1,720,958 research outputs found
The influence of laser welding configuration on the properties of dissimilar stainless steel welds
Full text linkLaser beam welding of dissimilar ferritic/martensitic stainless steels was performed in constrained butt joint configuration with the objective of identifying the influence of the melting ratio between the two base metals on the ultimate shear strength of the welds. Based on a full factorial design, experiments demonstrated that varying the incidence angle up to 45° and offsetting the focal position with respect to the materials’ interface within the limits imposed by the laser spot diameter are a reliable method to control the melting ratio and maintaining the expected resistance length at the material interface. The weld configuration parameters were correlated by means of the analysis of variance (ANOVA) method with shear resistance length and the melting ratio: the incidence of surface cracks can be significantly reduced increasing the ferritic steel area, involved in the formation of seam, over 60 % of the whole melt zone. Push-out tests performed on the specimens revealed that such a configuration has beneficial aspects on the ultimate shear strength of the seam meaning that the prevailing effect is the decreased brittleness of the weld by decreasing its carbon content under 0.5 % in weight
Experimental characterization of the inner surface in micro-drilling of spray holes: A comparison between ultrashort pulsed laser and EDM
Full text linkIn this research, the inner surface characteristics of micro-drilled holes of fuel injector nozzles were analyzed by Shear Force Microscopy (SHFM). The surface texture was characterized by maximum peak-to-valley distance and periodicity whose dimensions were related to the adopted energy. 180 μm diameter holes were drilled using ultrashort pulsed laser process using pulse energies within the range of 10-50 μJ. Laser ablated surfaces in the tested energy range offer a smooth texture with a peculiar periodic structure with a variation in height between 60 and 90 nm and almost constant periodicity. The Scanning Electron Microscopy (SEM) photograph of the Laser Induced Periodic Surface Structure (LIPSS) showed the co-existence of Low Spatial Frequency LIPSS (LSFL) and High Spatial Frequency LIPSS (HSFL). A comparative analysis was carried out between the highest laser pulse energy in the tested range energy laser drilling which enables the shortest machining time and micro-Electrical Discharge Machining (μ-EDM). On the contrary, results showed that surfaces obtained by electro-erosion are characterized by a random distribution of craters with a total excursion up to 1.5 μm with a periodicity of 10 μm. The mean-squared surface roughness (Rq) derived from the scanned maps ranges between 220 and 560 nm for μ-EDM, and between 50 and 100 nm for fs-pulses laser drilling
A study on the control of melting ratio to increase mechanical properties of laser welded joints between AISI 440C and AISI 430F
No full textLaser beam welding of dissimilar AISI 440C and AISI 430F stainless steels was investigated in a circular constrained configuration. The beam incidence angle and the offset of the focusing position respect to the contact point between the two materials were used as main control parameters to vary the melting ratio inside the seam. The objective of the study is twofold: to avoid surface microcracks related to the high percentage of carbon of the martensitic steel and to enhance the shear strength of the weld by making it less brittle. To reach this scope the effects of incidence angle and offset on weld bead geometry and melting ratio were studied by means of metallographic analyses, microstructure and microhardness characterization. As last step, the weld mechanical strength was tested by tensile-shear stress test on the whole seam. Experiments demonstrated that varying incidence angle and offsetting the focal position is a reliable method to modify the melting ratio and maintaining the expected resistance length at the material interface, as well. It was found that increasing the percentage of ferritic steel into the joint has beneficial effects on the weld quality and on the shear resistance. The critical carbon content determining the mechanical properties in the fusion zone can be calculated by taking into account the melting ratio
Water jet guided laser as an alternative to EDM for micro-drilling of fuel injector nozzles: A comparison of machined surfaces
No full textTo characterize the inner surface of the fuel injector nozzle holes drilled by EDM and water jet guided laser drilling (Laser Micro-Jet) a specifically conceived scanning probe microscopy technique with true non-contact operating mode was used. A difference in morphology of the drilled surfaces is evident from the acquired surface topography along the hole axis for the two compared drilling techniques. Results showed that the surface texture can be characterized by (i) maximum peak-to-valley distance and (ii) periodicity. Acquired maps confirm that electro-eroded surfaces are an envelope of craters randomly distributed with total excursion up to 1.7 μm with a crater size of 15 μm. While, the efficient melt expulsion and immediate cooling of water jet guided laser generates a peak to valley distance of 800 nm with a periodicity of 18 μm. Average Rq derived from the measured cylindrical surfaces was 450 nm and 150 nm for EDM and Laser Micro-Jet, respectively. Water jet guided laser drilling has proved to be a reliable alternative to EDM from the point of view of repeatability of the results and surface quality to facilitate the atomization of the fuel jet
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
- …
