8 research outputs found
MHD Heat and Mass Transfer Steady Flow of a Convective Fluid Through a Porous Plate in The Presence of Multiple Parameters
- Publication venue
- Publication date
- 01/01/2022
- Field of study
No full textMHD Heat and Mass Transfer Steady Flow of a Convective Fluid Through a Porous Plate in The Presence of Diffusion Thermo and Aligned Magnetic Field
- Publication venue
- Publication date
- 01/01/2021
- Field of study
No full textHeat Transfer Analysis of Sisko Fluid Flow over a Stretching Sheet in a Conducting Field with Newtonian Heating and Constant Heat Flux
- Author
- Publication venue
- Publication date
- 01/01/2023
- Field of study
No full textThe present study investigates the steady three-dimensional flow of a Sisko fluid over a bidirectional stretching sheet under the influence of Lorentz force. Heat transfer effects have been carried out for constant heat flux and Newtonian heating systems. The transformed governing equations of the flow model are solved by using the spectral relaxation method (SRM), taking into account similarity transformations. The effects of controlling parameters on flow and derived quantities have been presented in the form of graphs and tables. Numerical benchmarks are used to characterise the effects of skin friction and heat transfer rates. It is noticed that in the case of Newtonian heating, the rate of heat transfer is higher than that in the constant heat flux case. As the stretching parameter increases, the fluid temperature decreases in both Newtonian heating and constant heat flux. It was discovered that successive over (under) relaxation (SOR) approaches will considerably boost the convergence speed and stability of the SRM system. The current findings strongly agree with earlier studies in the case of Newtonian fluid when the magnetic field is absent
Hall Current Effects on MHD Convective Flow Past a Porous Plate with Thermal Radiation, Chemical Reaction and Heat Generation/Absorption
- Publication venue
- Publication date
- 30/04/2019
- Field of study
Get PDFIn this paper an attempt is made to study the chemical reaction and combined buoyancy effects of thermal and mass diffusion on MHD convective flow along an infinite vertical porous plate in the presence of Hall current with variable suction and heat generation. A uniform magnetic field is applied in a direction normal to the porous plate. The equations governing the fluid flow are solved using the perturbation technique and the expressions for the velocity, the temperature and the concentration distributions have been obtained. Dimensionless velocity, temperature and concentration profiles are displayed graphically for different values of the parameters entering into the problem like Prandtl number Pr, Hartmann number M, Grashof number G, modified Grash of number Gc, Hall parameter m, Heat source parameter χ, Schmidt number Sc, and Chemical reaction parameter ξ. The Skin-friction coefficient, rate of heat transfer and mass transfer at the plate have been obtained and also discussed through tables. It has been observed that an increase in the Prandtl number leads to a decrease in the primary and secondary velocities, and also a decrease in the temperature. The primary and secondary velocities decrease with increase in the Chemical reaction parameter or Magnetic field parameter
Impact of variable electrical conductivity, viscosity on convective heat and mass transfer flow of CuO- and Al<sub>2</sub>O<sub>3</sub>-water nanofluids in cylindrical annulus
- Author
- Publication venue
- Publication date
- 01/01/2024
- Field of study
No full textGanteda, Charan kumar/0000-0003-1680-2078; UMAR, HUZAIFA/0000-0003-2508-9710In the food industry, electrical conductivity is essential for heating processes. The dependence on temperature conductivity of electricity on the outermost layers flow of the nanofluid is the main topic of this paper. Variable electrical conductivity, viscosity, thermo diffusion, thermal radiation and radiation absorption on convective heat and mass transfer flow Cuo and Al2O3-water nano-fluids confined in cylindrical annulus. The non-linear governing equations have been solved by finite element technique with quadratic approximation functions. For various parametric adjustments, the temperature, speed, and nanoconcentration have all been examined. Similar to the cylindrical wall, quantitative evaluations have been made of the surface resistance, temperature rate and mass transport. It is discovered that for both types of nanofluids, a higher thermo-diffusion effect leads to a lower concentration and Sherwood digits on the cylinders. An augment in Q1 enriches the rapidity in CuO-water nanofluidic system as well as decreases in Al2O3-water nanofluidic. Increased Q1 lowers the real temperature and nanoconcentration in both types of nanofluids.Science Citation Index Expande
Thermal impact of hybrid nanofluid due to inclined oscillatory porous surface with thermo-diffusion features
- Author
- Publication venue
- Publication date
- 2023
- Field of study
No full textOwing to improved thermal efficiencies of hybrid nanomaterials, various applications of such tiny particles are claimed in enhancing thermal impact in heat transfer phenomenon, improving the efficiencies of solar collectors, thermal management systems and different industrial processes. Following to such motivations in mind, this research communicates the thermal impact of hybrid nanofluid with utilization of different nanoparticles due to porous infinite plate. The characterization of hybrid nanoparticles is observed with interaction of copper (Cu), aluminium oxide (Al2O3), titanium oxide (TiO2) with water base fluid The phenomenon is supported with thermal radiation phenomenon. The porous medium with uniform permeability is considered within flow regime. The onset of chemical reaction is attributed in concentration equations. The closed form solution is obtained via analytical procedure. The thermal assessment of nanoparticles in flow regime with effect of different parameters is considered. The comparative thermal observations are reported for pure nanofluid and with different nanoparticles
Inclined surface mixed convection flow of viscous fluid with porous medium and Soret effects
- Author
- Publication venue
- Publication date
- 2024
- Field of study
No full textThe combined heat and mass transfer phenomenon is a significant aspect of engineering and industrial processes. This phenomenon finds applications in various areas such as air conditioning, cooling and heating control of electronic devices, reactors, chemical systems, and emission processes. This research model focuses on the analysis of mixed convection flow of a viscous fluid with heat and mass transfer on an inclined surface with porous medium characteristics. The study also considers external heat transfer effects, radiation, Soret influence, and chemical reactions. A perturbation solution is derived in closed form, and the impact of various parameters on the thermal behavior is investigated. A comparative analysis of the heating and cooling regimes in plate flow is conducted, revealing a reduction in velocity in the heated plate regime with changes in the permeability parameter and an increase in concentration phase due to the Soret number
Abstracts of National Conference on Research and Developments in Material Processing, Modelling and Characterization 2020
- Author
- S.R. Kumar; National Institute of Foundry and Forge Technology Ranchi, India
- N. Rajesh; Dept. of ME S V College of Engineering, Tirupati
- P.K Thakur; R&D Centre for Iron and Steel SAIL, Ranchi-834002, India
- Bandi Ramanjulu; Wolkite University SNNPR, Ethiopia.
- Adithya Garimella; Department of Mechanical Engineering Manipal University Jaipur, Rajasthan, India.
- P. Venkateswara Rao; Department of Mechanical Engineering Indian Institute of Technology Delhi, NewDelhi- 110016, India
- Rishav Saraswat; Madhav Institute of Technology and Science Gwalior-474005
- Jai Singh; Centre of Nanotechnology Indian Institute of Technology Roorkee, Roorkee-247667, India
- Kasif Ansari; BA College of Engineering Jamshedpur
- Nadeem Faisal; ITM University Gwalior, India
- APV Appa Rao; Sri.Y.N. College Narsapur
- Shamanth V; School of Mechanical Engineering REVA University, Bengaluru, Karnataka.
- Pabitra Maji; Department of Mechanical Engineering National Institute of Technology Agartala, Agartala, India- 799046
- Rishabh Srivastava; Department of Mechanical Engineering United College of Engineering and Research Naini, Prayagraj, Uttar Pradesh, India
- P. K. Swain; Department of Chemistry Satyasai Engineering College, Balasore-756002, India
- Ravi Kumar Sharma; Department of Mechanical Engineering Manipal university Jaipur
- Abdhesh Kumar; Research & Development Centre for Iron and Steel Steel Authority of India Limited, Ranchi-834002
- V Ranjith Kumar; SNS College of Technology Coimbatore, India
- Mohammad Mursaleen; Department of mechanical engineering National Institute of Technology Srinagar.
- Rahul Kanti Nath; Department of Mechanical Engineering NIT Agartala, Tripura (W), – 799046, India
- Goutam Mukhopadhyay; Tata Steel Jamshedpur 831001, India
- A. R. Tanna; Department of Physics School of Science, RK University, Rajkot-360020, Gujarat
- Suresh Babu G; Mechanical Engineering AITSR, Kadapa, India-516126
- Bharat Chandra Routara; School of Mechanical Engineering KIIT Deemed University, Bhubaneswar-751024, Odisha, India
- Niranjan C. A; Department of Mechanical Engineering B.M.S College of Engineering, Bengaluru, India
- Dasari Tharun; Department of mechanical engineering National Institute of Technology Srinagar.
- C. S. Mandloi; Laser Technology Division Raja Ramanna Centre for Advanced Technology, Indore 452013
- Arnab Das; National Institute of Technology Silchar, India
- Avanish Chandan; Materials Engineering Division CSIR-National Metallurgical Laboratory, Jamshedpur-831007
- Vinod Kumar; Research & Development Centre for Iron and Steel SAIL, Ranchi-834002, India
- Sachin Sonawane; Department of Mechanical Engineering SVERI’s College of Engineering, Pandharpur, India.
- N Chikkanna; Department of Aerospace Propulsion Technology VTU Center for PG Studies, Bangalore, India
- G. Phaomei; Department of Chemistry and CoENSTds Berhampur University, Odisha, India
- Vandana B. Parmar; Department of Physics University School of Sciences, Gujarat University, Navrangpura, Ahmedabad 380009, Gujarat, India
- Ashish B Deoghare; National Institute of Technology Silchar, India
- Rajneesh Kumar Gupta; Engineering Division CSIR-National Metallurgical Laboratory, Jamshedpur.
- Tavneet Kaur; Department of Physics Sant Longowal Institute of Engineering and Technology Longowal, Sangrur (Punjab) - 148106 (INDIA)
- Shyam Sunder Sharma; Department of Mechanical Engineering Manipal university Jaipur
- Chiradeep Ghosh; Research and Development Division Tata Steel Limited, Jamshedpur- 831001, India
- Sandeep Wangikar; Department of Mechanical Engineering SVERI’s College of Engineering, Pandharpur, Maharashtra, India.
- Sivasankara Reddy; Department of Physics School of Engineering, Presidency University, Bangalore-560064, India
- Braj Bihari Prasad; Tata Steel Jamshedpur 831001, India
- Vikram Kumar S. Jain; Department of Metallurgical and Materials Engineering National Institute of Technology Tiruchirappalli, Tiruchirappalli, India
- M. Sindhu Kavi; Department of Mechanical Engineering SNS College of Technology, Coimbatore, Tamilnadu, India
- Manish Kumar Gupta; Department of Mechanical Engineering National Institute of Technology, Patna-800005, India
- Nihal; Chandigarh University NH-95 Chandigarh-Ludhiana Highway, Mohali, Punjab- 140413
- K. K. Verma; Department of Manufacturing Engineering National Institute of Foundry and Forge Technology, Ranchi.
- R. Ganapathi; Department of Mechanical Engineering JNTUA College of Engineering, JNTUA, Ananthapuramu, Andhra Pradesh, INDIA
- Gaurav K Bansala; Academy of Scientific and Innovative Research (AcSIR) Ghaziabad, 201002, India
- Arati Lale; Department of Mechanical Engineering SVERI’s College of Engineering Pandharpur
- S Sadhu; Department of Metallurgical and Material Engineering IIT Kharagpur, India
- Purnanand Pathak; Steel Authority of India Ltd. R&D Centre for Iron and Steel, Ranchi-834002, Jharkhand, India
- Pankaj Biswas; Department of Mechanical Engineering Indian Institute of Technology Guwahati, India
- S. Gopikumar; SCAD College of Engineering and Technology Tirunelveli, India
- Suresh Kumar; Department of Physics Chaibasa Engineering College, Kelende, Jhinkpani, Jharkhand-833215, India.
- Antarjyami Giri; Department of Mechanical Engineering Government College of Engineering, Kalahandi, Bhawanipatna, Odisha, 766002, India
- Neha Sardana; Department of Metallurgical and Materials Engineering Indian Institute of Technology Ropar, Rupnagar, Punjab 140001
- Chetan Jadhav; Department of Mechanical Engineering SVERI’s College of Engineering, Pandharpur, Maharashtra, India.
- Shailesh kumar Prasad; Department of chemistry NIT Jamshedpur
- Rahul Kumar Singh; Sri Sukhmani Institute of Engineering and Technology Saraswati Vihar, Dera bassi, Punjab– 140507
- Ghanshyam Das; Dept. of Metallurgical and Materials Engineering NIFFT Ranchi, 834002
- Sukhomay Pal; Indian Institute of Technology Guwahati, Assam, India
- Mukesh Kumar Pandey; ITM University Gwalior, India
- Chidambaram TN; Dept. of Pharmacy Annamalai University, Chidambaram, TN.
- Abhishek Choudhary; PEC University of Technology Sector-12, Chandigarh-160012, India
- Serfraj Alam; Research & Development Centre for Iron and Steel SAIL, Ranchi-834002, India
- Biraj K Sahooa; Materials Engineering Division CSIR National Metallurgical Laboratory, Jamshedpur, 831007, India
- K K Keshari; R&D Centre for Iron & Steel Steel Authority of India Limited, Ispat Bhavan, Doranda, Ranchi, Jharkhand-834002, India
- S K Tripathi; Department of Physics Panjab University, Chandigarh -160 014
- Sudhanshu Shekhar pati; Department of chemistry NIT Jamshedpur
- Ravi Shankar; Electrical Engineering Department NIT Patna, India-800005
- Rahul Rai; Department of Metallurgical and Materials Engineering National Institute of Technology, Jamshedpur 831014, India
- Mageshwaran Subramani; School of Mechanical Engineering Vellore Institute of Technology (VIT), Vellore- 632014
- J K Goswamy; Department of Applied Sciences (Physics) UIET, Panjab University, Chandigarh -160 014
- Mehraj Shivendu; Department of Production Engineering BIT SINDRI Vinoba Bhave University, Hazaribhagh, Jharkhand
- Abhishek Upadhyay; Terminal Ballistics Research Laboratory Sector-30, Chandigarh-160030, India
- K.K Singh; R&D Centre for Iron and Steel SAIL, Ranchi-834002, India
- Sharath P C; Department of Metallurgical and Materials Engineering JAIN Deemed to be University, Bengaluru, Karnataka.
- Soumitra Tarafder; CSIR-National Metallurgical Laboratory Jamshedpur 831007
- Raju malraju Changal; Department of Mathematics JNTUA College of Engineering Pulivendula-516390, A.P, India
- V.C. Srivastava; Materials Engineering Division CSIR-National Metallurgical Laboratory, Jamshedpur- 831007, India
- C. Tarasasanka; RVR & JC College of Engineering India
- John Deb Barma; Department of Mechanical Engineering NIT Agartala, Tripura (W), – 799046, India
- Darshan P Shetty; Metal Print India Chennai, Tamil Nadu.
- B. Om Prakash; Department of Mechanical Engineering JNTUA College of Engineering, JNTUA, Ananthapuramu, Andhra Pradesh, INDIA
- Shalini Jaiswal; Amity University Greater Noida Campus, India
- K. L. Narayana; Department of Mechanical Engineering KL University, Vaddeswaram
- P.S. Solanki; Department of Physics Saurashtra University, Rajkot – 360 005, India
- Somnath Kumar; R&D Centre for Iron & Steel Steel Authority of India Limited, Ispat Bhavan, Doranda, Ranchi, Jharkhand-834002, India
- Ambrish Singh; Department of Mechanical Engineering Indian Institute of Technology Guwahati
- Kapil B. Jundale; Dept. of Mechanical Engineering SVERI’s College of Engineering, Pandharpur-413304
- R Kumar; Durgapur Steel Plant Steel Authority of India Limited Durgapur, West Bengal-713205, India
- Rahul Rajbhar; Aircraft Engineer Pawan Hans Helicopter Training Institute, Mumbai. Bachelor of Chemistry, Thakur College, Mumbai
- Faisal Rahmani; Birla Institute of Technology Mesra, Ranchi, India
- Shubham Sharma; Department of mechanical engineering National Institute of Technology Srinagar.
- Naveen R; Aeronautical Bannari amman Institute of Technology, Erode, Tamilnadu
- S. K. Tripathy; Department of Physics and CoENSTds Berhampur University, Odisha, India
- Bishnu Kumar Das; R & D Centre for Iron & Steel Steel Authority of India Limited Ispat Bhavan, Doranda, Ranchi, Jharkhand-834002, India
- Jailani. S; Dept. of Pharmacy Annamalai University, Chidambaram, TN.
- K.S. Srikanth; School of Mechanical Engineering Galgotias University, Greater Noida, U.P., India.
- Saurav Suman; Department of Mechanical Engineering National Institute of Technology Mizoram, India
- S B Singh; Department of Metallurgical and Material Engineering IIT Kharagpur, India
- Dhrumil M. Purohit; National Institute of Technology Silchar
- A.R. Vhanmane; Department of Mechanical Engineering NKOCET, Solapur
- Shubhayan Mukherjee; Department of Electronics West Bengal State University, Barasat, Kolkata 700126
- Ravi Bhushan; Electrical Engineering Department NIT Srinagar, J&K, India-190006
- S. DHEERAJ KUMAR; RVR & JC College of Engineering India
- Yash Khandelwal; Department of Manufacturing Engineering National Institute of Foundry and Forge Technology, Ranchi.
- Shamas U Din Hajam; Department of Mechanical Engineering National Institute of Technology Srinagar, Kashmir, India
- Pawan Kumar Saini; Department of Physics Government College, Hansi-125033, Haryana, India
- Soubhik Kumar Bhaumik; Department of Chemical Engineering IIT (ISM) Dhanbad, 826004, India
- G VERMA; Research Reactor Design and Projects Division Bhabha Atomic Research Centre, Mumbai
- Naveen Kumar; Department of Mechanical Engineering NIT, Ashok Rajpath, Mahendru, Patna, Bihar (800005), India
- Projjal Basu; SNAM Alloys R&D Centre Hosur - 635126.
- Uday Shanker Dixit; Indian Institute of Technology Guwahati India
- Swagataa Dutta; IT & Digital Transformation (Auto-Loans) Hero FinCorp Alumni (IIFT - EMBA 2019)
- N. Sen; R&D Centre for Iron & Steel Steel Authority of India Limited, Ispat Bhavan, Doranda, Ranchi, Jharkhand-834002, India
- T Venugopal; Hindusthan College of Engineering and Technology Coimbatore, India
- Rahul Mitra ; Department of Metallurgical and Materials Engineering Indian Institute of Technology Kharagpur, Kharagpur – 721302, West Bengal
- R.U. Roshan; College of Fisheries Engineering Tamil Nadu Dr.J. Jayalalithaa Fisheries University Nagapattinam
- Awadhesh Kumar Yadav; Mechanical Engineering-(Industrial System Engineering Kamla Nehru Institute of Technology Sultanpur Uttar Pradesh 228118- India.
- Jyotsna Dutta Majumdar; Department of Metallurgical and Materials Engineering Indian Institute of Technology Kharagpur, Kharagpur – 721302, West Bengal
- Rajib Dey; IIT Kharagpur
- M. Sadhasivam; Department of Metallurgical and Materials Engineering National Institute of Technology Tiruchirappalli, Tiruchirappalli, India
- Anil Govekar; Vivekanand Education Society’s College of Arts Science & Commerce, Sindhi Society, Chembur, Mumbai – 400 071, Maharashtra, INDIA
- Meruva Manikanteswara Reddy; Department of mechanical engineering National Institute of Technology Srinagar.
- S SENGUPTA; Research Reactor Design and Projects Division Bhabha Atomic Research Centre, Mumbai
- Arthita Dey; Scientific Services Tata Steel Limited, Jamshedpur-831001
- Prabhash Gokarn; Scientific Services Tata Steel, Kalinganagar
- Basavraj M. Angadi; Mechanical Engg Dept BLDEAs VP Dr.P.G. Halakatti College of Engineering & Technology Vijaypur, Karnataka
- J. Prabakaran; Annamalai University India
- Biswajit Das; Department of Mechanical Engineering BITS Pilani, Goa, INDIA
- A Chakraborty; Research and Development Tata Steel Limited, Jamshedpur, India
- Ratnesh Gupta; Materials and Metallurgical Engineering Department National Institute of Foundry and Forge Technology, Ranchi-834003, India
- Laxmidhar Besra; CSIR-Institute of Minerals & Materials Technology (IMMT) Bhubaneswar 751013, Odisha, India
- Kashif Hasan Kazmi; Production Engineering Department BIT Sindri, Dhanbad, India
- Priyabrata Sahoo; Micro-fabrication Laboratory Department of Mechanical Engineering, Indian Institute of Technology Patna, Bihta, Bihar-801103, India.
- A. A. KRISHNA VAMSI; RVR & JC College of Engineering India
- Pranoti R Bhosale; Department of Mechanical Engineering SVERI’s College of Engineering Pandharpur
- Eilene Basu; Ramaiah Medical College MS Ramaiah Nagar, P.O. MSRIT, Bengaluru - 560054, India.
- Jay Chakraborty; Materials Engineering Division CSIR-National Metallurgical Laboratory, Jamshedpur, INDIA
- Sanjay Kumar; Mechanical and Automation Engineering Department AMITY University Ranchi, Jharkhand, India
- S.R. Kumar; Department of Applied Sciences and Humanities National Institute of Foundry and Forge Technology, Ranchi, 834003, India
- A L S Brahma Reddy; Department of Metallurgical and Materials Engineering NIT Rourkela, Odisha, India-769008
- Sikta Panda; Department of Mechanical Engineering National Institute of Technology, Rourkela, 769008, India
- Mobin Majeed; College of Science and Engineering James Cook University, Australia
- NVVS Sudheer; Department of. Mechanical Engineering RVR&JC College of Engineering, Guntur
- Tapas Kumar Bandyopadhyay; Department of Metallurgical & Materials Engineering IIT Kharagpur, India 721302
- Kuldeep S. Pukale; Dept. of Mechanical Engineering SVERI’s College of Engineering, Pandharpur-413304
- Sriparna Das; Department of Electrical Engineering NIT Jamshedpur, Jharkhand, India-831014
- V C Srivastava; Academy of Scientific and Innovative Research (AcSIR) Ghaziabad, 201002, India
- Sadanand A. Namjoshi; Madhav University India
- R.S. Dubey; Department of Nanotechnology Swarnandhra College of Engineering and Technology, Narsapur, Andhra Pradesh, 534275, India
- Geetanjali V. Patil; Mechanical Engg Dept BLDEAs VP Dr.P.G. Halakatti College of Engineering & Technology Vijaypur, Karnataka
- Mayuri Baruah; Department of Production and Industrial Engineering National Institute of Technology Jamshedpur, Jamshedpur, Jharkhand, India, 831014
- Atosh Kumar Sinha; Department of Metallurgical and Materials Engineering NIT Durgapur
- Swetha N; Aeronautical Bannari amman Institute of Technology, Erode, Tamilnadu
- Shujaul Hasan; Department of Mechanical Engineering Aligarh Muslim University, India
- Mukesh Kumar Yadav; Department of Metallurgical & Materials Engineering IIT Kharagpur, India 721302
- Subhakanta Nayak; Department of Mechanical Engineering Indira Gandhi Institute of Technology, Sarang, 759146, India
- Namrata Parvat; Department of Mechanical Engineering SVERI’s College of Engineering Pandharpur
- Kaustubh Kumar Shukla; Vinayaka Mission's Research Foundation (Deemed to be University) Salem, Tamilnadu, India.
- P. Mathiyalagan; School of Mechanical Engineering Galgotias University, Greater Noida, U.P., India.
- Manohar Kumar Singh; Research & Development Centre for Iron and Steel Steel Authority of India Limited, Ranchi-834002
- Sushant Kumar Pradhan; Department of Mechanical Engineering Veer Surendra Sai University of Technology, Burla, India-768017,
- Ankita Mitra; Department of Physics Barrackpore Rastraguru Surendranath College, Barrackpore, Kolkata 700120
- Bharat Bhushan Jha; National Institute of Technology Jamshedpur
- Sekhar Didde; Department of Electronics and communication Engineering Swarnandhra College of Engineering and Technology, Narsapur, Andhra Pradesh, 534275, India
- Hrishikesh Jugade; Tata Steel Jamshedpur 831001, India
- Sudarsan Ghosh; Department of Mechanical Engineering Indian Institute of Technology Delhi, NewDelhi- 110016, India
- Avik Mondal; Research and Development Tata steel Limited, Jamshedpur, India
- H. H. Joshi; Department of Physics Saurashtra University, Rajkot-360005, Gujarat
- Sameer Ranjan; Department of Metallurgical and Materials Engineering NIT Durgapur
- Biraj Kr Sahoo; Materials Engineering Division CSIR-National Metallurgical Laboratory, Jamshedpur, INDIA
- Ritam Sarma; Department of Mechanical Engineering Indian Institute of Technology Guwahati
- U K Mondal; R & D Centre for Iron & Steel Steel Authority of India Limited Ispat Bhavan, Doranda, Ranchi, Jharkhand-834002, India
- Mathivannan K; Aeronautical Bannari amman Institute of Technology, Erode, Tamilnadu
- Subodh Patel; Scientific Services Tata Steel Limited, Jamshedpur-831001
- Vivek Kumar; Department of Mechanical Engineering United College of Engineering and Research Naini, Prayagraj, Uttar Pradesh, India
- Siddharth Jeet; Department of Mechanical Engineering Centre for Advanced Post Graduate Studies, BPUT, Rourkela, Odisha, 769004, India
- S. Rajpal; Department of Applied Sciences & Humanities National Institute of Foundry&Forge Technology, Ranchi-834003, India.
- R. Dharmaraj; KPR Institute of Engineering and Technology Coimbatore, India
- D. B. Naga Muruga; Department of Mechanical Engineering Sriram Engineering College
- V. Rajinikanth; Materials Engineering Division CSIR-National Metallurgical Laboratory, Jamshedpur- 831007, India
- Sarmistha Guha; IIT Kharagpur
- Munesh Kumari; Department of Physics OM Sterling Global University, Hisar, Haryana, India
- Dinesh Navale; Vivekanand Education Society’s College of Arts Science & Commerce, Sindhi Society, Chembur, Mumbai – 400 071, Maharashtra, INDIA
- Sachin Pawar; Tata Steel Jamshedpur 831001, India
- Preeti Verma; National Research Laboratory for Conservation of Cultural Property Lucknow, Sector E/3, Aliganj, Lucknow, India
- Sandeep S. Wangikar; SVERI’s College of Engineering Pandharpur-413304, MH, India.
- Ayan Banik; Department of Electrical Engineering Cooch Behar Government Engineering College, India
- Rajendra Roul; National Institute of Technology Rourkela Odisha, India
- Promod Kumar; Dept. of Metallurgical and Materials Engineering NIFFT Ranchi, Jharkhand
- Sasikala; MBA Apparel Management University of Madras, Chennai, Tamil Nadu, India.
- Suman Sadhu; Department of Metallurgical and Materials Engineering Indian Institute of Technology, Kharagpur, India
- Gopes Chandra Das; Department of Metallurgical and Material Engineering Jadavpur University, Kolkata-700032, India
- Vaibhav Gaur; AcSIR (CSIR-NML)
- Ankit Jain; University Department of Mechanical Engineering Rajasthan Technical University, Kota, India
- Subhash jadhav; Department of Mechanical Engineering SVERI’s College of Engineering, Pandharpur, India.
- Ravi kumar Sharma; Department of Mechanical Engineering Manipal University Jaipur, Jaipur, Rajasthan 303007, India
- Shashi Bhushan Prasad; Department of Production and Industrial Engineering National Institute of Technology Jamshedpur, Jamshedpur, Jharkhand, India, 831014
- Atosh Kumar Sinha; Department of Metallurgical and Materials Engineering NIT Durgapur, W.B. - 713209
- Srilali Siragam; Department of ECE Swarnandhra College of Engineering and Technology, Narsapur, Andhra Pradesh
- Surya Narayan Panda; Department of Mechanical Engineering Birsa Institute of Technology, Sindri, Dhanbad, Jharkhand, 828123, India.
- Shanjul Shrivastava; Department of Chemical Engineering Harcourt Butler Technical University, Kanpur – 208002, India
- P.V.S. Lakshmi Narayana; Mahatma Gandhi Institute of Technology Hyderabad, India
- Samit Kumar Singh; Madhav University India
- J. D. Baraliya; Department of Physics Saurashtra University, Rajkot-360005, Gujarat
- Rajat K. Roy; Advanced Materials & Processes Division CSIR-NML, Jamshedpur, India
- Debtanay Das; Indian Institute of Technology Guwahati, Assam, India
- Kuldip Pukale; Department of Mechanical Engineering SVERI’s College of Engineering, Pandharpur, Maharashtra, India.
- Manoj Kumar; Department of Physics OM Sterling Global University, Hisar, Haryana, India
- Satyam Srivastava; B. Tech (Hons.) Production and Industrial Engineering, NIT Jamshedpur
- Amitava Mandal; Department of Manufacturing Engineering National Institute of Foundry and Forge Technology, Ranchi.
- V.Venkatesh; Mechanical Engineering AITSR, Kadapa, India-516126
- Md Shahwaz; Department of Metallurgical & Materials Engineering IIT Kharagpur, India 721302
- R. S. Dubey; Department of ECE Swarnandhra College of Engineering and Technology, Narsapur, Andhra Pradesh
- Anup Kumar; Tata Steel Jamshedpur 831001, India
- Binayaka Nahak; Department of Mechanical Engineering Motilal Nehru National Institute of Technology Allahabad, Prayagraj, Uttar Pradesh-211004, India
- Sachin Kore; Mechanical Engineering Department IIT Guwahati, Assam
- Keval Gadani; Department of Physics Center of Education, Indian Institute of Teacher Education, Gandhinagar – 382 016, India
- Vandana Kumari Jha; Department of Chemical Engineering IIT (ISM) Dhanbad, 826004, India
- Smanyu Sawhney; Department of Mechanical Engineering Manipal University Jaipur, Rajasthan, India.
- M.V. Sai Kumar; RVR & JC college of Engineering India
- Surajit Sinha; Chief Agglomerates Tata Steel Limited, Jamshedpur, India, 831001
- Nihal; Panjab University Sector 14 Chandigarh, India
- R Shashanka; Department of Metallurgical and Materials Engineering BARTIN University, Turkey.
- R Sudhir; Bhilai Steel Plant SAIL, Bhilai-490001, India
- Gaurav Verma; ITM University Gwalior, India.
- Advaita Ghosh; Department of Electronics West Bengal State University, Barasat, Kolkata 700126
- Mohammad Mursaleen; Department of Mechanical Engineering National Institute of Technology Srinagar, Kashmir, India
- C P Paul; Laser Technology Division Raja Ramanna Centre for Advanced Technology, Indore - 452013.
- S MAMMEN; Research Reactor Design and Projects Division Bhabha Atomic Research Centre, Mumbai
- Poulami Maji; Department of Metallurgical and Materials Engineering National Institute of Technology, Jamshedpur 831014, India
- Anjana Deva; Research & Development Centre for Iron and Steel Steel Authority of India Limited, Ranchi-834002
- Debdas Roy; National Institute of Foundary & Forge Technology Hatia Ranchi
- A K Halder; Research and Development Tata Steel Limited, Jamshedpur, India
- VikashKumar; R&D Centre for Iron & Steel Steel Authority of India Limited, Ispat Bhavan, Doranda, Ranchi, Jharkhand-834002, India
- Avinash Parkhe; Department of Mechanical Engineering SVERI’s College of Engineering, Pandharpur, Maharashtra, India.
- Subrata Kumar Ghosh; Department of Mechanical Engineering National Institute of Technology Agartala, Agartala, India- 799046
- Viranshu Kumar; Dept. of Metallurgical and Materials Engineering NIFFT Ranchi, 834002
- M. Maruthi rao; Department of. Mechanical Engineering ANU, Guntur, AP, INDIA
- Manashi Adhikary; Scientific Services Tata Steel Limited, Jamshedpur-831001
- Siuli Dutta; Advanced Materials & Processes Division CSIR-NML, Jamshedpur, India
- Neha Choudhary; SGGS College Sector 26 Chandigarh India 160019
- R. Harini; College of Fisheries Engineering Tamil Nadu Dr.J. Jayalalithaa Fisheries University Nagapattinam
- Tej Pratap; Department of Mechanical Engineering Motilal Nehru National Institute of Technology Allahabad, Prayagraj, Uttar Pradesh-211004, India
- Sahebagouda Sanganagoudar; Mechanical Engineering Department Fabtech Technical Campus College of Engineering Research Sangola, India.
- Swedha N; Aeronautical Engineering Bannari amman Institute of Technology, Sathyamangalam, Erode, Tamil Nadu- 638401.
- Nehem Tudu; Department of Production and Industrial Engineering National Institute of Technology Jamshedpur, Jamshedpur, Jharkhand, India, 831014
- Shashikant Rajpal; National Institute of Foundry and Forge Technology Ranchi, India
- G.K. Bansal; Academy of Scientific and Innovative Research (AcSIR) Ghaziabad- 201002, India
- Rajeshkumar Selvaraj; School of Mechanical Engineering Vellore Institute of Technology (VIT), Vellore- 632014
- Harpreet Singh; Department of Mechanical Engineering Indian Institute of Technology Ropar, Rupnagar, INDIA
- Ratna Kumari Jilugu; Electrical Machines Bharat Heavy Electricals Limited Ramachandrapuram, Hyderabad, (TS) India
- Pabitra Maji; Department of Mechanical Engineering NIT Agartala, Tripura (W), – 799046, India
- G. Madhusudan Reddy; Defence Metallurgical Research Laboratory Hyderabad
- P Srikar; Mechanical Engineering MRCET, Hyderabad, India-500010
- K Choudhury; Durgapur Steel Plant Steel Authority of India Limited Durgapur, West Bengal-713205, India
- Mitali Saha; Department of Chemistry NIT Agartala, Tripura (W) – 799046
- Dhanashree Sonawane; Department of Mechanical Engineering SVERI’s College of Engineering Pandharpur
- Mamta Sharma; Department of Applied Sciences (Physics) UIET, Panjab University, Chandigarh -160 014
- Rina Sahu; Department of Metallurgical & Materials Engineering NIT, Jamshedpur, Jharkhand-831014, India
- Manager Singh; National Research Laboratory for Conservation of Cultural Property Lucknow, Sector E/3, Aliganj, Lucknow, India
- Trilok Chauhan; ITM University Gwalior, India.
- Aman kumar; Metallurgical and Materials engineering National Institute of Technology Jamshedpur
- Surendra Kumar Lader; Production and Industrial Engineering Department National Institute of Technology, Jamshedpur
- Karthickumar P; Department of Fish Process Engineering aCollege of Fisheries Engineering, Tamil Nadu Dr.J. Jayalalithaa Fisheries University, Nagapattinam, India
- Sangeeta Kulkarni; Govt. First Grade College Kumareshwar Nagar, Dharwad, Karnataka. 580008.
- Ambar Choubey; Laser Technology Division Raja Ramanna Centre for Advanced Technology, Indore 452013
- Pradnya Patil; Department of Mechanical Engineering SVERI’s College of Engineering, Pandharpur, Maharashtra, India.
- Dheeraj Kumar; National Institute of Technology Durgapur, India.
- Amitesh Kumar; Foundry Technology Department National Institute of Foundry and Forge Technology, Hatia, Ranchi (Jharkhand), 834003, India.
- Rahul Kanti Nath; Department of Mechanical Engineering NIT Agartala, Tripura (W) – 799046
- P Rama Krishna Rao; Sri.Y.N. College Narsapur
- Devender Singh; Sri Sukhmani Institute of Engineering and Technology Saraswati Vihar, Dera bassi, Punjab– 140507
- Krishna Priya Yagati; Department of Metallurgical and Materials Engineering NIT Durgapur
- M. A. Boda; Department of Mechanical Engineering SKN Sinhgad Institute of Technology and Science, Lonavala, (MS) India.
- Abhishek Barua; Department of Mechanical Engineering Centre for Advanced Post Graduate Studies, BPUT, Rourkela, Odisha, 769004, India
- Pankaj Sharma; Department of Mechanical Engineering Rajasthan Technical University, Rajasthan, India
- Siva Prasad racharla; Department of Mathematics S. K University, Anantapuramu, Anantapuramu-515003, A.P, India
- S.R. kumar; Department of Applied Sciences & Humanities National Institute of Foundry&Forge Technology, Ranchi-834003, India.
- Apeksha Sharma; Department of Metallurgical and Materials Engineering PEC University of Technology, Sector-12, Chandigarh 160012
- Ashok G. Matani; Professor Mechanical Engg Dept, Government College of Engineering, Amravati- [M.S.]- India
- Srinivasarao Nathani; Department of Chemistry Bapatla Engineering College, Bapatla, Andhra Pradesh, 522 102, India
- Roshan Sharma; Sri Sukhmani Institute of Engineering and Technology Saraswati Vihar, Dera bassi, Punjab– 140507
- Gaurav Kr Bansal; Materials Engineering Division CSIR-National Metallurgical Laboratory, Jamshedpur, INDIA
- Y. Harold Robinson; Vellore Institute of Technology Vellore, India
- Md Farrukh; Netaji Subhas Institute of Technology Patna, India.
- S. K. Nath; Department of Metallurgical and Materials Engineering Indian Institute of Technology Roorkee, India
- P V S Lakshminarayana; Mahatma Gandhi Institute of Technology Hyderabad
- Ranit Karmakar; Department of Metallurgical and Materials Engineering IIT Kharagpur, Kharagpur-721 302, India
- Subrata Chatterjee; Metallurgy and Materials Engineering IIEST, Shibpur, India
- Jai Prakash Gautam; SEST University of Hyderabad
- Dhirendra Prasad; Department of Metallurgical and Materials Engineering National Institute of Technology, Jamshedpur, India
- Surjya K Pal; Department of Mechanical Engineering Indian Institute of Technology Kharagpur, 721302, India
- Rathnakumar K; Tamil Nadu Open University Chennai, India
- Prakash Kumar; Production Engineering Department BIT Sindri, Dhanbad, India
- Kiran Kumar Keshari; Research & Development Centre for Iron and Steel Steel Authority of India Limited, Ranchi-834002
- Mohammad Sarfaraz ahanger; Department of mechanical engineering National Institute of Technology Srinagar.
- B K Jha; National Institute of Foundry and Forge Technology Hatia Ranchi (Jharkhand), India-834003
- Udit Kumar; National Institute of Foundry and Forge Technology Hatia, Ranchi 834003, India
- Anirban Das; Department of Physical and Material Sciences College of Engineering and Management, Kolaghat, WB, India
- Prasanna Ranade; Vivekanand Education Society’s College of Arts Science & Commerce, Sindhi Society, Chembur, Mumbai – 400 071, Maharashtra, INDIA
- ShwatiSudha; Department of Humanities Social Sciences & Management National Institute of Technology, Adityapur, Jamshedpur, Jharkhand, India - 831014
- Amit Kumar Kundu; Scientific Services Tata Steel, Kalinganagar
- Rahul Goyal; Department of Mechanical Engineering Manipal university Jaipur
- Ashis K. Panda; Advanced Materials & Processes Division CSIR-NML, Jamshedpur, India
- Priyanka Bharti; Dept. of Mechanical Engineering BCE Bhagalpur, Bihar
- P. Mastanaiah; DRDL Hyderabad
- Ankit Jain; Department of Mechanical Engineering Arya Institute of Engineering Technology and Management, Jaipur, Rajasthan
- Amaresh Kumar; Department of Production and Industrial Engineering National Institute of Technology Jamshedpur
- I.G. Jhala; Department of Physics Saurashtra University, Rajkot-360005, Gujarat
- Kushagra Goyal; Department of Metallurgical and Materials Engineering Indian Institute of Technology Ropar, Rupnagar, Punjab 140001
- J. Jhansia; Mahatma Gandhi Institute of Technology Hyderabad, India
- Susanta Kumar Sahoo; Department of Mechanical Engineering National Institute of Technology, Rourkela-769008, Odisha, India
- Dilip Kumar Bagal; Department of Mechanical Engineering Government College of Engineering, Kalahandi, Bhawanipatna, Odisha, 766002, India
- Amit Malakar; Mechanical Engineering Department Nit Arunachal Pradesh
- Anup Kumar; Scientific Services Tata Steel Limited, Jamshedpur-831001
- S. Ghosh Chowdhury; Academy of Scientific and Innovative Research (AcSIR) Ghaziabad- 201002, India
- Somnath Kumar; Research & Development Centre for Iron and Steel Steel Authority of India Limited, Ranchi-834002
- Obulesu Mopuri; Department of Mathematics S. K University, Anantapuramu, Anantapuramu-515003, A.P, India
- Lakshman Pappula; Department of Nanotechnology Swarnandhra College of Engineering and Technology, Narsapur, India
- Ratnesh Kumar Gupta; Dept. of Metallurgical and Materials Engineering NIFFT Ranchi, 834002
- Dulu Patnaik; Department of Mechanical Engineering Government College of Engineering, Kalahandi, Bhawanipatna, Odisha, 766002, India
- Suresh Kumar; Department of Physics Chaibasa Engineering College, Chaibasa, Jharkhand-833215, India
- Ghanshyam Das; Materials and Metallurgical Engineering Department National Institute of Foundry and Forge Technology, Ranchi-834003, India
- K. S. Bindra; Homi Bhabha National Institute BARC Training School Complex, Anushakti Nagar, Mumbai 400 078
- Ajay Kumar MST; Aeronautical Bannari amman Institute of Technology, Erode, Tamilnadu
- Mohd Bilal Naim Shaikh; Department of Mechanical Engineering Aligarh Muslim University, India
- S. Anand; CSIR-Institute of Materials and Minerals Technology Bhubaneswar-751013, India
- Rakibul Biswas; Department of Physics Barrackpore Rastraguru Surendranath College, Barrackpore, Kolkata 700120
- Soumyajit Das; School of Mechanical Engineering KIIT Deemed University, Bhubaneswar-751024, Odisha, India
- Baruah Mayuri ; Production and Industrial Engineering Department, NIT Jamshedpur
- Srikanth Salyan; Department of Mechanical Engineering National Institute of TechnologyTiruchirappalli, India
- Sonal Rattan; Department of Applied Sciences (Physics) UIET, Panjab University, Chandigarh -160 014
- RaviGugulothu; Department of Mechanical Engineering JNTUH College of Engineering, Hyderabad, (TS) India
- Sanjay Kumar Jha; Birla Institute of Technology Mesra, Ranchi, Jharkhand, India
- Shitanshu Shekhar Chakraborty; Materials Processing and Microsystems Laboratory CSIR-Central Mechanical Engineering Research Institute, Durgapur, India
- K Bhanu Sankara Rao; Pratt & Whitney Chair Professor SEST, UOH, Hyderabad
- Priya Choudhary; Panjab University Sector 14 Chandigarh, India
- Md Serfraj Alam; R&D Centre for Iron and Steel SAIL, Ranchi-834002, India
- T. Ram Prabhu; Defence R&D Organisation Bengaluru
- Ajit Kumar Pattanaik; Department of Mechanical Engineering Government College of Engineering, Kalahandi, Bhawanipatna, Odisha, 766002, India
- Rayappa Shrinivas Mahale; School of Mechanical Engineering REVA University, Bengaluru, Karnataka.
- Pratik K. Ray; Department of Metallurgical and Materials Engineering Indian Institute of Technology Ropar, Rupnagar – 140001, Punjab, INDIA
- S. N. Joshi; Department of Mechanical Engineering Indian Institute of Technology Guwahati
- Shashikant Rajpal; Department of Applied Sciences and Humanities National Institute of Foundry and Forge Technology, Ranchi, 834003, India
- Sangita K. Swain; Department of Chemistry and CoENSTds Berhampur University, Odisha, India
- Shiv B Singh; Department of Metallurgical and Materials Engineering Indian Institute of Technology Kharagpur, India
- Akshit Samadhiya; Department of Electrical Engineering NIT Jamshedpur, Jharkhand, India-831014
- M. M. Sinha; Department of Physics Sant Longowal Institute of Engineering and Technology Longowal, Sangrur (Punjab) - 148106 (INDIA)
- Atosh Kumar Sinha; Department of Mechanical Engineering NIT Agartala, Tripura (W), – 799046, India
- Jitendra Kumar; Department of Mechanical Engineering United College of Engineering and Research Naini, Prayagraj, Uttar Pradesh, India
- Satyendra Kumar Patel; Department of Mechanical Engineering Motilal Nehru National Institute of Technology Allahabad, Prayagraj, Uttar Pradesh-211004, India
- Vikas Kumar Choubey; Department of Mechanical Engineering NIT, Ashok Rajpath, Mahendru, Patna, Bihar (800005), India
- A. M. Vora; Department of Physics University School of Sciences, Gujarat University, Navrangpura, Ahmedabad 380009, Gujarat, India
- Bikash Kr. Chatterjee; Sinter Plant Tata Steel Limited, Jamshedpur, India, 831001
- Rahul Kanti Nath; Department of Mechanical Engineering National Institute of Technology Agartala, Agartala, India- 799046
- T. Raghavendra; Department of Production Engineering National Institute of TechnologyTiruchirappalli, Tiruchirappalli, India
- R.K. Bhogendro Meitei; Department of Mechanical Engineering National Institute of Technology Agartala, Agartala, India- 799046
- Shrikant Vidya; School of Mechanical Engineering Galgotias University, Greater Noida, U.P., India.
- Aditi Manikpuri; Department of Metallurgical & Materials Engineering IIT Kharagpur, India-721302
- Ch. SundarSingh; DNR Govt. Degree College for Women, Palakol
- Suman Mukhopadhyay; Scientific Services Tata Steel Limited, Jamshedpur-831001
- YNV Sai Ram; Annamalai University India
- UC Jha; Lovely Professional University Punjab, India
- Sufian Raja; Department of Mechanical Engineering Faculty of Engineering, University of Malaya, Malaysia
- Ashish B. Deoghare; National Institute of Technology Silchar
- V. Tejaswini; Mahatma Gandhi Institute of Technology Hyderabad, IndiaMahatma Gandhi Institute of Technology, Hyderabad, India
- R Gupta; National Institute of Foundry and Forge Technology Hatia Ranchi (Jharkhand), India-834003
- Bir Bahadur Sherpa; Terminal Ballistics Research Laboratory Sector-30, Chandigarh-160030, India
- T. Muthumanickam; Vinayaka Mission's Kirupananda Variyar Engineering College-Vinayaka Mission's Research Foundation (Deemed to be University) Salem, Tamilnadu, India.
- Ratnesh Kumar Gupta; National Institute of Foundry and Forge Technology Hatia, Ranchi 834003, India
- P Chandramohan; Sri Ramakrishna Engineering College Coimbatore, India
- C. P. Paul; Homi Bhabha National Institute BARC Training School Complex, Anushakti Nagar, Mumbai 400 078
- S G Chowdhury; Academy of Scientific and Innovative Research (AcSIR) Ghaziabad, 201002, India
- Kaushal Kishore; Scientific Services Tata Steel Limited, Jamshedpur-831001
- Manpreet Kaur; Department of Applied Sciences (Physics) UIET, Panjab University, Chandigarh -160 014
- Saurabhkumar jha; Department of chemistry NIT Jamshedpur
- Ranit Karmakar; Department of Metallurgical and Materials Engineering Indian Institute of Technology Kharagpur, India
- Sajan Kapil; Department of Mechanical Engineering Indian Institute of Technology Guwahati
- M. Yohan; Dept. of ME JNTU College of Engineering, JNTUA, Anatapuramu
- D. Patel; Mechanical and Automation Engineering Department AMITY University Ranchi, Jharkhand, India
- Mohd. Sameer Siddiqui; Department of Mechanical Engineering United College of Engineering and Research Naini, Prayagraj, Uttar Pradesh, India
- Sujith Bobba; Department of applied engineering Vignan’s Foundation for science, Technology &Research (VFSTR), Guntur, AP, India.
- Soma Vivekananda; Mechanical Engineering MRCET, Hyderabad, India-500010
- S. Santhi; Mahatma Gandhi Institute of Technology Hyderabad, India
- S. Sowmya; Department of Mechatronics Engineering Hindusthan College of Engineering and Technology, Coimbatore, Tamilnadu, India
- Pooja Singh; Department of Mechanical Engineering Manipal University Jaipur, Jaipur, Rajasthan 303007, India
- J Rama Mohan; Sri.Y.N. College Narsapur
- Ravi Ranjan; Research and Development Division TATA Steel, Jamshedpur, 831001, India
- Alok kumar Ansu; Department of Mechanical Engineering Manipal University Jaipur, Jaipur, Rajasthan 303007, India
- Samadhan J. Shinde; Department of Mechanical Engineering SVERI’s College of Engineering Pandharpur
- BhomikKetariDeogade; Mahatma Gandhi Institute of Technology Hyderabad, India
- Sampad Kumar Panda; Koneru Lakshmaiah University Green fields, Vaddeswaram, GunturDist, Andhra Pradesh
- Manas Das; Department of Mechanical Engineering Indian Institute of Technology Guwahati
- Puspanjali Mohanta; Research and Development Tata steel Limited, Jamshedpur, India
- Abhishek Kumar Jha; Production Engineering Department BIT Sindri, Dhanbad, India
- Rashmi; Department of Physics OM Sterling Global University, Hisar, Haryana, India
- Chetan C. Jadhav; Department of Mechanical Engineering SVERI’s College of Engineering Pandharpur
- Nikita Sinha; Department of Production and Industrial Engineering National Institute of Technology Jamshedpur
- L. Malleswara Rao; Sri.Y.N. College Narsapur
- Mazhar Ali; Iron Making Electrical Maintenance Tata Steel Limited, Jamshedpur, India, 831001
- Shrikrushna Bhosale; Department of Mechanical Engineering SVERI’s College of Engineering, Pandharpur, Maharashtra, India.
- C.K. Dhanapal; Dept. of Pharmacy Annamalai University, Chidambaram, TN.
- R Gaurav Kumar; Department of Metallurgical Engineering BIT Sindri, Dhanbad-828123
- A.K. Chandan; Materials Engineering Division CSIR-National Metallurgical Laboratory, Jamshedpur- 831007, India
- Vikash Kumar; Research & Development Centre for Iron and Steel Steel Authority of India Limited, Ranchi-834002
- Y.N.V. Sai Ram; RVR & JC college of Engineering India
- N.A. shah; Department of Physics Saurashtra University, Rajkot – 360 005, India
- VSM Ramakrishna R; MGIT Hyderabad, India
- S. Uma; National Institute of Technology Tiruchirapalli India
- Rahul Dev Misra; Department of Mechanical Engineering National Institute of Technology Silchar, Assam, India.
- S. K. Sahoo; High Energy Materials Research Laboratory Pune-411021, India
- Ashwani Pratap; Micro-fabrication Laboratory Department of Mechanical Engineering, Indian Institute of Technology Patna, Bihta, Bihar-801103, India
- O.Y. Venkata Subba Reddy; Mechanical Engineering MRCET, Hyderabad, India-500010
- Munmun Datta; Annamalai University Annamalainagar, Tamil Nadu – 608002
- Sayed Abbas Ali; Mechanical Engg Dept SECAB Institute of Engineering & Technology, Nauraspur Vijaypur, Karnataka
- Nitu Rani; Research and Development Tata steel Limited, Jamshedpur, India
- T. Anand; College of Fisheries Engineering Tamil Nadu Dr.J. Jayalalithaa Fisheries University Nagapattinam
- Ashok Kumar; Department of Metallurgical and Materials Engineering National Institute of Technology, Jamshedpur, 831014, India
- ArunKannan.C; CNR Vellore Institute of Technology, Vellore
- Pradeep R; College of Fisheries Engineering Tamil Nadu Dr.J. Jayalalithaa Fisheries University, Nagapattinam, India
- Vishaldatt Kohir; Mechanical Engineering Department Khaja Banda Nawaz College of Engineering Kalaburgi, Kalaburgi
- Mantra Prasad Satpathy; School of Mechanical Engineering KIIT Deemed University, Bhubaneswar-751024, Odisha, India
- Nahom Mekiso; Wolkite University SNNPR, Ethiopia.
- Bindu Pv; National Research Laboratory for Conservation of Cultural Property Lucknow, Sector E/3, Aliganj, Lucknow, India
- Arun kumar; Department of Metallurgical and Materials Engineering National Institute of Technology, Jamshedpur, 831014, India
- Pradyumn K Arya; Department of Mechanical engineering Indian Institute of Technology Indore, Indore- 452020, India
- Shazee Rahmani; Birla Institute of Technology Mesra, Ranchi, India
- Ranjit Gidde; Department of Mechanical Engineering SVERI’s College of Engineering, Pandharpur, India.
- D S Padan; Foundry Division Tata Motors Ltd. Jamshedpur, Jharkhand-831010, India
- P. Venkataramaiah; Dept. of ME S V University College of Engineering, S V University, Tirupati
- Maji Poulami ; Department of Metallurgical & Materials Engineering, NIT Jamshedpur
- Himanshu Shekhar Mishra; Foundry Division Tata Motors Ltd. Jamshedpur, Jharkhand-831010, India
- Amit Kr. Singh; Sinter Plant Tata Steel Limited, Jamshedpur, India, 831001
- Sanjeev Kumar; PEC University of Technology Sector-12, Chandigarh-160012, India
- A. Sirisha Bhadrakali; Department of Mechanical Engineering KL University, Vaddeswaram
- Raj Ballav; Production and Industrial Engineering Department National Institute of Technology, Jamshedpur
- Sumanta Mukherjee; Production Engineering Department BIT Sindri, Dhanbad, India
- Gaurab Kumar Ghosh; Department of Mechanical Engineering Indira Gandhi Institute of Technology, Sarang, 759146, India
- Sudhir Kumar Ghosh; Department of Metallurgical and Material Engineering Jadavpur University, Kolkata-700032, India
- S BHATTACHARYA; Research Reactor Design and Projects Division Bhabha Atomic Research Centre, Mumbai
- Monojit Dutta; Research and Development Division Tata Steel Limited, Jamshedpur- 831001, India
- Avinash K. Parkhe; SVERI’s College of Engineering Pandharpur-413304, MH, India.
- Faladrum Sharma; Indian Institute of Technology Guwahati India
- Ghanshyam Das; National Institute of Foundry and Forge Technology Hatia, Ranchi, Jharkhand, India
- Rahul Khatri; Department of Mechanical Engineering Manipal university Jaipur
- Kumari Namrata; Department of Electrical Engineering NIT Jamshedpur, Jharkhand, India-831014
- Lopamudra Palodhi; Department of Mechanical Engineering Indian Institute of Technology Ropar, Rupnagar – 140001, Punjab
- D.Dhanunjaya; Department of Mechanical Engineering JNTUA College of Engineering, JNTUA, Ananthapuramu, Andhra Pradesh, INDIA
- Avanish Kr Chandan; Materials Engineering Division CSIR-National Metallurgical Laboratory, Jamshedpur, INDIA
- Ankita Singh; Department of Humanities Social Sciences & Management National Institute of Technology, Adityapur, Jamshedpur, Jharkhand, India - 831014
- Shashi B. Prasad; Mechanical and Automation Engineering Department AMITY University Ranchi, Jharkhand, India
- Adirae Dinesh; MGIT Hyderabad, India
- Kundan Prakash; R&D Centre for Iron and Steel SAIL, Ranchi-834002, India
- Bikash Chandra Behera; Department of Mechanical Engineering C. V. Raman Global University Bhubaneswar-752054, India
- N. Karuppasamy; Sona College of Technology Salem, India
- Sanjay Kushwaha; Scientific Services Tata Steel Limited, Jamshedpur-831001
- Kumari Renu ; Department of Metallurgical & Materials Engineering, NIT Jamshedpur
- Matin A. Shaikh; Mechanical Engg Dept BLDEAs VP Dr.P.G. Halakatti College of Engineering & Technology Vijaypur, Karnataka
- Md. Mofeed Alam; Production Engineering Department BIT Sindri, Dhanbad, India
- Prakash Chandra Mishra; Department of Mechanical Engineering Veer Surendra Sai University of Technology, Burla, India-768017,
- Mahadeo Roy; R & D Centre for Iron & Steel Steel Authority of India Limited Ispat Bhavan, Doranda, Ranchi, Jharkhand-834002, India
- Promod Kumar Patowari; Department of Mechanical Engineering National Institute of Technology Silchar, Assam, India.
- Sabir Ali; Laser Technology Division Raja Ramanna Centre for Advanced Technology, Indore 452013
- Awadhesh Kumar; National Institute of Technology Rourkela Odisha, India
- Kumari Kanchan; Electrical Engineering Department NIT Patna, India-800005
- Sanjay N. More; Dept. of Mechanical Engineering SVERI’s College of Engineering, Pandharpur-413304
- Sambasiva Rao Mukkollu; Foundry Technology Department National Institute of Foundry and Forge Technology, Hatia, Ranchi (Jharkhand), 834003, India.
- Renu Kumari; Dept. of Metallurgical and Materials Engineering NIT Jamshedpur, Jharkhand-.831014
- Ashish Agrawal; OA-Iron & Coke Automation Division Tata Steel Jamshedpur, 831001, India
- A K Bandhyopadhyay; R&D Centre for Iron & Steel Steel Authority of India Limited, Ispat Bhavan, Doranda, Ranchi, Jharkhand-834002, India
- Swarup Bag; Mechanical Engineering Department IIT Guwahati
- Ashish Khinchi; University Department of Mechanical Engineering Rajasthan Technical University, Kota, India
- Pravin Kumar Singh; Mechanical and Automation Engineering Department AMITY University Ranchi, Jharkhand, India
- Rahul Sharma; Sri Sukhmani Institute of Engineering and Technology Saraswati Vihar, Dera bassi, Punjab– 140507
- Raghunath Kodi; Department of humanities and Sciences Bheema Institute of Technology and Science, Adoni-518301, Kurnool dist, A.P, India
- Vinod Kumar; R&D Centre for Iron and Steel SAIL, Ranchi-834002, India
- Sushant Patil; Mechanical Engineering Department Khaja Banda Nawaz College of Engineering Kalaburgi, Kalaburgi
- Anil Kumar Patra; Department of Mechanical Engineering Government College of Engineering, Kalahandi, Bhawanipatna, Odisha, 766002, India
- C.V. Papade; Department of Mechanical Engineering NKOCET, Solapur
- T. Sheela; Vinayaka Mission's Kirupananda Variyar Engineering College-Vinayaka Mission's Research Foundation (Deemed to be University) Salem, Tamilnadu, India.
- Debashis Mishra; CMR Technical Campus Kandlakoya, Medchal, Hyderabad, Telangana State, 501401, India
- Kishor K. S. Bharadwaj; Department of Mechanical Engineering National Institute of TechnologyTiruchirappalli, India
- Indrani Sen; Department of Metallurgical & Materials Engineering IIT Kharagpur, India-721302
- Naveen Kumar; Department of Mechanical Engineering United College of Engineering and Research Naini, Prayagraj, Uttar Pradesh, India
- Avanish K Chandana; Materials Engineering Division CSIR National Metallurgical Laboratory, Jamshedpur, 831007, India
- Manoharan Ramamoorthy; School of Mechanical Engineering Vellore Institute of Technology (VIT), Vellore- 632014
- Snehangshu Roy; Research & Development Centre for Iron and Steel Steel Authority of India Limited, Ranchi-834002
- Matruprasad Rout; Department of Production Engineering National Institute of Technology, Tiruchirappalli, 620015, India
- Abdhesh Prasad; R&D Centre for Iron & Steel Steel Authority of India Limited, Ispat Bhavan, Doranda, Ranchi, Jharkhand-834002, India
- Vaishnavi Lakheri; Department of Mechanical Engineering SVERI’s College of Engineering Pandharpur
- John Deb Barma; Department of Mechanical Engineering NIT Agartala, Tripura (W) – 799046
- Adil Wazeer; School of Mechanical Engineering Galgotias University, Greater Noida, U.P., India.
- Ambuj Kumar; Mechanical Engineering-(Industrial System Engineering Kamla Nehru Institute of Technology Sultanpur Uttar Pradesh 228118- India.
- Rameshwar D. Solage; Dept. of Mechanical Engineering SVERI’s College of Engineering, Pandharpur-413304
- Publication venue
- Publication date
- 06/02/2021
- Field of study
Get PDFThis book presents the abstracts of the papers presented to the Online National Conference on Research and Developments in Material Processing, Modelling and Characterization 2020 (RDMPMC-2020) held on 26th and 27th August 2020 organized by the Department of Metallurgical and Materials Science in Association with the Department of Production and Industrial Engineering, National Institute of Technology Jamshedpur, Jharkhand, India.
Conference Title: National Conference on Research and Developments in Material Processing, Modelling and Characterization 2020Conference Acronym: RDMPMC-2020Conference Date: 26–27 August 2020Conference Location: Online (Virtual Mode)Conference Organizer: Department of Metallurgical and Materials Engineering, National Institute of Technology JamshedpurCo-organizer: Department of Production and Industrial Engineering, National Institute of Technology Jamshedpur, Jharkhand, IndiaConference Sponsor: TEQIP-
