1,720,993 research outputs found
A novel stochastic framework for optimal scheduling of smart cities as an energy hub
No full textSmart cities consist of various energy systems and services that must be optimally scheduled to improve energy efficiency and reduce operation costs. The smart city layout comprises a power distribution system, a thermal energy system, a water system, and the private and public transportation systems. Additionally, several new technologies such as reconfiguration, regenerative braking energy of the metro, etc. are considered. This study is one of the first to consider all these technologies together in a smart city. The proposed power distribution system is a grid-connected hybrid AC–DC microgrid. The biogeography-based optimization algorithm was utilized to seek the best solution for scheduling micro-turbines, fuel cells, heat pumps, desalination units, energy storage systems, AC–DC converters, purchasing power from the upstream, distributed energy resources, and transferring power amongst electric vehicle parking stations and metro for the next day. Also, the reduced unscented transformation layout was used to capture the system's uncertainty. The suggested layout is implemented on an enhanced IEEE 33-bus test system to show the efficiency of the suggested method. The results show that costs and environmental pollution are reduced. By comparing the proposed smart city with other studies, the efficiency and completeness of the proposed smart city are shown
Cyber-Attack Detection and Cyber-Security Enhancement in Smart DC-Microgrid Based on Blockchain Technology and Hilbert Huang Transform
No full textDue to the simultaneous development of DC-microgrids (DC-MGs) and the use of intelligent control, monitoring and operation methods, as well as their structure, these networks can be threatened by various cyber-attacks. Overall, a typical smart DC-MG includes battery, supercapacitors and power electronic devices, fuel cell, solar Photovoltaic (PV) systems, and loads such as smart homes, plug-in hybrid electrical vehicle (PHEV), smart sensors and network communication like fiber cable or wireless to send and receive data. Given these issues, cyber-attack detection and securing data exchanged in smart DC-MGs like CPS has been considered by experts as a significant subject in recent years. In this study, in order to detect false data injection attacks (FDIAs) in a MG system, Hilbert-Huang transform methodology along with blockchain-based ledger technology is used for enhancing the security in the smart DC-MGs with analyzing the voltage and current signals in smart sensors and controllers by extracting the signal details. Results of simulation on the different cases are considered with the objective of verifying the efficacy of the proposed model. The results offer that the suggested model can provide a more precise and robust detection mechanism against FDIA and improve the security of data exchanging in a smart DC-MG
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Control of LPV Modeled AC-Microgrid Based on Mixed H2/H∞ Time-Varying Linear State Feedback and Robust Predictive Algorithm
No full textThis paper presents a robust model predictive control (RMPC) method with a new mixed H2/ H linear time-varying state feedback design. In addition, we propose a linear parameter-varying model for inverters in a microgrid (MG), in which disturbances and uncertainty are considered, where the inverters connect in parallel to renewable energy sources (RES). The proposed RMPC can use the gain-scheduled control law and satisfy both the H2 and H proficiency requirements under various conditions, such as disturbance and load variation. A multistep control method is proposed to reduce the conservativeness caused by the unique feedback control law, enhance the control proficiency, and strengthen the RMPC feasible area. Furthermore, a practical and efficient RMPC is designed to reduce the online computational burden. The presented controller can implement load sharing among distributed generators (DGs) to stabilize the frequency and voltage of an entire smart island. The proposed strategy is implemented and studied in a MG with two DG types and various load types. Specifically, through converters, one type of DGs is used to control frequency and voltage, and the other type is used to control current. These two types of DGs operate in a parallel mode. Simulation results show that the proposed RMPCs are input-to-state practically stable (ISpS). Compared with other controllers in the literature, the proposed strategy can lead to minor total harmonic distortion (THD), lower steady-state error, and faster response to system disturbance and load variation
Fourier singular values-based false data injection attack detection in AC smart-grids
No full textCyber-physical threats as false data injection attacks (FDIAs) in islanded smart microgrids (ISMGs) are typical accretion attacks, which need urgent consideration. In this regard, this paper proposes a novel cyber-attack detection model to detect FDIAs based on singular value decomposition (SVD) and fast Fourier transform (FFT). Since new research are mostly focusing on FDIAs detection in DC systems, paying attention to AC systems attack detection is also necessary; hence, AC state estimation (SE) have been used in SI analysis and in considering renewable energy sources effect. Whenever malicious data are added into the system state vectors, vectors’ temporal and spatial datum relations might drift from usual operating conditions. In this approach, switching surface based on sliding mode controllers is dialyzed to regulate detailed FFT’s coefficients to calculate singular values. Indexes are determined according to the composition of FFT and SVD in volt-age/current switching surface to distinguish the potential cyber-attack. This protection layout is presented for cyber-attack detection and is studied in various types of FDIA forms like amplitude and vector derivation of signals, which exchanged between agents such as smart sensor, control units, smart loads, etc. The prominent advantage of the proposed detection layout is to reduce the time (less than 10 milliseconds from the attack outset) in several kinds of case studies. The proposed method can detect more than 96% accuracy from 2967 sample tests. The performances of the method are carried out on AC-ISMG in MATLAB/Simulink environment
Reduction of Ripple Toothed Torque in the Internal Permanent Magnet Electric Motor by Creating Optimal Combination of Holes in the Rotor Surface Considering Harmonic Effects
No full textDue to the widespread use of electric motors in various industries, it is very important to have optimally designed motors in that they have high efficiency and lower negative effects on the quality of the power grid. Therefore, in this paper, the effects of winding type (wide and concentrated) on ripple torque in internal permanent magnet motor (IPMM) are investigated. In order to reduce the ripple torque and to increase the average torque, by making optimal holes in the rotor surface and using the sensitivity analysis method, the structure of the IPMM is improved. In this method, the number, dimensions and location of holes are optimized using the sensitivity analysis approach, which reduces the ripple torque of the motor. Using a concentrated winding instead of a wide winding, the toothed ripple torque is reduced by approximately 75% while maintaining the average torque value. Also, by making holes in the rotor surface and optimizing them using the finite element technique and sensitivity analysis, it is demonstrated that the amount of ripple torque by 20%. In the proposed approach, it is proved that in the concentrated winding, in addition to reducing the spatial harmonics, the average amount of torque can also be improved. Obtained results of the simulation confirm the effectiveness of the proposed method
Optimal multi-operation energy management in smart microgrids in the presence of ress based on multi-objective improved de algorithm: Cost-emission based optimization
No full textToday, in various leading power utilities in developing countries, achieving optimal operational energy management and planning, taking into account the costs reduction of generation, transmission and distribution of electricity, and also reducing the emission of an environmental pollutant becomes more and more important. Optimal use of renewable energy sources (RESs) is an effective way to achieve these goals. In this regard, in this research article, an improved multi-objective differential evolutionary (IMODE) optimization algorithm is suggested and performed to dispatch electricity generations in a smart microgrid (MG) system, taking into account economy and emission as competitive issues. In this paper, a nonlinear equation of multi-objective optimization issue with various equality and inequality limitations is formulated in order to lower the total operational costs of the MG considering environmental pollution effects simultaneously. In order to address the issue of optimal operation of the MG in single-objective and multi-objective forms, an intelligent method according to the improved differential evolutionary (IDE) optimization is utilized and performed and the proposed algorithm is implemented on different problems. First, it is assumed that there is no limit to the exchange of power overhead, and secondly, the limitation of power exchange with the upstream grid is considered. In multi-objective mode, these two modes are also considered. In order to show the impact of renewable energy on the cost, in the third part of the simulations, the operation is solved with maximum participation of renewable energy sources. In the final section, the sensitivity analysis on the number of populations in this problem is performed. The obtained results of the simulation are compared to differential evolutionary (DE) and particle swarm optimization (PSO) techniques. The effectiveness of the suggested multi-operational energy management method is confirmed by applying a study case system
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
- …
