1,720,962 research outputs found
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
Macroergonomic approach applied to work system modelling in product development contexts
Get PDFAbstractProduct development (PD) has an important role as a key competitive factor in business environments. The capacity of designers and other stakeholders to perceive and process product related information is burdened by the increasing complexity of products and the high demands of working life. Therefore, companies need new human-centred perspectives and methods of balancing and enhancing their overall PD processes in order to develop successful products. The main motive for this research arises from the fact that ergonomics design research has been scarce from the process-oriented and systemic methods perspective. It has mainly focused on the methods, such as those needed in user interface design, and the usability and safety testing of products. The purpose of this dissertation is to consider the PD work system from the macroergonomics perspective. Macroergonomics is a top-down sociotechnical systems approach that is concerned with the analysis, design and evaluation of work systems. Nowadays, the individual user context is the dominating source of product requirements, but the designers’ work system has significant influence on its outcome as well. As an open work system, PD covers the use and design contexts of a product, not only at the individual, but also at the social and system levels. In this dissertation, the use and design contexts of products are examined through six individual studies, which were carried out during a demanding PD project of a new simulation game. In this design process, from the initial state to the goal state, macroergonomics was used as the main theoretical guideline. In many companies, PD processes are considered and developed mainly from the project management or technological points of view. However, because of the increasing complexity and systemic nature of products, PD organisations, too, will have to become more participatory, more networked and more systems oriented. As the main findings, this dissertation indicates that the macroergonomic approach can enrich the PD process and its outcomes by emphasising the balance between the technical and social subsystems of PD work system. The emerging complexity of products must be controlled from the entire PD work system, not the individual context of use only. The research introduces a new PD work system model that includes both the design and use contexts of products and demonstrates their analogical sociotechnical structures. The value of this dissertation for the industry is that companies can overcome certain emerging challenges of PD by applying the introduced macroergonomic principles. The findings of the research may encompass the re-designing of the current PD process in a company. Instead of shutting their eyes to the complexity of the surrounding world, companies should consider it as the macroergonomic PD work system and be more aware about the overall product requirements. Academic dissertation to be presented with the assent of the Faculty of Technology of the University of Oulu for public defence in OP-sali (Auditorium L10), Linnanmaa, on 18 September 2010, at 12 noonAbstract
Product development (PD) has an important role as a key competitive factor in business environments. The capacity of designers and other stakeholders to perceive and process product related information is burdened by the increasing complexity of products and the high demands of working life. Therefore, companies need new human-centred perspectives and methods of balancing and enhancing their overall PD processes in order to develop successful products. The main motive for this research arises from the fact that ergonomics design research has been scarce from the process-oriented and systemic methods perspective. It has mainly focused on the methods, such as those needed in user interface design, and the usability and safety testing of products. The purpose of this dissertation is to consider the PD work system from the macroergonomics perspective.
Macroergonomics is a top-down sociotechnical systems approach that is concerned with the analysis, design and evaluation of work systems. Nowadays, the individual user context is the dominating source of product requirements, but the designers’ work system has significant influence on its outcome as well. As an open work system, PD covers the use and design contexts of a product, not only at the individual, but also at the social and system levels. In this dissertation, the use and design contexts of products are examined through six individual studies, which were carried out during a demanding PD project of a new simulation game. In this design process, from the initial state to the goal state, macroergonomics was used as the main theoretical guideline.
In many companies, PD processes are considered and developed mainly from the project management or technological points of view. However, because of the increasing complexity and systemic nature of products, PD organisations, too, will have to become more participatory, more networked and more systems oriented.
As the main findings, this dissertation indicates that the macroergonomic approach can enrich the PD process and its outcomes by emphasising the balance between the technical and social subsystems of PD work system. The emerging complexity of products must be controlled from the entire PD work system, not the individual context of use only. The research introduces a new PD work system model that includes both the design and use contexts of products and demonstrates their analogical sociotechnical structures. The value of this dissertation for the industry is that companies can overcome certain emerging challenges of PD by applying the introduced macroergonomic principles. The findings of the research may encompass the re-designing of the current PD process in a company. Instead of shutting their eyes to the complexity of the surrounding world, companies should consider it as the macroergonomic PD work system and be more aware about the overall product requirements
Turun AMK ja oppiminen kehityshankkeissa
No full textLuvussa tarkastellaan oppimista Turun ammattikorkeakoulun kehityshankkeissa sekä työelämätaitojen oppimisen että teoreettisen tiedon soveltamisen näkökulmista. Ammatillisen kehittymisen kannalta pidämme arvokkaina oppimisympäristöjä, joissa toteutuu tiivis vuorovaikutusta eri alojen ihmisten kesken ja joissa opiskelijoiden on mahdollista soveltaa oppimaansa teoreettista tietoa nopeasti käytäntöön. Tämä on tärkeää koska opiskelijalla edellytetään olevan työelämään siirtyessään valmiuksia osallistua myös kehittämistehtäviin. Näitä valmiuksia opiskelija voi harjoitella TKI-hankkeissa, jotka ovat varta vasten rakennettu työelämää, opetusta ja TKI-työtä yhdistäviksi alustoiksi
Author-wise bibliometric analysis based on entropy.
No full textAuthor-wise bibliometric analysis based on entropy.</p
- …
