196,037 research outputs found
Wykorzystanie testu Production Logging dla określenia stref dopływu wody do studni wielkośrednicowych
No full textTyt. z nagłówka.Pozostali autorzy artykułu: Jan Macuda, Wiktor Gądek, Józef Nowak.Bibliografia s. 626.Dostępny również w formie drukowanej.STRESZCZENIE: W artykule przedstawiono metodykę pomiarów, sposoby prezentacji danych oraz wyniki interpretacji profilowań zarejestrowanych sondą Production Log (PL) w ramach testu produkcyjnego w otworach hydrogeologicznych. Dla zobrazowania opisanej metodyki pomiarów produkcyjnych i ich interpretacji przedstawiono wyniki analizy pomiarów z otworu M-1 służącego jako studnia dostarczająca wodę termalną, otworu K-3 przeznaczonego do zrzutu zasolonych wód kopalnianych oraz otworu geotermalnego SS-1. SŁOWA KLUCZOWE: Production Log, studnie wielkośrednicowe, przepływ wody do otworu. ABSTRACT: Measurement methodic, data presentation modes and results of interpretation of profiling made with the use of a Production Log (PL) within a production test in hydrogeologic wells are presented in the paper. The described measuring methodic and interpretation are presented on the example of data from the geothermal well M-1, well K-3 for discharging mine's waste brine, and geothermal well SS-1. KEYWORDS: Production Log, large diameter wells, water flux
Dr. Duane M. Jackson, Morehouse College, July 2011
No full textThis video is a conversation with Dr. Duane M. Jackson. Dr. Jackson talks about his paper, "Recall and the Serial Position Effect: The Role of Primacy and Recency on Accounting Students' Performance." Jackie Daniel, AUC Woodruff Library, is the interviewer
"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States" By M. Carey.
No full text"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States: containing bried sketches of the moral and political character of those states.
By M. Carey, member of the American philosophical, and of the American Antiquarian Society, and author of The Olive Branch, Cindiciae Hibernicae, essays on banking, on political economy, and on internal improvement.
To which are now added the English editor's comments on the subject; together with Important Advice to Emigrants, and Cautions Against Impositions Practiced in the Outports
Dispelling the Myths Behind First-author Citation Counts
No full textWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Dr. Glendon Swarthout
No full textHosted by Roger M. Busfield, MSU Assistant Professor of Speech and Theater, Meet the Author is designed to introduce a general audience to a contemporary author and their work through in-depth interviews. This episode features a conversation between Dr. Glendon Swarthout, prolific author and English professor at MSU, and assistant professors Sam S. Baskett and Theodore B. Strandness
Drilling large diameter intake wells with cutter bits in loose and weakly consolidated rocks
No full textMost of the useful aquifers in Poland occur in the Quaternary and Tertiary horizons, which are deposited at a depth of tens to hundreds of meters. Owing to the need of providing large quantities of water for municipal and industrial purposes, the aquifers are more and more frequently opened with large diameter wells of various designs. Such wells are mostly drilled with the rotary method with reverse mud circulation with the use of various bits. The Quaternary and Tertiary strata abound in loose and weakly consolidated rocks therefore cutter bits are predominantly used. They allow for high rates of drilling and shorter time of drilling of the well. This significantly influences the negative influence of drilling mud on the near screen zone of the aquifer and better hydraulic properties of the well. Drillability tests were performed with cutter bits of 0.86 and 0.67 m diameter for providing high rates of drilling of large diameter intake wells in loose and weakly consolidated rocks. The research was made for measurement sections 0.5 to 1.0 m long, and each of them was drilled at con- stant rotational velocity and axial weight on bit. Prior to the drillability tests the limitation of weight on bit and rotational velocity of bit imposed by the technical characteristic of Prakla B50 rig, strength of the string and butter bit were established. Various regression models were analyzed for the sake of finding a dependence between drilling rate and axial weight on bit and rotational velocity of bit for particular macroscopically homogeneous layers. The best results were obtained for the exponent model illustrating the influence of axial weight on bit and rotational velocity of bit on the drilling rate, which has been proved by the calculated regression coefficients and statistical parameters
Simulation of thermal plant optimization and hydraulic aspects of thermal distribution loops for large campuses
No full textFollowing an introduction, the author describes Texas A&M University and its utilities system. After that, the author presents how to construct simulation models for chilled water and heating hot water distribution systems. The simulation model was used in a $2.3 million Ross Street chilled water pipe replacement project at Texas A&M University. A second project conducted at the University of Texas at San Antonio was used as an example to demonstrate how to identify and design an optimal distribution system by using a simulation model. The author found that the minor losses of these closed loop thermal distribution systems are significantly higher than potable water distribution systems. In the second part of the report, the author presents the latest development of software called the Plant Optimization Program, which can simulate cogeneration plant operation, estimate its operation cost and provide optimized operation suggestions. The author also developed detailed simulation models for a gas turbine and heat recovery steam generator and identified significant potential savings. Finally, the author also used a steam turbine as an example to present a multi-regression method on constructing simulation models by using basic statistics and optimization algorithms. This report presents a survey of the author??s working experience at the Energy Systems Laboratory (ESL) at Texas A&M University during the period of January 2002 through March 2004. The purpose of the above work was to allow the author to become familiar with the practice of engineering. The result is that the author knows how to complete a project from start to finish and understands how both technical and nontechnical aspects of a project need to be considered in order to ensure a quality deliverable and bring a project to successful completion. This report concludes that the objectives of the internship were successfully accomplished and that the requirements for the degree of Degree of Engineering have been satisfied
Drilling large diameter water wells in carbonate strata in the Lublin area
No full textOne of the most important sources of water for communal purposes in the Lublin area are the useful groundwater aquifers intaken with deep drilled wells. Such wells should be highly efficient and localized in a close vicinity of the local water supply network to lower the cost of transport. Large amounts of water can be produced by large diameter wells, where heavy duty pump aggregates can be installed. High rates of penetration cannot be obtained if the profile abounds in hardly drillable carbonate. This elongates the time of drilling and increases negative impact of mud on the near well zone of the aquifer. It also lowers hydraulic parameters of the well. To improve the efficiency of the wells, drillability tests with cogged bits were performed in carbonate rocks to optimize the mechanical parameters of drilling. Measurement sections, each 0.3 to 0.5 m long, were selected for the tests. Each section was drilled at constant rotational speed and weight of bit values. Prior to the drillability tests, the limits on the weight of bit and rotational speed of the bit were established, in line with the technological characteristic of rig Wirth B3A, strength of the string and of the cogged bit
Intern experience at CH���M Hill, Inc.: an internship report
No full textIncludes author's vita"Submitted to the College of Engineering of Texas A&M University in partial
fulfillment of the requirement for the degree of Doctor of Engineering."Includes bibliographical referencesA review of the author's internship experience with CH���M HILL, Inc.
during the period September 1975 through May 1976 is presented. During this nine month
internship the author worked as an Engineer II in the Industrial Processes discipline of this
large consulting engineering firm... The author's prime responsibility was as one of three
lead design engineers on the design of a large wastewater treatment facility for a pulp mill
in Hoquiam, Washington owned by ITT Rayonier Inc. The work generally consisted of the design
of individual treatment units and associated piping and pumping. The purpose of the project
was to provide wastewater treatment capabilities that would satisfy the effluent limitations
(standards) imposed upon the mill by the State of Washington Department of Ecology and the
U.S. Environmental Protection Agency. The author's assignment also entailed necessary
interaction with the project manager and other CH���M HILL design engineers and support staff
members, the client's representatives, and representatives of two other consulting engineering
firms working on the project. Thus, the internship position at CH���M HILL provided considerable
experience coordinating the author's work with the work of other engineers, guiding the design
and administrative efforts of a support staff, and interacting regularly with the client and
other consulting firms. This broad exposure to a variety of engineering and organizational
problems provided a valuable educational experience
Transition to turbulence in a qblique shock-wave/boundary-layer interaction at M=15
No full textDirect numerical simulations are carried out for different forcing techniques to trigger transition during the interaction between an oblique shock-wave and a laminar boundary-layer at M = 1.5. Three forcing methods are used: a) forcing of oblique unstable modes, whose shape and behaviour are determined by the local linear stability theory, b) broadband free-stream acoustic disturbances, and c) a cold plasma flow control device. While the oblique-mode breakdown is dominant for low-amplitude forcing, long streaky structures drive the transition process in a high-amplitude disturbance environment. LES are also performed on the experimental setup by the Institute of Theoretical and Applied Mechanics (ITAM) from Novosibirsk State University with cold plasma actuation. As well as the disturbance type, the effect of Reynolds number and forcing amplitude will be investigated
- …
