196,200 research outputs found
Including copy number variation in association studies to predict genotypic values
No full textThe objective of this study was to investigate, both empirically and deterministically, the ability to explain genetic variation resulting from a copy number polymorphism (CNP) by including the CNP, either by its genotype or by a continuous derivation thereof, alone or together with a nearby single nucleotide polymorphism (SNP) in the model. This continuous measure of a CNP genotype could be a raw hybridization measurement, or a predicted CNP genotype. Results from simulations showed that the linkage disequilibrium (LD) between an SNP and CNP was lower than LD between two SNPs, due to the higher mutation rate at the CNP loci. The model R2 values from analysing the simulated data were very similar to the R2 values predicted with the deterministic formulae. Under the assumption that x copies at a CNP locus lead to the effect of x times the effect of 1 copy, including a continuous measure of a CNP locus in the model together with the genotype of a nearby SNP increased power to explain variation at the CNP locus, even when the continuous measure explained only 15% of the variation at the CNP locus
Comparison of analyses of the QTLMAS XIII common dataset. II: QTL analysis
No full textBackground - Five participants of the QTL-MAS 2009 workshop applied QTL analyses to the workshop common data set which contained a time-related trait: cumulative yield. Underlying the trait were 18 QTLs for three parameters of a logistic growth curve that was used for simulating the trait. Methods - Different statistical models and methods were employed to detect QTLs and estimate position and effect sizes of QTLs. Here we compare the results with respect to the numbers of QTLs detected, estimated positions and percentage explained variance. Furthermore, limiting factors in the QTL detection are evaluated. Results - All QTLs for the asymptote and the scaling factor of the logistic curve were detected by at least one of the participants. Only one out of six of the QTLs for the inflection point was detected. None of the QTLs were detected by all participants. Dominant, epistatic and imprinted QTLs were reported while only additive QTLs were simulated. The power to map QTLs for the inflection point increased when more time points were added. Conclusions - For the detection of QTLs related to the asymptote and the scaling factor, there were no strong differences between the methods used here. Also, it did not matter much whether the time course data were analyzed per single time point or whether parameters of a growth curve were first estimated and then analyzed. In contrast, the power for detection of QTLs for the inflection point was very low and the frequency of time points appeared to be a limiting factor. This can be explained by a low accuracy in estimating the inflection point from a limited time range and a limited number of time points, and by the low correlation between the simulated values for this parameter and the phenotypic data available for the individual time point
Accuracy of multi-trait genomic selection using different methods
No full textAbstract Background Genomic selection has become a very important tool in animal genetics and is rapidly emerging in plant genetics. It holds the promise to be particularly beneficial to select for traits that are difficult or expensive to measure, such as traits that are measured in one environment and selected for in another environment. The objective of this paper was to develop three models that would permit multi-trait genomic selection by combining scarcely recorded traits with genetically correlated indicator traits, and to compare their performance to single-trait models, using simulated datasets. Methods Three (SNP) Single Nucleotide Polymorphism based models were used. Model G and BCπ0 assumed that contributed (co)variances of all SNP are equal. Model BSSVS sampled SNP effects from a distribution with large (or small) effects to model SNP that are (or not) associated with a quantitative trait locus. For reasons of comparison, model A including pedigree but not SNP information was fitted as well. Results In terms of accuracies for animals without phenotypes, the models generally ranked as follows: BSSVS > BCπ0 > G > > A. Using multi-trait SNP-based models, the accuracy for juvenile animals without any phenotypes increased up to 0.10. For animals with phenotypes on an indicator trait only, accuracy increased up to 0.03 and 0.14, for genetic correlations with the evaluated trait of 0.25 and 0.75, respectively. Conclusions When the indicator trait had a genetic correlation lower than 0.5 with the trait of interest in our simulated data, the accuracy was higher if genotypes rather than phenotypes were obtained for the indicator trait. However, when genetic correlations were higher than 0.5, using an indicator trait led to higher accuracies for selection candidates. For different combinations of traits, the level of genetic correlation below which genotyping selection candidates is more effective than obtaining phenotypes for an indicator trait, needs to be derived considering at least the heritabilities and the numbers of animals recorded for the traits involved.</p
A comparison of principal component regression and genomic REML for genomic prediction across populations
No full textBackground: Genomic prediction faces two main statistical problems: multicollinearity and n ≪ p (many fewer observations than predictor variables). Principal component (PC) analysis is a multivariate statistical method that is often used to address these problems. The objective of this study was to compare the performance of PC regression (PCR) for genomic prediction with that of a commonly used REML model with a genomic relationship matrix (GREML) and to investigate the full potential of PCR for genomic prediction. Methods: The PCR model used either a common or a semi-supervised approach, where PC were selected based either on their eigenvalues (i.e. proportion of variance explained by SNP (single nucleotide polymorphism) genotypes) or on their association with phenotypic variance in the reference population (i.e. the regression sum of squares contribution). Cross-validation within the reference population was used to select the optimum PCR model that minimizes mean squared error. Pre-corrected average daily milk, fat and protein yields of 1609 first lactation Holstein heifers, from Ireland, UK, the Netherlands and Sweden, which were genotyped with 50 k SNPs, were analysed. Each testing subset included animals from only one country, or from only one selection line for the UK. Results: In general, accuracies of GREML and PCR were similar but GREML slightly outperformed PCR. Inclusion of genotyping information of validation animals into model training (semi-supervised PCR), did not result in more accurate genomic predictions. The highest achievable PCR accuracies were obtained across a wide range of numbers of PC fitted in the regression (from one to more than 1000), across test populations and traits. Using cross-validation within the reference population to derive the number of PC, yielded substantially lower accuracies than the highest achievable accuracies obtained across all possible numbers of PC. Conclusions: On average, PCR performed only slightly less well than GREML. When the optimal number of PC was determined based on realized accuracy in the testing population, PCR showed a higher potential in terms of achievable accuracy that was not capitalized when PC selection was based on cross-validation. A standard approach for selecting the optimal set of PC in PCR remains a challenge
Comparison of analyses of the QTLMAS XIV common dataset. I: genomic selection
No full textBackground - For the XIV QTLMAS workshop, a dataset for traits with complex genetic architecture has been simulated and released for analyses by participants. One of the tasks was to estimate direct genomic values for individuals without phenotypes. The aim of this paper was to compare results of different approaches used by the participants to calculate direct genomic values for quantitative trait (QT) and binary trait (BT). Results - Participants applied 26 approaches for QT and 15 approaches for BT. Accuracy for QT was between 0.26 and 0.89 for males and between 0.31 and 0.89 for females, and for BT ranged from 0.27 to 0.85. For QT, percentage of lost response to selection varied from 8% to 83%, whereas for BT the loss was between 15% and 71%. Conclusions - Bayesian model averaging methods predicted breeding values slightly better than GBLUP in a simulated data set. The methods utilizing genomic information performed better than traditional pedigree based BLUP analyses. Bivariate analyses was slightly advantageous over single trait for the same method. None of the methods estimated the non-additivity of QTL affecting the QT, which may be one of the constrains in accuracy observed in real data. -------------------------------------------------------------------------------
Dr. Duane M. Jackson, Morehouse College, July 2011
No full textThis video is a conversation with Dr. Duane M. Jackson. Dr. Jackson talks about his paper, "Recall and the Serial Position Effect: The Role of Primacy and Recency on Accounting Students' Performance." Jackie Daniel, AUC Woodruff Library, is the interviewer
"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States" By M. Carey.
No full text"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States: containing bried sketches of the moral and political character of those states.
By M. Carey, member of the American philosophical, and of the American Antiquarian Society, and author of The Olive Branch, Cindiciae Hibernicae, essays on banking, on political economy, and on internal improvement.
To which are now added the English editor's comments on the subject; together with Important Advice to Emigrants, and Cautions Against Impositions Practiced in the Outports
Dispelling the Myths Behind First-author Citation Counts
No full textWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
- …
