28 research outputs found
FEMINISM IN NOVEL KEMBANG ALANG-ALANG BY MARGARETH WIDHY PRATIWI
No full textThis research has three purposes: 1) to describe the women figure life in the novel Kembang Alang-alang by Margareth Widhy Pratiwi, 2) to describe equal partnership figure of women with men in the novel Kembang Alang-alang by Margareth Widhy Pratiwi, 3) to describe the perspective of the author about women in the novel Kembang Alang-alang by Margareth Widhy Pratiwi.This was descriptive qualitative study which used the theory of feminist literary criticism which gave more priority to radical feminist literary criticism. Source of data used is novel Kembang Alang-alang by Margareth Widhy Pratiwi. The data in this research is a piece of the story. To collect data in this research is used reading and writing techniques. Data were analyzed by using the theory of radical feminist literary criticism. Validity is used semantic validity, while reliability is used intrarater reliability.The first research results are the women figure life in the novel Kembang Alang-alang by Margareth Widhy Pratiwi was described by two types of personality that is physical and psychological that explained on twenty three women figures, but not all types of that personality were explained on all of figures. The second results are discussed equal partnership figure of women with men in the novel Kembang Alang-alang by Margareth Widhy Pratiwi. The discussion produced three kinds of equal partnership between women with male figures. The three kinds there are women who are dominated by men, women are equal with men, and women dominated against men. That equal partnership is not all describe by the twenty three women figures. The third or the last results are the perspectif of the author about women in the novel Kembang Alang-alang by Margareth Widhy Pratiwi. There were twenty five perspectives of the author have found
Model Pemberdayaan Ekonomi Umat Melalui Aset Wakaf Masjid Besar Darul Muttaqin Kecamatan Alang Alang Lebar Palembang
No full textThis research aims to describe the model of economic empowerment of the people through the waqf assets of the Darul Muttaqin Grand Mosque. The research problem is to find out the description of the model, analysis and transformation of economic empowerment of the people through waqf assets at the Darul Muttaqin Grand Mosque, Alang Alang Lebar District. The research method the author uses is qualitative. Based on the results of the research and discussion, it is known that the description of the economic empowerment model for the people is a consumptive model and a productive model which is useful in assisting in poverty alleviation programs and leading to a prosperous society by empowering an independent community economy. Useful for increasing economic welfare, helping to increase community income, economic independence and reducing poverty, and for economic empowerment of the people based on sharia values in congregation, carried out based on cooperation and based on the spirit of helping each other in goodness, and can be transformed into the community or congregation appropriate and in accordance with Islamic law.Penelitian ini bertujuan mendiskripsikan model pemberdayaan ekonomi umat melalui aset wakaf Masjid Besar Darul Muttaqin. Permasalahan penelitian untuk mengetahui gambaran model, analisis dan Transformasi Pemberdayaan ekonomi umat melalui aset wakaf Masjid Besar Darul Muttaqin Kecamatan Alang alang Lebar. Metode penelitian yang di gunakan adalah penelitian kualitatif, Berdasarkan wawancara dengan bebrapa informan yakni: Hipmi Ramadhan ketua dewan Yayasan dan Lukman Hadi kabid usaha dan dagang. Hasil penelitian dan pembahasan diketahui bahwa gambaran model pemberdayaan ekonomi umat adalah model konsumtif dan model produktif yang berguna membantu dalam program pengentasan kemiskinan dan menuju masyarakat hidup sejahtera dengan memberdayakan ekonomi masyarakat yang mandiri. Bermanfaat untuk peningkatan kesejahteraan ekonomi, membantu meningkatkan pendapatan masyarakat, kemandirian ekonomi, dan mengurangi kemiskinan, dan untuk pemberdayaan ekonomi umat berdasarkan nilai-nilai syariah secara berjamaah, dijalankan berdasarkan kerja sama dan dilandasi semangat tolong menolong dalam kebaikan, serta dapat ditransformasikan kepada masyarakat atau jamaah yang tepat dan sesuai dengan syariat Islam
Rancang bangun rehal Al Qur’an untuk posisi duduk bersila
No full textRehal is a support or stand with a certain height and slope used to place the holy book of the Qur'an in order to provide comfort, clarity and convenience for people who use it when reading the Qur’an when sitting on their knees, cross-legged, sitting on a chair or when standing. The focus of this research will be to design a rehal for the use of a cross-legged sitting position on the floor. The concept of design refers to the development stage that has been carried out by several previous studies in the form of a new design concept, from environmentally friendly materials, height is more than the height of the belly button. The research method is carried out with the stages of literature study to set product boundaries, design, review designs, make product prototypes and test designed products. The results of the study were in the form of a rehal with a new design made of multiplex material coated with pvc sheet, height size 30 cm, has a slope of 45 ° position of the Qur'an when used. The results of the rehal test are able to support the Qur'an up to A4 size with a stable position and visibility when reading the top and bottom rows is only 4 cm apart, so rehal provide comfort when used, compared to Rehal in general, the difference in visibility between the top row and the bottom row reaches 20 cm. The slope of the Qur'an is generally a horizontal slope while the result of the design with a vertical slope so that it will feel better than before
Pembuatan Alat Potong Tulang Sapi untuk Peningkatan Kinerja Panitia Qurban di Masjid Miftahul Jannah Kelurahaan Berua Kota Makassar
No full textEvery 10th of Dhul-Hijjah Muslims around the world celebrate eid al-Adha or known as the feast of Qurban. Almost every mosque, especially urban areas, organizes slaughter of qurban animals, as well as in the Miftahul Jannah Mosque. Based on information obtained from partners that almost every year the number of cows is more than goats for slaughter. In addition to meat, beef bones are also a part that is distributed by partners to those who are entitled to receive especially the shohibul qurban. In the resent years the bones that are distributed are large pieces so that it is a concern for partners because the recipient expects the size of the bone received to be ready to be cooked because not all residents who have equipment to cut bones. Based on this condition, it is necessary to make a bone cutting machine that can cut bones quickly with a ready-to-cook size of 10-15 cm. Utilization of bone cutting tools was carried out on eid al-Adha 10 Dhul-Hijjah 1442 H, coinciding on July 20, 2021. The number of cows that are cut is 6. The results of the implementation of the machine show that the equipment is functioning in accordance with the expectations of the partner. Based on the results of four mitra members showed that the machine can be operated easily, can cut quickly with a cut size of 10 - 15 cm, and is safe to use. After cutting 6 cow bones the machine still works well. Some input from partners is to expand the size of the table and improve the appearance of the machine so that it can be sold
Performance and Economic Analysis of Solar Water Pump System Laboratory Scale
No full textThe dependence of solar radiation in generating electricity by PV will have an impact on the PVWPS performance, besides The PVWPS consists many components with different characteristics. Thus this research will investigation the performance conduct economic analysis of PVWPS. To achieve that objective measurement of data starting at 09.00 until 16.00. The data are solar radiation, voltage and current of PV/pump and the time required to fill the container with a certain volume. Analysis data is using the equations that have been predetermined and comparison other research. The results obtained that the water discharge generated by PVWPS will be proportional to solar radiation, as a result the production of electricity generated by PV. The pump efficiency and system is proportional to solar radiation. This phenomenon is the effect of water debit dependence on solar radiation. The result of economic analysis is the price of electricity generated by SPATS is relatively cheap and the water cost for every m3 is inversely proportional to the water discharge generated by the pump
ANALISIS TINGKAT KADAR OKSIGEN TERLARUT PADA KOLAM BUDIDAYA MENGGUNAKAN AERATOR VENTURI
No full textDesain dan pengujian Aerator Sistem Venturi Untuk tambak budidaya ini bertujuan untuk pengkayaan Oksigen pada kolam budidaya. Penelitian ini bertujuan untuk mengetahui desain beserta kinerja aerator sistem venturi untuk menghasilkan Microbubble dan mengetahui kadar oksigen terlarut (Dissolved oxygen) yang dihasilkan oleh konfigurasi aerator sistem venturi pada kolam budidaya. Penelitian ini dilaksanakan pada bulan Maret 2024-Agustus 2024 di kolam buatan Budidaya yang bertempat di politeknik bosowa dengan menggunakan metode desain eksperimen, dan uji analisis data kadar oksigen di dalam air. Dari hasil pengukuran kadar oksigen yang telah dilakukan, diperoleh rata-rata doubel aerator pada bukaan full kerang udara titik terendah sebesar 80,9% dan titik tertinggi sebesar 94,1% sedangkan pada bukaan ¼ kerang udara titik terendah sebesar 80,6% dan titik tertinggi sebesar 94,3%, sedangkan rata-rata kadar oksigen singel aerator pada bukaan full kerang udara titik terendah sebesar 84,8% dan titik tertinggi sebesar 90,2% sedangkan pada bukaan ¼ kerang udara titik terendah sebesar 84,0% Dan titik tertinggi sebesar 90,5%, tanpa menggunakan aerator kadar oksigen yang berada di dalam air sebesar 10,3%
RANCANG BANGUN ALAT BANTU PERAKITAN DAN PENGELASAN KURSI LABORATORIUM (LAB STOOL)
No full textThe quality of mass produced lab stools are determined based on the similarity of shape andsize of the labs stools produced. Assembly work is done by two technicians for 55 minuteswithout using assembly tools (Fixture). Based on this data, it can be inferred that in termsof working time assembly process is considered too long or inefficient in terms of time.Based on the amount of labor it is still not efficient or the productivity is still low, so theremust be innovations made to speed up the assembly time. in addition to low productivity,without assembly tools and welding the product is not similiar because there is a change ofshape after welding process. It means the quality of the product is not good. Businesscompetition in the field of metal furniture manufacture is growing so that producers have tothink of methods to improve productivity, quality and speed up production time. To increaseproductivity, it is necessary to assemble and fix the parts to be assembled to eliminateunwanted movement due to the welding distortion. The use of fixtures in the assemblyprocess can be done by one person with an average processing time of 25 minutes
RANCANG BANGUN MESIN PEMBERSIH STIKER GELAS PLASTIK LDPE
No full textPengusaha dan pengempul gelas plastik susah mendapatkan nilai jual tinngi karena gelas yang dikumpulkan masih terdapat stiker. Hal tersebut pengaruhi nilai jual ke perus ahan daur ulang limbah plastik,maka dari itu para pengusaha dan pengempul biasanya menggunakan pisau cater untuk membersihkan stiker gelas plastik, dari hasil pembersihan tersebut hanya mendapatkan 10kg/hari. Maka dari itu penulis merancang mesin pembersih stiker gelas plastik LDPE ini bertujuan membantu pengusaha beserta pengempul plastik agar mempermudah dan mempercepat proses pembersihan stiker gelas plastik untuk meningkatkan nilai jual ke perusahan daur ulang limbah plastik. Mesin pembersih ini terdiri dari dinamo servo yuasa TH-550EA,mata potong yang terbuat dari tatakan amplas dan amplas grid 60,proses pembersihan mesin ini dilakukan dengan cara mengesekan gelas plastik ke mata potong sebelum proses tersebut dilakukan gelas plastik harus dimasukan ke gelas besi agar mempermudah pembersihan dan mendapatkan hasil yang lebih bersih. Hasil dari pembersihan mesin ini mendaptkan 4,5kg/jam maka dari itu hasil produksi dalam waktu 8 jam kerja bisa menghasilkan 36kg,dengan demikian hasil produksi sebelumnya hanya mendapatkan 10kg/8jam kerja bisa meningkat menjadi 36kg/8 jam kerja mengunakan mata potong amplas grid 60
PERHITUNGAN WAKTU PROSES PEMESINAN EFEKTIF MESIN BUBUT
No full textAbstrakSalah satu Upaya untuk meningkat persaingan usaha yaitu dengan perencanaan kerja yang optimal, untuk itu perlu cara atau metode yang tepat untuk memperkirakan waktu prose setiap pekerjaan. Dalam penelitian ini dibuatkan metode untuk memperkirakan waktu proses kerja terjadi pemotongan dengan kebebasan alat potong 2 – 5 mm. Penelitian ini menggunakan metode pemodelan proses pembubutan secara bertahap dengan gambar untuk memudahkan dalam proses penentuan parameter. Parameter ini ditetapkan berdasarkan pengalaman, menggunakan tabel hasil penelitian serta menggunakan parameter pada mesin bubut SAN SHING MH 450x1000. Parameter yang sudah ditetapkan kemudian dihitung untuk mendapatkan waktu pemesinan efektif. Hasil perhitungan selanjutnya divalidasi dengan program CNC pada mesin CNC bubut MORI SEIKI NLX 2500 Y. Berdasarkan hasil pemodelan sesuai gambar kerja diperoleh waktu pemesinan 47 menit 54 detik sedangkan pengujian dengan menggunakan CNC 45 menit 48 detik. Kata kunci : Mesin bubut, waktu pemesinan, cnc bubut
Crissot and his ‘Alang Dios’: A Metacritical Study
No full textInformed by John Guillory’s theory on canon-formation, and Michel Foucault’s author-function, this present work critically analyzes the criticisms about Juan Crisostomo Soto and his masterpiece Alang Dios! It intends to disclose and interrogate the power relations/struggle at work in the creation of a “Crissot†that was over and beyond the historical man that he was—a construct, a revered author, a literary icon, a “myth†of Kapampangan Literature. Significantly, it offers critical foundation and framework in the study of regional literature which is the pressing need at the moment to help characterize national literary sensibility. Using close reading and metacriticism to unveil the assumptions, norms, and contexts that necessitated the criticisms, findings show that the critics were moved by the needs of their own time and space. This means that their criticisms were meant to satisfy the demands of time that led to the use of similar means of propagating such demands through the use of press, newspapers, agencies, relevant situations, and celebrations that led to the sense of identity and valor for every Kapampangan and Kapampangan literature as a whole amidst colonial influences, subjugations, and promising literature across regions
