1,721,005 research outputs found
Investigating the effect of temperature on powder spreading behaviour in powder bed fusion additive manufacturing process by Discrete Element Method
No full textIn this study, a Discrete Element Method (DEM)-based model was developed to simulate the powder spreading process in Powder bed Fusion (PBF) for Polyamide 6 (PA6) powder, which considered the spreading speed (3 mm/s and 30 mm/s) and temperature (25 °C and 110 °C) as parameters affecting the final spreading powder layer quality. The particle horizontal and vertical velocities were analysed in regions near the spreading blade, where at the lower spreading speed, particle velocities are far less compared to the higher spreading speed. The lower particle velocities lead to gently settling down and rearranging particles during spreading on the bed, allowing a uniform powder layer to form. Increasing the spreading speed led to an increase in shear stress and inertia number. At higher temperatures, shear stresses also rise while the inertia number is slightly reduced due to the greater cohesion between particles. The generated powder layer by the DEM model was analysed using the wavelet analysis technique and compared to experiments. The spreadability index of experiments can be estimated with less than 5% error using DEM simulations, though in an approximately consistent manner that captures the experimental trends of spreading speed and temperature. The packing fraction of simulated powder layers was investigated in the spreading direction. The DEM simulations show that packing fraction decreases as temperature or spreading speed are increased, with its variation across the bed increasing for higher spreading speeds. Increasing the spreading speed leads to greater motion and inertia number of particles and, consequently, it intensifies the particle ejection and results in many unfilled areas in the spread powder layer. Increasing temperature leads to an increase in cohesivity between particles, resulting in aggregates forming on the spread powder layer
Experimental characterisation of the spreading of polymeric powders in powder bed fusion additive manufacturing process at changing temperature conditions
Full text linkThis study investigates the spreadability behaviour of four different polymeric materials, namely Polyamide 6, Polyamide 6 Black, Polypropylene, and Thermoplastic Polyurethane, under different spreading speeds (30 and 3 mm/s) and powder bed temperatures (25, 80, 110 °C) using a purposely developed experimental apparatus. Macroscopic and microscopic images of the powder layer were taken after completing the powder spreading step. A thresholding-based image processing method was utilised to evaluate the fraction of the bed area not covered by particles (NCF), and the standard deviation of pixel intensities in grayscale images (SDG) was calculated to evaluate powder layer quality in macroscopic images. NCF and SDG can provide quantitative evaluation of the quality of the spread layer, NCF in a logarithmic scale ranking and SDG in a linear scale ranking. A wavelet analysis technique was developed on microscopic panorama images obtained with grazing light to characterise the surface roughness of the layer. Results indicate that the spreadability generally worsens much more significantly than powder flow properties at increasing temperatures and, remarkably, that flowability and spreadability are unrelated. As expected, the temperature effect on powder spreading changes for the different powders are mostly governed by the approach to the powder melting temperature. Minor effects on the final layer quality were also observed at changing spreading speed
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
Author-wise bibliometric analysis based on entropy.
No full textAuthor-wise bibliometric analysis based on entropy.</p
- …
