aims to see what components that can affect the impact of Field Work Practice (PKL). The evaluation research is oriented to record how far the implementation of PKL Program of Engineering Furnitur at SMK Negeri in DKI Jakarta. By looking at the contex components, inputs, processes, products that have been implemented using the CIPP model approach. Data collection techniques can be done by observation (observation), interview (interview), questionnaire (questionnaire), and documentation (data storage). The result of descriptive analysis shows that at the context stage is Program Planning aspect, Government Policy and Legality (MoU) with Industrial World in Good category. Similarly for the stage of Input on the aspect of Academic, Curriculum, Facilities and Infrastructure as well as Financing included in the category of Good, the process stage includes aspects of curriculum and teaching materials, teaching and learning activities as well as cost in the category of Good, for the product stage that includes students' in the category of Good, to be made in the improvement of the implementation of the PKL convey some suggestions: for the context of planning, objectives, policies of street vendors must be made more clear and directed and Cooperation (MoU) expanded by involving the Ministry of Education and Ministry of Manpower. For Input, readiness of students, teachers, facilities and infrastructure and tools and materials are often updated in order to keep up with the development of the furniture industry. For the process of organizational activities, teachers and students in learning activities are improved continuously with appropriate methods of development of the furniture industry. For the product in achieving the target pass 100% competence exam and 100% get value ≥ 7.00 can be achieved continue to practice and enhanced student competence.
Keywords: CIPP model, context, innput, process, product
HUBUNGAN HASIL BELAJAR DASAR DESAIN DAN KREATIVITAS TERHADAP HASIL BELAJAR PEMBUATAN HIASAN
Get PDFThis study aims to determine the relationship between basic lessons of fashion design and creativity to student learning outcomes in the subject of making decoration. The test site of this research is conducted at SMK Negeri in DKI Jakarta study program of expertise of fashion field of tourism expertise. This research is done by giving test in the form of theory test and practice on Making Ornament subject. The method used in this research is quantitative research method correlational relationship between variables by using questionnaire. Using a sample of 172 students. The data generated by each variable is tested by using the validity, reliability, normality, regression, and correlation test. Test results in this study are as follows: a) There is a positive relationship between the basic subjects of design with the results of learning decoration, b) There is a positive relationship between creativity with the results of decorative learning and c) There is a positive relationship between basic subjects Design and creativity together towards the learning outcome of decoration making
Keywords: competency for design basic, creativity, the result of embroidery
EVALUASI PROGRAM PRAKTIK KERJA LAPANGAN KOMPETENSI KEAHLIAN TEKNIIK PENDINGIN DAN TATA UDARA SE-KOTA BEKASI
Get PDFThe aims of this research is to know about the effectiveness of Field Practice Programs by cooler technic and air conditioner competency in Bekasi academic year 2016-2017. It is evaluation research with CIPP evaluation model method with 4 components such as context, input, process and product. This research use purposive sampling technique with 66 students as object of study, 10 people from school and 6 DU/DI instructors. Technique of collecting data by observation, questionnaires, and documentation. Data analysis using Huberman model and mixed methods.. The result of the research shows : (1) context evaluation: there is imbalance between the number of MOU that owned by school and the number of PKL participants; (2) input evaluation: a) there is no curriculum implementation that arranged by cooperation of school and industry, b) Less of teacher’s participation as supervisor both when training held by government or industry; (3) process evaluation: a) 18% participant of PKL in non-cooler technic and air conditioner engineering industry, b) 23% participants do PKL less than 1 semester (about 3 months) in line with Permendikbud act 60 of 2014; (4) product evaluation: a) 65 % participants have very good category in work assessment, b) the effectiveness of PKL in very good category (83%) and the changes of performance known by the present of students before and after of PKL.
Keywords: air conditioning, cooling, evaluation, learnes, practice
PENGEMBANGAN MEDIA PEMBELAJARAN E-LEARNING BERBASIS EDMODO PADA MATA PELAJARAN PRAKARYA KEWIRAUSAHAAN KELAS X SMA
Get PDFThe purpose of this study was to develop Edmodo-based learning media in SMA Negeri 17, Bekasi City. The method used in this research is the research and development (R&D) method using the Borg and Gall model. The research was carried out by starting the research stage and information and planning, preliminary development of the product, preliminary field testing, revision of the main product, objectives and implementation. The development stage is carried out in three stages, namely product manufacturing, internal product testing, and product revision. Testing was carried out by 3 experts, namely 2 instructional media experts, and 1 material expert. The results of the study were carried out with the CVR results, stating that learning was very feasible to use, with a percentage of 93% and 100%, and material experts related to learning materials were very feasible to use with a percentage of 90.91%. It was conveyed that the development of Edmodo-based e-learning learning media in PKWU subjects, batik material is suitable to be applied in high school through distance learning, so that it is more supportive of teachers to deliver learning materials well.
Keywords: E-Learning, Edmodo, PKWU, Bati
HUBUNGAN PENGGUNAAN MEDIA PEMBELAJARAN TUTORIAL INTERAKTIF DAN MOTIVASI BELAJAR DENGAN HASIL BELAJAR SISWA MATA PELAJARAN MENGGAMBAR DENGAN PERANGKAT LUNAK (Studi Kasus di SMK Negeri 1 Sintang)
Get PDFThis research aimed to know the correlation between the of tutorial interactive learning instructional media and learning motivation toward learning results, Indonesian history subject, of senior high students at SMK Negeri 1 Sintang. As the result, it showed that instructional media and learning motivation positively influenced students learning result. These results indicate that the use of interactive tutorial learning media can be used to improve student learning outcomes.
Keywords: instructional media, learning motivation, learning result
PENGARUH KOMPETENSI DAN MOTIVASI KERJA TERHADAP KINERJA KARYAWAN PT. HUTAMA KARYA (PERSERO) WILAYAH II PADA PEMASANGAN GIS 150 KV KALIBARU PT. PELINDO II DI JAKARTA
Get PDFGood and high employee performance can be achieved if all components of the company are integrated in a sustainable and good. The purpose and purpose of this study is to determine the effect of competence and work motivation on the performance of employees of PT. Hutama Karya (Persero) Region II on installation of GIS 150 kv Kalibaru PT. Pelindo II in Jakarta. To analyze and know about the influence of independent variable (competence and work motivation) on dependent variable (employee performance), then used correlation and regression test to know the most influential variable. Using simple random sampling (Simple Random Sampling), with 45 respondent samples of employees of PT. Hutama Karya (Persero) Region II on installation of GIS 150 kv Kalibaru PT. Pelindo II in Jakarta, while data processing using SPSS 16. From the results of tests that have been done, simultaneous regression test (F test) shows that all independent variables studied have a positive and significant effect on employee performance variables. Partial regression test (t test) shows that the competence variable has a positive and significant effect to employee performance variable. The magnitude of the effect caused by (Rsquare) by the variable of competence and mutual motivation toward the employee performance variable is 58,3%, while the rest 41,7% influenced by other variable not examined in this research.
Keywords: competence, employee performance, work motivatio