4272 research outputs found
Sort by
Pengaruh Struktur Modal, Profitabilitas, dan Kebijakan Dividen terhadap Nilai Perusahaan (Studi pada Perusahaan Farmasi yang Terdaftar di Bursa Efek Indonesia Periode 2018 – 2022)
No full textThis research aims to analyze and provide empirical evidence of the influence of capital structure, profitability and dividend policy on company value in pharmaceutical companies listed on the Indonesian Stock Exchange for the 2018-2022 period. This analysis uses the independent variables capital structure (DER), profitability (ROE), and dividend policy (DPR) as well as the dependent variable which is proxied by Price to Book Value (PBV). This research uses secondary data originating from the financial reports of pharmaceutical companies listed on the Indonesia Stock Exchange (BEI) in 2018-2022. The sample selection used a purposive sampling method and the number of samples used was 6 pharmaceutical companies. The statistical method uses Multiple Linear Regression analysis with hypothesis testing, the t statistical test and the F test. The results of this research show that the capital structure variable (DER) has an effect on company value. This shows that higher debt will increase debt interest, thereby affecting share prices and increasing company value. Profitability as measured by ROE has no effect on company value, meaning that this research does not provide empirical evidence that if profitability increases, company value will also increase, in other words the results of this research contradict existing theory. Dividend policy (DPR) has no effect on company value. This means that the level of dividends distributed to shareholders is not related to the level of company value
Pengaruh Likuiditas, Profitabilitas, dan Leverage Terhadap Financial Distress pada Perusahaan Properti dan Real Estate Yang Terdaftar di Bursa Efek Indonesia Periode 2020-2022
No full textThis study aims to determine and analyze the effect of liquidity (CR), profitability (ROA), and leverage (DAR) on financial distress in Property and Real Estate Companies Listed on the Indonesia Stock Exchange for the 2020-2022 period. This type of research is quantitative research using secondary data. The sampling technique in this study is Purposive Sampling. That is, the company used as a sample must meet the criteria that have been determined. Thus, from 84 company populations to 23 companies that meet the sample criteria. The data analysis techniques used are descriptive statistical tests, classical assumption tests, multiple linear regression analysis, hypothesis tests (F statistical test and T statistical test), determination coefficient analysis. This research was also assisted through SPSS Version 25 and Microsoft Excel applications. The results of this study show that partially the variables liquidity (CR), profitability (ROA) have a positive and significant effect on financial distress, and the variable leverage (DAR) has a negative and significant effect on financial distress. Meanwhile, simultaneously the variables of liquidity (CR), profitability (ROA), and leverage (DAR) have a significant influence on financial distress in Property and Real Estate Companies Listed on the IDX for the 2020-2022 period
Pengaruh Selebgram Endorsement dan Harga melalui Brand Image terhadap Keputusan Pembelian Skincare Glad To Glow di Media Sosial Instagram
Get PDFThis research aims to analyze the influence of celebrity endorsements and price through brand image on purchasing decisions for Glad To Glow skincare on Instagram social media. The method used is quantitative with data obtained from the results of distributing questionnaires to Glad To Glow skincare users in Malang City. The type of data is primary data obtained from 96 respondents by collecting respondent information for 10 days. Inner model path analysis was used to evaluate the relationship between variables. The research results show that Celebrity Endorsement and Price have a significant influence on the formation of Brand Image with path coefficient values of 0.306 and 0.574, with p-values of 0.002 and 0.000). Brand Image is also proven to have a significant influence on Purchasing Decisions with a path coefficient of 0.703, p-value 0.000). This research supports field findings which show that brand image plays a key role in mediating celebrity endorsement and price on purchasing decisions
Analisis Kepuasan Pengguna Pada Website Siapel Dalam Pelayanan KTP Elektronik Dinas Kependudukan Pencatatan Sipil Kota Malang Menggunakan Metode E-Govqual
Get PDFThe implementation of e-government as an innovation in public administration using information technology prompted the Malang City government to launch the SIAPEL website, offering various public services, including electronic ID card (E-KTP) services. Despite facing challenges, such as the absence of formal research on user satisfaction, there is a critical need to evaluate the satisfaction level of E-KTP service users on the SIAPEL website. This study employs the e-govqual method, focusing on dimensions like ease of use, trust, reliability, and citizen support. The research findings indicate that all questionnaire items are valid, normally distributed, and reliable based on validity, normality, and reliability tests. The t-test identifies three significant variables influencing user satisfaction: ease of use, trust, and reliability. Furthermore, through multiple linear regressions and f- tests, it is evident that all variables significantly and positively affect user satisfaction. Overall, the e-govqual method effectively evaluates user satisfaction levels, affirming that all studied variables play a crucial role in determining user satisfaction
Pengaruh Perkuatan Pengekangan Eksternal pada Balok Beton Bertulang yang Sudah Dibebani Menggunakan Glass Fiber Reinforced Polymer (GFRP) terhadap Kuat Momen Lentur
Get PDFConcrete has a weakness, namely that it is not strong enough to withstand tensile forces, so the concrete can crack, break or crumble, so concrete repairsare needed using strengthening methods to overcome the damage. The strengthening method used is external restraint using Glass Fiber Reinforced Polymer (GFRP). The aim of the research is to determine the effect of strengthening external restraints on reinforced concrete beams that have been loaded using glass fiber reinforced polymer (GFRP) on bending moment strength.
The research consisted of testing the bending moment strength of corroded reinforced concrete beams. The test object is in the form of a block measuring 15x 15 x 60 cm with concrete quality fc 22.27 Mpa. Using GFRP Spacing Variations of O cm, 5 cm, 10 cm and GFRP Width of 5 cm, 7 cm, 9 cm. Bending moment strength testing is based on ASTM C28/C28M regarding standard test method for flexural strength of concrete (using simple beam with third-pointloading).
The results of the research are that strengthening external restraints using GFRP can increase the bending moment strength with the largest bending moment strength at O cm GFRP spacing variations of 5.10 kNm and at 9 cmGFRP width variations at 5. 60 kNm. Meanwhile, the spacing variations of 5 cm,JO cm and width variations of 5 cm, 7 cm are respectively 5.23 kNm, 4.67 kNmand 4.63 kNm, 4.90 kNm
Pengaruh Bentuk Bracing Konsetris terhadap Rasio Partisipasi Massa, Periode Getaran, Gaya Gempa Dasar, dan Simpang antara Lantai pada Steel Frame Tube Tahan Gempa dengan Analisa Respon Spektrum
Get PDFStructural planning in the construction of high-rise buildings has a high riskof earthquakes. Steel frame tube structures with the addition of concentric bracing to increase resistance to lateral forces, increase structural stability and reduceshear lag effects.
The modeled structure is a 20-story steel frame tube building structure with various forms of concentric bracing. There are 4 variations namely X Concentric Bracing System Shape Model, D Concentric Bracing System Shape Model, VConcentric Bracing System Shape Model, and Inverted V Concentric Bracing System Shape Model. Earthquake force analysis using response spectrum analysis with 3D modeling using SAP 2000.
The analysis results show that the recommended model is the Concentric Bracing System Shape Model D. Because it dominantly meets the requirements by having a vibration period value of 1.066 seconds, the value of the basic earthquake force in the X direction of 4932.22 kN and in the Y direction of 4734.242 kN, and the value of the intersection between floors in the X direction of 15.193 mm and inthe Y direction of 16.37 mm
Analisa Pekerjaan Galian Timbunan Pemadatan Base Course Lapisan Tanah dan Estimasi Biaya Proyek Jalan Lintas Selatan Lot 7 Tambak Rejo-Serang, Blitar
Get PDFThe Southern Cross Line (SCL) is a project located in Blitar district which aims to connect Tambakrejo beach with Serang beach with a travel time that is usually 2-3hours, now it is less than 30 minutes.
The implementation of the work to build the southern traffic lane is dominated by heavy equipment with rocky and muddy soil characteristics and needs to be trimmed along 12 km. So the selection and determination of heavy equipment must be considered in order to operate effectively.
This study uses the theory of heavy equipment productivity, determining the type and number of tools according to the terrain, the type of soil to be excavated, and the compacted. The amount of heavy equipment used will determine the optimalwork time. Heavy equipment working hours use normal hours, which is 8hours/day, the calculation method is used by trial and error, from this method, the calculation of heavy equipment production by taking calculations alternative/assumption. The results of the alternative calculation/assumption were obtained as many as 7 units of Pc 300 excavators, 15 units of bulldozers, 3 units ofroller vibrators, and 22 units of dump trucks with a work time of 27 days or with 216 hours along 12 km, so that the work is faster than the work in the field. The total calculation of the stockpile from sta 0+000 to sta 2+000 obtained a total volume of43435.3776 m3. The total calculation of excavations from 0+000 to sta 2+000 obtained a volume of 24932.82285 m3. The estimated cost of excavation of the landfill is Rp. 9,384,446,102.67
Analisis Distribusi Aliran pada Pipa Distribusi Sistem Irigasi Tetes (Studi Kasus: Kampung Glintung Water Street (GWS) RW 05 Kelurahan Purwantoro, Kecamatan Blimbing, Kota Malang)
Get PDFIn an attempt to maintain the continuity of food production, Glintung Water Street (GWS) applied a drip irrigation system on melon plants. Drip irrigation system isa way of distributing water from the main pipe through emitters that are distributed through the flow in the piping network. The water requirement of melon plants fordrip irrigation is about 1-2 liters/day per plant. Therefore, the purpose of this studyis to analyze the flow distribution in the pipe to 15 drip irrigation points in achieving the desired flow rate, which is 30 liters per day. The research used an experimental quantitative method, with data obtained including flow velocity, irrigation flow discharge data, and droplet uniformity. The results showed that the flow distribution in the pipes to 15 drip irrigation points met the desired flow discharge, which is 30 liters per day in the Glintung Water Street (GWS) village. However, the distribution of flow discharge at each irrigation point is different. In addition, the uniformity of water distribution shows differences in the uniformity criteria of each irrigation point, with an average uniformity of 91.78%
Kualitas Layanan Elektronik dan Pengaruhnya Terhadap Kepuasan Serta Loyalitas Pengguna Brimo Melalui Model Eservice Quality (Studi Kasus Pada Mahasiswa Universitas Merdeka Malang)
Get PDFThis study aims to evaluate the quality of service offered by BRIMO, a digital banking application provided by Bank Rakyat Indonesia (BRI), and its impact on user satisfaction and loyalty levels. Using the Servqual method, this research collected data from 100 students of Universitas Merdeka Malang (UNMER), who were sampled in this study. The Servqual method is used because it is able to measure five main dimensions of service quality: tangibles, reliability, responsiveness, assurance, and empathy. The results of this study show that all of these dimensions have a significant influence on BRIMO user satisfaction and loyalty. Tangible, such as the appearance of the application interface and system speed, as well as other technical factors such as the stability of the internet connection, were found to be factors that largely determine user satisfaction. On the other hand, the responsiveness and ability of the application to respond to user needs, both in terms of service and data processing, also plays an important role. In addition, this study highlights the importance of effective communication and attention provided by BRIMO staff, which is able to increase users' sense of security and comfort. Users who feel that their personal data is well protected tend to have a higher level of loyalty towards this application. This research emphasizes that to maintain user satisfaction and loyalty, BRI needs to continuously improve the quality of services offered through BRIMO. This includes continuous improvement in technical and non-technical aspects, such as enhancing the application's physical features, response speed, as well as guaranteeing user data security
Perancangan UI/UX Layanan Jahit Pakaian Dengan Menggunakan Pendekatan Design Thinking di Kota Malang
Get PDFThe development of technology greatly affects the needs of life and the way people think, especially the development of technology software. This then makes the development of User Interface (UI) and User Experience (UX) need to be a concern. This research aims to design a prototype of a clothing sewing service application in Malang City and to provide information on clothing sewing services that can meet the needs of the community. Researchers use the Application of Design Thinking because it is able to produce more innovative and effective solutions in designing products or services and use the figma application to design prototypes. The testing process is carried out online using Maze Design as a test on interface design and System Usability Scale (SUS) which aims to measure user perceptions of interface usability. The test results using SUS (system usability scale) obtained an average value of 69.58. So it can be concluded that the prototype designed gets grade C, falls into the OK category for its nature (Adjective) and falls into the marginal category for its level of acceptance (Acceptable) and for the NPS value itself is classified as passive. The results obtained are still acceptable to users, but improvements are still needed to increase user satisfaction