76059 research outputs found
Sort by
������������������������ ��������������� ������ ��������� ������ ������
Research in metallic glasses is becoming popular due to their excellent material properties such as high strength, high hardness, wide elastic range, low internal friction. In these researches, the free volume of metallic glasses becomes an important research topic since it reflects the internal structure of metallic glasses which can affect both thermodynamic and mechanical behaviors. However, the main methods to probe the free volume is still mostly constrained by experimental approaches which are complicated, costly and time-consuming. Hence, computational approaches have been proposed to estimate the free volume of metallic glasses from computation rather than experiment. This paper provides a new method to compute and analyze the free volume quantitatively from atomic level by using Voronoi diagram of atoms. The unfilled space, which is the interstitial space not occupied by atoms in metallic glasses and also in the crystalline alloy with same composition, is computed by using the beta-decomposition based on the Voronoi diagram. Then, the free volume is calculated as the difference between them. We calculated the free volumes of six different kinds of metallic glasses and compared our result with the results from another method. We found that there is a reasonable difference between two results which indicates that our result is reasonable and acceptable.Maste
��������������� ������������������ ��������� ������������������ ������ ������������ ������������ ��������������� ������ ������
This research presents Molecular Dynamics (MD) simulations to characterize the tensile behaviors of aluminum (Al) composites reinforced with carbon nanotubes (CNTs). The positions, alignments and condensations of CNT inside aluminum composites are stochastic in real and they influence the tensile behaviors of the composites. Thus, it is important to quantize the strengths of the CNT-Al composites depending on the configurations of CNTs. For this, the angles of the CNTs are varied inside an aluminum composite to estimate the yield strengths of the composites using MD simulation. Compared with the strength of pure Al composite, the Young���s modulus of an aluminum composite increases about 20 GPa from 71.52 GPa to 92 GPa (Chiral vector (6,6), 0 degrees). However, with inclined carbon nanotubes, the strength is deteriorated due to the interface slip and the necking of Al block. Some deteriorations of yield stress and yield strain are observed due to premature failure of the CNT���Al composite due to local buckling.
In addition, the longitudinal modulus of elasticity was simulated by the number of CNT walls and angle, and as a result, the elastic modulus increased as the number of walls of the nanotube increased, and the material properties of the CNT-Al composite became brittle. We also find out that the modified rule of mixture (MROM) can be used to characterize the effect of geometrical characteristics of SWCNT (Single Wall Carbon Nano Tube)-Al composite.Maste
��������� ��������� ��������� ������ ������/������������������������ ������������ ��������� ��������� ��������� ��������� ������
��������������� ��������� ��������� ��������� ��������� ��������������� ��������� ��������� ������������ ��������� ������ ��������� ��������� ������ ��� ������ ��������� ������������ ������������ ������. ������/������������ ��������� ��������� ��������� ��������� ��� ������ ������ ������������ ��������� ������������ ��������� ��������� ��������� ������������. ��� ��������������� ������������ ��������� ��������� ������������ ������/������������ ��������� ��������� ������ ������ ������ ��������� ������ ������������ ��������������� ��������� ������������ ������������ ������ ��������� ���������������.
������, ��������� ��������� ������������ ������������ ��������� ��������������� ������ ��������� ��������������� ������������ ��������������� ��������� ������ ��������� ��������������� ������������ ������ ��������� ��������� ������ ��� ������. ������������ ��������� ��������������� ��������� ��������� ��������������� ������������ ������ ������ ������������ ������ ��������� ������ ������������ ��������� ������ ������������ ������ ��������� ��������� ��������� ������ ������ ��������� ��� ��������� ������ ��������� ��������� ������. ������ ������ ��������������� ������������ ��������������� ��������� ������������������ ��������� ��� ������������ ������������������ ������ ������ ��������� ������ ��������� ��������� ��������� ������ ��������� ������������ ������������ ��������� ������ ��������� ��� ������������ ��������� ��������� ������������ ���������������.
������, ��������� ��������� ��������� ��������� ��������� ������������ ������������ ������ ��������� ������ ��������� ������ ������ ������ ������������ ��������� ������ ��������� ��������� ��������� ��������� ������ ��������� ������ ������ ������ ������������ ������ ��������� ��������������� ��������� ��������� ������������ ������ ������������������ ��������� ��������� ���������������. ������������ ��������� ��������� ������������ ������ ��������� ������ ��������� ������ ��������� ��������� ��������� ��� ��������� ������ ������ ��������� ��������� ������������ ��������� ������ ������ ��������� ��������� ��� ��������� ��������������� ��������� ������ ��������� ������������ ������ ��������� ��������� ��������� ��������� ��������� ��� ��������� ������������.
������, ��������� ������������ ������ ��������� ������ ��������������� ��� ������������ ���������(Si) ������ ������������ ��������� ������ ��������������� ��������� ������ ������������ ������ ��������� ������������ ������ ������������ ��������� ��������� ������ ��������� ���������������. ��������������� ������������ ��������� ������ ������������ ������������ ��������� ������ ������ ��������� ������ ������ ��������� ������ ������������ ������������ ��������� ��������� ��������� ������������ ��������� ��������� ������������ ������������������ ��������� ������ ��������������� ��������� ������������ ������ ��������� ������ ��� ��������� ������������ ��������� ������������ ��������� ������������ ������������ ��������� ��������� ��������� ��������� ��������� ������������������ ��������� ������ ��������� ������ ��� ��� ��������� ��������������� ��������� ��������� ������������ ������������ ������ ��� ��������� ��������������� ���������. ��������� ��������� ������������ ��������� ��������� ��������� ��� ������������ ��������� ������ ��������� ��������� ������������ ������ ��������� ������ ��������� ������������ ��������� ��������� ������������ ������ ������ ��������� ��������� ��������������� ��������� ������������.
��� ������������ ��������� ��������� ��������� ��������������� ������������ ��������� ��������� ������������ ��������� ��������� ������������ ������, ��� ��������� ��������� ��������������� ������������ ������������ ��������� ��������� ��������� ������ ��������� ������������ ������ ��������� ��������� ��������� ��������������� ������������ ������������ ��� ���������.Soft polymer materials have simple manufacturing and tuning methods for integration with various nano/microstructures for functional and controlled surface adhesion. Micro-scale structures have mechanical interaction property between the surface and the liquid, while nano-scale structures can modify the surface adhesion. The purpose of this study is to design unique nano/microstructures and integrate functional hierarchical structures on polymeric materials. Three different engineered hierarchical polymeric designs are introduced to improve the mechanical interaction characteristics with the controlled surface adhesion over liquid phase materials.
First, ratchet-like polymer hierarchical structures are fabricated by simple molding process to enable directional roll-off of droplets. Micro-scale ratchet-like structures for generating directional moving force are optimally designed to maximize the directional moving force, and nano-scale dimple structures are integrated on micro-scale ratchet-like structures for rolling-off droplets. Droplets with diverse surface energies are shown to roll-off directionally by minimized external forces, and two-dimensional droplet control is also possible on curved tracks, such as U- and S-shapes.
Second, porous polymer hierarchical structures are fabricated by etching and coating method to improve the floating performance on water. The microporous structures are fabricated by high-temperature and high-pressure steam etching in vessel during the cross-linking of polymers. After the formation of microporous polymer structures, the superhydrophobic nanoparticles are coated for the low adhesive surface. The superhydrophobic hierarchically structured polymer buoys have very low adhesion with water and contain more air pockets for enhanced floating to support the heavier forces on it. The critical immersion depth and weight are demonstrated to verify the improvement of superbuoyancy.
Third, hierarchical silicon needles integrated onto polymer thin film is fabricated to improve the adhesion of liquid on silicon needles and conformal contact on curved shapes with flexible thin film. The hierarchical silicon needles are fabricated by conventional anisotropic dry etching for micro-scale height and metal-assisted chemical etching for nano-scale texturing on the surface. Then, a novel polymer swelling method for transferring hierarchical silicon needle arrays onto the flexible polymer thin film is developed. The well-organized silicon hierarchical needle arrays with high aspect ratio embedded onto polymer thin film not only contain more liquid-based transfer materials but also enable conformal contact on the rounded surface from cell-level to tissue-level structures for efficient interaction.
In conclusion, three different engineered designs of hierarchical structures are integrated with soft polymer materials for controlled surface adhesions and functional mechanical interactions of liquid-phase.Docto
������������������ ������������ ������������ ��������� ������ ��������������� ��������� ��������� ������ ������ ������
������ ������ ������������ ��������� ������ ������ ������ ��������� ������ ������ ��������� ������������.
������ ������������ ��������������� ������, ���������, ��������� ������������ ��������� ��������� ��������� ��������� ��� ��� ��������� ��������� ������������.
��������������� ������������ ��������� ������������ ��������� ������������ ��������� ��������� ������������ ��������� ��������� Slave ��������� ��������� ������������.
��������� ��������� ������������ ������������ ������������ ������������ ��������� ��������������� slave��� ��������� ������������ Position Control��� ������������.
Position Control��� ������������ ������ ������������ ������������ ��������� ��������������� ��������� ������. ��� ������ Slave��� ��������� ������������ ��������������� ������������ ��������� ������������������.
��������� ��������������� ������ ������ ������ Robot ��������� ������ ��������� ��������������� ������������ ������������ Singularity��� ������ ������������ ��� ���������.
��������� ��������� ��������� ������������ ��������������� ������������ ��������� ������ ������������.
��� ��������� ������������ ������ ��������������� ��������� ��������� Rate control ��� ������.
��������� Rate control��� ��������� ��������� Master��� ������������ ��������������� ��������� ��������� ��������� ������ ��������� ������.
��� ��������������� position control ��� rate control��� ������������ ������������ hybrid control��� ������������ ��������� workspace ��� ������ ������������ ��������� ������������ ��������� ������ ������ ������������.
��������� ��������� ������������ ��������������� ������ ������ Master��� ������������, End-effecot��� ������ ��� ������������ ��� Position Control��� ������������, End-effector��� ������ ��� ������������ ��� Rate Control��� ������������.
��������� ��������� ��������� master��� 7DOF(Degree of Freedom)��� ������ Manipulator������.
Slave��� master ��� ������ 7DOF��� ������������ DOF��� ��������� ��������� ������ 7DOF manipulator��� ������ ��������������� V-rep������ ���������������.
������������������ ��������� ��������� ������������ ��������� ���������. ������ ��������� ������ ��������� ��������� ������ ��������� ��������� ���������������.Recently, teleoperation robots for work in extreme environments are becoming a lot of research. Teleoperation is a technology that enables people to work with a sense by using machines, systems and robots from a long distance.
In order for the robot to follow the behavior of the user at a distance, the user implements the motion of the exoskeleton robot, and the slave robot imitates the motion.
Systems using exoskeleton robots as masters use position controls where the displacement of the master directly determines the displacement of the slave.
To use position control, the teleoperation system should have a similar workspace. In this case, problems arise if the size of the slave is increased or the work space is widened.
If the system does not have a similar work space, it may not be able to utilize the given workspace for robot manipulation or malfunction due to singularity.
Workspace mapping is very important because it is directly related to human safety.
In order to overcome this problem, there is rate control which is easy to expand workspace.
However, rate control is a system using an exoskeleton robot as a master, and it is difficult to control precisely.
The purpose of this paper is to utilize all of the given workspace and to intuitively control it by using hybrid control which is a mixture of position control and rate control.
In a system using an exoskeleton robot, a virtual circle is created in workspace of the master, position control is performed when end-effector is located within the virtual circle, and rate control is performed when end-effector is located outside the virtual circle.
The master used for the experiment is a Manipulator with 7DOF (Degree of Freedom).
The slave has the same 7 DOF as the master but the DOF arrangement is different. And the large 7 DOF manipulator is implemented on the V-rep simulator.
Experiments was performed that simple mission in a virtual environment.
The results of the experiment are compared with result of other control method.Maste
A Study of Italian Vocal Technique in Eighteenth century: Focusing on Tosi and Mancini's Treatises
������������������ ���������(Giambattista Mancini, 1714���1800)��� ������������������ ������ ��������� ���������(Pensieri e riflessioni pratiche sopra il canto figurato, Practical Reflections on the Figurative Art of Singing, 1774, ������ ���������)��� ������(Pier Francesco Tosi, 1653���1732)��� ������������ ��������� ��������� ������ ���������(Opinioni de' cantori antichi, e moderni, Observations on the Florid Song, 1723)��� 18������ ������������ ������ ������ ��������� ������ ��������� ��������� ������������. ��� ��������� ������ 18������ ������������ ������ ������ ��������� ������������ ��������� ��������� ������ ������ ��������� ��������� ���������, ��������� 18������ ������ ��������� ������ ��������� ������ ��� ��������� ������������ ������ ������ ������ ��� ��� ������. ��� ��������������� ��� ��������� ��������� ��������� ������������(Geminiano Giacomelli, 1692���1740)��� ��������� (La Merope) ��� ������������(Epitide)��� ��������� ��������� ��������� ���������������������(Quell���usginuolo)��� ������������, ������ ������ ������������(Sposa, non mi conosci) ��� ������ ������������ ������������������ ��������� ������ ������ ��������� ������ ��������� ������������ ������.Docto
Beam profile tailoring and efficient frequency conversion of high power solid state lasers
��������� ������������ ���������, ������, ������ ��� ������ ������ ��� ��������� ������������ ��������� ��������� ���������, ��������� ��������������� ������ ��������� ������, ������, ������������ ��������� ������ ��������� ������ ��� ��������� ������ ������ ������ ��� ��������� ��� ��������� ��������� ������ ������. ��� ��������� ��������������������� ������������ ��������� ��������� ��������� ��������������� ��������� ������ ��������������������� ��������� ��� ��������� ������ ��������������� ������������ ������������������ ������������-������������(Hermite-Gaussian, HG) ��������� ���������-������������(Laguerre-Gaussian, LG) ��������� ������. ������������������ ������ ��������� ��� ��������� ������������������ ������ ��� ��������� ��������� ������ ��������� ��������� ��������������� ��������� ��� ��������� ������������ ��������� ������������ ������������ ��������������� TEM00 ��������� ��������������� ������ ���������������. ��������� ��������������� ��������� ���������-������������ ��������� ������������ ��������� ��������� ��������� ������ ��� ������ ������ ��������� HG ������ ������ ������������ ������ ��������� ��� ������ ��������� ��������� ��������� ������ ��������� ������ ��������� ������ ������ ��������� ��������� ������, ���������/��������� ������ ��� HG ������ ������ ������ ��� ������ ������ ��������� ������ ��� ���������, ������ ������ ��������� ��������������� ������������ ������������ ��������� ������ ������ ��������� ������ ��� ������. ������ ������������ ������������ ������������ ��������� LG ������ ��������������� ������ ������������������(orbital angular momentum)��� ��������� ������ ��� ������������ ��������������� ��������� ������ ��������� LGpl ������ ��� ��������� ��������� ��������� ��������� ������������ ������������ ������������ ��� ������ ��������� ������������ ������ ��� ��������������������� ������ ��� ������. ������ ������������ ������������ ������ ������ ������ ���������, ������ ���������, ������/��������� ������ ��� ���������, ������ ��������� ������ ������ ��� ��������� ��������� ������ ������������ ��������� ������ ������������ ������ ��������� ������ ��������������� ������, ��� ������ ������ ��������� ������ ��������� ������������ ��������� ������ ��������������� ������ ������������ ��������� ������ ������������ ������������ ������. ��������� ��������� ��������������� ��� ��������������� ������ ��������� ��������������� ��������� ������, ������������ ������������ ��� ��������� ������ ������������ ��������������� ���������. ��� ��������������� ��� ������ ������������ ��������� ��������� ��������� ������ ��������� ������������ ������������ ������������ ��������� ��������� ��������������������� ���������, ������������ TEM00, LG ������������ ��������� ��������� ��� ��������������� ��������� ������ ������ ��� ��������� ������ ������������ ������������ ������. ������ ��������� ��������� LG ������ ������ ������������ ������ ��� ��� ��� ��������� ������ ��������� ������������ ������ ������ ��������� ��� ��������� ������������������, ��������� ������������ ������������ ������������ ������������ ������������ ������ ������������ ��������� ������ ��������� ��������� ������������ ������ ��� ��������� ������������ ���������������.
��������� ��������� ������ ������������ ������, ���������, ������ ������ ������ ������ ������������ ������������ ������. ������ ��������� ��������� ��������� ��������� ������ ������������ ������ ������ ������, ������ ������, ������, ��������� ��� ��������� ������ ������������ ������������������ ������. ��������� ��������� ��������� ��������� ������ ������������ ��������� ������������ ��������� ������ ��������� ������ ��������� ������������ ��������������� ������ ��������� ������ ������������ ��������� ��������� ���������, ��������� ������������ ������ ������ ������������ ������ ������������ ������ ��������� ��������� ns ������ ��������� ��������������� ������������ ��������� ������������ ������ ��������� ��� ��������� ��������� ������ ��������� ������������ ������ ��������������� ������. ��� ������������ ��������� ��������� ������������ ��������� ��������� ������������ ������ ������-������(walk-off) ������ ��������� ������ ��������� ��������� ��������������� ��������� ������ ������������ ������ ������ ��������� ���������, ������ ��������� ������ ������ ��������� ������������ ��������� ������ ��������� ������ ������ ������������. ������������ ��������� ������������ ������������ ��������������� ������ ������ ������������ ������������ ��������� ������ ���, ������ ��� ������ ��������� ������ ������ ������ ��������������� ������ ��������� ��������� ������ ������ ��������� ��������� ������������. ��� ��������������� ��������� ������������ ��������� ��������� ������ ������ LBO��� BBO ��������� SHG ��������� ��������������� ������������������, ��������� ��������� ������ ������������ SHG��� ��������� ��������� ��������� ������ ������ ��������� ������������ ������ ��� ��� ��������� ���������������. ��������� ��������� ������������ ������-������ Yb:KGW ��������� ������ ������������ 2��� ������������ ������������������, ������ ������ ��� ������ ��������������� ������ ������ ������ ��� ������ ������ ��������� ������������ ������������ ������������ ��������� ������������ ������ ��������� ������ ��������������� ������.This thesis presents the study of beam profile tailoring and efficient frequency conversion of high power solid state lasers including the theoretical calculation and the experimental results.
Laser beams are used in a great number of application areas such as industry, medicine, defence, telecommunication, and so on. Each area requires unique beam properties, e.g. the spatial intensity distribution, laser frequency, etc., depending on its application. Especially, the spatial intensity distribution of the laser beam, which is determined by a transverse mode in an optical resonator, is one of the most important characteristics for lasers. There are two kinds of transverse laser resonator modes, a Hermite-Gaussian (HG) mode in a rectangular configuration and a Laguerre-Gaussian (LG) mode in a cylindrical configuration. Recently the LG mode laser beam attracts lots of interests for many application in areas such as optical tweezer and manipulation of particles, high capacity telecommunication, precise laser material processing, and so on.
First, this thesis reports study the characteristics of the LG mode output, including the intensity profile and the wavefront helicity. I have demonstrated generation of the LG mode optical vortex beam with well-determined handedness simply by inserting and tilting an etalon in the laser resonator and propose the selection mechanism of the wavefront helicity based on the theoretical and experimental results. Moreover this thesis proposes a simple and alternative way for controlling the transverse mode in a solid state laser employing a dual-cavity laser resonator configuration, which is invented and demonstrated for the first time in the world by this research activity. Using this approach, I have not only selected and switched a resonating mode in a simple way but also generated the laser beam with a targeted intensity profile by controlling the ratio of two resonating modes.
Second, this thesis includes the study of high-power femtosecond pulsed lasers and its frequency conversion. Femtosecond pulsed lasers systems are attractive for a lot of application areas such as industry, spectroscopy, medicine and so on. Femtosecond laser beams in the visible wavelength region can be obtained by frequency conversion of Nd-doped or Yb-doped IR laser beams using a nonlinear optical crystal. In this thesis, efficient second harmonic generation (SHG) of a Yb:KGW laser with the femtosecond pulsed output is reported. Using LBO and BBO crystals as nonlinear optical crystals, I have numerically calculated SHG conversion of the femtosecond laser beam under the various conditions. The numerical calculation is applied to a mode-locked Yb:KGW femtosecond laser constructed in house, which is in a very good agreement with experimental results.Docto
Dietary glycemic index, glycemic load, carbohydrates and the incidence risk of type 2 diabetes in adults ��� 40 years old
[������������ ��� ������]
������������ ������������ ������������ ������������, ������, ������������ ������ ��������� ������������ ������ ������������. ������ ��������� ��� ��������������� ��������� ��������� ��������� ��������� ��������� ������ ������ ������������. ������������ (Glycemic index), ������������������ (Glycemic load)��� ������ ��� ��������������� ������ ��������� ������������ ������ ��������� ������������, ������ ��������� ��������������� ������ ��������� ������������ ��������������� ������������ ��������� ������������ ���������, ��������� ��������������� ������������ ���������������. ���������, ��������������� ��������� ������ ��������������������� ��������������� ������������ ������������ ��������������� ��������� ��������������� ��������� ��������������� ��������� ������ ��������� ��������� ��������������� ���������, ��������������� ������������ ��� ��������� ��������� ��������� ������������. ���������, ��� ��������� ������������������ ��������� ��������� ��������� ������ ��� ������, ������, ������ ��� ��������� ��������� ��������� ������������ ������������ 40��� ������ ������ ������ ��������� ������������, ������������������, ��� ��������������� ��������� ��������� ��������� ������������ ��������������� ������������, ��� ������������ ������������������ ��������� ������������ ������ ��������������� ���������������.
[������������]
2005������ 2011��� ��������� ��������������� ��������� ��������� ��� ��������������� ��� ��� ������������ ������ ��� 8,269������ ������������������ ��������� ��������� ������������ ���������������. ������ ��������� ������������������������������ ���������������, ��������� ������������������ Poisson ������ ��������� ������������ ��������������� ���������������. ��������������� ��������������� ��������� ������ ���������, ��� ������ ������������������������ ��������� ��������� ������ ������������, ������������������, ��� ��������������� 3������������ ������ ���������������.
[������������]
6.2 ������ ������������ ������, 531������ ��������� ��������� ���������������. ������ ������������ ������, ������������, ��������������� ���������, ������, ��������� ������, ������������ ��� ��������������� ��������� ������, ��������� ��������������� ��������������������� ������ ������ ������ ������ ��������� ��������� ������������������ ������ 68%, 49% ������������ ��������� ��������� (IRR= 1.68, 95% CI= 1.05-2.70 in the highest (T3) vs. the lowest (T1) for GI, p trend= 0.0367 in the average consumptionIRR= 1.49, 95% CI= 1.01-2.18 in T3 vs. T1 for GL, p trend= 0.0067 in the baseline consumption). ��������� ��� ������������ ��������� ��������� ������������ ���������. ������ ������������ ��������� ������, ������������, ������ ������������������, HOMA-IR��� ��� ��������� ��������� ������ ��������� ������, ��������� ��������� 23 (kg/m2)������, ��������������� 90 (cm)������, HOMA-IR 1.00 ��������� ���������, ������ ��������������� ��������������������� ������ ��������������� ��������� ��������� (IRR= 1.86, 95% CI: 1.09-3.15, p trend= 0.0245 of BMI ��� 23IRR= 2.22, 95% CI: 1.17-4.22, p trend= 0.0156 of WC ��� 90IRR= 2.91, 95% CI: 1.06-8.01, p trend= 0.0344 of HOMA-IR ���1.00 for GI). ������, ��������������� ��������� ������������ ��������� ���������.
[������]
��� ��������� ������������ 40��� ������ ��������������� ��������������� ��������� ��������� ������������ ������������ ��������� ������������ ��������� ���������, ������ ��������������� ��������������������� ��������� ��������� ��������������� ���������������, ������ ��������� ������ ��������������� ��� ������ ��������� ��� ��������� ���������������. ���������, ��������������� ������ ������������ ������������ ��������� ��� ��� ��������� ������ ��������� ��������� ������ ��������������� ������ ������ ������������ ��������� ������������ ������ ��������� ��������� ��������� ��� ��������� ���������.[Background]
Diabetes is a condition of impaired glucose metabolic, thus it is reasonable to ask whether dietary carbohydrates (CHOs) and its quality and/or quantity may influence the course of diabetes development. The glycemic index (GI) and glycemic load (GL) -the quality index of carbohydrates of food stuffs- have been considerably investigated linking with diabetes incidence most in Western population. However, although the staple food of Asian population is rice and those GL are relatively high comparing to Western population, those findings were inconsistent and rare in Asian population.
[Objectives]
In this prospective study, we investigated the association GI, GL and CHOs with the risk for developing type 2 diabetes (T2D), and the influence of insulin resistance on the associations from Multi-Rural Communities Cohort (MRCohort)_Yangpyeong and Namwon, a part of the Korean Genome Epidemiology Study (KoGES).
[Method]
A total of 8,269 (3,010 men and 5,259 women) participants who are recruited between 2005 and 2011 and did not have diabetes in the baseline survey were included in the final analysis. Dietary GI, GL, and CHOs were assessed by using a validated food frequency questionnaire. The association between GI, GL, CHOs and incident risk of T2D was evaluated by a modified Poisson regression model with a robust error estimator controlling for potential confounders. Two methods were used for dietary assessment, one is the baseline consumption and the other is the cumulative average consumption.
[Result]
The incident cases of T2D were observed in 531 (210 in men, 321 in women) subject during the follow-up period (median, 6.2 years). After adjustment for age, education level, smoking status, alcohol consumption, physical activity, body mass index (BMI)/waist circumference (WC), and dietary factors, higher GI and GL was associated with increased risk of diabetes among men (IRR= 1.68, 95% CI= 1.05-2.70 in the highest (T3) vs. the lowest (T1) for GI, p trend= 0.0367 in the average consumptionIRR= 1.49, 95% CI= 1.01-2.18 in T3 vs. T1 for GL, p trend= 0.0067 in the baseline consumption), but not CHOs intake. After the stratification by BMI, WC, fasting blood glucose, HOMA-IR, the influence of GI on the T2D incidence was more risky in higher BMI (���23 kg/m2) , higher WC (��� 90 cm), lower HOMA-IR group (<1.00). However, there was no association between GI, GL, and CHOs, and the risk of T2D among women.
[Conclusion]
These findings support that high GI and high GL are associated with the risk of diabetes among men and the influence of GI was more prominent on overweight and obese men. Thus, as considering the trend of increasing prevalence of obesity in Koreans, overweight or obese men may need to choose more carefully their habitual diet, considering quality and quantity of carbohydrates.Maste
Clinical response according to treatment modalities in rosacea patients
Background: Recently, a combination of therapeutic modalities has been used to treat rosacea. Oral therapy with minocycline or isotretinoin is effective in the initial control of rosacea, and intense pulsed light (IPL) is a useful alternative laser therapy for rosacea. However, no comparative studies have investigated minocycline monotherapy or the combination of isotretinoin either with or without IPL
Objective: We aimed to investigate the clinical efficacies of minocycline alone compared to the consecutive therapy of isotretinoin with or without IPL for the treatment of rosacea.
Methods: Sixty-six patients were included in this study. Every patient applied topical 0.75% metronidazole twice a day. The patients were classified into the following three groups: minocycline alone for 6 months (Group 1, n=23), the consecutive isotretinoin of 3 months after minocycline alone for the first 3 months (Group 2, n=21), and 3 months of minocycline and consecutive 3 months of isotretinoin with adjuvant IPL (Group 3, n=22). In Group 3, total 4 sessions of IPL treatments were administered to the face every three weeks for 3 months during taking isotretinoin. Two independent physicians determined the clinical efficacy using a scale from 0���3 to evaluate the severity of erythema and telangiectasiathey also counted the number of inflammatory lesions (papules and pustules) at every visit until the completion of six months of treatment.
Results: An improvement in the inflammatory lesions was evident in every group. In the Group 3 showed greater improvement in their inflammatory lesion count and erythema than Group 1 and Group 2 (p<0.001 and p=0.012, respectively).
Conclusions: Oral therapy and IPL were both effective for the treatment of rosacea. The combination of oral minocycline and isotretinoin markedly decreased the inflammation of lesions, although IPL was more effective in improving the erythema and inflammatory lesions.Maste
Proliferation of prostatic stromal cells infected with Trichomonas vaginalis via crosstalk with mast cell tryptase
������������ (Trichomonas vaginalis)��� ��������� ������������ ������������ ������ ������ ��������������� ������������, ������������������������ ��� ������������ ��������� ������������ ������������ ������������. ��������������������������� ��������������� ������������ ��������� ��������������� ��������� ��������� ��������� ��������� ������. ��������� ������������ ������������������ ������������������������ ��������������� ��� ������������������ crosstalk��� ������ ������������������������ ������ ������ ������ ������ ��� ������. Tryptase��� ��������������� ������������������ ��� ������������ ���������, ������ protease-activated receptor 2 (PAR2)��� ��������������� ��������������� ��������� ������������ ��������� ��������� ������. ��������� ��������������������� ������������ tryptase��� ��������� ��������� ��������� ������ ������. ��� ��������������� ������������������ ��������� ������������������������ ������������ tryptase��� crosstalk��� ������������������������ ��������� ��������������� ���������������, ������������������������ ��������������� ������������ ������ conditioned medium��� ��������������� ���������������, ��������� tryptase��� tryptase-PAR2 ��������� ��������� ������������������������ ��������� ��������������� ������������ ��������� ������ ��������� ���������.
1. ������������ ������������������ ������������ ���������������������(WPMY-1)��� CXCL8��� CCL2 ��������� ���������������. ������ chemokine��� ������������������ ��������������������� ���������(Trichomonad-conditioned medium, TCM)��� ��������������� ��������� ���������������.
2. ��������������� TCM������ ��������������� ��� ��-hexosaminidase, CXCL8 ��� tryptase��� ��������� ���������������.
3. ��������������� TCM��� ������������ ���������(mast cell-TCM, M-TCM)��� ������������������������ ������������ ��� ������������������������ ��������� ��������������� ��� M-TCM ������������ ������������ ������������ ������������ ��������� ������������ ���������������.
4. M-TCM��� ������ ��������� ��������� ��������������������������� tryptase-PAR2 pathway��� ��������������������� ��������� ��������������� ������������������������ M-TCM��� ������������������ PAR2, p-ERK, COX-2, 15d-PGJ ��� PPAR����� ������ ������ ��������� ���������������. ������ M-TCM��� ������ ��� ��������������� ������������ ��������������� ��������������� ��� ��������������� ��������� ������������ ������������ tryptase-PAR2 pathway��� ��������� ������������ ��� ��� ���������.
5. M-TCM��� ������ ������������������������ ��������� tryptase-PAR2 pathway��� ������������ ��������� ������������ ��������� M-TCM��� tryptase��� PAR2 ������������ ��������������� ��������� ��� p-ERK��� ��������� ������������ ERK��� PAR2��� ������ ������������������ ���������������. ERK��������� ��������� COX-2��� ������������������ COX-2 ������������ p-ERK ��������� ��������� ������ ��������� ERK��� COX-2������ ������ ������������������ ���������������. ERK��� COX-2 ������������ M-TCM��� ��������������� ��� 15d-PGJ ��������� PPAR�� ��������� ��������������� 15d-PGJ��� PPAR����� PAR2, ERK, COX-2������ ��������� ������������ ������������ ��� ��� ���������.
��������� ��������� ������������ ������������������ ��������� ������������������������ chemokine��� ������������ ��������������� ���������������, ������������ ������������������ ��������� tryptase��� tryptase-PAR2 pathway��� ��������� ������������������������ ��������� ������������ ��� ��� ���������.Docto
Sensitivity Analysis of Operating Conditions on the Economics of CO2 Storage with EOR
This study proposes economic evaluation of CO2 geological storage with enhanced oil recovery (CCS-EOR). The procedures were established by considering capital expenditures (CAPEX) and operating costs (OPEX) of infrastructures and revenues from oil recovery and carbon tax credit. Extensive CCS-EOR simulations were conducted to draw the best promising scenario among cases where miscibilities were controlled by producer bottomhole pressure (BHP) and liquefied petroleum gas (LPG) addition. Due to the lowest producer BHP in immiscible condition, earlier oil recovery and CO2 breakthrough, which result in low amount of CO2 sequestration, occurred. Miscible condition has found to be economically the most promising scenario with net present value (NPV) of 87 MM and 82 MM. Sensitivity studies on economic parameters were conducted on pressure-controlled miscibility adjustment cases. When discount rate changes from 2.3% to 10%, immiscible condition became more favorable due to more oil production at earlier stage. However, miscible condition showed the highest NPV for oil price ranging from 100/bbl.Maste