1,720,972 research outputs found
Thermal tresses and microcracking in calcite and dolomite marbles via finite element modelling
No full textThermal degradation of marble: indications from finite-element modelling
No full textMicrostructure-based finite-element simulations were used to study the thermo-mechanical behaviour of calcite marbles. Given the same nucrostructure, a strongly textured marble had smaller thermal stresses, smaller elastic strain energy and a distinct directional dependence of thermal degradation compared to a weakly textured marble. This result of modelling coincides with observations from thermal expansion experiments. Different boundary conditions assumed in the model calculations have an important influence on the magnitude and pattern of thermally induced microcracks. Microstructure-based finite element simulations are considered an excellent tool for elucidating influences of the rock's fabric on the thermal degradation of marbles. (C) 2003 Elsevier Ltd. All rights reserved
Thermal-elastic response of marble polycrystals: Influence of grain orientation configuration
No full textTwo-dimensional, microstructure-based finite element simulations were used to elucidate the influence of grain orientation configuration on the thermal-elastic response of poly-crystalline ceramic materials. The two main constituent minerals of marbles, calcite and dolomite, were considered. The crystallographic configuration of the grains is described in terms of the distribution of grain orientations and grain-boundary misorientations. To probe the influence of grain orientation configuration, we first generated the geometry of a hypothetical microstructure. Next, crystallographic orientations were assigned to each grain in the microstructure such that the grain orientations and grain-boundary misorientations matched predefined distributions. By varying the predefined distributions, we generated 45 unique microstructures covering, a wide range of crystallographic configurations. After assigning thermal-elastic properties to each structure. corresponding to either calcite or dolomite, finite-element simulations were performed. The simulations demonstrated that both the orientation and misorientation distributions have a substantial impact on the thermal-elastic response of microstructures with the same material properties: varying the crystallographic configuration results in variations of stored elastic strain energy density from 10 kJ m(-3) to 39 kJ m(-3) for a 100 degrees C temperature change. Further, the ratio of the bulk coefficient of thermal expansion in the two principal directions varies from -0.17 to 1.46. Surprisingly, the grain-boundary misorientations alone had a substantial impact on the thermal-elastic response of the system. By simply rearranging a fixed set of crystallographic orientations to obtain different nearest-neighbor misorientation configurations, we observed variations in strain energy density from 10 kJ m(-3) to 39 kJ m(-3) and variations in thermal expansion ratio from 0.06 to 0.90. The results suggest that to predict accurately the thermal-elastic response of polycrystalline ceramics, it is critical to consider both the distribution of grain-boundary misorientations as well as the distribution of grain orientations
Microcracking in calcite and dolomite marble: microstructural influences and effects on properties
No full textMicrostructure‐based finite-element analysis with a microcracking algorithm was used to simulate an actual degradation phenomenon of marble structures, i.e., microcracking. Both microcrack initiation and crack propagation were characterized, as were their dependence on lattice preferred orientation (LPO), grain shape preferred orientation (SPO), grain size, marble composition (calcite and dolomite) and grain‐boundary fracture toughness. Two LPOs were analyzed: a random orientation distribution function and an orientation distribution function with strong directional crystalline texture generated from a March–Dollase distribution. Three SPOs were considered: equiaxed grains; elongated grains and a mixture of equiaxed and elongated grains. Three different grain sizes were considered: fine grains of order 200 μm (only calcitic marble); medium size grains of order 1 mm (calcitic and dolomitic marbles); and large grains of order 2 mm (only dolomitic marble). The fracture surface energy for the grain boundaries, γig, was chosen to be 20 and 40 % of the fracture surface energy of a grain, γxtal, so that both intergranular and transgranular fracture were possible. Studies were performed on these idealized marble microstructures to elucidate the range of microcracking responses. Simulations were performed for both heating and cooling by 50 °C in steps of 1 °C. Microcracking results were correlated with the thermoelastic responses, which are indicators related to degradation. The results indicate that certain combinations of LPO, SPO, grain size, grain‐boundary fracture toughness and marble composition have a significant influence on the thermal-elastic response of marble. Microstructure with the smallest grain size and the highest degree of SPO and LPO had less of a tendency to microcrack. Additionally, with increasing SPO and LPO microcracking becomes more spatially anisotropic. A significant observation for all microstructures was an asymmetry in microcracking upon heating and cooling: more microcracking was observed upon cooling than upon heating. Given an identical microstructure and crystallographic texture, calcite showed larger thermal stresses than dolomite, had an earlier onset of microcracking upon heating and cooling, and a greater microcracked area at a given temperature differential. Thermal expansion coefficients with and without microcracking were also determined
Influence of shape fabric and crystal texture on marble degradation phenomena: simulations
Full text linkMicrostructure-based finite element simulations were used to study the influence of grain shape fabric and crystal texture on thermoelastic responses related to marble degradation phenomena. Calcite was used as an illustrative example for studying extremes of shape preferred orientation (SPO) in shape fabric and lattice preferred orientation (LPO) in crystal texture. Three SPOs were analyzed: equiaxed grains, elongated grains, and a mixture of equiaxed and elongated grains. Three LPOs were considered: a random orientation distribution function and two degrees of strong directional crystal texture. Finally, the correlation between the direction of the LPO with respect to that of the SPO was examined. Results show that certain combinations of SPO, LPO, and their directional relationship have significant influence on the thermomechanical behavior of marble. For instance, while there is no major dependence of the elastic strain energy density and the maximum principal stress on SPO for randomly textured microstructures, there is a strong synergy between LPO and its directional relationship with respect to the SPO direction. Microcracking precursors, elastic strain energy density, and maximum principal stress, decrease when the crystalline c-axes have fiber texture perpendicular to the SPO direction, but increase significantly when the c-axes have fiber texture parallel to the SPO direction. Moreover, the microstructural variability increases dramatically for these latter configurations. In general, the influence of LPO was as expected, namely, the strain energy density and the maximum principal stress decreased with more crystal texture, apart from for the exception noted above. Spatial variations of these precursors indicated regions in the microstructure with a propensity for microcracking. Unexpectedly, important variables were the microstructural standard deviations of the spatial distributions of the microcracking indicators. These microstructural standard deviations were as large as or larger than the variables themselves. The elastic misfit-strain contributions to the coefficients of thermal expansion were also calculated, but their dependence was as expected
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
- …
