321 research outputs found
Pendidikan Luqman Hakim di SD Negeri Pacarpeluk: Implementasi Nilai-Nilai QS. Luqman Ayat 12-19 dalam Pembentukan Karakter Siswa
Get PDFPenelitian ini bertujuan untuk mengkaji implementasi nilai-nilai QS. Luqman Ayat 12-19 dalam pembentukan karakter siswa di SD Negeri Pacarpeluk. Nilai-nilai pendidikan Luqman Hakim yang diangkat meliputi akidah, syari’ah, dan akhlak yang bersumber dari nasihat Luqman Hakim dalam Al-Qur’an Surat Luqman ayat 12-19. Metode penelitian menggunakan pendekatan kualitatif dengan observasi dan wawancara pada proses pembelajaran di SD Negeri Pacarpeluk. Implementasi nilai-nilai QS. Luqman Ayat 12-19 dalam pembentukan karakter siswa di SD Negeri Pacarpeluk dilakukan dengan memberikan nasihat dan tauladan. Hasil penelitian menunjukkan bahwa implementasi ini efektif dalam membentuk karakter religius, disiplin, dan sikap sopan santun pada siswa, sekaligus relevan dengan kebutuhan pendidikan Islam di era modern. Penelitian ini merekomendasikan penguatan integrasi antara pendidik dan orangtua dalam pembentukan karakter siswa.Penelitian ini bertujuan untuk mengkaji implementasi nilai-nilai QS. Luqman Ayat 12-19 dalam Pembentukan Karakter Siswa di SD Negeri Pacarpeluk. Nilai-nilai pendidikan Luqman Hakim yang diangkat meliputi Aqidah, syari’ah, dan akhlak yang bersumber dari nasihat Luqman Hakim dalam Al-Qur’an Surat Luqman ayat 12-19. Metode penelitian menggunakan pendekatan kualitatif dengan observasi dan wawancara pada proses pembelajaran di SD Negeri Pacarpeluk. Implementasi nilai-nilai QS. Luqman Ayat 12-19 dalam Pembentukan Karakter Siswa di SD Negeri Pacarpeluk dilakukan dengan memberikan nasihat dan tauladan. Hasil penelitian menunjukkan bahwa implementasi ini efektif dalam membentuk karakter religius, disiplin, dan sikap sopan santun pada siswa, sekaligus relevan dengan kebutuhan pendidikan Islam di era modern. Penelitian ini merekomendasikan penguatan integrasi antara pendidik dan orangtua dalam pembentukan karakter siswa.
Kata kunci: Pendidikan Luqman Hakim; Nilai-nilai QS. Luqman Ayat 12-19; Pembentukan Karakter; SD Negeri Pacarpelu
Hydraulic axle shaft puller with stand / Muhammad Luqman Hakim Salyazid
Get PDFKnowledge of the tools used in the automotive industry was critical for developing tools that weren't generated by the rested of the globe. This approached, however, was controversial because it relies purely on human strength without taking into account a number of factors that influence the possibility for damage that might occur when this task was done.
The goal was to determine the limitations of the forced strength that people could've used in deciding the usefulness of this instrument by evaluating the best approached for selecting the mechanism have been used in the tool. The parameters that determine the likelihood of these technologies to function at a speedy and effective rate were studied in depth in this project. To comprehend how precise the measurements were according to the required size, an in-depth studied of axle shaft puller technique and basic principles surrounding actual shaft size measurements on automobiles was also discussed. For a critical examination of this tool's entire project, detailed references had been created.
The limitations of the forced could've been accommodated with a thorough understanding of these tools. The examination of the right metal typed in selecting the best material was not straight forward, but the material selection for such a tool had been evaluated in deciding that the typed of material that was likely have been acceptable was chosen for this tool. However, the method used in this tool was still desirable could've still been used various age groups who were able to did vehicle repair worked because of the convenience and cheaper than other complicated and cumbersome methods.
A comparison studied was recommended for future researched in ordered to reinforce the project's outcomes and findings. There were two (2) approaches to doing a comparison studied. The first stepped was to gathered all of the models that had ever been released for this tool. Another recommendation was to evaluate the greatest features of a variety of models made by different firms in the hopes of boosting the quality of a specific tool by selecting a specific portion
Biografi ketokohan Tok Kenali / Luqman Hakim Mohd Hussin ... [et al.]
Get PDFTranskrip temubual ini adalah antara pelajar UiTM iaitu Luqman Hakim dan juga Muhammad Munir dengan Ustaz Hafiz Hukmi Bin Wardi yang merupakan cicit kepada Tok Kenali. Temubual ini di jalankan bertujuan untuk membuat kajian tentang biografi Ketokohan Tok Kenali yang mempunyai nilai warisan kepada Malaysia. Ketokohan Tok Kenali pada ketika itu menyebabkan beliau dikenali oleh kerana tingginya nilai ilmu agama yang ada padanya. Jadi kami telah memilih tajuk Ketokohan Tok Kenali kerana beliau adalah seorang tokoh ulama’ yang terkenal di seluruh nusantara terutamanya di Malaysia pada suatu masa dahulu. Selain itu, kami memilih tajuk ini kerana ingin memelihara akan sejarah negeri Kelantan kerana kebanyakan masyarakat masa kini terutamanya generasi muda tidak mengenali ulama’ seperti Tok Kenali. Dengan membuat kajian ini, kami dapat berkongsi dengan masyarakat tentang sejarah Tok Kenali serta sumbangannya kepada masyarakat suatu masa dahulu. Tok Kenali juga seorang ulama’ yang bertaraf wali Allah S.W.T kerana ilmunya di dalam pelbagai bidang termasuk Tauhid, Feqah, Tasawwuf dan banyak lagi. Beliau juga merupakan pencetus kepada sistem pengajian Pondok di tanah Melayu pada masa dahulu
Alih Aksara dan Alih Bahasa Teks Hikayat Wasiat Luqman Al-Hakim
No full textTulisan ini bertujuan untuk (a) menyajikan deskripsi naskah teks Hikayat Wasiat Luqman al-Hakim, (b) menyajikan bentuk alih aksara teks Hikayat Wasiat Luqman al-Hakim, (c) menyajikan bentuk alih bahasa teks Hikayat Wasiat Luqman al-Hakim. Jenis penelitian ini adalah penelitian filologi. Objek penelitian ini adalah naskah Hikayat Wasiat Luqman al-Hakim. Metode penelitian ini adalah metode penelitian filologi yang disesuaikan dengan tahapan penelitian dan metode deskriptif. Pada tahap pengumpulan data menggunakan metode studi pustaka, pada tahap deskripsi naskah digunakan metode deskriptif, tahap alih aksara menggunakan metode alih aksara, tahap alih bahasa menggunakan metode alih bahasa. Hasil penelitian ini adalah (1) deskripsi naskah Hikayat Wasiat Luqman al-Hakim, (2) alih aksara teks dilakukan dari bahasa Arab-Melayu ke dalam bahasa Latin, (3) alih bahasa teks dilakukan dari bahasa Melayu ke bahasa Indonesia yang disesuaikan dengan Ejaan Bahasa Indonesia (EBI). Naskah Hikayat Wasiat Luqman al-Hakim berisi penjelasan tentang seorang hamba Allah bernama Luqman al-Hakim yang mendapatkan hikmah dari Allah yaitu kesempurnaan diri dengan ilmu pengetahuan yang dimiliki dan selalu mengedepankan hal-hal yang utama. Luqman al-Hakim menyampaikan hikmah tersebut dalam bentuk nasihat-nasihat kepada anaknya
MENEMUKAN ORIENTASI TAFSIR CORAK SUFI DALAM NASIHAT LUQMAN AL-HAKIM DAN KORELASINYA DENGAN KESEHATAN MENTAL
Get PDFPenelitian ini berjudul “Menemukan Orientasi Tafsir Corak Sufi Dalam
Nasihat Luqman Al-Hakim dan Korelasinya Dengan Kesehatan Mental”. Dengan
dilatar belakangi oleh banyaknya potret anak dan pemuda bangsa yang dewasa ini
mengalami dekadensi moral. Oleh karena itu perlu dilakukan penelitian untuk
merespon dan memperbaiki dekadensi moral anak bangsa, dengan mengusung
perspektif al-Qur’an. Maka penelitian ini akan mengungkap bagaimana butiran
dan metode nasihat sufistik Luqman terhadap anaknya dalam al-Qur’an surah
Luqman, serta bagaimana implikasi nasihat Luqman al-Hakim terhadap mental
anak dalam perspektif mufassir sufi. Penelitian ini bersifat penelitian kepustakaan
(library research), sumber data yang digunakan dalam penelitian ini merujuk
kepada kitab tafsir bercorak sufistik. Dianalisis dengan menggunakan metode
analisis isi (content analysis) dalam konteks metode mauḍu’i. Adapun hasil
penelitian ini mengungkap bahwa Pertama, nasihat Luqman dalam al-Qur’an
surah Luqman terdiri dari nasihat tentang tauhid, nasihat menjaga hubungan dan
beraklak kepada orang tua, Nasihat self reminder (pengingat diri) dan Nasihat
menjaga hubungan sosial kemasyarakatan. Kedua, Metode yang digunakan oleh
Luqman dalam memberikan nasihat adalah metode hikmah, metode peringatan
yang baik dan praktek kehidupan. Ketiga, implikasi nasihat Luqman al-hakim
kepada anak-anaknya adalah matangnya sikap spiritual seorang anak, kebaikan
akhlak anak, kepribadian seorang anak dan kesalehan sosial seorang anak.
Kata Kunci: Nasihat, Luqman al-Hakim, dan Sufisti
Tandem hydrogenation-esterification of furfural using bifunctional metal-supported nanoparticle catalysts / Muhammad Luqman Hakim Hashim
No full textThe exploration of renewable resources such as rice husk for energy application is important against the fossil counterparts. Developing one-pot reaction methodologies is crucial for sustainable production of bio-derived fuels and chemicals, which typically requires a multifunctional catalyst system. This thesis reported on the one-pot process hydrogenation-esterification of furfural to furfuryl acetate using a bifunctional metal-based nanostructured catalyst, composed of rice husk (RH) derived SiO2, Cu, Al, and Mg species (RHSiO2-Cu-Al-Mg). Al and Mg metals were introduced to form RHSiO2-Cu-Al and RHSiO2-Cu-Al-Mg respectively to further improve the catalyst’s reusability and performance. The catalyst’s surface area was improved with the latter catalyst having a specific surface area of 150 m2/g. The catalytic efficiency of RHSiO2-Cu and RHSiO2-Cu-Al were also tested against RHSiO2-Cu-Al-Mg as points of comparison. Various analytical techniques were used to elucidate the physicochemical, textural, and acid-redox properties of the catalysts. It was found that the RHSiO2-Cu-Al-Mg catalyst contains an optimum amount of acid and redox sites, as demonstrated in the NH3-TPD and H2-TPR studies. Mg addition played a pivotal part in tuning the acidity of the RHSiO2-Cu-Al catalyst to promote the in-situ esterification of furfuryl alcohol with acetic acid to yield furfuryl acetate. As a result, the RHSiO2-Cu-Al-Mg catalyst exhibited the best performance in one-pot hydrogenation-esterification of furfural to furfuryl acetate (24.5% selectivity), outperforming various noble metal/silica-based catalysts. Following these results, single-atom catalysts (SACs) were developed from three metals; Pd, Ni, and Cu and their lattice strain influence on tandem hydrogenation-esterification of furfural were carefully monitored. It was observed that a low level of lattice strain in SACs tend to induce high and selective conversion of furfural to furfuryl acetate. SACs with high lattice strains have low chemical transformation performance due to poor reorientation of the active site that minimized the H2 coverage. These results validated that despite some SACs having > 95 % crystal structure perfection, small difference (< 0.1 %) in the lattice strain may induce SACs' relatively poor performance. Lastly this study focused on surface structures of nanoparticle catalysts which are mainly controlled by the hydrogen potential (pH) which are central to the promotion of selective catalysis for the production of fuels and chemicals-based substances that find domestic and industrial relevance. In this study, four different pH domains; 1, 3, 7 and 10 were employed to synthesis RHSiO2-Cu-Al-Mg nanoparticle catalyst using the one-pot procedure. It was observed that the acidic domain (pH 1and 3) provided high lattice strain (0.425 % and 0.322 %) while the basic domain (10) provided low lattice strain (0.160 %). The lattice strain (0.127 %) at neutral pH (7) was less than that of the acidic but greater than basic domain. The activity of RHS iO2-Cu-Al-Mg nanoparticle catalyst in terms pH of 1, 3, 7 and 10 are 95.8, 78.5, 95.1 and 94.3 selective to furfuryl alcohol respectively. Similarly at the same pH domain, the catalyst was 4.2, 21.5, 4.9 and 5.7 % selective to furfuryl acetate respectively during one step hydrogenation esterification reaction
Metabolic resistance status of Subang Jaya populations of aedes albopictus / Muhammad Luqman Hakim Zaki
Get PDFDengue fever and dengue haemorrhagic fever cases have intensely increase in Malaysia and become an alarming health issue. Dengue control mechanism relies almost completely on targeting the mosquito vectors by the use of chemical insecticides as either adulticides or larvicides. However the massive used of the insecticides against the vector has led to the global dissemination of insecticide resistance. Twelve dengue hotspots and non-hotspot were selected from different localities in study areas in Subang Jaya Municipality namely Subang Jaya, Seri Kembangan, Seri Serdang and Kinrara. Field collected eggs are reared in Vector Laboratory, and once the larvae and pupae emerged, they were transferred into cages accordingly. A total of 750 mosquitoes were used in this study, where 30 mosquitoes from each Lab strain (USM), hotspot and non-hotspot locations were used to triplicate the samples. 3 to 5 days old female Ae. albopictus were captured (aspirator) and preserved for the next step. The preserved mosquitoes are extracted for RNA and then being reversed transcriptased to obtain the cDNA for RT-qPCR. A total of 25|ul consisted of SYBR Green master mix, reverse and forward primers of the Gene of Interest (GOIs), cDNA template and RNase Free Water is used to run each samples in BioRad CFX96. Molecular assay showed there are expressions of Glutathione S-Transferases and Cytochrome P450 genes within Subang Jaya's Ae. albopictus populations with 91.6% for both GOIs in hotspot areas, meanwhile 66.6 % (GSTs) and 75% (Cytochrome P450) for nonhotspots areas respectively. Real time quantitative PCR (RT-qPCR) showed elevated detoxification enzyme activities of the three GOIs and these have indicated that the populations is developing resistance towards the organophosphate and pyrethroids based insecticides. Meanwhile, as for the third GOI, Esterase Lipase, there is no expression detected for all twelve hotspot and non-hotspot within the study locations. Amplification of the GSTs and Cytochrome P450 is mostly upregulated for hotspot areas compared to nonhotspot areas, whereas the Esterase Lipase has no amplification at all for all populations tested. Resistance towards insecticides used is commonly due to the ability to metabolize and hydrolyze the xenobiotics that enters the vector body systems causing them to refuse toxification and fatalities. Once the insecticides resistance is developed, the current chemical controls is no longer affecting the populations, explaining the higher number of dengue cases and dengue outbreaks and the needs for further study is warranted to curb these rising issues
Reinforced concrete building design project and project based learning: case study / Muhammad Luqman Hakim Omar
Get PDFThe planning works are done on six different structures. Those structures are very essential to the development of the building. the foremost critical a part of the structure is taken from the planning key-plan so as to style the structure with the foremost suitable dimensions and reinforcements. Therefore, the procedure of the key-plan is crucial within the process of constructing a building. during this case, the development of a two-storey building is started with the proposal of the project schedule. The project schedule plays a serious role on keeping the work process smooth and avoiding any unwanted casualties. The project schedule also helps on reducing the development period of the building. After the project schedule is finished, the Structural key plan of the building will happen to acknowledge and determine the positions of the structures in each floor. The primary structure is that the slab with the most important area from the key-plan. A two way restrained slab is analysed to work out the acceptable and therefore the most effective sort of reinforcement bars to be used. But first, the permanent load is decided by assuming the thickness of the slab. during this project, the thickness of the slab is 150 mm. The critical moment and therefore the critical shear at midspan and support also will be determined by pertaining to the planning appendix. it's crucial to work out the area or reinforcement bars because an area that's too small or overlarge can cause major failures on the structure. during this project, the sort of reinforcements bar used for the slab structure is H 12-300 which suggests the diameter of the bar used are going to be 12 mm. The second structure which will be designed is that the simply supported beam and therefore the continuous beam. For simply supported beam, there's just one span of beam which will be analysed and style . the dimensions estimated for the beam during this project is 450 mm tall and 250 mm in breadth . the planning load of the beam will then be determined to get the instant and shear value. then , the most reinforcements, and therefore the shear reinforcements of the simply supported beam are going to be determined by pertaining to the planning appendix. As for the continual beam, there are exactly six spans of beams involved and therefore the load analysis of the beam will involves the distribution table method so as to work out the worth of moments and shears across the six spans of beams in discussion. This way, the sort of reinforcement bars for both main reinforcements and shear reinforcements are often determined
Industrial training report: ZUS coffee HQ Selangor / Muhammad Luqman Hakim Mohd Hattar
No full textThe purpose of this report is to write about my internship during these 6 months at ZUS coffee HQ Selangor from 4 September 2023 until 16 February 2024. ZUS coffee now one of the fastest coffee chain industries in Malaysia and still growing till now. I am very grateful to be placed in the HR department in line with the course I studied for my degree which is Bachelor in Business Administration (Hons.) Human Resource Management. In this report, I’ve included important things such as their company background, vision and mission of ZUS coffee, their objectives, organizational structure, my training reflection, PESTEL Analysis, SWOT Analysis and SWOT Matrix.
For company background, I provide some information about ZUS coffee, such as the year ZUS coffee was established, the number of branches that were successfully established, their collaboration and many more. This company background can further enhance the reader’s understanding of ZUS Coffee. I also mentioned their vision, mission and objectives here.
As a conclusion, I learned a lot about how to conduct HR-related work during my six-month internship at ZUS coffee. In addition to advancing my HR knowledge, these six months of experience have helped me develop my soft skills and get ready for the future working environment
The Sufism Da'wah of Shaykh KH. M. Luqman Hakim on Urban Muslim Societies
No full textThe condition of urban society is haunted by the turmoil of facing the seemingly erratic turn of the times and experiencing a sense of loss from himself, namely the spiritual side. So, Sufism da'wah was born by KH. M. Luqman Hakim, a charismatic kyai and multidisciplinary religious scholar with the aim of treating their dry and withered spirit. The purpose of the research is to understand and explore more deeply the Sufism da'wah of KH M. Luqman Hakim in urban Muslim communities. The research is a qualitative phenomenological case study model and primary data is obtained from the interview and the documentation of KH M. Luqman Hakim’s da’wah and his jama'ah. Luqman Hakim’s sufistic recitation congregations spread across 7 major cities in Indonesia, as well as secondary data from scientific journals, books, websites, and documentation. The research found that Sufism da'wah by Shaykh KH M. Luqman Hakim was carried out in three forms, namely da'wah mimbariyah, da'wah through YouTube, and written da'wah. The main target of his da'wah is the urban Muslim community. The material is tailored to the diverse spiritual capacities of the congregation not only attracts his da’wah to urban Muslims of generations X and Y, but also millennials and Z generations
- …
