1,721,084 research outputs found
Performance tests of ITER CS conductor samples from series production
The International Thermonuclear Experimental Reactor (ITER) magnet system is one of the most sophisticated superconducting magnet systems ever designed, with a stored energy of 51 GJ. The coils are wound from cable-in-conduit conductors made of superconducting and copper strands assembled into a multistage rope-type cable, inserted into a conduit of austenitic steel tubes. The ITER central solenoid (CS) works in pulsed mode, reaching a peak field of 13 T, thus allowing the induction of a high intensity current in the plasma of the ITER tokamak. This magnet consists of a stack of six modules which include around 125 t of NbSn strands. The production of all CS conductors has been completed and module manufacturing is well underway; throughout the production phase, samples were cut at the extremities of the conductor unit lengths to undergo quality control tests. About 25% of the conductor short samples were tested in current and field at cryogenic conditions at the SULTAN facility in Villigen, Switzerland. This work reports the comparative analysis of the short samples set of test results
Calculation method for pulsed magnetic field energy supplied to Nb3Sn ITER CS conductors during SULTAN stability tests
Cable-In-Conduit Conductors (CICCs) for the ITER Central Solenoid (CS) magnets are designed to operate in the presence of fast changing current and magnetic field during the plasma-operating scenario. For ITER, the AC loss of several types of Nb3Sn CICCs was experimentally tested, but only very limited experimental data is available for quantitative analysis of the minimum quench energy (MQE). In the SULTAN testing facility (Swiss Plasma Centre) few CS conductors were tested on MQE, but the magnetic field amplitude and ramp rate settings are far from the actual ITER operating conditions. Nevertheless, such tests are needed as a basis to calibrate and benchmark the codes that describe the quench behavior. Moreover, during the stability tests in Sultan, the temperature measurements show severe fluctuations, which can introduce a large error for the energy calculation. An interpretation is given for the temperature fluctuation and a procedure is proposed to significantly reduce the error in the pulsed energy calculation
Going Beyond Counting First Authors in Author Co-citation Analysis
The present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
We provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
We conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
We have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
Analysis of AC Losses in a CS Conductor Sample for the ITER Project
The cable-in-conduit conductors (CICCs) that will be adopted for the ITER central solenoid (CS) coil of the ITER machine have been extensively characterized in the SULTAN facility in Villigen, Switzerland, by means of DC and AC tests. The AC measurements were performed superimposing a sinusoidal magnetic field, with the amplitude of 0.2-0.3 T and frequency in the range of 0.1-5 Hz, to a background constant magnetic flux density of 2 T and 9 T. This paper describes the analysis of the AC loss SULTAN tests of one CICC, identical to that used for the manufacturing of the CS Insert tested in 2015 in the CSMC facility in Naka, Japan. The numerical analysis of these experiments was performed by means of the THELMA code, by developing three models at different levels of discretization (sub-cables of different cabling stages and strands). The comparison between measured and computed losses allows one to estimate the interstrand contact conductances of the tested sample. The model provides a useful insight on the time and space distribution of the power dissipated in the conductor
- …
