Hochschule Ruhr West
Not a member yet
812 research outputs found
Sort by
About a Decentralized 2FA Mechanism
No full textWeb based security applications have become increasingly important in the past years. Especially in times of blockchain based crypto currencies, user authentication is a critical aspect for the overall security, integrity and acceptance of such systems. While blockchain technologies provide a decentralized approach, the client side still largely relies on centralized security approaches. Those centralized approaches are easier to implement, but at the same time bear the risk of usual security flaws. Therefore, this paper presents a decentralized approach for increasing the security by adding a decentralized two-factor authentication mechanism to the execution of
operations
CameraFramework - Socket-Kommunikation als Middleware zwischen verschiedenen Kamerainstanzen mit eigenen Kameratreibern und Clienten
No full textDas CameraFramework wurde entwickelt, um mittels Socket-Kommunikation [1] als Middleware zwischen verschiedenen Kamerainstanzen mit eigenen Kameratreibern und Clienten zu fungieren. Über diesen Kommunikationsweg ist es möglich Clienten nicht nur lokal, sondern auch über das Netzwerk mit Kameradaten zu versorgen. Um neue Kameras mit dem Framework nutzen zu können, muss die Implementierung gewissen Regeln folgen, was durch ein vorgegebenes Basis-Interface (abstrakte Basis-Klasse in C++ [2]) fast vollständig sichergestellt ist. Neue Kameras werden zur Laufzeit über dynamische Bibliotheken geladen. Parameter für Kameras sind über ein XML-File [3] einzustellen. Funktionen zur Übergabe von neuen Kameradaten sind implementiert und müssen durch den Entwickler der einzelnen Kamerainterfaces aufgerufen werden.
Die Zuordnung von Kameradaten zum passenden Nutzer übernimmt das Framework. Jeder Clienterhält seinen eigenen konfigurierbaren Ringbuffer [4] um unabhängig von anderen Nutzern und Kameras zu sein. Die Aufgaben des Frameworks sind auf verschiedene Module, wie in Abbildung 1 dargestellt, aufgeteilt
Process Monitoring in Steel-Mills using Impedance Analysis: VNA Improvement for Data Acquisition
No full textThe process automation extends over every manufacturing step of a product in the steel-mill to increase the quality, quantity and energy efficiency. The product dimensions are an important part of the quality control; these must maintain the specified tolerances. Additional to the cross-sectional-area, the measured data contains much more information about the manufacturing process, e.g. eccentricity, condition of the rolls and defects of the rod. For analyzing the measured data and to gather more information about the manufacturing process it is necessary to increase the speed of the data acquisition by performing some modifications of the VNA, e.g. faster analog to digital converter and microcontroller, improved firmware and optimized values of the passive electrical components for faster time constants and transient responses
A Large and Quick Induction Field Scanner for Examining the Interior of Extended Objects or Humans
Get PDFThis study describes the techniques and signal properties of a large, powerful, and linear-scanning 1.5 MHz induction field scanner. The mechanical system is capable of quickly reading the volume of relative large objects, e.g., a test person. The general approach mirrors Magnetic Induction Tomography (MIT), but the details differ considerably from currently-described MIT systems: the setup is asymmetrical, and it operates in gradiometric modalities, either with coaxial excitation with destructive interference or with a single excitation loop and tilted receivers. Following this approach, the primary signals were almost completely nulled, and test objects' real or imaginary imprint was obtained directly. The coaxial gradiometer appeared advantageous: exposure to strong fields was reduced due to destructive interference. Meanwhile, the signals included enhanced components at higher spatial frequencies, thereby obtaining a gradually improved capability for localization. For robust signals, the excitation field can be powered towards the rated limits of human exposure to time-varying magnetic fields. Repeated measurements assessed the important signal integrity, which is affected by the scanner´s imperfections, particularly any motions or respiratory changes in living beings during or between repeated scans. The currently achieved and overall figure of merit for artifacts was 58 dB for inanimate test objects and 44 dB for a test person. Both numbers should be understood as worst case levels: a repeated scan with intermediate breathing and drift/dislocations requires 50 seconds, whereas a single measurement (with respiratory arrest) takes only about 5 seconds
In-situ photoluminescence measurements during MOVPE of GaN and InGaN in a CCS reactor
No full textGallium Nitride (GaN) and Indium Gallium Nitride (InGaN) have become important semiconductor materials for the LED lighting industry. Recently, a photoluminescence (PL) technique for direct in-situ characterization of GaN and InGaN layers during epitaxial growth in a planetary metalorganic vapor phase epitaxy (MOVPE) reactor was reported. The PL signals reveal – at the earliest possible stage – information about current layer thickness, temperature, composition, surface roughness, and self-absorption. Thus, the PL data is valuable for both controlling and optimizing the growth parameters, thereby promising both better devices and a better yield for the LED industry. This technical report describes an extension of this PL technique to close coupled showerhead (CCS) reactors with narrow optical viewports. In contrast to the wide aperture optics in previous investigations, a compact and all-fiber optical probe without voluminous lens optics, filter elements or beam splitters was used.Gallium Nitrid (GaN) und Indium Gallium Nitrid (InGaN) sind mittlerweile wichtige Halbleitermaterialien für die LED-Beleuchtungstechnik. Über eine Photolumineszenz (PL)-Technik für eine direkte In-situ Charakterisierung von GaN- und InGaN-Schichten während des epitaktischen Wachstums innerhalb eines Metal Organic Vapor Phase Epitaxy (MOVPE) Planeten-Reaktors wurde kürzlich berichtet. Die PL-Signale liefern – zum frühestmöglichen Zeitpunkt – Informationen über die aktuelle Schichtdicke, Temperatur, Komposition, Oberflächenrauheit und Selbst-Absorption. Somit sind die PL-Daten sowohl nützlich zur Kontrolle als auch zur Optimierung der Wachstumsparameter und damit vielversprechend für bessere Produkte und eine bessere Ausbeute in der LED-Industrie. Dieser technische Bericht beschreibt eine Erweiterung dieser PL-Technik auf Close Coupled Showerhead (CCS) Reaktoren mit eingeschränkten optischen Zugängen. Im Gegensatz zu verwendeten Optiken mit weiter Apertur in vorherigen Untersuchungen wird hier eine kompakte, komplett-faserbasierte optische Sonde ohne voluminöse optische Linsen, Filterelemente oder Strahlteiler verwendet
Increasing Security of Nodes of a Blockchain by Simple Web Application Firewalls
No full textIn recent times, a lot of attacks against central server infrastructures have been recognized. Those infrastructures have seen attacks ranging from attacks against Internt of Things (IoT) infrastructures, via attacks against public infrastructure to attacks against cryptocurrency exchanges and blockchain based infrastructures themselves, e.g., the already almost legendary Decentralized Autonomous Organization (DAO) hack. Measured by press coverage, attacks against cryptocurrency exchanges and infrastructures seem to be among the most prominently reported attacks, probably due to the large amount of money that is stolen during those attacks and the great (but obviously still quite risky) potential (and financial involvement) of the blockchain technology. Naturally, attacks like the ones we have seen recently in crease the notion of uncertainty of blockchain technologies among the people,mreflected in lower values of cryptocurrencies in general. Obviously, this demands for an overall increase of security of cryptocurrency based technologies. Therefore, this paper provides an architectural approach, based on a proxy,to increase security of publicly available nodes of a blockchain based technology. Furthermore, it provides a first evaluation of the approach based on the results of an extensive community test of a new cryptocurrency
Dynamic Hand Gesture Recognition for Mobile Systems Using Deep LSTM
No full textWe present a pipeline for recognizing dynamic freehand gestures on mobile devices based on extracting depth information coming from a single Time-of-Flight sensor. Hand gestures are recorded with a mobile 3D sensor, transformed frame by frame into an appropriate 3D descriptor and fed into a deep LSTM network for recognition purposes. LSTM being a recurrent neural model, it is uniquely suited for classifying explicitly time-dependent data such as hand gestures. For training and testing purposes, we create a small database of four hand gesture classes, each comprising 40 × 150 3D frames. We conduct experiments concerning execution speed on a mobile device, generalization capability as a function of network topology, and classification ability ‘ahead of time’, i.e., when the gesture is not yet completed. Recognition rates are high (>95%) and maintainable in real-time as a single classification step requires less than 1 ms computation time, introducing freehand gestures for mobile systems
