SPEKTRUM INDUSTRI
Not a member yet
199 research outputs found
Sort by
KNOWLEDGE MANAGEMENT AND ISO/IEC 19796-1-BASED E-LEARNING BUSINESS ARCHITECTURE DESIGN FOR INDONESIAN HIGHER EDUCATION WITH TOGAF ADM APPROACH
Full text linke-Learning and distance learning implementation is part of the Indonesian Government's response to face the industrial revolution 4.0 and the disruption of higher education innovations through the Ministry of Research, Technology and Higher Education. -Learning and distance learning implementation in Indonesian higher education must be in line with Tridharma Perguruan Tinggi, and adopt a quality design approach that comes from a good framework. This research offers a design of e-learning business architecture in indonesian higher education that is in line with Tridharma Perguruan Tinggi, Indonesian Higher Education Accreditation, follows the quality framework and approach from ISO 19796 and PDCA cycle, and continuous improvement based on knowledge management. e-Learning business architecture design, carried out using TOGAF ADM approach. The e-learning business architecture design results for indonesian higher education are outlined in 5 parts, which is e-learning business architecture motivation, e-learning business functions and services, e-learning organizations, e-learning business processes, and e-learning business roles and actor
Supply Chain Analysis for Water and Sanitation Technology Research Project (Case Study in Morotai Island, North Maluku Province)
Full text linkMorotai’s sanitation and clean water technology is covering sanitation technology (bio filter, sanitary pond) and clean water (SPC, Reserve Osmose). This technology is ready to be applied in Daruba Pantai, Morotai, North Maluku and all of its technology originated from Java. Research problem’s focus on supply chain. Research objectives eager to see to what extent the supply chain of sanitation and clean water technology, from the technology producers which are mostly located in Java and the application location is in Morotai. The study of Supply Chain in Clean Water and Sanitation Technology Implementation using an applied based research approach. This study refers to scientific research and attempt to solve practical problems. The result of this study, any supply chain for four technologies in Morotai. The results consist of identifying supply chain components, determining network dimension structure that consists of three types dimension, determining type of business chain, and mapping supply chain. For the sanitation technology (bio filter), there are six certified bio filter suppliers and one of them will be selected as the supplier of the construction project in Morotai area. At the sanitary ponds technology, the constituent component/material can be retrieved from local suppliers in Morotai. For Simple Water Management Installation-Quick Sand Filter/SPC, the technology constituent component itself comprises of ground water tank, pump, roof tank, and Quick Sand Filter (made of fibre). This material is brought from the supplier named CV. Lusika in Bandung. Then, the RO technology constituent component is quite many comprising of water inlet valve, pre-filter, RO membrane, post-filter, automatic inspection valves, flow blockers, reservoir, faucet, and exhaust pipe. RO system unit is brought from the supplier called PT. Zeofilt Water Treatment that located in Bandung
The Application of Using Statistical Process Control (SPC) Tools : Research Issues and Literature Review
No full textA large company or industry must be able to overcome and resolve any problems that are being faced or in the future. Given that quality is the main thing that will measure the success of a company. One of the methods used in quality control is Statistical Process Control (SPC). The method to be used for this study is the study of literature. The method used is to review the 2016-2020 research papers that consistently apply the SPC method and have been published. The literature review process in this study combines published and relevant literature meta-analyses to provide some evidence of the effect of the existence of the implementation of the SPC method with several classifications. The classification includes the growth of research publications in the manufacturing sector and other sectors. The results of research literature that have been published from 2015 - 2020 is this research is useful as a basis for developing knowledge, gaps in views, providing evidence of effects, and if done well, has the capacity to be applied as further research ideas. An objective application of the SPC method can result in the elimination of waste as reduce defect and increasing quality and improving process. Subjective application of the SPC method requires high process commitment because the SPC method implements must be carried out continuously
Temperature and Machine Speed Settings to Reduce Defects Products in the Glass Bottle Washing Process
Full text linkSurabraja food trading company produces chili sauce and soy sauce. In July 2019, this company suffered a loss due to the number of broken bottles in the bottle washing process amounting to IDR 29,597,400. This study will identify the causes of defects using the six sigma method. Based on the define, measure, and analyze stages, it was found that the main causes of broken bottle defects were the temperature setting that was too hot and the engine speed that was not optimal. The repair process uses the taguchi experiment by determining the temperature and speed settings. The results of the Taguchi experiment showed that the best selected setting dosage formulations and their levels were A1 and AB2 where A1 (temperature 140°C), and AB2 (speed 10,000 bph). Based on a confirmation experiment with a temperature setting of 140°C, and a speed setting of 10,000 bpd, it was carried out using 48,000 bottles with 5 experiments, and a defect of 505 bottles was obtained. The results of the study concluded that the best results, namely at a temperature of 140°C and a speed of 10,000 bpd, can reduce the defect rate from 780 bottles to 505 bottles per day, and the value of the company's losses from IDR 466,429, - to IDR 301,900, -
Interrelationship Performance Indicators Model of Sustainable Procurement in Higher Education
Full text linkSustainable procurement is developing among practitioners and academics, but not many have done this research with the object of higher education institutions. This study succeeded in obtaining twelve indicators of sustainable procurement in higher education in Indonesia. The interpretive structural modeling method is used to model these indicators so that a four-level model is obtained, where the first level consists of seven indicators, the second level is one indicator, the third level is two indicators, and the fourth level is two indicators. In addition, the twelve indicators were also grouped using MICMAC analysis into four quadrants. Eight indicators are included in the autonomous indicators quadrant, four indicators are included in the independent indicators quadrant. Nothing is included in the dependent indicators and linkage indicators quadrant. This study proposes to the management of higher education to improve the performance of sustainable procurement, starting from level four indicators, namely the existence of routine monitoring and sustainability criteria (P12) and there is awareness of sustainable procurement on campus internals (P2)
CONCEPTUAL MODEL DEVELOPMENT OF REGIONAL INNOVATION DRIVING FACTORS IN CIANJUR REGENCY
Full text linkStrengthening regional competitiveness as a derivative of strengthening national competitiveness encourages every region in Indonesia to design a regional innovation system (SIDa), including Cianjur Regency. One of the activity programs at SIDa that have been carried out in 2019 is an innovation competition. Based on the evaluation of the innovation competition activities, it is known that the level of community participation is still very low. This indicates that the level of innovation enthusiasm is still low in the Cianjur community. This study aims to formulate a conceptual model between the factors of attitude towards innovation and knowledge awareness of the innovation enthusiasm of the people of Cianjur Regency. The research was carried out by conducting a literature review based on related previous studies. In this study, operationalization variables and item indicators were also carried out, as well as testing the reliability and validity of the measurement scale using initial data. The results of this study are in the form of a conceptual model that links attitudes towards innovation and awareness of knowledge towards innovation enthusiasm along with the level of reliability and validity of the measurements
A Systematic Literature Review of Six Sigma Implementation’s Benefit to the Organization
Full text linkSix sigma is a methodology which started in manufacturing sector that focuses in reducing the product variation, reducing defect and increasing customer satisfaction. Six sigma is being popular and being adopted in many organizations across the industries as well as the organization sizes around the globe. Six sigma successfully delivered many benefits starting from the quality improvement, increase productivity, increase job satisfaction, deliver cost saving, improve on time delivery and improve customer satisfaction that leads to more business growth, more profit and building the great foundation for the business sustainabilit
Multicase Study of Technician Careers in Manufacturing Industry
Full text linkThe development of industrial world every year changes very rapidly. The demand for workforce competence in the industry is increasing. Competence is the ability to do work effectively. The aim of this study is to identify careers in the position of Technician. This study uses a qualitative approach, by using interviews, documentation, and observation. The results of research regarding the work of Technician positions in the industry, include: checking production machines, coordinating and supervising, repairing production machines, and manufacturing spare parts for production machines. There are several competencies in the scope of work that a technician must have, regarding: Measuring Instruments, Technical Drawings, General Machining, and Special Requirements. Incentives obtained are based on grade, and holiday incentives. The salary range earned by the technician position is above the UMK of the area where the industry is located
Product Development And Performance of Reinforced Metal Matrix Composite Brake Disc: Modelling, Simulation And Multi-Criteria Decision Making Technique
Full text linkDemand for lightweight and durable components for automotive applications is increasing, such as brake discs. This paper presents an investigation on new material for brake discs which is metal matrix composite (MMC). This new material offers high strength – lightweight performance and high thermal conductivity if applied to automotive brake discs. This paper also explores new designs for brake disc using MMC as the material. The objective of this study is to present a recommendation for new brake disc material and design which can replace the existing one in terms of higher braking performance. Modelling, simulation, and multi-criteria decision making (MCDM) technique were used toselect the best design of MMC brake disc. The results show that Design 6 (with angular grooves) has the best performance at dissipating heat, reaching the highest temperature of 284.66°C and it has the lowest deformation of 0.589 mm. Subsequent analysis using MCDM shows that Deign 6 has the highest normalised priority of 0.2742 or the best alternative. The combination of MMC as the new material and new design can improve thermal and structural performance, hence improving the vehicle braking performance
Accident Analysis Work with Failure Mode and Effect Method Analysis at PT. Gansa Furindo Indonesia
No full textPT. Gansa Furindo Indonesia (GFI) is a company engaged in painting and powder coating services established in 1990. In the process of making such a long and involving painting machine and labor, it does not cover the possibility of work accidents. There are 3 categories of work accidents: minor accidents, moderate accidents, and serious/major accidents. For the 3 crash categories, it is seen how severe the injuries suffered in the work accident. This study aims to determine the steps to prevent and repair work accidents after knowing the categories of work accidents that occur. This research is focused on the production department, especially in the machining area where work accidents occur due to the lack of employee awareness of Health Safety and Environment (HSE). Work accidents include crashing objects with a static state of 108 RPN, contact with the machine while moving when taking the material inside the machine is 196 RPN, short circuit of 160 RPN, reverse mounting of 90 RPN and less neat cutting in the iron cutting of 168 RPN. Therefore, improvements are made in preventing work accidents that occur by making the latest Standard Operational Procedure (SOP)