111,835 research outputs found
author-bios-SRD-19-0063.R1 – Supplemental material for The Network Structure of Police Misconduct
No full textSupplemental material, author-bios-SRD-19-0063.R1 for The Network Structure of Police Misconduct by George Wood, Daria Roithmayr and Andrew V. Papachristos in Socius</p
Going Beyond Counting First Authors in Author Co-citation Analysis
No full textThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
No full text“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Causes, consequences, detection, and prevention of identification errors in laboratory diagnostics.
No full textLaboratory diagnostics, a pivotal part of clinical decision making, is no safer than other areas of health-care, with most errors occurring in the manually intensive preanalytical process. Patient misidentification errors are potentially associated with the worst clinical outcome due to the potential for misdiagnosis and inappropriate therapy. While it is misleadingly assumed that identification errors occur at a low frequency in clinical laboratories, misidentification of general laboratory specimens is around 1% and can produce serious harm to patients, when not promptly detected. This article focuses on this challenging issue, providing an overview on the prevalence and leading causes of identification errors, analyzing the potential adverse consequences, and providing tentative guidelines for detection and prevention based on direct-positive identification, the use of information technology for data entry, automated systems for patient identification and specimen labeling, two or more identifiers during sample collection and delta check technology to identify significant variance of results from historical values. Once misidentification is detected, rejection and recollection is the most suitable approach to manage the specimen
Multicenter evaluation of the hemolysis index in automated clinical chemistry systems
No full textBackground: In vitro hemolysis, the prevailing cause of preanalytical error in routine laboratory diagnostics, might influence the reliability of several tests, affect the quality of the total testing process and jeopardize patient safety. Although laboratory instrumentation is now routinely equipped with systems capable of automatically testing and eventually correcting for hemolysis interference, to our knowledge there are no reports that have compared the efficiency of different analytical platforms for identifying and classifying specimens with hemolysis. Methods: Serum from a healthy volunteer was spiked with varying amounts of hemolyzed blood from the same volunteer, providing a serum free hemoglobin concentration ranging from 0.0 g/L to 2.0 g/L as measured by the reference cyanmethemoglobin assay. The spiked serum samples were shipped to seven separate laboratories and the hemolysis index (HI) was tested in triplicate on the following analytical platforms: Roche Modular System P (n=4) and Integra 400 Plus (n=1), Siemens Dimension RxL (n=3), ADVIA 2400 (n=1) and ADVIA 1800 (n=1), Olympus AU 680 (n=1) and Coulter DXC 800 (n=1). Results: Satisfactory agreement of HI results was observed among the various analytical platforms, despite a trend toward overestimation by the ADVIA 2400 and 1800. After normalizing results according to the instrument-specific alert value, discrepancies were considerably reduced. All instruments except for the Dimension RxL gave values normalized to the instrument-specific alert value, <1.0 for the sample with 0.048 g/L free hemoglobin, and >1.0 for the sample with 0.075 g/L free hemoglobin. The results of the four Modular System P tests were also highly reproducible among the different facilities. When evaluating instruments that provided quantitative HI results, the mean intra-assay coefficient of variation (CV) calculated for the triplicate determinations was always between 0.1% and 2.7%. Conclusions: The results of this multicenter evaluation confirm that efficiency of different analytical platforms to correctly identify and classify unsuitable samples is satisfactory. However, more effort should be placed on the standardization of reporting HI. All the instruments that we tested provide either quantitative or qualitative results that are essentially comparable, but which should always be compared with the instrument-specific alert values to harmonize their efficiency. Clin Chem Lab Med 2009;47:934–9.Peer Reviewe
Multicenter evaluation of the hemolysis index in automated clinical chemistry systems.
No full textBackground: In vitro hemolysis, the prevailing cause of preanalytical error in routine laboratory diagnostics, might influence the reliability of several tests, affect the quality of the total testing process and jeopardize patient safety. Although laboratory instrumentation is now routinely equipped with systems capable of automatically testing and eventually correcting for hemolysis interference, to our knowledge there are no reports that have compared the efficiency of different analytical platforms for identifying and classifying specimens with hemolysis.
Methods: Serum from a healthy volunteer was spiked with varying amounts of hemolyzed blood from the same volunteer, providing a serum free hemoglobin concentration ranging from 0.0 g/L to 2.0 g/L as measured by the reference cyanmethemoglobin assay. The spiked serum samples were shipped to seven separate laboratories and the hemolysis index (HI) was tested in triplicate on the following analytical platforms: Roche Modular System P (n=4) and Integra 400 Plus (n=1), Siemens Dimension RxL (n=3), ADVIA 2400 (n=1) and ADVIA 1800 (n=1), Olympus AU 680 (n=1) and Coulter DXC 800 (n=1).
Results: Satisfactory agreement of HI results was observed among the various analytical platforms, despite a trend toward overestimation by the ADVIA 2400 and 1800. After normalizing results according to the instrument-specific alert value, discrepancies were considerably reduced. All instruments except for the Dimension RxL gave values normalized to the instrument-specific alert value, 1.0 for the sample with 0.075 g/L free hemoglobin. The results of the four Modular System P tests were also highly reproducible among the different facilities. When evaluating instruments that provided quantitative HI results, the mean intra-assay coefficient of variation (CV) calculated for the triplicate determinations was always between 0.1% and 2.7%.
Conclusions: The results of this multicenter evaluation confirm that efficiency of different analytical platforms to correctly identify and classify unsuitable samples is satisfactory. However, more effort should be placed on the standardization of reporting HI. All the instruments that we tested provide either quantitative or qualitative results that are essentially comparable, but which should always be compared with the instrument-specific alert values to harmonize their efficienc
Causes, consequences, detection, and prevention of identification errors in laboratory diagnostics.
No full textLaboratory diagnostics, a pivotal part of clinical decision making, is no safer than other areas of healthcare, with most errors occurring in the manually intensive preanalytical process. Patient misidentification errors are potentially associated with the worst clinical outcome due to the potential for misdiagnosis and inappropriate therapy. While it is misleadingly assumed that identification errors occur at a low frequency in clinical laboratories, misidentification of general laboratory specimens is around 1% and can produce serious harm to patients, when not promptly detected. This article focuses on this challenging issue, providing an overview on the prevalence and leading causes of identification errors, analyzing the potential adverse consequences, and providing tentative guidelines for detection and prevention based on direct-positive identification, the use of information technology for data entry, automated systems for patient identification and specimen labeling, two or more identifiers during sample collection and delta check technology to identify significant variance of results from historical values. Once misidentification is detected, rejection and recollection is the most suitable approach to manage the specimen. © 2009 by Walter de Gruyter
Haemolysis: an overview of the leading cause of unsuitable specimens in clinical laboratories.
No full textPrevention of medical errors is a major goal of healthcare, though healthcare workers themselves have not yet fully accepted or implemented reliable models of system error, and neither has the public. While there is widespread perception that most medical errors arise from an inappropriate or delayed clinical management, the issue of laboratory errors is receiving a great deal of attention due to their impact on the quality and efficiency of laboratory performances and patient safety. Haemolytic specimens are a frequent occurrence in clinical laboratories, and prevalence can be as high as 3.3% of all of the routine samples, accounting for up to 40%-70% of all unsuitable specimens identified, nearly five times higher than other causes, such as insufficient, incorrect and clotted samples. This article focuses on this challenging issue, providing an overview on prevalence and leading causes of in vivo and in vitro haemolysis, and tentative guidelines on identification and management of haemolytic samples in clinical laboratories. This strategy includes continuous education of healthcare personnel, systematic detection/quantification of haemolysis in any sample, immediate clinicians warning on the probability of in vivo haemolysis, registration of non-conformity, completing of tests unaffected by haemolysis and request of a second specimen for those potentially affected
Využití sociálních médií v B2B prodeji
No full textTato diplomová práce se zabývá tím, jak mohou B2B obchodníci využívat sociální média v prodeji. Na základě systematické rešerše literatury, autor zjistil, že akademici, zkoumající danou problematiku, navrhují další výzkum, a to: v kterých konkrétních krocích se dají využít sociální média v prodeji (Salo, 2017). Autor se na základě toho rozhodl zjistit, jaké sociální sítě, různé technologie a pluginy se dají využít v B2B prodeji - tzv. social sellingu. Social selling se v této práci týká primárně procesu akvizice a okrajově péčí o stávající zákazníky. Autor si vybral kvalitativní průzkum pomocí 10 hloubkových polo-strukturovaných rozhovorů, aby odhalil jak, která sociální média to jsou, tak i motivaci prodejců, proč tato média používat/nepoužívat. Aby autor dodržel správnost vyhodnocení výsledků, data byla analyzována pomocí Tématické analýzy, která v této studii vykrystalizovala 2 hlavní strategické přístupy v social sellingu. Tyto přístupy (tzv. Push a Pull strategie) obsahují praktické příklady a konkrétní aktivity, které mohou prodejci využívat v každodenní praxi. Tyto výsledky jsou prezentovány s důrazem na praktičnost a jednoduchost implementace. Tvoří proto hlavní přínos autorovo výzkumu. V poslední části autor zmiňuje výzvy a manažerská doporučení, které mohou obchodníci využít v každodenním pracovním životě.This diploma thesis focuses on social media usage in B2B sales. Based on the systematic literature review conducted by the author, he has found out that recent researchers (Salo, 2017) suggest further research in the area of how and in which sales phase should various social networking sites, technologies and plugins used. To further fill this research gap, author decided to identify these social media and their usage among B2B salespeople in the so-called social selling process. The social selling process in this thesis applies mainly to acquiring new prospects and tangentially to taking care of existing clients (follow-up step). Author has chosen a qualitative research method via conducting 10 in-depth semi-structured interviews to reveal these instruments as well as motivation of a sales person on why to use social media in the selling process. The collected data was analyzed using Thematic analysis to ensure the right procedure and to identify main themes which crystalized into 2 main strategic approaches in social selling. These approaches (Push and Pull) include practical examples of concrete activities which sales people can use in their daily jobs and are presented with focus on practicality and ease of implementation. These also form the main contribution of author`s research. In the last part, author mentions challenges in social selling and recommended managerial implications for salesforce
TeX v jednoduchém unixovém prostředí
No full textsummary:Při ladění TeXového dokumentu potřebujeme mnohokrát opakovaně pouštět TeX, podívat se, jak dopadl výsledek v prohlížeči DVI nebo PDF souboru, mrknout na výpis TeXu na terminálu, podívat se případně do logu a celou činnost opakovat. V tomto článku je ukázáno, jak tuto práci dělá autor článku. Proces "editor-TeX-kuk" je zde podporován jednoduchými unixovými nástroji: bashovým skriptem texloop, který si autor pro tyto účely vytvořil, dále terminálem Xterm a jednoduchým editorem, který umí navázat na klávesovou zkratku spuštění příkazu v systému. Čtenář se zde může inspirovat a přizpůsobit tyto nástroje svým vlastním potřebám. V článku je popsána funkce skriptu texloop, dále je neformálně rozveden dlouholetý vývoj autorova vztahu k textovým editorům a konečně je zde uvedena konfigurace terminálu Xterm, aby vyhovoval českému prostředí jak v kódování ISO-8859-2, tak v kódování UTF-8. Pro kódování UTF-8 si v závěru článku vygenerujeme TeXový formát csplain.summary:By debugging a TeX document it is necessary many times repeatedly to run TeX, to look for the result in DVI or PDF file, to gander the TeX output on the terminal, or eventually to have a look in the log-file, and all that action to repeat. In the paper it is show, how this work is made by author. The process '‘'editor-TeX-look' is supported by simple Unix tools: bash script texloop, created by author for these purposes, Xterm terminal and a simple editor, which is able to link to the shortcut key the activation of a system command. The reader could be inspired with the solution and to adapt these tools to his/her own needs. In the paper the function of the texloop script is described, and further the longstanding evolution of the author's relation to text editors is informal elaborated and finally a configuration of Xterm terminal, suitable for the czech environment with both ISO-8859-2 and UTF-8 encoding is introduced. For UTF-8 encoding the TeX format csplain is generated at the end of the paper
- …
