16 research outputs found
PENGARUH PROGRAM NIGHTMARE SIDE ARDAN FM TERHADAP KEPERCAYAAN HAL MISTIS: Studi Terhadap Pendengar Nightmare Side di Kota Bandung
Get PDFMedia massa merupakan salah satu alat penyebaran informasi yang memiliki fungsinya antara lain adalah memengaruhi, salah satu media massa yang masih bertahan hingga saat ini adalah radio. Salah satu radio ternama di Kota Bandung adalah Ardan Radio, yang memiliki satu satunya program mengenai hal mistis di Kota Bandung yaitu program Nightmare Side. Tujuan dari penelitian ini adalah mengetahui ada atau tidaknya pengaruh program Nightmare Side Ardan FM terhadap kepercayaan hal mistis para pendengarnya. Pendekatan penelitian yang digunakan adalah pendekatan kuantitatif dengan metode korelasional. Pada penelitian ini menggunakan sampel sebanyak 100 orang responden yang diambil menggunakan teknik purposive sampling. Didapatkan hasil bahwa program Nightmare Side secara simultan memiliki pengaruh kuat dengan kepecayaan hal mistis para pendengarnya sebesar 0.799. Selain itu nilai koefesien determinasi yang didapatkan sebesar 0,639 yang artinya program Nightmare Side Ardan FM memiliki pengaruh positif yang signifikan sebesar 63,9% terhadap kepercayaan hal mistis bagi para pendengarnya. ..... One of the main functions of mass media is to influence their audience. In spite of the technological advancements, the radio as one of the media, is still serve it purpose by producting contents to their audiences. The research attempts to investigate the correlations between radio program and the audience believe toward the program. As the subject of the study, the author focuses on a mystical based program produced by a local radio station. The program is known as “Nightmare Side” and it is very popular among the listeners. Quantitative approach with correlational method were used to this analyze the data. One hundred respondents were chosen as the sample of the study taken with purposive sampling technique. As the result is Nightmare Side's program simultaneously has a strong influence to the listeners belief in mystical things with 0.799 simultant correlation point. And the result have a determination coefficient of 0.639 which means this program has significantly positive influence in 63.9% with mystical belief to its listener
Analisis Kepadatan Lalu lintas Dengan Menggunakan Metode ICA dan SVM
Get PDFABSTRAKSI: Kata Kunci : ABSTRACT: At this time road users in major cities of Indonesia requires some information about traffic density and because of the growing period, the number of vehicles users will increase and this will also cause traffic congestion levels are higher as well. To obtain information system about the traffic density, some video samples have been taken to describe the road conditions in traffic jam, dense, medium, and smooth.In this final project, the author uses the method of Support Vector Machine (SVM) that growing rapidly in pattern recognition. The carried out proccess to identify the traffic conditions on the road is a video capture and data on the road, pre-processing, feature extraction and classification of road traffic conditions. The algorithm used for feature extraction vehicle is Independent Component Analysis, while for the classification of texture characteristics of roads author will use SVM.The results are shown as the classification of the traffic conditions which are divided into classes each. And this system also can recognize the pattern of road traffic conditions and can identify any particular type of road traffic conditions. Designed system can achieve 100% accuracy rate in identifying image conduct road traffic by using Support Vector Machine (SVM) and Independent Component Analysis (ICA).Keyword: Traffic Density, Independent Component Analysis (ICA), Support Vector Machine(SVM
Pemeliharaan dan Perawatan Bangunan Gedung dalam Masa Pemeliharaan dan Analisa Kerusakannya (Studi Kasus Proyek Pembangunan Gedung Kuliah dan Laboratorium Informatika USU)
Get PDF60 HlmPemeliharaan bangunan gedung adalah kegiatan menjaga keandalan bangunan gedung
beserta prasarana dan sarananya agar bangunan gedung selalu layak fungsi, sedangkan
kegiatan perawatan bangunan gedung adalah kegiatan memperbaiki dan/ atau mengganti
bagian bangunan gedung, komponen, bahan bangunan, dan/ atau prasarana dan sarana
agar bangunan gedung tetap layak fungsi.
Oleh sebab itu penelitian ini dilakukan dengan tujuan mendapatkan jenis-jenis
kerusakan/ kekurangan yang kerap terjadi pada elemen bangunan gedung dalam masa
pemeliharaan. Cara penelitian yang dilakukan adalah dengan melakukan riset ke
perusahaan PT. Budigraha Perkasa Utama untuk memperoleh data pekerjaan yang sudah
dikerjakan dimana data tersebut mencantumkan nama pekerjaan dan jenis-jenis
kerusakannya serta mengalisanya. Selain menganilisa data pengalaman perusahaan,
penulis juga melakukan wawancara kepada tenaga teknik perusahaan dan mengamati
pekerjaan bangunan gedung yang sedang dalam masa pemeliharaan guna mendapatkan
manajemen pemeliharaan dan perawatan bangunan gedung.
Dari hasil pengamatan dilapangan dan analisa data yang didapat dari PT. Budigraha
Perkasa Utama maka diperoleh kerusakan-kerusakan yang kerap terjadi pada masa
pemeliharaan bangunan gedung adalah item pekerjaan plambing dan peralatan sanitair,
item tersebut kondisinya selalu basah maka ditekankan lebih berhati-hatilah
mengerjakan item tersebut. Maintenance of buildings is an activity to maintain the reliability of its infrastructure
building and the ingredients for building always feasible function, whereas building
maintenance activity is the activity of repair and replace parts of the building,
components, building materials, and facilities and infrastructure for permanent
buildings proper function.
Therefore this study was conducted in order to get the type-the type of damage that
often occur in the building element in the maintenance period. How the research is to
conduct research into the company of PT. Budigraha Perkasa Utama to obtain data on
the work already done where the data includes the name of the job and the type the type
of damage and analisis. In addition to data analisis corporate experience, the author
also did an interview the company's technical staff and observe the work of building that
are in a period of maintenance in order to obtain maintenance management and building
maintenance.
From the results of field observations and analysis of data obtained from the PT.
Budigraha Perkasa Utama then obtained damages that often occurs during maintenance
of buildings is plumbing work items and equipment sanitation, the item condition is
always wet so stressed more circumspect-careful work on the item
Analisa Penggunaan Foam Agent sebagai Bahan Dasar Pembuatan Bata Ringan
Get PDFPenelitian yang dilakukan terhadap bata ringan merupakan salah satu hal yang penting untuk dikembangkan dan diteliti lebih lanjut. Tetapi dalam penelitian perlu adanya pemilihan bahan-bahan yang akan digunakan, karena penelitian bata ringan sangat bergantung kepada pemilihan bahan yang tepat. Bata ringan yang dihasilkan juga harus sesuai dengan kebutuhan, spesifikasi teknis dan daya tahan yang kuat, pemakaiannya dalam konstruksi dan juga ramah lingkungan. Penelitian ini bertujuan untuk memberikan bahan-bahan yang dapat digunakan dalam proses pembuatan bata ringan, dan dengan variasi-variasi jumlah foam agent yang berbeda. Peneliti menggunakan variasi standar yang disajikan NEOPOR yang selanjutnya digunakan sebagai acuan mix-design dan penambahan campuran 30% untuk sampel 2 dan 60% untuk sampel 3.
Pada penelitian ini penulis menggunakan bahan foaming agent dalam campuran beton yang akan membuat beton menjadi ringan. Hal ini dapat dilihat dalam pembuatan benda uji kubus bata ringan. Pada komposisi semen: pasir: foam: air sebesar 1: 1,25: 0,004: 0,53 menghasilkan kuat tekan rata-rata sebesar 14,254 kg/cm2 dengan berat rata-rata 2,5102 kg; Pada komposisi semen: pasir: foam: air sebesar 1,3: 1,625: 0,0052: 0,689 menghasilkan kuat tekan rata-rata sebesar 10,21 kg/cm2 dengan berat rata-rata 2,213 kg; Pada komposisi semen: pasir: foam: air sebesar 1,6: 2,0: 0,0064: 0,84 menghasilkan kuat tekan rata-rata sebesar 6,561 kg/cm2 dengan berat rata-rata 2,079 kg.
Dari penelitian yang dilakukan, maka penulis dapat menghasilkan bata ringan yang dapat memenuhi standar kuat tekan yang dijadikan acuan menurut tjokrodimuljo yaitu pada nilai density 240-800 kg/m3 kuat tekan bata ringan berkisar 0,35-7 Mpa (3,569- 71 kg/cm2).Research conducted on lightweight brick is one of the things that need to be developed and researched further. But in studies need for election materials to be used, because the light brick research relies heavily on the selection of appropriate materials. Light brick produced must also comply with the requirements, technical specifications and durability, its use in construction and also environmentally friendly. This study aims to present materials that can be used in the manufacture of lightweight brick, and with different variations and also examines the characteristics of light brick. Researchers used a standard variation presented Neopor which is then used as a reference mix-design and the addition of a mixture of 30% for sample 2 and 60% for 3 samples. In this study, the authors use a foaming agent material in the concrete mixture that will make the concrete lighter. This can be seen in the manufacture of lightweight brick cube specimen. On the composition of cement: sand: foam: water 1: 1.25: 0.004: 0.53 generate an average compressive strength of 14.254 kg / cm2 with an average weight of 2.5102 kg; On the composition of cement: sand: foam: water of 1.3: 1.625: 0.0052: 0.689 generate an average compressive strength of 10.21 kg / cm2 with an average weight of 2,213 kg; On the composition of cement: sand: foam: water of 1.6: 2.0: 0.0064: 0.84 resulted in an average compressive strength of 14.254 kg / cm2 with an average weight of 2,079 kg. By this research the author can produced brick light that can meet the standards of the compressive strength of the referenced according tjokrodimuljo that the density value of 240-800 kg / m3 light brick compressive strength ranges from 0.35 to 7 MPa (3,569- 71 kg / cm2)
Analisis Perbandingan Biaya dan Waktu Pelaksanaan Pondasi Spun Pile dengan Bore Pile pada Proyek Masjid Agung
Get PDFPenelitian ini bermaksud untuk membandingkan biaya dan waktu yang
dibutuhkan untuk pelaksanaan pekerjaan pondasi spun pile dengan pondasi bore
pile. Dengan tujuan untuk mengetahui apakah biaya dan waktu pelaksananan yang
direncanakan memiliki efisiensi yang sama atau tidak. Penelitian ini membahas
perbandingan pondasi spun pile dan bore pile pada seksi 11, 12, 13 dengan asumsi
beban yang diterima dari satu grup spun pile dan satu grup bore pile menerima
beban yang sama, untuk analisis biaya dan waktu pelaksanaan penulis akan
menganalisis pada 6 lokasi.
Peran pondasi pada pembangunan struktur awal gedung menjadi sangat penting.
Pemilihan jenis pondasi yang sesuai akan melancarkan proses pekerjaan gedung,
sehingga perlu perencanaan yang baik, meliputi biaya dan waktu pelaksanan.
Pondasi yang dijadikan alternatif adalah pondasi dalam, yaitu pondasi spun pile
dan pondasi bore pile. Peneltian ini menganalisis untuk 1 pile cap terdapat 4 pile
pada 6 lokasi yang berbeda.
Penelitian ini menyimpulkan bahwa berdasarkan analisis biaya dan waktu
pelaksanan pondasi spun pile dan pondasi bore pile yang di teliti, maka hasil dari
analisis waktu untuk pondasi spun pile membutuhkan waktu 16 hari dan pondasi
bore pile 48 hari. Berdasarkan analisis biaya, pondasi spun pile membutuhkan
anggaran biaya sebesar Rp. 275.198.220,00 sedangkan pondasi bore pile sebesar
Rp. 498.887.437,00 Analisis biaya dan waktu pelaksanaan pondasi yang paling
tepat dan dapat diaplikasikan dalam pekerjaan gedung Masjid Agung tersebut
ialah pondasi spun pile, karena waktu pengerjaan relatif lebih cepat dan biaya
lebih murah. Sedangkan penggunaan pondasi bore pile dibutuhkan karena lokasi
pemancangan pondasi terhempit dengan lokasi bangunan lain, maka digunakan
alternatif lain yaitu pondasi bore pile.This study intends to compare the costs and time needed to carry out the work of
the spun pile foundation with bore pile foundation. With the aim of knowing
whether the planned costs and implementation time have the same efficiency or
not. This study discusses the comparison of spun pile and bore pile foundations in
sections 11, 12, 13 with the assumption that the load received from one spun pile
group and one bore pile group receives the same load, for the cost analysis and
execution time the author will analyze at 6 locations.
The role of the foundation in building the initial structure of the building is very
important. The selection of the appropriate type of foundation will expedite the
process of building work, so that good planning is needed, including costs and
implementation time. The foundation that is used as an alternative is the deep
foundation, the spun pile foundation and bore pile foundation. This study
analyzed for 1 pile cap, there were 4 piles in 6 different locations.
This study concludes that based on the analysis of the cost and time of
implementation of the spun pile foundation and the bore pile foundation that was
examined, the results of the time analysis for the spun pile foundation needed 16
days and a 48-day bore pile foundation. Based on the cost analysis, the spun pile
foundation requires a budget of Rp. 275,198,220.00 while the bore pile
foundation is Rp. 489,887,437.00. Cost and time analysis of the implementation of
the most appropriate foundation and can be applied in the work of the Great
Mosque building is the foundation of spun pile, because the processing time is
relatively faster and cheaper. Whereas the use of bore pile foundation is needed
because the location of foundation foundation is narrowed with the location of
other buildings, then another alternative is the bore pile foundation
Pelaksanaan Pemberian Izin Cuti Melahirkan Berdasarkan Peraturan Pemerintah No.11 Tahun 2017 Terhadap Kinerja Aparatur Sipil Negara Di Lingkungan Dinas Pemberdayaan Perempuan, Perlindungan Anak, Pengendalian Penduduk Dan Keluarga Berencana (DP3AP2KB) Provinsi Riau.
Get PDFGovernment Regulation of the Republic of Indonesia No. 11 of 2017 concerning Management of Civil Servants regulates maternity leave for Civil Servants (women) one and a half months before giving birth and one and a half months after giving birth and if totaled three months and entitled to a salary and allowances. This study aims to determine how the process of taking maternity leave permits on the performance of the State Civil Apparatus (ASN) according to Government Regulation No. 11 of 2017 and obstacles for State Civil Apparatus in taking maternity leave permission. The method used by the author in this study is the legal method of observational research, namely by surveying or observing directly to the research location using data collection tools, namely interviews with the secretary, Ms. Yanita Rahmi, Ms. Puspalinen, Ms. Syarifah Khairani, at the Office of Women's Empowerment, Child Protection, Population Control and Family Planning (DP3AP2KB) Riau Province. While the nature of this research is descriptive, namely the author tries to give a detailed description. Namely describing the problems found to be related to each other in a logical and juridical way to get a clear and detailed picture of the Implementation and Constraints of maternity leave permission. From the results of the study, the implementation of maternity leave at the Office of Women's Empowerment, Child Protection, Population Control and Family Planning in Riau Province was in accordance with Government Regulation Number 11 of 2017 concerning Management of Civil Servants. Based on the results of research on constraints in implementing maternity leave permits for civil servants (women), there are no obstacles. But there needs to be a renewal of Government Regulation No. 11 of 2017 concerning Management of Civil Servants which does not regulate maternity leave permits, within a period of 1 year 2 times of course there will be special obstacles in applying for leave so that there is a need for renewal in order to provide certainty and protection of the rights of Civil Servants Civil (female)
Kitap kapağı tasarımının ilkeleri bağlamında dünya klasikleri
Get PDFİnsan yaşayışı boyunca çevresindeki dünya ile iletişim içindedir. Görmekte olduğumuz her şey bir iletişimle anlamlandırılır ve iletişim kurmak için şekillenir. Görsel iletişim hayatınızın büyük bir bölümünde bize eşlik eder. Bu noktada her ürün alıcı için görsel bir yarış içindedir. Bir görsel iletişim ürünü olan kitap kapağı da bunlardan biridir. Kitabı bir arada tutan ve koruyan kitap kapağı, bu işlevinin yanı sıra kültürel olarak zenginleşen ve gelişen dünyamızda, alıcı için dikkati kendi üzerinde toplayabilme ve kalıcı bir iletişim kurabilme görevini de üstlenmektedir. Kitap kapağı okuyucuya kitap içeriği hakkında merak uyandırabilen, içeriğini sezdirebilen, görselliğiyle ilgi uyandırabilen, kitabın tanıtımını yapabilen bir görsel iletişim ürünüdür. Tek başına ve bir diziyi oluşturan haliyle kitap kapağı, yazar ve yayınevini okuyucu için cazip hale getirmesi noktasında önemlidir. İnsan zihni görsel olarak kendisinde ilgi uyandıran ve birbiriyle uyumluluk oluşturan parçaları bir arada görme ve onları takip etme eğilimindedir. Bu davranış okuyucuyu aynı yayınevinin birbiriyle uyumlu ve görsel olarak tanıdık gelen kitaplarına yönlendirir ve yayınevine sürekli okuyucu kazandırır. Yazar açısından ise okuyucuya kitapta anlatmak istediklerini görsel olarak ifade etme ve üslubunu aktarma açısından destek olur. Bu tezde kitap kapağı bahsi geçen işlevleriyle anlatılmış görsel süreklilik oluşturan tasarım ögeleri sayesinde oluşan uyum dünya klasikleri üzerinden incelenmiştir. Bir okuyucuyu aynı yayınevinin birbiriyle uyumlu ve görsel olarak tanıdık kitap kapaklarına sahip kitapları tercih etmesine yönlendiren bu unsur aynı zamanda yayınevi için sürekli okuyucular kazandırmaktadır. Yazar açısından ise okuyucuya anlatmak istediği düşünceyi ifade etmesi ve üslubunu görsel olarak ifade edebilmesini sağlayabilen kitap kapağı, tezde bu işlevleriyle anlatılmış ve görsel süreklilik oluşturan tasarım ögeleri ile oluşturulan bu uyum dünya klasikleri üzerinden incelenmiştir.Man is in communication with the world through his life. In seeing, his things are explained by a communication and made sense for communication. Most of the visual communication services are told to us. It is in a visual race for the buyer of this product. Book covers, which are a visual communication, are one of them. Recipients who hold together and consist of books, as well as the enriched and useful world, can also take on the task of being able to focus on themselves and to act as a communicator. A book is a visual communication product that can arouse curiosity about the reader, arouse interest with its visuality, and promote the book. It is important that the book covers, which are stand-alone and form a series, can be introduced to the reader by the author and the publisher. It aims to arouse interest and interest in human visuality. This pleasant reader was directed to the publisher's regular and visually appealing books. If you read the author, it would be to express your appreciation and support. In this thesis, the book covers are made up of design elements that create visual permanence, which are explained in a small way, through world classics. Prefer a reader to the books of the same publisher, book by book, book by book, book by book. The author can tell the classics in this world, whose covers are prepared with this narrated and continuity design, which can visually tell the book reader what they can tell the expression and style
Sistem Informasi Monitoring Project Studi Kasus PT. Subang Sejahtera Teknologi Informasi
Get PDFSistem informasi monitoring project adalah sebuah sistem yang dibuat yang diharapkan dapat membantu perusahaan dalam memantau perkembangan project dengan lebih baik, menggunakan teknologi informasi. Dengan sistem informasi monitoring project perusahaan bisa mengumpulkan informasi project dari berbagai sumber, memberikan gambaran jelas tentang kemajuan project, dan menggantikan cara manual yang sebelumnya digunakan. Tujuan penelitian ini adalah untuk mengembangkan sebuah sistem informasi monitoring project yang dapat membantu PT. Subang Sejahtera Teknologi Informasi dalam mengelola dan memantau proyek-proyek yang sedang berlangsung.Untuk mengembangkan sistem ini peneliti menggunakan metode Rational Unified Process (RUP) dengan melibatkan tahap-tahap literatif RUP seperti inception, elaboration, dan construction. Sistem Informasi Monitoring Project ini mencakup modul-modul seperti manajemen tugas, pemantauan progres proyek, dan pelaporan. Integrasi data dari berbagai departemen dan pembaruan secara real-time memungkinkan pemangku kepentingan untuk memantau proyek dengan lebih efektif
Comparing Cryo-EM Reconstructions and Validating Atomic Model Fit Using Difference Maps
No full textCryogenic electron microscopy (cryo-EM) is a powerful technique for determining structures of multiple conformational or compositional states of macromolecular assemblies involved in cellular processes. Recent technological developments have led to a leap in the resolution of many cryo-EM data sets, making atomic model building more common for data interpretation. We present a method for calculating differences between two cryo-EM maps or a map and a fitted atomic model. The proposed approach works by scaling the maps using amplitude matching in resolution shells. To account for variability in local resolution of cryo-EM data, we include a procedure for local amplitude scaling that enables appropriate scaling of local map contrast. The approach is implemented as a user-friendly tool in the CCP-EM software package. To obtain clean and interpretable differences, we propose a protocol involving steps to process the input maps and output differences. We demonstrate the utility of the method for identifying conformational and compositional differences including ligands. We also highlight the use of difference maps for evaluating atomic model fit in cryo-EM maps.BN/Arjen Jakobi La
KEABSAHAN PERKAWINAN YANG DILAKUKAN PADA MASA IDDAH STUDI KASUS PENGADILAN AGAMA NGAMPRAH NOMOR 1519
No full textMarriage is regulated in Law Number 1 of 1974 as a physical and mental bond between a man and a woman as husband and wife with the aim of forming a happy and eternal family based on God Almighty. In marriage there is also a divorce and to continue marriage after a divorce there are conditions that must be met, one of which is the provision of iddah.
This research uses the Normative Juridical method, the case study approach is used to analyze the problems contained in this research. The data collection technique uses literature (Library research), namely the study of written information about the law from various sources needed for normative legal research, which will then be compiled and analyzed for further management in a descriptive analysis.
Based on the results of this research, the author concludes that marriage during the iddah period is invalid and results in hidden zina in terms of Indonesian positive law and Islamic fiqh, we as Muslims must always obey the laws that Allah has set in this case, namely regarding the iddah period.
 
