169,958 research outputs found
Abelhas STEM: trabalho interdisciplinar entre a matemática e as ciências para a exploração da forma do favo
No full textEm 2021, no número 159 da Revista Educação e Matemática,
publicámos um artigo intitulado Abelhas STEM: Uma proposta
de trabalho interdisciplinar entre a matemática e as ciências no
2.º ciclo (Cavadas et al., 2021). Nesse artigo foi apresentado o
relato de uma proposta de trabalho interdisciplinar, envolvendo
a Matemática e as Ciências Naturais, que consistiu na exploração
das características dos alvéolos de um favo (figura 1), baseada
numa análise a duas dimensões, de modo a serem identificadas as
vantagens da forma hexagonal que se observa nos alvéolos. Essa
proposta de trabalho foi concretizada com alunos do 2.º ciclo.
O presente artigo centra-se na segunda parte da proposta de
trabalho Abelhas STEM, dando assim continuidade ao anterior.
É agora apresentada a exploração da forma tridimensional dos
alvéolos, para se melhor compreender a estrutura do favo
Going Beyond Counting First Authors in Author Co-citation Analysis
No full textThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Effect of the two-wall-stitch mistake upon patency of rat femoral vein anastomosis: Preliminary observations
No full textAnastomotic patency is believed to be the most important factor in microvascular surgery. The two-wall stitch is a technical error commonly considered to cause thrombosis of the anastomosis, especially on the venous side. In order to demonstrate the real effect on vein patency of the two-wall stitch, the authors performed a standardized mistake after correct microanastomosis on the femoral vein of 15 rats, with one stitch passing through the whole thickness of the two walls of the vein. Traditional correct anastomoses on the contralateral side were used as controls. Patency was assessed at 5, 20, and 60 min and at 24 h by the milking test, and by direct section of the vessel at 24 h. The results showed no statistically significant difference between the two techniques. Histological examination confirmed the clinical judgment about the vessel’s patency, and ultrastructural microscopy evidenced only mild signs of endothelial activation. In conclusion, this study indicates that the occasional two-wall stitch does not necessarily increase the risk of venous occlusion in anastomoses of the rat femoral vein
Mitomycin C in highly myopic eyes - Author reply
No full textOphthalmology. 2005 Feb;112(2):208-18; discussion 219.
Mitomycin C modulation of corneal wound healing after photorefractive keratectomy in highly myopic eyes.
Gambato C, Ghirlando A, Moretto E, Busato F, Midena E.
SourceRefractive Surgery Service and Antimetabolite Therapy Research Unit, Department of Ophthalmology, University of Padova, Padova, Italy.
Abstract
PURPOSE: To evaluate the role of topical mitomycin C in corneal wound healing (CWH) after photorefractive keratectomy (PRK) in highly myopic eyes.
DESIGN: Prospective, double-masked, randomized clinical trial.
PARTICIPANTS: Seventy-two eyes of 36 patients affected by high (>7 diopters) myopia.
METHODS: In each patient, one eye was randomly assigned to PRK with intraoperative topical 0.02% mitomycin C application, and the fellow eye was treated with a placebo. Postoperatively, mitomycin C-treated eyes received artificial tears (3 times daily, tapered in 3 months), whereas the fellow eye was treated with fluorometholone sodium 2% and artificial tears (3 times daily, tapered in 3 months).
MAIN OUTCOME MEASURES: Uncorrected visual acuity (UCVA) and best-corrected visual acuity (BCVA), contrast sensitivity, manifest refraction, and biomicroscopy. Contrast sensitivity was determined using the Pelli-Robson chart. Corneal confocal microscopy documented CWH.
RESULTS: Mean follow-up was 18 months (range, 12-36). No side effects or toxic effects were documented. At 12-month follow-up examination, UCVAs (logarithm of the minimum angle of resolution) were 0.4+/-0.48 and 0.5+/-0.53 (P = .03) in mitomycin C-treated eyes and corticosteroid-treated eyes, respectively. At 1 year, corneal haze developed in 20% of corticosteroid-treated eyes, versus 0% of mitomycin C-treated eyes. At 12, 24, and 36 months, corneal confocal microscopy showed activated keratocytes and extracellular matrix significantly more evident in untreated eyes (Ps = 0.004, 0.024, and 0.046, respectively).
CONCLUSION: Topical intraoperative application of 0.02% mitomycin C can reduce haze formation in highly myopic eyes undergoing PRK.
Comment in
Ophthalmology. 2006 Feb;113(2):357; author reply 357-8
Damage detection using data-driven methods applied to moving-load responses
No full textDeveloped economies depend on complex and extensive systems of infrastructure to maintain economic prosperity and quality of life. In recent years, the implementation of Structural health monitoring (SHM) systems on full-scale bridges has increased. The goal of these systems is to inform owners of the condition of structures, thereby supporting surveillance, maintenance and other management tasks. Data-driven methods, that involve tracking changes in signals only, are well-suited for analyzing measurements during continuous monitoring of structures. Also, information provided by the response of structures under moving loads is useful for condition assessment. This paper discusses the application of data-driven methods on moving-load responses in order to detect the occurrence and the location of damage. First, an approach for using moving-load responses as time series data is proposed. The work focuses on two data-driven methods - Moving principal component analysis (MPCA) and Robust regression analysis (RRA) - that have already been successful for damage detection during continuous monitoring. The performance of each method is assessed using data obtained by simulating the crossing of a point-load on a simple frame. (C) 2013 Elsevier Ltd. All rights reserved.IMA
Dispelling the Myths Behind First-author Citation Counts
No full textWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
A Multi-Language Comparison of Influences on Author Verification using Character N-Grams
No full textWe create a new multi-language corpus for author verification based on Wikipedia talkpages, and evaluate the influence that differences in topic and time have on character n-gram author profiles. Topic alignment between two texts is found to increase author verification precision, and an authors writing style is found to change over time, but not more significantly after 3 years than after 1 year.Information ArchitectureWISElectrical Engineering, Mathematics and Computer Scienc
A 0.12mm<sup>2</sup> Wien-Bridge Temperature Sensor with 0.1°C (3σ) Inaccuracy from -40°C to 180°C
No full text Resistor-based temperature sensors can achieve much higher resolution and energy efficiency than conventional BJT-based sensors [1], but they typically occupy more area (> 0.25 mm 2 ) and have lower operating temperatures (le 125 {circ} {C}) [2]-[4]. This work describes a 0.12mm 2 resistor-based sensor that uses a Wien-bridge (WB) filter to achieve 0.1 {circ} {C} (3 sigma) inaccuracy from - 40 {circ} {C} to 180 {circ} {C}. Compared to a state-of-the-art WB sensor [4], it occupies 6 × less area and achieves comparable relative accuracy over a 76% wider operating range. Session 10.3 Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic InstrumentationMicroelectronic
A ±25A Versatile Shunt-Based Current Sensor with 10kHz Bandwidth and ±0.25% Gain Error from -40°C to 85°C Using 2-Current Calibration
No full textAccurate current sensing is critical in many industrial applications, such as battery management and motor control. Precise shunt-based current sensors have been reported with gain errors of less than 1% over the industrial temperature range (-40°C to 85°C) [1]–[4]. However, since they are intended for coulomb counting, their bandwidth is limited to a few tens of Hz, making them unsuitable for battery impedance or motor-current sensing. This paper presents a current sensor with a wide (10kHz) bandwidth and a tunable temperature compensation scheme (TCS), which allows it to be flexibly used with different types of shunts while maintaining high accuracy. A low-cost room-temperature calibration scheme is proposed to optimize gain flatness over temperature by exploiting the shunt's self-heating at large currents. Over the industrial temperature range and a ±25A current range, it achieves state-of-the-art gain error (±0.25%) with both low-cost PCB and stable metal-alloy shunts.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic InstrumentationMicroelectronic
An Article About Albertus C. Van Raalte, Author Unknown, Except for Parts Taken from an Article by Anna C. Post
No full textAn article about Albertus C. Van Raalte, author unknown, except for parts taken from an article by Anna C. Post. The author knew first generation persons in the Holland settlement and therefore, the article has some value.https://digitalcommons.hope.edu/vrp_1890s/1012/thumbnail.jp
- …
