76059 research outputs found
Sort by
������ ��������������� ��������������� ��������� ��������� ������ ������
Steels have been widely used as structural materials due to an extensive range of mechanical properties from moderate strength levels with excellent ductility to very high strengths with adequate ductility. However, as the increasing demands for the fuel efficiency and safety in industrial fields, various researches for improving the mechanical properties of steels have conducted based on the microstructure control through the chemical composition and heat treatments. This means that the microstructure can be a strong parameter for improving the mechanical properties of steel. Therefore, it is important to define how the microstructure contributes to the mechanical properties of steels.
In this study, the microstructural analyses by using optical microscopy (OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) carried out to understand the relationship between the microstructure and mechanical properties in conventional structural steels such as high-strength low alloy (HSLA) steel, high manganese (Mn) steel and high chromium (Cr) heat-resistant steel. Mechanical properties of these steels were examined through the tensile test, hardness test, and thermo-mechanical deformation system, and all tests were performed in accordance with the standard. In addition, a commercial thermodynamic calculation program (FactSageTM) was used to investigate the equilibrium phase according to the conditions of chemical compositions and heat treatments.
In HSLA steel, the static recrystallization behavior with carbide forming elements, such as titanium (Ti), niobium (Nb) and vanadium (V) was investigated. As a result of TEM analysis, the static recrystallization was retarded by the MX types of precipitates formed during the hot deformation. The results of nano-indentation and tensile tests showed that the precipitates formed at elevated temperature decreased the strengthening effect by interphase precipitates (IP). Therefore, the hot rolling process should be conducted above the non-recrystallization temperature (Tnr) to maximize the IP strengthening effect in HSLA steel. Consequently, the high-strength steel sheet with a 980 MPa grade was produced at a pilot scale.
In high Mn steel, the precipitation strengthening was obtained by the formation of the fine V(C, N) precipitates had a cube-cube orientation relationship with the austenite matrix. Meanwhile, the precipitation strengthening was not obtained in the steel containing titanium elements because the coarse Ti(C, N) precipitates with a size of several hundred nanometers or more were formed. Furthermore, ��-martensite transformation after plastic deformation was observed only in steel containing the coarse Ti(C, N) precipitates. As a result of TEM analysis, this phenomenon was due to the reduction of stacking fault energy by the consumption of soluble carbon elements. Consequently, in Fe-18Mn-0.4C alloy system, the precipitation strengthening by the fine V(C,N) precipitates without the ��-martensite transformation was obtained when the remaining carbon contents were 0.374 wt%.
In high chromium (Cr) heat-resistant steel, Laves phase precipitates were mainly formed at prior austenite grain boundaries after long-term annealing treatment. Moreover, the growth rate of the Laves phase precipitates was faster than that of the other precipitates such as M23C6 and MX precipitates. As a result of TEM analysis, the values of Fe/Cr and W/Mo in Laves phase precipitates were found to steadily increase during the annealing treatments. In addition, these compositional changes resulted in an increase of strain energy at the interface between the Laves phase precipitates and ferrite matrix. Consequently, this promoted the attainment of the critical strain for the formation of cavities, even though the Laves phase precipitates had the same size.Docto
Effect of Melting Condition on Microstructure and Mechanical Properties of CoCrFeMnNi High Entropy Alloy
The casting is one of the most widely used processes for manufacturing the high entropy alloy (HEA) and is also appropriate to the mass production of alloys. However, several kinds of defects such as segregation, micro-pores and non-metallic inclusions (NMI) are inevitable during melting and casting processes. It is well known that these process-induced defects deteriorate the mechanical properties of the final products. In this paper, therefore, the origin of NMI formation and its effect on the microstructure and mechanical properties of HEA manufactured under different melting conditions were investigated. Equiatomic CoCrFeMnNi HEA was melted under different atmospheric conditions, i.e., vacuum, highly purified argon and atmospheric (i.e., air exposure) condition. After melting, the amount of interstitial impurities such as C, S, N and O in the solidified samples was measured and the characteristics of NMIs such as size distribution, number density, area fraction/surface area, morphology and chemical composition were analyzed. The features of crystallographic structure of each inclusions was analyzed by XRD and TEM and their effect was confirmed. Finally, consequent mechanical properties were investigated.Maste
Gas sensor device operating at room temperature using one-dimensional semiconductor and nano-to-micrometer architectures
������������(nano-technology)��� ��� 10������������ ������������ ������ ������(solid-state) ��������� ��������������������� ��������� ������ ������ ������, ������ ������ ������, ��������� ������ ��������� ������ ��� ������ ������������ ������ ������������(E-nose)��� ������ ��������� ��������������� ������������ ��� ������ ��������� ������������ ������ ��������� ��������� ��������� ������. ��������������� ��������� ��������� ������ ������-������ ���(surface-to-volume ratio), ������ ��� ���������, ������ ������ ������������ ��������������������� ��������������� ������������ ��� ������������, ������������ ��� ������ ������������ ������������ ��������� ������ ��������������������� ������������ ��������� ��������������� ��������� ��� ������������ ������ ������.
��������� ��� ������������ ������������ ��������������� ������ ������������ ��� ��� ������������ ������ ������ ��������� ������ ��������� ���������������. ������ ���������, ��������� ������ ��� ��������� ��������� ��������������� ��������� ������ ������������ ������������ ���������, ������������ ��������������� ������������ ��������� ��� ������ ������������ ������ ��� ��������� ������ ��������� ���������������. ��� ��������������� ��� 6������ ��������� ������������ ������.
���1���(Introduction, ������)��������� ������ ������(Sensing) ��������� ������ ������������ 3������ ��������� ���������������. ������ ������������ ��������� ������������, ������������ ������ ��� ��������������� ������ ��������� ���������, ��������������� ���������������.
���2���(Fundamentals, ������������)��������� ������ ������ ��������� ��������� ��������� ��������������� ������������ ������. ������������ ��������� ��������� ��������� ������������ ��������� ������ ��������� ������������ ������������ ������������ ��������� ��������� ������������ ��������� ������ ��������������� ������������, ������������ ��������������� ������������ ��� ��������������� ������ ��������� ������������ ������.
���3������������ ��������� ������ ��������� ������ ���������(Tellurium, Te)��������� ������������ ��������� ������������ ��������������� ������������ ��������� ��������������� ���������������. ��������� ��������������� ������ ��������� ������������ ������������ ������ ������������ ���������������������������(Microelectromechanical systems, MEMS)������ ��������� ��������������� ������������ ������������ ��������� ������������ ��� ��������� ������ ��� ������ ��������� ������������. ������ ������������ ������ ��������� ������ ������������ ��������� ������ ��������� ������ ��������� ��������� ������ ���������������. ������ ��������� ������������ ��������� ������������, ��������� ���(Au) ������ ��������� ������ ������ ������ ��������� ��������� ������ ��� ���������.
���4������������ ��������� ��������������� ������ ��������� ������ ������ ��������� ������������(MLCC, multi-layered ceramic capacitor)��� ��������� ��������� MLES(multi-layered ceramic/metal electrode system)��� ������������ ��������� ��������������� ��������� ������ ������ ������ ��� ������������ ���������������. ������ ������ ��������� ������ ��������� ������������ ������ ������ ��������� ������������ ������, ���������������, ������������ ��� ������������ ������������ ������ ��������� ������ MLES��� ������ ��������������������� ������������ ������������������, ��������� ������������������ ������ ��������������� ��������� ������ ������������ ������������������ ������ ������������ ��������������� ������������ ���������������.
���5������������ ��������� ������������������ ������ ��������������� ��������� ��������� ��������� ������ ������������ ��������� ��������������� ��������������� ��������� ������������ ��������������������� ��������������� ���������������. ��������� ������ ��������� ������ ��������� ������������������, ������������ ��� ��������� ������ ��������� ������ ������������ ������ ������ ���������������.
��������������� 6������������ ������������ ������ ��� ������������ ��������� ���������������.Docto
��������������������� ��������� ������ ������ ������������ ������ ������������ ��������� ��� ��������� ������
Stem cells have been considered as regenerative medicine for therapy of diseases. Especially, mesenchymal stem cells (MSCs) were known to have multipotent and were widely used for treating diseases. Recent studies have reported that hypoxia preconditioning enhanced the therapeutic potency of stem cells. However, teratoma formation, immune response and low viable rate were considered major disadvantages of stem cell-based therapies. Stem cell-derived exosomes, which played a role in cell-to-cell communication and were known as key regulators of the paracrine effect, were raised as a new alternative to overcome the limitations of stem cell-based therapies. In this study, we produced exosomes from human adipose-derived stem cells (HASCs) under hypoxic condition and used it for the treatment of pulmonary fibrosis. To prepare exosomes, tangential flow filtration (TFF) based multi-filtration system was used. We found that hypoxia-conditioned exosomes (Hy-EXOs) contained more anti-fibrotic factors and growth factors than normoxia-conditioned exosomes (Nor-EXOs). Hy-EXOs reduced expression of pro-fibrotic factors and attenuated pulmonary fibrosis. These results suggested that Hy-EXOs act as biochemical cue for regenerating lung tissue and provide a new approach to pulmonary fibrosis treatments.Maste
Adaptive beam width control technique accounting for user mobility in millimeter wave communications
������ ��������� ��������� ������������ ��������������� ������ ��������� ������ ������������ ��������������� ��������� ������������ ������. ��������� ������������ ������ ��������������� ��� ������������, ������ ������������ ������ ��� ��������� ��������� ��������� ������ ������ ��������� ��������� ��������� ��������� ������. ��������� ������ ������������ ��������� ��������� ��������� ��������� ������ ��������������������� ��������������� ������������ ��� ������. ��������� 4������ ������������ ��������������� ��������������� ������������ ��������� ������������������ ��������� ������������ ������ ��������� ��� ������������ ������ ������������ ��������� ������������ ������ ������������ ��� ��������������� ������������ ������ ��������� ��������������� ������������.
��� ��������������� ������������ ��������������� ��������� ������ ��� ��������� ��������� ������ ��������� ������������ ������������ ������������ ��������� ������ ��������� ��������������� ������������ ��������� ��������� ������������. ������������ ������������ ��������� ������������ ������������ ������ ������ ��������� ��������������� ��������� ������������ ������ ��������� ������������. ��������� ������������ ������������ ��������� ������������ ������ ������ ������ ��������������� ������������ ��������� ���������������.
��� ��������� ������������ ������������ ������������ ��������� ��������� ��������� ������������������ ������ ��������� ������������ ��������� ��������� ������������, ��� ������ ��������� ������ ��������� ��������� ��������� ��������������� ���������������. ��� ������ ��������� ������������������������ ��������� ��������������� ������������ ������������ ��������� ��������� ��������������������� ������������ ���������. ��������� ��������������������� ������������ ������ ��� ������������ ��������� ������ ��������� ������������. ��� ������ ������������ min-max ��������������� ��������� ��������� ��������� ������������. ������������ ��������� ��������� ����� ������������ ������������������������ ����� ������������ ��������������� ������������. ��� ������ ��������� ������������ ��������������� ��������� ������ ������ ��������� ��������� ������������ ������.
������������ ��������� ��������� ��������� ��������� ������������ ������ ������������ ��������� ��������� ��������������� ��������� ������ ������ ��������������� ������ ��������� ��� ������. ������ ������������ ������������ ������ ��������� ������������ ��������� ������ ������ ��� ������������ ������������ ��������������� ��������� ������������ ������ ������������ ��������� ��������� ��������� ��������������� ��������� ��������� ������������ ������ ���������������.Maste
A Study on the Improvement of the Arc Flash Detection Based on Ultraviolet of a Specific Wavelength
������������ ������������ ��������� ������������ ������ ��������������� ��������� ������ ������������ ��� ��� 40% ������ ������������ ������. ��������������� ��������� ������������ ��������� ��������������� ��������������� ������ ��������� ������ ������ ������������ ������ ������. ��������� ��������� ��������� ������������ ������ ������ ������ ������������ ������ ������ ������������ ������������ ������ ������ ������������, ������ ��������� ��������� ������ ��������� ��������������� ������ ��������� ������������ ��� ������ ������������. ��� ��������������� ��������������� ��������������� ��������� ������ ������ ������ ������������ ������������ ������ ������������ ��������� ��������� ������������ ������������ ������������ ��������� ��������������� ������. ������������ ��������� ������������ ��������� ��� ������, ������ ��������� ������ ��������� ������������ ��������������� ������ ��������� ������ ������ ��������� ������������ ��������� ������������. ������������ ������ ��������� ��������� ������ ������������ ��������������� ������ ������ ������ ���������������, ������ ������������������ ��������� ������ ������������ ��������������� ��������� ��� ������.Maste
Maximum Power Point Tracking Control for Photovoltaic Generation Using Quasi-Continuous Sliding Mode Control
��������� ��������� ������ ������������ ������ ��������� ������ ������������ ������������ ��������� ��� ��������������������� ��������� ������. ������ ��� ������������, ��������� ������, ������ ��������� ��������� ������ ������ ������������ ��������������� ������������ ��������� ��������� ������������. ��������� ��������� ������ ������ ������(Maximum Power Point Tracking, MPPT)��� ������������ ������ ��������� ��������� ������ ������������ ��� ��������� ������ ������(DC/DC ���/������ DC/AC ���������) ��������� ��� ������ ������������ ������ ������ ������. ������ ������ ��������� ������������ ������������, ��������� ������ ��������� ��������� ������ ��������� ��������� ������ ������ ��������� ������������ ������ ������ ��������� ������������ ������������ ������. ������ ������ ������ ������������ perturb and observation, adaptive perturb and observation, incremental conductance, sliding mode control, fuzzy logic control ������ ������.
��� ��������������� ��������� ������������ ������ MPPT ��������������� ������ ������ ��������� ������������, ��� ������������ ��������� MPPT ��������������� ������ ��������� ������������. ������ sliding mode control ��������� ��������� ������ ������ ��� ��������� ��������� ������ ��������������� ��������� ���������, ��������� Chattering��� ������������ Quasi-continuous sliding mode control ��������� ������ ��������� ��������� ������ ������ ������ ��������� ������������. ��� ��������������� Admittance based MPPT ��������������� ������������������, ��������� ������������ sliding mode control ��������� Quasi-continuous sliding mode control ��������� ��������� ��������� ������ Quasi-continuous sliding mode control ��������� ������������ second order term��� saturation function��� ������ chattering��� ������������ ��������� ��� ������.Maste
The effect of dysfunctional customer behavior on employee performance: The moderating role of social support
��� ��������� ��������� ������������ ������������ ��������������������� ��������� ��������� ������������������ ��� ��������������� ��������� ��������� ������������ ��������������� ���������������. ��������� ��������������� ��������� ��������� ��������� ��������� ��������� ��������� ������(NA)��� ������ ��������� ������������ ��������� ��������� ��������������� ���������. ������ ��������� ��������������� ��������������������� ��������������������� ���������������. ��������� ������ ��������� ������������ ������ ��������� ������(������������, ���������, ������, ������)��� ������������ ��������� ������������������ ��������������� ��������� ��������� ������������ ��������������� ��� ��������������� ���������������.
������ ������ ��������������������� ��������������������� ��������� ��������������� ��������� ��������������� ������������������, ��������� ��������� ��������������������� ��������������������� ������ ��������������� ��������� ��������� ������������ ������ ��������������� ������������. ���, ������������������ ��������������������� ��������� ��������� ��������� ��������������� ��������������� ��������� ���������������. ��������� ��������� ��������������� ��������������������� ��������������������� ������ ��������������� ��������� ��������� ��������������� ��������������� ������������ ���������. ��������� ��������� ��������� ��������� ��������� ��������� ��������� ��������� ��������� ��� ������ ��������������� ������ ��������������� ��������� ��������� ������ ������������ ��������������� ������ ��������� ��������� ������������ ��������� ������������������ ��������� ��������� ��������� ��������� ������������ ������. ��������� ������������ ��������������������� ������������ ��������� ������������ ��������������� ������������������ ������ ��������� ������������ ��������� ��������� ������, ������, ��������� ��������� ������������ ��������� ��������� ��������� ������ ��� ��������� ��������������� ������������ ��������� ������.Maste
��������� ��������� ��������� ������������ ������������ ������ ������
��� ��������� ��������� ��������� ��������� ��������� ��������� ������������ ������������ ������ ������ ������������ ������ ��������� ������������ ���������. ��������������� ������ ��������� ��������� ��������� ������ ������������ ������ ������������ ��������������� ������ ������������ ������ ������������. ������������ ������ ������������ ������ ��������� ������������ ��������� ��������� ��������� ������������ ������ ������ ������������ ������ ��������� ������ ��������� ���������������.
��������� ������������ ��������� ��������� ��������� ��������� ��� ������������ ������ ��������������� ������ ��� 154������ ������������ ��������������� ���������������. ������������ ��������� ��������� ������, ������������, ������ ���������, ������ ������ ������ ��� ��� ������������ ���������������. ��� ��������� SPSS��� ������������ ��������� ������������ ���������������.
������ ��������� ��������� ������. ������, ��������� ��������� ��������� ��������� ��������� ������ ������������ ������ ��������������� ������������ ��������� ������ ���������. ���, ������ ������������ ������ ������ ��������� ��� ���������. ������, ��������� ��������� ��������� ��������� ��������� ��������������� ������������ ��������� ������ ���������. ������, ������ ������ ������ ������, ������, ������, ������������, ������ ������ ������ ������ ��������������� ��������� ������ ���������.
������ ������ ��������� ������ ��������� ��������� ��������� ��������������� ������ ��������� ��� ������������ ��� ��������� ��������� ������ ��������������������� ��������� ��������� ��������� ������������.Maste
Low temperature processed IGTO thin-film and transistor for high performance
��� ��������������� ������ ��������������� ������ ��������� ������ ������ ��������� ��������� ��������� Metal oxide Thin film transistors (TFTs) ��������� ��������� ������ ������. ������ ������������ ������ ������ ��������� ��������� IGTO ������ ��� TFT��� ��������� ������������ ���������������, ������ ������ ��������� Hybrid Gate dielectric��� ��������� IGTO Top gate TFT��� ��������� ���������������.
������, IGTO ��������������� Sputtering ������ ��������� ������ ������ ��� TFT ������ ��������� ���������������. 200������ ������ ������������ ��������� ��������� IGTO TFT��� ������ ��������� 7mtorr������ 3mtorr��� ������������ ������ ������ ��������� (��FE) 26.2 ��� 32.4 cm2/Vs, ��������� ��������� (Subthreshold Swing, SS) 0.41 ��� 0.11 V/decade ��� ��������� ������ ��������� ���������. ��������� ������ ��������� ������������ ������ ������������ PBS, NBS��� ��������� ��������� ���������������.
������ ������ ������ ��������� ������ Sputter Chamber ������������ ������������ ��������������� ������������ ������ ��������� ������������ ������, ��� ��������� ��������� ��������������� ��� ��������� ��������� ��� ������ ������ ������������ ��� ������������ ��������� ��������� ��� ������. ��� ������ ������������ ������ IGTO ��������� ITO ������ ��� ������ ��������� ������������ ������ ��� ������ ��������� ������, ������ ��������� ������ ��������� ������������ ��������� ��������� ������������ ��������� ��������� ��� ������.
150������ ������ ������ ������������ ������ ������ ������ ��������� ������ ������ ��������� ������ ��� ��� ��������� ������ ������ ������ ��������� 3mtorr ������������ IGTO TFT��� ������ ��������� (��FE) 35.0 cm2/Vs, ��������� ��������� (Subthreshold Swing, SS) 0.17 V/decade, ������ ������ (VTH) -0.45 V, ������ ������ ��� (ION/OFF) ~108 ��� ��������� ��������� ��������� ��������� ���������������. ��������������� ��������� ������ ��������� ��������� IGTO ��������� ������������, ������ ������ ������ 150��������� Hybrid ������������ ��������� IGTO Top gate TFT��� ���������������.Maste