8,878 research outputs found
Peter-Johannes Schuler: Die spätmittelalterliche Vertragsurkunde, 2000
No full texthttp://daten.digitale-sammlungen.de/bsb00045209/image_2 Aufgrund eines vor dem AG Siegburg geschlossenen Vergleichs äußere ich mich in Archivalia nicht zur Arbeitsweise von Peter-Johannes Schuler. Update: Herrn Buchhändler P. in R. verdanke ich den Hinweis auf eine Rezension des Werks in der ZRG GA 2002 durch Albrecht Cordes, in der es heißt: "Die Arbeit ist rechtshistorisch gesehen misslungen." http://www.koeblergerhard.de/ZRG119Internetrezensionen/CordesSchuler20010916.ht
Vector-meson electroproduction from generalized vector dominance
No full textSchildknecht D, Schuler GA, Surrow B. Vector-meson electroproduction from generalized vector dominance. PHYSICS LETTERS B. 1999;449(3-4):328-338.Including destructively interfering off-diagonal transitions of diffraction-dissociation type, we arl ive at a formulation of GVD for exclusive vector-meson production in terms of a continuous spectral representation of dipole form. The transverse cross-section, sigma(T.gamma*p) (-->) (Vp), behaves asymptotically as 1/Q(4), while R-v equivalent to sigma(L.gamma*p --> Vp)/sigma(T.gamma*p --> Vp) becomes asymptotically constant. Contributions violating s-channel helicity conservation stay at the level established in low-energy photoproduction and diffractive hadron-hadron interactions. The data on rho(0)-meson production from the Fermilab E665 Collaboration and on phi- and rho(0)-meson production from HERA are found to be in agreement with these predictions. (C) 1999 Elsevier Science B.V. All rights reserved
QUARKONIUM PRODUCTION IN HADRONIC COLLISIONS
No full textGAVAI R, KHARZEEV D, Satz H, SCHULER GA, SRIDHAR K, VOGT R. QUARKONIUM PRODUCTION IN HADRONIC COLLISIONS. INTERNATIONAL JOURNAL OF MODERN PHYSICS A. 1995;10(20n21):3043-3070.We summarize the theoretical description of charmonium and bottonium production in hadronic collisions and compare it to the available data from hadron-nucleon interactions. With the parameters of the theory established by these data, we obtain predictions for quarkonium production at RHIC and LHC energies
GA-Fuzzy PID control simulation waveform diagram.
No full textAs is well known, the metal annealing process has the characteristics of heat concentration and rapid heating. Traditional vacuum annealing furnaces use PID control method, which has problems such as high temperature fluctuation, large overshoot, and long response time during the heating and heating process. Based on this situation, some domestic scholars have adopted fuzzy PID control algorithm in the temperature control of vacuum annealing furnaces. Due to the fact that fuzzy rules are formulated through a large amount of on-site temperature data and experience summary, there is a certain degree of subjectivity, which cannot ensure that each rule is optimal. In response to this drawback, the author combined the technical parameters of vacuum annealing furnace equipment, The fuzzy PID temperature control of the vacuum annealing furnace is optimized using genetic algorithm. Through simulation and comparative analysis, it is concluded that the design of the fuzzy PID vacuum annealing furnace temperature control system based on GA optimization is superior to fuzzy PID and traditional PID control in terms of temperature accuracy, rise time, and overshoot control. Finally, it was verified through offline experiments that the fuzzy PID temperature control system based on GA optimization meets the annealing temperature requirements of metal workpieces and can be applied to the temperature control system of vacuum annealing furnaces.</div
Increasing science, technology, engineering, and mathematics skills using Project Lead the Way
No full textIncludes bibliographical references
Exploring Successful International Human Resource Management: Past, Present, and Future Directions
No full textToday, approximately 60,000 multinational enterprises (MNEs) employ more than 45 million people worldwide. This is about twice as many as in 1990, and this number is predicted to increase to 75 million people by 2010 (Schuler, 2003). This paper is dedicated to helping develop the understanding and competencies necessary for HR managers to succeed. Additionally, this paper aims to review the most important aspects of International Human Resource Management, (IHRM), such as the development of IHRM, IHRM vs. domestic HRM, successful localization, and talent management in IHRM. Finally this paper discusses issues that are likely to gain importance in the IHRM field in the near future.IHRM, HRM, Localization, Talent Management, IHRM Future
High-loading Ga-exchanged MFI zeolites as selective and coke-resistant catalysts for nonoxidative ethane dehydrogenation
No full textIn this paper, we investigated the effects of the Ga loading amount and H-2 treatment temperature for the reductive solid-state ion-exchange reaction on the generated Ga species in Ga-exchanged MFI zeolites (Ga-MFIs) as well as their catalysis for ethane dehydrogenation (EDH). For the formation of isolated Ga hydrides in the zeolites, [GaH](2+) ions were preferentially formed in the low-loading Ga-MFI (Ga/Al = 0.3) treated with H-2 at 550 degrees C, corresponding to the conventional preparation conditions, (Ga-MFI-0.3(550)), while the high Ga loading (Ga/Al = 1.0) and high-temperature H-2 treatment (800 degrees C) (Ga-MFI-1.0(800)) induced the formation of [GaH2](+) ions as the major Ga hydrides, as revealed by in situ Fourier transform infrared spectroscopy including the isotope experiment using D-2. In the context of other Ga species, such as Ga+ cations and partially reduced Ga oxides (GaOX), Ga+ cations and GaOX coexist in Ga-MFI-0.3(550), as indicated by pyridine adsorption experiments. On the other hand, GaOX was hardly observed and a larger amount of Ga+ cations was formed in Ga-MFI-1.0(800). The remaining Bronsted acid sites (BASs) were also characterized by the NH3 adsorption experiment. In the EDH reaction, Ga-MFI-1.0(800) exhibited high selectivity owing to low coke formation, resulting in the highest durability among the series of Ga-MFIs tested. Under the optimized conditions, Ga-MFI-1.0(800) exhibited the highest C2H4 formation rate among previously reported Pt-free catalysts. Based on the combined results of characterization, catalyst tests, and kinetic studies, the high selectivity and durability of Ga-MFI-1.0(800) can be ascribed to the low amount of the remaining BASs by isolated Ga species ([GaH](2+), [GaH2](+) ions and Ga+ cations) as well as the major formation of [GaH2](+) ions among isolated Ga hydrides
Element Distribution in Porous Ga Oxide Obtained by Anodizing Ga in Phosphoric Acid
No full textA STEM/EDS study of a porous Ga oxide film formed by an anodization process was conducted in this study to examine the crystalline structure of the film and the elemental distribution in the oxide film before and after heat treatment. The as-formed anodic film with a morphology resembling the well-known porous anodic Al oxide film was amorphous, crystallizing after heat treatment at 600 degrees C without changing the morphology and elemental distribution. The EDS elemental maps disclosed the duplex nature of the pore wall oxide; the phosphate anion was contaminated in the outer oxide layer next to the pores, and the inner layer consisted of relatively pure Ga oxide, practically free from phosphate. The similarity of morphology and elemental distributions between the porous anodic Al and Ga oxides suggests that the growth of both anodic oxide films proceeds under the same mechanism. In addition, crystallized porous Ga oxides are expected to be applied to fabricate various functional devices requiring geometrically controlled semiconductor nanohole arrays, such as devices for hydrogen formation. (c) 2023 The Electrochemical Society ("ECS"). Published on behalf of ECS by IOP Publishing Limited
Effect of thermal treatments in Ni-Fe-Ga with Co substitutions and Ni-Mn-Ga melt spun ribbons
No full textAbstractThe effect of “in situ” thermal treatments (by DSC measurements) on the martensitic transformation in two representative Ni-Fe-Ga and Ni-Mn-Ga alloys has been studied and discussed by correlating the structural and magnetic properties. The alloys were prepared from high purity elements, by arc melting under argon protective atmosphere as bulk and also as melt-spun ribbons - an alternative preparation route that also allows to assess the influences of grains size and strain induced by this processing method. All samples presented reversible thermo-elastic transformations. The thermal treatments promote a reduction of the martensitic transformation temperatures in the Ni-Fe-Ga investigated samples, as opposed to the stoichiometric Ni2MnGa where the temperatures increase with increasing the annealing temperatures. Interestingly however, the off-stoichiometric Ni-Mn-Ga with increased Ni content recovers the behaviour with reduction of transformation temperatures by thermal treatments. The precipitation of the secondary FCC (γ) phase is inherently found in Ni-Fe-Ga alloys with Ga ≤ 27% at, and also -although in lower amounts- in the off-stoichiometric Ni-Mn-Ga. The γ phase is considered to contribute to the decrease of the MT temperatures (via valence electrons concentration depletion of the main matrix) and of the transformation heat as well as to the final structural degradation if the temperature of the thermal treatments is further increased. In addition, this phase, located mainly at the grain boundaries, is responsible for the improved ductility of Ni-Fe-Ga based alloys. Changes in the transformation heat due to thermal treatments are observed and discussed in both types of alloys, the maxima of the transformation heat being associated with the highest atomic order. Thermo-magnetic measurements show that Ni-Fe-Ga alloys have close magnetic and structural transitions temperatures, with promising applications for magnetic refrigeration
Using group interaction history in the wild
No full textInspired by theories of how professionals enter into a reflective conversation with their work materials, the research area of interaction history seeks to make use of the accumulated actions of many people in working with digital objects. Despite compelling system designs and empirical results in laboratory settings, group interaction histories have not been widely employed. I outline a series of research questions, plans and tools that will be among the first to investigate and evaluate the use of shared interaction history in the day-to-day work of individuals and groups
- …
