Repozytorium UW
Not a member yet
    2396 research outputs found

    The influence of temperature on hydrogen electrosorption into palladium alloys with rhodium

    No full text
    Celem niniejszej pracy było opracowanie warunków elektroosadzania Pd i stopów Pd-Rh oraz zbadanie procesu elektrosorpcji wodoru z roztworów kwasowych w tych materiałach, ze szczególnym uwzględnieniem wpływu potencjału elektrody, składu stopu oraz temperatury. Badania obejmowały otrzymanie stopów Pd-Rh w postaci elektrod o ograniczonej objętości (LVE), czyli cienkich warstw osadzonych na podłożu przewodzącym oraz scharakteryzowanie ich metodami elektrochemicznymi: chronoamperometrią (CA) i chronowoltamperometrią cykliczną (CV) oraz technikami fizykochemicznymi: skaningową mikroskopią elektronową (SEM) z mikroanalizą rentgenowską (EDS), spektroskopią elektronów Augera (AES), rentgenowską spektrometrią fotoelektronów (XPS), dyfrakcją rentgenowską (XRD) oraz atomową spektroskopią emisyjną (ASE). Otrzymane i przebadane zostały stopy Pd-Rh w zakresie objętościowej zawartości palladu 60–97,3% at. przy wartościach temperatury w przedziale 283–328 K. Elektrody stopowe Pd-Rh osadzane były stałopotencjałowo metodą chronoamperometrii z kąpieli będących mieszaniną wodnych roztworów PdCl2 i RhCl3. Wszystkie warstwy stopowe osadzone zostały na złotym podłożu (obojętnym na elektrosorpcję wodoru), a ich grubość wynosiła ok. 1 μm. Otrzymano stopy o zawartości Pd od 97,3% do 60% w głębi. Wraz ze wzrostem stężenia jonów Rh w kąpieli oraz spadkiem wartości potencjału osadzania następował wzrost zawartości Rh w stopie. W celu określenia morfologii powierzchni warstw palladu i stopów palladu z rodem wybrane elektrody zbadane zostały metodą skaningowej mikroskopii elektronowej (SEM). Badania obejmowały zarówno świeżą warstwę tuż po osadzeniu, jak i warstwę po przeprowadzeniu cyklu procesów absorpcji i desorpcji wodoru. Każda z osadzonych warstw niezależnie od zawartości Pd i Rh szczelnie pokrywała powierzchnię złota. Po elektrosorpcji wodoru na powierzchni wszystkich badanych próbek pojawiły się spękania, które powstały wskutek wnikania wodoru w głąb warstwy (absorpcja) i spowodowanych tym naprężeń. Warstwy po elektrosorpcji wciąż bardzo dobrze przylegały do powierzchni złota i nie dało się zauważyć jakichkolwiek widocznych ubytków powłoki stopowej. Morfologia powierzchni stopów Pd-Rh znacznie się zmienia wraz ze wzrostem zawartości Rh: na powierzchni stopów Pd-Rh wyróżnić można albo krystality w postaci igieł (stopy Pd-Rh o zawartości Pd powyżej 90%), albo skupiska w kształcie grudek (stopy Pd-Rh o zawartości Pd poniżej 90%). Wykonanie analiz składów objętościowych metodą EDS w wielu mikroobszarach oraz profil głębokościowy pozwoliły wnioskować o homogeniczności stopów Pd-Rh. Przy wykorzystaniu metod XPS oraz AES potwierdzono wzbogacenie powierzchni stopów w Pd w stosunku do składu stopu w jego objętości. Metoda XRD posłużyła do wyznaczenia m.in. rodzaju sieci krystalicznej, stałych sieciowych kilku wybranych składów stopów przed absorpcją wodoru i po niej. Pomiary metodą XRD wykonano w atmosferze powietrza, helu i wodoru. Przesunięcie sygnałów pochodzących od osadu Pd-Rh w kierunku wyższych wartości kąta rozproszenia niż w przypadku czystego Pd oznacza, że sieć krystaliczna Pd-Rh charakteryzuje się stałą sieciową o niższej wartości niż dla Pd – powstał zatem stop kontrakcyjny. Zidentyfikowano typ sieci krystalicznej jako regularną ściennie centrowaną (fcc, ang. face centered cubic). Po wymianie gazu na hel sygnał powraca do pierwotnego położenia. Oznacza to, że pod względem strukturalnym proces absorpcji wodoru jest w pełni odwracalny. Absorpcja wodoru w stopach Pd-Rh prowadzona była metodami elektrochemicznymi: chronoamperometrią (CA) oraz chronowoltamperometrią cykliczną (CV). Maksimum zdolności absorpcyjnej odpowiada obszarowi zawartości Pd w stopie ok. 92,5%. Maksymalna wartość stosunku H/M dla tego składu stopu Pd-Rh wynosiła ok. 0,83, co oznacza zwiększenie pojemności absorpcyjnej w stosunku do czystego Pd o ok. 13%. Należy też podkreślić, że wszystkie stopy Pd-Rh zawierające powyżej ok. 85% Pd w głębi posiadały zwiększoną maksymalną zdolność absorpcyjną wodoru w porównaniu do Pd. Dopiero stopy wyraźnie uboższe w Pd absorbują mniej wodoru, zaś przy zawartości objętościowej ok. 60% Pd ich zdolność absorpcyjna w badanych przeze mnie warunkach eksperymentalnych zanika. Wraz ze wzrostem zawartości Rh w stopie izoterma absorpcji wodoru przesuwa się w kierunku niższych wartości potencjałów. Jest to spowodowane kontrakcją sieci krystalicznej stopów Pd-Rh, przyczyniającą się do zwiększenia nakładu energetycznego potrzebnego do późniejszej ekspansji komórki elementarnej podczas tworzenia się fazy β wodoru zaabsorbowanego (efekt geometryczny). Otrzymano liniową zależność potencjału przejścia fazowego α→β od objętościowej zawartości składników elektrody stopowej. Korelacja ta została zaproponowana i z powodzeniem zastosowana jako podstawa nowej, nieinwazyjnej metody wyznaczania in situ składu bogatych w Pd stopów dwuskładnikowych pochłaniających wodór w warunkach elektrochemicznych. Przeprowadzone eksperymenty chronoamperometryczne pozwoliły opisać kinetykę elektrosorpcji wodoru na podstawie wartości czasu potrzebnego do osiągnięcia pełnego nasycenia elektrody wodorem oraz utlenienia zaabsorbowanego wodoru w zależności od przyłożonego potencjału dla stopów Pd-Rh o różnym składzie. Dla potencjałów odpowiadających przejściom fazowym pomiędzy fazami α i β obserwuje się maksima w wartości czasu potrzebnego na całkowite absorpcję i desorpcję wodoru. Oznacza to, że przy potencjałach odpowiadających współistnieniu obu faz zaabsorbowanego wodoru najwolniejszym etapem w całym procesie jest przejście fazowe α→β/β→α, toteż kontroluje ono całkowitą szybkość procesów absorpcji/desorpcji. Na podstawie analizy krzywych CA możliwe było wyznaczenie granicznych zawartości wodoru zaabsorbowanego w obu fazach (maksymalne stężenie wodoru w fazie α i minimalne stężenie w fazie β). Luka mieszalności w układzie Pd-Rh-H zanikała przy zawartości Rh ok. 25%. Podobnie jak dla innych stopów Pd z metalami szlachetnymi (Au, Pt, Ru) histereza (różnica potencjałów przejścia fazowego β→α i α→β) zmniejsza się w obecności drugiego metalu i maleje ze wzrostem jego zawartości objętościowej w stopie. Dla badanych przeze mnie stopów Pd-Rh w temperaturze pokojowej histereza maleje od wartości ok. 16 mV dla czystego Pd do ok. 4 mV dla stopu zawierającego 12% Rh w głębi. Podsumowując, dodatek Rh do Pd powoduje przyspieszenie procesu desorpcji wodoru, zmianę pojemności absorpcyjnej w zależności od składu stopu, szybszą przemianę fazową oraz zmniejszenie wielkości histerezy. Eksperymenty elektrochemiczne prowadzone były w zakresie temperatur 283–328 K. Maksymalna zdolność absorpcyjna stopów Pd-Rh zmniejsza się w przybliżeniu liniowo wraz ze wzrostem temperatury w badanym zakresie. Tłumaczyć to należy egzotermicznością procesu absorpcji wodoru w tych układach. Wraz ze wzrostem temperatury wzrasta maksymalna wartość natężenia prądu (krzywe CA i CV) oraz odwracalność elektrochemiczna procesu sorpcji wodoru (krzywe CV). Czas potrzebny na utlenienie zaabsorbowanego wodoru staje się krótszy przy wyższych temperaturach. Wzrost temperatury powoduje również obniżenie potencjałów przejścia fazowego α→β i β→α oraz zmniejszenie wielkości histerezy. Przeprowadzenie eksperymentów w różnych wartościach temperatury pozwoliło na obliczenie wartości funkcji termodynamicznych procesu sorpcji wodoru. Widoczny jest spadek wartości bezwzględnych entalpii swobodnej wraz ze wzrostem temperatury, tj. następuje zwiększanie entalpii swobodnej absorpcji wodoru wraz ze wzrostem temperatury oraz zmniejszanie entalpii swobodnej desorpcji wodoru wraz ze wzrostem temperatury. Tendencja ta wskazuje na zmniejszanie się termodynamicznej trwałości fazy β w wyższej temperaturze dla elektrod Pd-Rh o danym składzie objętościowym. Jednocześnie dla ustalonej temperatury trwałość termodynamiczna wodorku maleje ze wzrostem objętościowej zawartości Rh w stopie. W przypadku tendencji zmian entalpii ze składem stopów w głębi otrzymane wyniki są spójne z literaturą i pokazują, że wraz ze spadkiem objętościowej zawartości Pd entalpia tworzenia fazy β staje się coraz mniej ujemna, a jej rozkładu – coraz mniej dodatnia. Proces absorpcji wodoru w fazie β jest zatem coraz mniej egzotermiczny w miarę wzrostu zawartości Rh w stopie, co jest charakterystyczne dla stopów kontrakcyjnych. Dodatek Rh do Pd ma niewielki wpływ na wartości entropii tworzenia wodorku, co wskazuje na możliwość zajmowania przez atomy wodoru wszystkich typów luk międzywęzłowych, zarówno w sąsiedztwie Pd, jak i Rh. Otrzymane wyniki opublikowane zostały w siedmiu oryginalnych publikacjach w czasopismach naukowych. Artykuły, których jestem autorką, cytowane są od momentu publikacji do dzisiaj, co świadczy o ważności oraz aktualności podjętej tematyki.The aim of the dissertation was to develop electrodeposition conditions of Pd and Pd-Rh alloys, as well as to investigate hydrogen electrosorption from acidic solutions in these materials with particular emphasis on the influence of the electrode potential, alloy composition and temperature. The research covered obtaining Pd-Rh alloys as limited volume electrodes (LVE), i.e. thin layers deposited on conducting substrate, and characterising them by means of electrochemical methods: chronoamperometry (CA) and cyclic voltammetry (CV), as well as physicochemical techniques: scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and atomic emission spectroscopy (ASE). Pd-Rh electrodes with different % at. Pd bulk content (60–97.3%) and various temperature (283–328 K) have been tested. Pd-Rh alloys were deposited using chronoamperometry from baths being a mixture of aqueous solutions of PdCl2 and RhCl3. All alloy layers were deposited on a gold substrate (neutral for hydrogen electrosorption), and their thickness was about 1 μm. The resultant Pd-Rh alloys contained from 97.3% to 60% Pd in depth. With the increase of the concentration of Rh ions in the bath and decrease of the deposition potential, the Rh content in the alloy increased. In order to determine the surface morphology of palladium and palladium-rhodium layers, selected electrodes were examined by scanning electron microscopy (SEM). The tests covered both the fresh layer immediately after deposition and the layer after the cycle of hydrogen electrosorption and desorption. Each of the deposited layers, regardless of the content of Pd and Rh, tightly covered the surface of gold. After electrosorption of hydrogen, cracks appeared on the surface of all the tested samples, which was due to hydrogen penetration into the material (absorption) and the resulting stresses. The electrosorption layers still adhered to the gold surface very well and no visible defects in the alloy coating could be seen. The morphology of Pd-Rh alloy surfaces changes significantly with the increase of Rh content: on the surface of Pd-Rh alloys one can distinguish either needle crystallites (Pd-Rh alloys with Pd content 98% and 95%) or clumps (Pd-Rh with Pd content of 90%, 80% and 70%). Analysing the volume compositions using the EDS method in many micro-areas and the depth profile allowed to conclude about the homogeneity of Pd-Rh alloys. With the use of the XPS and AES methods, the enrichment of alloy surfaces in Pd was confirmed in relation to the composition of the alloy in its volume. The XRD method was used to designate, among others, a type of crystal lattice, lattice constants of several selected alloys before and after hydrogen absorption. XRD measurements were carried in air, helium and hydrogen atmosphere. The shift of signals from the Pd-Rh deposit to the higher values of the scattering angle compared to pure Pd means that the Pd-Rh crystal lattice is characterized by a lattice constant of a lower value than for Pd – it means that a contraction alloy was created. The type of crystal lattice was identified as regular centered cubic (fcc). After the exchange of gas to helium, the signal returns to the original position. It means that, in terms of structure, the hydrogen absorption process is fully reversible. Hydrogen absorption in Pd-Rh alloys was carried out by electrochemical methods: chronoamperometry (CA) and cyclic chronoltamperometry (CV). The maximum absorption capacity corresponds to the Pd content in the alloy of approx. 92.5%. The maximum value of the H/M ratio for this alloy was about 0.83, which indicates an increase in the absorption capacity by about 13% compared to the pure Pd. It should also be noted that all Pd-Rh alloys containing above about 85% Pd in depth had an increased maximum hydrogen absorption capacity compared to Pd. Alloys poorer in Pd absorb less hydrogen, while at a volume content of approx. 60% Pd their absorption capacity in the experimental conditions studied disappears. With the increase of the Rh content in the alloy, the hydrogen absorption isotherm moves towards lower values of potentials. This is due to the contraction of the crystal lattice of Pd-Rh alloys, contributing to the increase of the energy required for the subsequent expansion of the primitive cell during the formation of the β phase of absorbed hydrogen (geometric effect). A linear dependence of the phase transition potential α→β on the volumetric content of the alloy electrode components was obtained. This correlation was proposed and successfully used as the basis for a new, non-invasive method for the in situ determination of Pd-rich alloys that absorb hydrogen in electrochemical conditions. Chronoamperometric experiments allowed to describe the kinetics of hydrogen electrosorption on the basis of the time needed to achieve full saturation of the electrode with hydrogen and to oxidize the absorbed hydrogen depending on the applied potential for Pd-Rh alloys of various composition. For the potentials corresponding to the phase transitions between the α and β phases, maxima are observed in the value of time required for the total absorption and desorption of hydrogen. It means that with the potentials corresponding to the coexistence of both phases of absorbed hydrogen, the slowest stage in the whole process is the phase transition α→β/β→α, so it controls the total rate of the absorption/desorption processes. Based on the analysis of CA curves it was possible to determine the limiting hydrogen concentrations corresponding to the maximum saturation in the α phase and the minimum saturation in the β phase. The miscibility gap in the Pd-Rh-H system disappeared at a Rh content of ca. 25%. Similarly to other Pd alloys with precious metals (Au, Pt, Ru), hysteresis (the difference of phase transition potentials β→α and α→β) decreases with the addition of a second metal. For the Pd-Rh alloys tested at room temperature, the hysteresis decreases from the value of approx. 16 mV for pure Pd to approx. 4 mV for the alloy containing 12% Rh in depth. In conclusion, the addition of Rh to Pd accelerates the hydrogen desorption process, changes the absorption capacity depending on the composition of the alloy, accelerates phase transition and decreases the size of the hysteresis. Electrochemical experiments were carried out in the temperature range of 283–328 K. The maximum absorption capacity of Pd-Rh alloys decreases approximately linearly with the temperature increase in the tested range. This should be explained by the exothermicity of the hydrogen absorption process in these systems. As the temperature rises, the maximum current value increases (CA and CV curves) and the electrochemical reversibility of the hydrogen sorption process (CV curves). The time needed to oxidize the absorbed hydrogen becomes shorter at higher temperatures. The temperature rise also causes a reduction in the phase transition potentials α→β and β→α and a decrease in the hysteresis value. Carrying out experiments at different temperature values enabled calculating the thermodynamic functions of the hydrogen sorption process. There is a visible decrease in the absolute values of Gibbs energy as the temperature rises, i.e. an increase of the Gibbs energy of hydrogen absorption and a decrease of the free enthalpy of hydrogen desorption as temperature increases. This tendency indicates that the thermodynamic stability of the β phase at higher temperature for Pd-Rh electrodes decreases. At the same time, for a fixed temperature, the thermodynamic stability of the hydride decreases with increasing volume Rh content in the alloy. In the case of tendencies of enthalpy changes with the composition of alloys in depth, the obtained results are consistent with literature and show that with the decrease in the volume content of Pd, the formation of the β phase becomes less negative, and its decomposition – less positive. The process of hydrogen absorption in the β phase is therefore less exothermic as the Rh content in the alloy increases, which is characteristic of contraction alloys. The addition of Rh to Pd has a very small effect on entropy values of hydride formation, suggesting that hydrogen atoms occupy all types of interstitial gaps, both Pd and Rh neighboring interstices. The results obtained have been published in international scientific journals. The articles I am the author of have been quoted from the moment of publication. This testifies to the validity and current relevance of the subject matter

    Hidden costs of job demands-employee working style misfits

    No full text
    A misfit between job demands and employee characteristics can be costly for both the employee and the organization in which he or she works. In the dissertation, the hidden costs of the mismatch between employee working style, temperament, and job demands are explored through a combination of subjective and objective measures. The work is empirical in nature and is structured into three parts. The first, theoretical, part consists of a literature review from which a theoretical model is derived. The second, empirical part consists of five studies conducted on a total of N = 429 participants. The first two studies are exploratory, while the last three are laboratory experiments in which the subjective and objective costs of job demands-employee working style misfit are explored, and the work’s nine hypotheses are tested. This part ends with a discussion of the studies’ results and recommendations for management. The third, supplementary part consists of additional details concerning the statistical analyses in the studies, and materials used.Konsekwencje wykonywania pracy niezgodnej z predyspozycjami mogą być kosztowne zarówno dla samego pracownika jak i dla jego pracodawcy. W rozprawie doktorskiej, mającej charakter empiryczny testowanych jest dziewięć hipotez dotyczących obiektywnych i subiektywnych kosztów niedopasowania cech pracownika (jego temperamentu i stylu pracy) do charakteru pracy. Praca składa się z trzech części, w pierwszej części dokonany został przegląd literatury dotyczącej obiektywnych i subiektywnych kosztów psychologicznych będących następstwem niedopasowania pracownika do wymagań pracy oraz został przedstawiony model teoretyczny. W części drugiej przedstawione zostały wyniki pięciu badań empirycznych, w których łącznie wzięło udział 429 osób. Ta część kończy się rekomendacjami dla zarządzania. Część trzecia to suplement, w którym zostały przedstawione dodatkowe informacje dotyczące przeprowadzonych analiz zebranych danych oraz materiałów użytych w badaniach

    Migrants from the Middle East in European Union Politics

    No full text
    Wybór tematu dysertacji został podyktowany wzrostem znaczenia problemu migrantów z Bliskiego Wschodu w warunkach integracji europejskiej i prób kształtowania się tożsamości europejskiej. Jednym z głównych celów, które autor chce osiągnąć w niniejszej dysertacji jest identyfikacja, szczegółowa analiza oraz gruntowna prezentacja czynników kształtujących problemy migrantów z Bliskiego Wschodu, w tym przede wszystkim problemy wynikające z ich odmienności kulturowej. Zasadniczą ideą podjętych starań jest nie tyle ustalenie czynników kształtujących tożsamość zbiorową bliskowschodnich imigrantów, ale przede wszystkim zwrócenie uwagi na znaczenie identyfikacji zbiorowej imigrantów jako elementu funkcjonalnego polityki migracyjnej Wspólnoty oraz problemów z integracją migrantów w kontekście polityki Unii Europejskiej. Autor podjął się także oceny szans integracji migrantów z Bliskiego Wschodu ze społecznościami krajów europejskich, próby stworzenia prognozy w zakresie identyfikacji wartości uniwersalnych, na bazie których przybysze z Bliskiego Wschodu wraz z mieszkańcami Starego Kontynentu mogliby współtworzyć wciąż kształtującą się tożsamość europejską.The choice of the dissertation topic was determined by the growing importance of the problem concerning migrants from the Middle East in the conditions of European integration and attempts of creating a European identity. One of the main goals the author wants to achieve in this thesis is identification, deep analysis and thorough presentation of factors that lead to the problems of the Middle East migrants, including mainly the problems arising from their cultural differences. The principal idea of the undertaken efforts is not only to determine the factors developing the collective identity of Middle Eastern immigrants, but foremost to draw attention to the importance of immigrants’ collective identification as a functional element of the Community migration policy and problems concerning the integration of migrants in the context of European Union policy. The author tried to assess the chances of integrating migrants from the Middle East with the communities of European countries, and make a forecast for the identification of universal values on the basis of which newcomers from the Middle East together with the population of Old Continent could jointly create still developing European identity

    Information ecosystems of software development communities

    No full text
    W swojej pracy autor przedstawia otwarte społeczności programistyczne i wytwarzane przez nie: rozwiązania, systemy oraz narzędzia. Rolę otwartych społeczności autor prezentuje zarówno na przykładach operatorów telekomunikacyjnych, którzy gromadząc wokół siebie społeczności stworzyli otwarte ekosystemy programistyczne, jak i na podstawie własnych doświadczeń praktycznych, zebranych w trakcie tworzenia krajowych ekosystemów programistycznych. Były to m.in. BIHAPI, ekosystem stworzony w trakcie konkursu Business Intelligence Hackathon API oraz Open Middleware Community. Cechy ekosystemów stworzonych przez firmy z sektora komunikacji elektronicznej oraz doświadczenia autora są podstawą do określenia głównych elementów otwartych społeczności programistycznych: otwartości struktur, spójności interfejsów technologicznych, otwartych danych traktowanych jako dobro wspólne, a także wykorzystania nowoczesnych narzędzi ICT wspierających w czasie rzeczywistym wzajemne relacje uczestników społeczności.Zagadnienia związane z otwartymi API i otwartymi danymi autor odnosi do innowacyjności, własności intelektualnej oraz bezpieczeństwa danych. Przedstawia też przykłady przedsiębiorczości sieciowej, crowdsourcingu oraz crowdfundingu. Autor podkreśla, że do realizacji niematerialnych celów, elementy ekosystemu wymagają struktury materialnej. Strukturą taką według autora jest współczesne inteligentne miasto – złożona, usieciowiona organizacja wyposażona w nowoczesne narzędzia ICT. Miasto zdefiniowane jako platforma do realizacji celów społecznych. W mieście powstają nie tylko elementy dobra wspólnego o charakterze materialnym, ale także nowe rodzaje niematerialnego dobra wspólnego, zwłaszcza otwarte dane miejskie, generowane przez mieszkańców, firmy, instytucje oraz organizacje, dostępne bez ograniczeń dla wszystkich zainteresowanych ich treścią i możliwościami ich wykorzystania. Według autora warunkami koniecznymi (choć niewystarczającymi) dla budowy efektywnych sieciowych ekosystemów informacyjnych tworzonych przez społeczności programistyczne są: istnienie istotnych społecznie zbiorów otwartych danych, swobodny dostęp do zasobów i usług otwartych systemów informacyjnych, w tym do otwartych danych, istnienie i dostępność otwartych interfejsów programistycznych (API) i możliwość tworzenia nowych API oraz zbiorów informacyjnych i programów usługowych, a także dołączanie ich do zasobów systemu na zasadzie konsensusu społeczności sieciowej. W swojej pracy autor proponuje generyczny model ekosystemu informacyjnego społeczności programistycznych.In his work the author presents open software development communities, as well as solutions, systems and tools created by such communities. The role of open communities is presented by the author based on both, examples of telecommunications operators that have created open software development ecosystems by attracting such communities, as well as the author’s practical experience gained while creating Polish software development ecosystems. They included, among others, BIHAPI, an ecosystem created during the Business Intelligence Hackathon API competition and Open Middleware Community. The features of ecosystems created by electronic communications companies and the author's experience are the basis for defining the main elements of open software development communities: openness of structures, consistency of technological interfaces, open data treated as a common good, and also the use of modern ICT tools supporting mutual relationships among the community participants in real time. Topics related to open APIs and open data are related by the author to innovations, intellectual property and data security. Examples of online entrepreneurship, crowdsourcing and crowdfunding are also presented. The author emphasizes that elements of an ecosystem require a tangible structure in order to accomplish intangible goals. According to the author a contemporary smart city is such a structure - a complex, networked organization equipped with modern ICT tools. A city defined as a platform dedicated to achieving social goals. Not only tangible elements of common good are created in the city, but also new types of intangible common good, especially open city data sets generated by citizens, companies, institutions and organizations, available without restrictions to all parties interested in their content and use options. According to the author, the prerequisites (but insufficient conditions) for building efficient online information ecosystems created by software development communities include: existence of socially relevant open data sets; free access to open information systems resources and services, including open data; existence and availability of open programming interfaces (API) and ability to create new APIs as well as information sets and service programs, and also to add them to the system resources based on the online community consensus. In his work the author is proposing a generic model of the software development community information ecosystem

    Attentional processes and relationships between axial symptoms of autism spectrum disorders

    Get PDF
    Przedmiotem pracy była sprawność procesów uwagowych – selektywność, przerzutność i koncentracja, a także czujność i orientacja oraz uwaga wykonawcza – u młodzieży w normie intelektualnej z zaburzeniami ze spektrum autyzmu (autism spectrum disorders – ASD), na tle rówieśników rozwijających się typowo. Przedmiotem badania był również związek sprawności w zakresie wymienionych procesów uwagowych z głównymi objawami zaburzeń ze spektrum autyzmu. W badaniu uczestniczyło 51 osób w normie intelektualnej z ASD w wieku 12–20 lat oraz 50 typowo rozwijających się rówieśników, dobranych pod względem poziomu ogólnego rozwoju umysłowego. Kontrolowano także proporcję płci w badanych grupach. Wykorzystano test komputerowy Attention Network Test (ANT) oraz wystandaryzowane testy: Test Badania Uwagi d2, Kolorowy Test Połączeń (CTT), Test Sortowania Kart z Wisconsin (WCST) i Powtarzanie Cyfr ze Skali Inteligencji Wechslera. Do oceny nasilenia objawów ze spektrum autyzmu zastosowano polskie adaptacje lub wersje eksperymentalne następujących narzędzi: Kwestionariusz Zachowania i Osobowości (AQ), Kwestionariusz Komunikacji Społecznej (SCQ), Protokół obserwacji do diagnozowania zaburzeń ze spektrum autyzmu (ADOS-2) i wywiad kliniczny ADI-R (Autism Diagnostic Interview-Revised). Stwierdzono niższą sprawność w zakresie czujności uwagi i orientacji uwagi u osób z ASD niż u rówieśników rozwijających się typowo. Pod względem uwagi wykonawczej nie stwierdzono między grupami różnic istotnych statystycznie. Różnica uwidoczniła się natomiast w zadaniach, które wymagały jednoczesnego współdziałania różnych procesów uwagi wykonawczej. Odnotowano związek między sprawnością w zakresie czujności uwagi a nasileniem stereotypowych zachowań i ograniczonych zainteresowań. Sprawność orientacji uwagi była związana z ograniczoną ekspresją w komunikacji niewerbalnej oraz zaburzeniami w interakcjach społecznych. Uwaga wykonawcza była powiązana z zaburzeniami w komunikacji i interakcjach społecznych.The aim of the research was to compare the efficacy of attentional processes, including selectivity, switching and the ability to focus, as well as alerting, orienting and executive function, in adolescents with autism spectrum disorder (ASD) in normal range of intelligence and their typically developing counterparts. The second goal of the study was to investigate a relation between the efficacy of attentional processes and the main symptoms of autism spectrum disorders. The study was conducted in 51 adolescents with ASD with IQ in normal range aged 12-20 years and 50 typically developing counterparts matched on IQ. Male-to-female ratio was also controlled in the study. To measure attentional processes, a computer-based test, Attention Network Test (ANT), and the following standardized tests were used: D2 Test of Concentration, Color Trails Test (CTT), Wisconsin Card Sorting Test (WCST) and the Digit Span from The Wechsler Intelligence Scale. The intensity of autistic symptoms was assessed with the use of Polish test adaptations or experimental versions of the following tools: Autism Spectrum Quotient, Social Communication Questionnaire (SCQ), Autism Diagnosis Observation Schedule (ADOS-2) and Autism Diagnostic Interview ADI-R. The results of the analysis revealed decreased efficacy in alerting and orienting in adolescents with ASD in relation to their typically developing counterparts. No statistically significant differences in terms of executive function were observed in the groups. However, certain differences were revealed in tasks demanding an interaction between different processes of executive functions. The study showed that there is a link between the efficacy of alerting attention and an intensification of stereotypical behaviors and limited interests. The efficiency of orienting attention was related to restricted expression in non-verbal communication and impairments in social interactions. The executive attention was related to impairments in communication and social interactions

    Metafora i metonimia w dyskursie multimodalnym. Studia przypadku wybranych dzieł sztuki Magdaleny Abakanowicz i rysunków satyrycznych Pawła Kuczyńskiego.

    No full text
    The objective of the dissertation is to investigate the communicative role of cognitive devices such as metaphor and metonymy in the interpretation of visual and verbo-visual messages in Western culture expressed by two genres: art and satirical cartoons. I attempt to examine how the conceptual processes allow to gain insights into the meaning of the following works: two figural installations and one relief created by a renowned Polish artist Magdalena Abakanowicz, and four satirical cartoons by a Polish cartoonist Paweł Kuczyński. Although a growing number of studies have insightfully examined the potential of cognitive mechanisms in modalities outside the verbal realm (Mittelberg and Waugh 2009; Mittelberg 2014; Müller 2008; Forceville 1996, 2007, 2008, 2009; Górska 2010, 2014; Zbikowski 2009), the sphere of art, in particular, sculpture, has still been paid little attention. In this study, I investigate the relevance of the multimodal approach in the analysis of verbo-visual works, focusing on how a juxtaposition of the verbal and the visual modality results in various, often unexpected, interpretations. The dissertation is also dedicated to semantic analyses of four thematically related satirical cartoons by Paweł Kuczyński, the area of research which has been successfully studied by various cognitive scholars (El Refaie 2009; Forceville 2014). In my study, I concentrate on the meaning of four satirical cartoons, and I examine the cognitive mechanisms which are employed in their interpretations to illustrate adverse changes in the contemporary trends in mass communication. I study how metaphorical and metonymic reasoning facilitates the process of meaning construction, and which factors determine multiple readings of the verbo-visual compositions. The study also aims to explore the role of textual elements in the process of meaning creation, and the extent to which information expressed via the verbal modality may elaborate the visual composition and affect conceptualisations. The dissertation is anchored in the multimodal framework by Charles Forceville (1996, 2007, 2008, 2009, 2013), and grounded on the Conceptual Metaphor Theory (Lakoff and Johnson 1980, 1999). The discussion concentrates on the conceptual potential of metaphor and metonymy in the visual and verbo-visual material, and their communicative function in the process of meaning construction. The conceptual relations that bind visual compositions with textual elements are examined on the basis of three artworks by Magdalena Abakanowicz and four satirical cartoons by Paweł Kuczyński. The dissertation is structured in six chapters. Chapter 1 provides a theoretical overview and addresses selected cognitive tools which are relevant in the data analyses in the following chapters. In chapters 2-5 the artworks and cartoons are analyzed. Chapter 6 provides a summary of the analyses.Celem rozprawy jest badanie komunikacyjnej roli mechanizmów kognitywnych takich jak metafora i metonimia w interpretacji komunikatów wizualnych i ustno-wizualnych w kulturze Zachodu, wyrażonych przez dwa gatunki: sztukę i rysunki satyryczne. Staram się zbadać w jaki sposób procesy kognitywne pozwalają zrozumieć znaczenie następujących dzieł: dwóch instalacji figuralnych i jednej płaskorzeźby stworzonych przez słynną polską artystkę Magdalenę Abakanowicz, oraz czterech rysunków satyrycznych polskiego grafika Pawła Kuczyńskiego. Pomimo rosnącej liczby wnikliwych badań potencjału procesów kognitywnych w analizie modalności poza sferą językową (Mittelberg and Waugh 2009; Mittelberg 2014; Müller 2008; Forceville 1996, 2007, 2008, 2009; Górska 2010, 2014; Zbikowski 2009), sztuce, a szczególnie sztuce rzeźbiarskiej, wciąż poświęca się niewiele uwagi. W rozprawie badam zastosowanie ujęcia multimodalnego w analizie dzieł ustno-wizualnych, koncentrując się jak zestawienie modalności ustnej i wizualnej przyczynia się do różnych, często nieoczekiwanych interpretacji. Dysertacja jest również poświęcona analizom semantycznym czterech tematycznie powiązanych rysunków satyrycznych Pawła Kuczyńskiego, obszaru badań prowadzonych z powodzeniem przez różnych badaczy kognitywnych (El Refaie 2009, Forceville 2014). Koncentruję się na znaczeniu rysunków satyrycznych i badam mechanizmy poznawcze które są zastosowane w ich interpretacjach aby zilustrować niekorzystne zmiany we współczesnych trendach komunikacji masowej. Badam w jaki sposób myślenie metaforyczne i metonimiczne ułatwia proces konstruowania znaczenia, oraz jakie czynniki determinują różne interpretacje badanych kompozycji ustno-wizualnych. W pracy analizowana jest również rola elementów tekstowych w procesie tworzenia znaczeń, oraz w jakim zakresie informacja wyrażona poprzez modalność słowną może rozwinąć znaczenie kompozycji wizualnej i wpłynąć na konceptualizacje. Rozprawa bazuje na modelu metafory multimodalnej Charlesa Forceville'a (1996, 2007, 2008, 2009, 2013) i opiera się na teorii metafory pojęciowej (Lakoff i Johnson 1980, 1999). Dyskusja koncentruje się wokół konceptualnego potencjału metafory i metonimii w materiale wizualnym i ustno-wizualnym oraz ich funkcji komunikacyjnej w procesie konstruowania znaczeń. Relacje pojęciowe które łączą kompozycje wizualne z elementami tekstowymi analizowane są na podstawie trzech dzieł Magdaleny Abakanowicz i czterech rysunków satyrycznych Pawła Kuczyńskiego. Rozprawa składa się z sześciu rozdziałów. Rozdział 1 zawiera teoretyczny wstęp dotyczący wybranych narzędzi kognitywnych które są istotne w analizie danych w kolejnych rozdziałach. W rozdziałach 2-5 analizowane są dzieła sztuki i rysunki satyryczne. Rozdział 6 zawiera podsumowanie badań

    Redukcja emisji przemysłowych poprzez stosowanie konkluzji dotyczących najlepszych dostępnych technik w świetle wymagań prawa Unii Europejskiej

    No full text
    Przedmiotem niniejszej rozprawy jest analiza konkluzji dotyczących BAT, jako prawnych instrumentów prowadzenia polityki środowiskowej. Konkluzje dotyczące BAT, jako instrumenty kompleksowo regulujące dopuszczalne poziomy emisji, wykraczają poza kwestie związane z ochroną powietrza, obejmując również redukcję i monitoring emisji, które trafiają do wód i gleby. Ze względu na kompleksowy charakter regulacji, stanowienie konkluzji dotyczących BAT koncentruje kluczowe zagadnienia związane z rozwojem polityki ochrony środowiska Unii Europejskiej. Stanowienie i stosowanie konkluzji dotyczących BAT związane jest z istotnymi zagadnieniami badawczymi, takimi jak: zastosowanie do oceny konkluzji dotyczących BAT zasad proporcjonalności i ostrożności, rosnące znaczenie ekspertów przy wypracowywaniu projektów aktów wykonawczych, zakres swobody państw członkowskich jeśli chodzi o dookreślenie sposobu stosowania konkluzji dotyczących BAT, czy też stosowanie odstępstw przewidzianych w art. 15 ust. 4 dyrektywy IED. Realizowany przez konkluzje dotyczące BAT model regulacji środowiskowej powinien nie tylko wpisywać się w prewencyjne działanie na rzecz minimalizacji ryzyka degradacji środowiska naturalnego, ale też uwzględniać ekonomikę funkcjonowania instalacji przemysłowych. Celem niniejszej rozprawy jest przedstawienie bardzie wyważonego podejścia do stosowania konkluzji dotyczących BAT, w ramach, którego stosowanie najlepszych dostępnych technik należy uwzględniać nie tylko cel ochrony środowiska, ale też powinno się umożliwić dalsze funkcjonowanie objętych zakresem ich stosowania instalacji przemysłowych.The subject of this dissertation is to analyse the BAT conclusions as the legal instruments of the EU environmental policy. The BAT conclusions are comprehensively regulating emissions are covering the air protection, reduction and monitoring of emissions to the water and soil. Due to the integrated approach and comprehensive nature of the regulation, the adoption of the BAT conclusions concerns key issues related to the recent development of the EU environmental policy.The adoption and application of the BAT conclusions is related to important research questions, in particular: application of the proportionality and precautionary principles, increasing importance of experts in elaborating draft implementing acts, Member States' freedom as regards the clarification of the way that the BAT conclusions are applied or the application of derogations under the Article 15(4) IED. The modern model of environmental regulation, which is exemplified by the BAT conclusions should take into account the economics of the industrial installations concerned. Finally, this dissertation argues for the more balanced approach to the application of the BAT conclusions, which should implement not only environmental principles but should also reflect the aim to maintain the operation of the industrial installations within the entire EU

    Zbiorowe działanie w związku z prawami osób LGBT wśród członków grupy

    Get PDF
    As one of the most galvanizing issues in current public debate, LGBT (Lesbian, Gay, Bisexual and Transgender) rights inspire a large variety of collective action events. While some of these events are meant to improve the legal standing of sexual and gender minorities, others intend to limit the rights of this group. The current research aims to reveal what encourages LGBT and heterosexual/cisgender individuals to engage in collective action related to LGBT rights. Using sexual stigma theoretical framework as conceptual bedrock, we integrate insights from different collective action literatures and formulate 44 hypotheses on macro-, meso-, and micro-level antecedents of engagement related to the rights of LGBT people. These hypotheses are then tested across nine studies conducted among minority and majority members. The results suggest that collective action intended to increase or restrict the rights of sexual and gender minorities originates not only from proximal psychological factors, but is also embedded in distal, structural factors. As such, present findings justify the integration of individualist and structuralist perspectives in future collective action research.Jako jedna z najbardziej elektryzujących kwestii w bieżącej debacie politycznej, prawa osób LGBT (tj. lesbijek, gejów, osób biseksualnych i transpłciowych) inspirują szeroki wachlarz przypadków zbiorowego działania. Podczas gdy niektóre z tych inicjatyw mają na celu poprawę sytuacji prawnej osób LGBT, inne dążą do ograniczenia praw przedstawicieli tej grupy. Celem niniejszego programu badawczego było ustalenie, co sprawia, że osoby LGBT oraz osoby heteroseksualne/cispłciowe angażują się w zbiorowe działanie związane z prawami osób LGBT. W oparciu o integrację teoretyczną odrębnych podejść w badaniach nad aktywizmem z teorią piętna seksualnego, sformułowano 44 hipotezy dotyczące źródeł zbiorowego działania związanego z prawami osób LGBT, przyporządkowując oczekiwane predyktory zaangażowania do trzech poziomów analizy – makro, mezo i mikro. Hipotezy te zostały następnie przetestowane w dziewięciu badaniach, w których udział wzięli zarówno członkowie grupy mniejszościowej (tj. osoby LGBT), jak i większościowej (tj. osoby heteroseksualne/cispłciowe. Otrzymane wyniki sugerują, że zbiorowe działanie nakierowane na rozszerzenie bądź ograniczenie zakresu praw przysługujących osobom LGBT wyjaśniane jest nie tylko przez proksymalne zmienne psychologiczne, ale też przez dystalne czynniki strukturalne. Opisane w niniejszej pracy badaniaprzemawiają zatem za integracją podejścia indywidualistycznego i strukturalistycznego w przyszłych badaniach nad aktywizmem

    Internal audit as a tool for improving the effectiveness of government administration units in Poland

    No full text
    W pracy przedstawione zostały narzędzia zwiększenia efektywności wydatkowania środków pu-blicznych takie jak audyt wewnętrzny i budżet zadaniowy w sektorze administracji rządowej w Polsce. Próbę badawczą stanowiły urzędy wojewódzkie. Opracowanie pokazuje istotne czynniki wpływu oraz sposób pomiaru efektywności funkcjonowania audytu wewnętrznego w urzędach wojewódzkich. Głównym celem pracy doktorskiej jest przedstawienie audytu wewnętrznego jako narzędzia zwiększenia efektywności wydatkowania środków publicznych. Przeprowadzone ba-dania empiryczne potwierdziły tezę główną pracy w zakresie pozytywnego wpływu wskaźników efektywności funkcjonowania audytu wewnętrznego na realizację zadań publicznych przez urzędy wojewódzkie.The paper presents pubic government tools such as internal audit and performance budget for increasing the effectiveness of public spending in the government administration in Poland. Voivodeship offices represented the research sample of this paper. The study shows the main determinants and the nature of measuring the internal audit effectiveness in voivodeship offices. The main goal of the paper is to present the internal audit as a tool for increasing the public spending efficiency. The empirical research confirmed the main doctoral thesis in the scope of the positive impact of the internal audit effectiveness on the public task completion by voivodeship offices

    471

    full texts

    2,396

    metadata records
    Updated in last 30 days.
    Repozytorium UW
    Access Repository Dashboard
    Do you manage Open Research Online? Become a CORE Member to access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard! 👇