96491 research outputs found
Sort by
Recurso didáctico para trabajar las noticias falsas y los mecanismos de desinformación en el aula de secundaria
La desinformación y la falsedad de noticias forman parte del paradigma comunciativo actual al que jóvenes y adultso están expuesto. Se presenta un recurso didáctico realizado en diversas aulas de secundaria en forma de taller para trabajar seis mecanismos de desinformación que utilizan los medios de comunicación. Además, el recurso se ludificó mediante un juego de rol y sigue los principios de la alfabetización mediática e informacional
The Rate of Histamine Degradation by Diamine Oxidase Is Compromised by Other Biogenic Amines
Nowadays, certain uncertainties related to the onset of histamine adverse effects remain unsolved and still require further research. Questions still to be resolved include the wide range of doses at which dietary histamine may trigger symptoms of intoxication (100–10,000 mg/kg) or the appearance of symptoms of histamine intolerance after the consumption of foods presumable without histamine. It seems feasible that other amines, by acting as competitive substrates, could interfere with histamine degradation by the intestinal enzyme diamine oxidase (DAO). Therefore, the aim of this study was to elucidate the interference of different amines on the rate of histamine degradation by DAO. A series of in vitro enzymatic assays were performed using histamine as the reaction substrate combined with different proportions of putrescine, cadaverine, tyramine, spermidine, and spermine (1:0.25, 1:1, 1:4, 1:20). Putrescine and cadaverine significantly delayed histamine degradation at all tested concentrations (p < 0.001). The greatest effect was observed when putrescine or cadaverine concentrations were 20-fold higher than that of histamine, its degradation being reduced by 70 and 80%, respectively, compared to histamine alone (28.16 1.0 mU). In contrast, tyramine, spermidine and spermine significantly inhibited the histamine degradation rate only at the highest concentration (1:20), reducing it by 32–45%. These results demonstrate that other biogenic amines interfere with histamine metabolization by DAO in vitro, the extent depending on the substrate. These findings could explain why susceptibility to dietary histamine is so variable and account for the discrepancies in the scientific databases regarding the amount of histamine that triggers adverse health effects
Characterization of the Miocene Castellón Sandstones Formation in the Western Mediterranean as a potential geological carbon storage site
In response to the growing interest in decarbonizing Europe's industrial hubs, this study examines the potential of the Miocene Castellón Sandstones Formation in the Valencia Trough for geological carbon storage. The proposed storage unit is represented by a siliciclastic succession formed mainly by sandstones and sandy heterolithics, in the Ebro Delta offshore area of the Valencia Trough. The sedimentological characterization of this succession, based on the study of a cored section from Amposta Marino C-2 well, has allowed to identify up to eleven lithofacies, comprising sandstones, heterolithics, calcarenites and carbonate breccias. These lithofacies can be grouped in six facies associations, including: 1) fluvial channel, 2) delta front proximal mouth bar, 3) delta front distal mouth bar, 4) proximal prodelta, 5) distal prodelta and 6) shelfal lag. The seismic stratigraphic analysis carried out throughout the study area points out to the additional presence of delta plain deposits in the northeastern sector of the study area, approximately at 30 km from the present-day Ebro delta shoreline. Based on the interpretation of these facies and seismic facies associations, the proposed depositional model consists of a river dominated, wave-influenced delta for the proto-Ebro deltaic system during the Late Miocene in the Valencia Trough. This study proposes that this sand-prone succession is presented as a good candidate for geological carbon storage in the study area, considering its proximity to the onshore Tarragona's industrial complex and its optimal reservoir characteristics. Additionally, the thick succession of the Ebro Shales also shows great potential as a vertical and lateral seal of the underlying Castellón Sandstones Formation
Alex Francés: Memòria, dol, amor i malenconia
Análisis de la obra del artista Alex Francés, el concepto de duelo y memori
Incidence and Clinical Significance of Recompensation After HCV Cure
BACKGROUND & AIMS: Baveno VII has proposed criteria for cirrhosis recompensation, but their prognostic significance in decompensated patients cured of hepatitis C virus (HCV) deserves further investigation. Thus, we studied the incidence and impact of recompensation after HCV cure as well as its predictors. METHODS: A total of 2570 patients with advanced chronic liver disease (ACLD) from 10 European centers were retrospectively included, including 2209 and 361 patients with compensated ACLD and decompensated cirrhosis who achieved sustained virologic response to direct-acting antivirals (DAAs). The association between achieving recompensation and clinical outcomes (hepatocellular carcinoma [HCC], portal vein thrombosis [PVT], and [liver-related] death) was investigated. RESULTS: During a median follow-up of 8.4 years from treatment initiation, 132 patients (36.6%) achieved recompensation. Lower albumin levels and diabetes were negatively associated with achieving recompensation. The incidence rates of liver-related death (4.2 vs 8.8 per 100 patient-years) and PVT (2.7 vs 5.4) were substantially lower after recompensation vs in the nonrecompensated state, while HCC incidence remained high (3.9 vs 5.5). Compared with decompensated cirrhosis, achieving recompensation was independently associated with decreased risks of subsequent liver-related death (adjusted hazard ratio, 0.384; 95% confi-dence interval, 0.225-0.655) and of PVT (adjusted hazard ratio, 0.421; 95% confidence interval, 0.224-0.759), but both risks remained higher than in compensated ACLD. Importantly, HCC incidence was not reduced as compared with decompensated cirrhosis. CONCLUSIONS: Recompensation after HCV cure is associated with substantially decreased risks of (liver-related) mortality and PVT, but not of HCC
Resolving the different bulk moduli within individual soft nanogels using small-angle neutron scattering
The bulk modulus, K, quantifies the elastic response of an object to an isotropic compression. For soft compressible colloids, knowing K is essential to accurately predict the suspension response to crowding. Most colloids have complex architectures characterized by different softness, which additionally depends on compression. Here, we determine the different values of K for the various morphological parts of individual nanogels and probe the changes of K with compression. Our method uses a partially deuterated polymer, which exerts the required isotropic stress, and small-angle neutron scattering with contrast matching to determine the form factor of the particles without any scattering contribution from the polymer. We show a clear difference in softness, compressibility, and evolution of K between the shell of the nanogel and the rest of the particle, depending on the amount of cross-linker used in their synthesis
Allylic C–H functionalization reactions for the cyclization of hemisilaketals
Treballs Finals de Grau de Química, Facultat de Química, Universitat de Barcelona, Any: 2025, Tutor: Xavier Ariza PiquerPolyhydroxylated compounds are among the most valued in organic chemistry due to their biological activity and, consequently, their pharmaceutical potential. 1,3-Diols are structural motifs commonly found in therapeutically significant drugs, such as statins. Therefore, the development and optimization of efficient synthetic methods to obtain them represent an important challenge. This is a constantly evolving field of research among other reasons, due to the difficulty in achieving stereoselectivity.
This project focuses on the synthesis of these valuable moieties based on allylic C–H activation, a less studied strategy for C–O bond formation. The formation of hemisilaketals leads to silaketals through a rhodium-catalyzed cyclization. Finally, a deprotection step is required to obtain stereoselective syn-1,3-diols, as depicted in the general scheme below. The synthesis and characterization of syn-1,3-diols has been accomplished from various substrates. This project also reports modifications to the synthetic pathway that enhance efficiency and yield higher-purity products. The methodology has been established as an effective and reproducible route for the stereoselective synthesis of the desired compounds. Furthermore, the range of possibilities for accessing these valuable compounds has been expanded, offering an alternative approach
Statistical techniques to analyse the impact of ceiling of care in COVID-19 hospitalised patients
[eng] INTRODUCTION: In December 2019, the first confirmed case of COVID-19 was registered in Wuhan, China. Due to its high contagiousness and the lack of familiarity with the disease it spread rapidly around the world, reaching Catalonia in February 2020. Since then, six waves of COVID-19 have been registered in Spain between February 2020 and February 2022 with almost 14 million confirmed cases and more than 121000 deaths.
Ceiling of care is the highest level of care that a patient will receive during medical treatment. It is common practice in subjects with a critical prognosis and is a decision based on clinical, ethical and legal considerations. In COVID-19 peaks, these decisions were made in an emergency setting without guidelines. Despite the importance of ceiling of care, the number of COVID-19 studies that collected the ceiling of care is scarce. Thus, it may be helpful to predict the level of care of patients based on their baseline covariates at hospital admission.
Moreover, the demographic and clinical profile of patients hospitalised during the COVID-19 pandemic changed from wave to wave, as did the rates of complications and mortality. Increased knowledge about the disease and treatments have also changed and may have affected patient outcomes.
HYPOTHESES:
1) There are differences in the baseline profile and outcomes of hospitalized patients with COVID-19 according to the ceiling of care at admission; 2) Ceiling of care can be predicted from the baseline profile of patients at admission; and 3) In-hospital mortality rates differ from wave to wave independently of baseline characteristics of patients. Additionally, the wave effect on mortality is not the same according to the ceiling of care assigned on admission.
OBJECTIVES:
1) To characterize all patients admitted with COVID-19 in five centres of Catalonia during four waves of the COVID-19 pandemic. Additionally, to compare the clinical profile and incidence of outcomes between patients with and without ceiling of care and between waves; 2) To develop and validate a model to predict the ceiling of care of patients hospitalized with COVID-19 using the information on the demographic and clinical profile of the subject available at hospital admission; and 3) To assess the impact of the pandemic wave on the incidence of mortality, independent of the demographic and clinical profile of the patients. In addition, to investigate whether the impact is different between patients with and without a ceiling of care assigned at hospital admission.[cat] INTRODUCCIÓ: Al desembre de 2019, es va registrar el primer cas de COVID-19 a Wuhan, Xina. Per la seva alta contagiositat i la manca de familiaritat amb la malaltia es va propagar ràpidament per tot el món, i va arribar a Catalunya al febrer de 2020. Des de llavors, s’han registrat a Espanya sis onades de COVID-19 entre el febrer de 2020 i el febrer de 2022, amb gairebé 14 milions de casos confirmats i més de 121000 morts. El sostre terapèutic és el nivell més alt d'atenció que rebrà un pacient durant el tractament mèdic. L’assignació del sostre és pràctica habitual en pacients amb pronòstic crític i es basa en consideracions clíniques, ètiques i jurídiques. En els pics de COVID-19, aquestes decisions es van prendre en un entorn d'emergència. Tot i la importància del sostre, el nombre d'estudis de COVID-19 que van recollir aquesta informació és escàs. Per tant, pot ser útil predir el sostre terapèutic dels pacients en funció de la seva informació a l'ingrés hospitalari. A més, el perfil basal dels pacients hospitalitzats durant la pandèmia va canviar d'una onada a l’altra, igual que les taxes de complicacions i de mortalitat. L’augment del coneixement sobre la malaltia i els tractaments també pot haver afectat els resultats dels pacients. HIPÒTESIS 1) Hi ha diferències en el perfil basal i en els resultats dels pacients hospitalitzats amb COVID-19 segons el sostre terapèutic assignat a l'ingrés; 2) El sostre terapèutic es pot predir amb el perfil basal dels pacients; i 3) Les taxes de mortalitat hospitalària difereixen entre onades independentment de les característiques basals dels pacients. A més, l'efecte de l’onada en la mortalitat no és el mateix en pacients amb i sense sostre terapèutic assignat. OBJECTIUS 1) Caracteritzar tots els pacients ingressats amb COVID-19 en cinc centres de Catalunya durant quatre onades de la pandèmia de COVID-19. Addicionalment, comparar el perfil clínic i la incidència de resultats entre pacients amb i sense sostre i entre onades; 2) Desenvolupar i validar un model per predir el sostre terapèutic dels pacients hospitalitzats amb COVID-19 utilitzant la informació sobre el perfil basal del pacient; i 3) Avaluar l'impacte de les onades sobre la incidència de mortalitat, independentment del perfil basal dels pacients. A més, investigar si l'impacte és diferent entre pacients amb i sense sostre assignat a l'ingrés hospitalari. MÈTODES: Les dades provenen de la cohort MetroSud, una cohort prospectiva d'individus adults amb infecció confirmada pel SARS-CoV-2 ingressats en cinc centres pertanyents a l'àrea metropolitana sud de Barcelona durant quatre onades de COVID-19. Es van construir models log-binomials per comparar la incidència de resultats en pacients amb sostre i sense sostre en les quatre onades, i es van reportar riscos relatius (RR) i intervals de confiança (IC) del 95%. Es van utilitzar models de regressió logística per desenvolupar el model predictiu de sostre. La validació interna del model resultant es va basar en la discriminació, la calibració i la validació per bootstrapping utilitzant la cohort de desenvolupament. La validació interna es va realitzar en tota la cohort i en subgrups d'interès clínic. La validació externa es va realitzar en una cohort d’hospitals de Leeds. Es van construir tres models per comparar la mortalitat entre onades: un model de regressió logística cru, un model de regressió logística totalment ajustat i un model de regressió logística ponderat amb pesos obtinguts mitjançant un propensity score per tenir en compte les diferències en el perfil basal dels pacients entre onades. Les variables utilitzades per a l'ajust eren variables basals del pacient a l'ingrés hospitalari. Totes les anàlisis es van realitzar amb un nivell de significació bilateral de 0.05 utilitzant el programa R versió 4.1.0 o superior. Principals resultats Es van analitzar un total de 5813 subjectes. Els subjectes amb sostre eren més grans, tenien més comorbiditats i menys signes clínics que els pacients sense sostre. Els subjectes amb sostre tenien una incidència de mort més de quatre vegades superior a la dels subjectes sense sostre en totes les onades. La incidència de complicacions en subjectes amb sostre va ser d'aproximadament 1.5 vegades la incidència en subjectes sense sostre en totes les onades. Un model per predir el sostre que incloïa edat, onada de COVID-19 i una sèrie de comorbiditats basals va tenir excel·lent discriminació i calibració. L'anàlisi de subgrups per sexe, grup d'edat i comorbiditats rellevants també va mostrar una calibració i discriminació excel·lents. La validació externa en la cohort de Leeds també va mostrar un bon rendiment. Respecte a la mortalitat hospitalària, la raó d’odds ajustada en la segona onada va ser de 0.57 (95%IC 0.40 a 0.80), en la tercera 0.56 (95%IC 0.37 a 0.84) i en la quarta 0.34 (95%IC 0.21 a 0.56) en comparació amb la primera onada en subjectes sense sostre. La raó d’odds ajustada va ser significativament menor en la quarta onada (0.38 95%IC 0.25 a 0.58) en comparació amb la primera onada en subjectes amb sostre. CONCLUSIONS: L'anàlisi dels pacients hospitalitzats amb infecció per SARS-CoV-2 s'hauria d'estratificar mitjançant el sostre terapèutic per evitar biaixos i sobreestimació de resultats. Hem demostrat que el sostre terapèutic es pot predir amb gran precisió a partir de la informació clínica del pacient disponible a l'ingrés hospitalari. En cohorts sense sostre terapèutic disponible, en futures pandèmies o en situacions d'emergència, el nostre model, combinat amb l'experiència clínica, podria ser valuós. No obstant això, es necessita treball futur per avaluar l'ús d'aquesta eina de predicció fora de la COVID-19. Comparant la mortalitat hospitalària entre onades, la mortalitat va disminuir en el temps en pacients sense sostre, fet que suggereix un millor coneixement i gestió de la malaltia. En els pacients amb sostre, només els de la quarta onada tenien menys probabilitats de morir que els de la primera onada. En una futura pandèmia causada per un organisme infecciós, serà un repte harmonitzar i millorar els criteris clínics i la gestió dels pacients amb sostre terapèutic
Computational studies of C-C and C-S cross-coupling reactions catalyzed by copper or nickel complexes
[eng] This thesis has addressed the development of sustainable and efficient catalysts through the mechanistic study and modeling of homogeneous catalytic processes. It has focused on cross-coupling reactions using alternative metals to palladium, such as copper and nickel, due to their lower cost and higher availability, aligning with environmental sustainability objectives.
Computational approaches have been employed to gain insights into the fundamental steps of catalytic cycles, with particular attention to processes such as bond activation and metal-ligand interactions. These studies contribute to a better understanding of the factors that influence catalytic performance and selectivity. While certain metals are traditionally favored for their efficiency and stability, ongoing research explores more accessible and tunable alternatives.
In addition, statistical, microkinetic and statistical learning studies have been employed to analyze the electronic effect of substrates with different functional groups on reagents. This has allowed predicting reactivity and optimizing combinations without extensive experimentation, accelerating the selection of ideal experimental conditions, maximizing efficiency, and reducing costs.
Overall, the obtained results show that it is possible to advance towards more sustainable catalytic processes through rational catalyst design and computational tools. It has contributed to the understanding of involved reaction mechanisms and can offer practical solutions for novel catalytic processes in line with green chemistry and sustainable development.[spa] Esta tesis ha abordado el desarrollo de catalizadores sostenibles y eficientes mediante el estudio mecanístico y modelización de procesos catalíticos homogéneos. Se ha centrado en reacciones de acoplamiento cruzado utilizando metales alternativos al paladio, como el cobre y el níquel y, por su menor coste y mayor disponibilidad, alineándose con objetivos de sostenibilidad ambiental.
Se han empleado métodos computacionales para comprender los pasos fundamentales de los ciclos catalíticos, con especial atención a procesos como la activación de enlaces y las interacciones metal-ligando. Estos estudios permiten entender mejor los factores que influyen en la eficiencia y selectividad catalítica. Aunque ciertos metales son tradicionalmente preferidos por su estabilidad y rendimiento, la investigación actual busca alternativas más accesibles y ajustables.
Además, se han empleado estudios estadísticos, microcinéticos y de aprendizaje estadístico para analizar el efecto electrónico de los sustratos con diferentes grupos funcionales en los reactivos. Esto ha permitido predecir la reactividad y optimizar combinaciones sin necesidad de una experimentación extensa acelerando la selección de condiciones experimentales ideales, maximizando la eficiencia y reduciendo los costes.
En conjunto, los resultados obtenidos muestran que es posible avanzar hacia procesos catalíticos más sostenibles mediante el diseño racional de catalizadores y las herramientas computacionales. Ello ha contribuido al entendimiento de los mecanismos de reacción involucrados, y puede ofrecer soluciones prácticas para nuevos procesos catalíticos en línea con la química verde y el desarrollo sostenible.[cat] Aquesta tesi doctoral aborda el desenvolupament de catalitzadors homogenis sostenibles i eficients mitjançant una estratègia integradora que combina l’estudi mecanístic detallat, la modelització computacional i l’anàlisi avançada de dades. L’objectiu principal ha estat contribuir al disseny racional de sistemes catalítics que ofereixin un alt rendiment químic, siguin econòmicament viables i, al mateix temps, respectin els principis de la sostenibilitat i la química verda. Aquest enfocament integral permet afrontar de manera global els reptes actuals, alineant la innovació científica amb la responsabilitat ambiental i social. El treball se centra especialment en les reaccions d’acoblament creuat, processos fonamentals en la síntesi de compostos orgànics complexos, molt utilitzats en àmbits com la indústria farmacèutica, l’enginyeria de materials i la química de productes naturals. Aquestes reaccions han estat tradicionalment catalitzades per metalls preciosos com el pal·ladi, que tot i ser molt efectius, presenten desavantatges importants: un cost elevat, la seva escassetat natural i un impacte ambiental considerable derivat de la seva extracció i ús. Davant d’aquests reptes, la recerca s’ha orientat cap a l’ús de metalls més abundants i sostenibles, com el coure i el níquel. Aquests ofereixen avantatges clars en termes de disponibilitat, menor cost i reducció de l’impacte ambiental. Així doncs, el desenvolupament de catalitzadors basats en aquests metalls representa una alternativa prometedora als sistemes tradicionals, i pot tenir implicacions molt rellevants en el futur de la síntesi química, especialment en la recerca aplicada i en la indústria química sostenible. Per tal de comprendre en profunditat els mecanismes que regulen aquestes reaccions, s’han aplicat tècniques computacionals avançades, com ara la teoria del funcional de la densitat (DFT). Aquestes eines han permès estudiar a nivell molecular les etapes claus dels cicles catalítics, com ara l’activació d’enllaços, la formació i ruptura d’intermedis reactius, les transicions d’estat i les interaccions entre els metalls i els lligands. Aquesta anàlisi detallada ha estat fonamental per identificar els factors que determinen l’eficiència i la selectivitat dels processos. Complementàriament, s’han incorporat mètodes d’estadística avançada, modelització microcinètica i aprenentatge automàtic per analitzar una gran quantitat de dades experimentals i teòriques. Aquests enfocaments han permès construir models predictius robustos, que ajuden a optimitzar les condicions de reacció i anticipar el comportament dels sistemes catalítics sense necessitat d’experimentació extensiva. Això suposa un estalvi considerable de temps i recursos i permet una recerca més eficient i sostenible. Els resultats obtinguts mostren clarament que la integració entre teoria, simulació i dades pot transformar profundament el desenvolupament de catalitzadors, promovent un canvi de paradigma en la investigació química. Aquest enfocament no només millora l’eficiència del treball científic, sinó que també contribueix a la creació de tecnologies més netes i compatibles amb els reptes ambientals actuals. Aquesta tesi estableix les bases per a futures investigacions que combinin la modelització teòrica amb l’experimentació guiada per dades, obrint noves possibilitats per al disseny de sistemes catalítics innovadors i sostenibles, adaptats a les necessitats de la societat i la indústria. En definitiva, aquest treball suposa un avanç significatiu cap a la química del futur, més conscient i respectuosa amb el medi ambient
CRISPR Knock-Ins in Organoids to Track Tumor Cell Subpopulations
The integration of CRISPR/Cas9 genome editing techniques with organoid technology has revolutionized the field of tumor modeling, enabling the creation of diverse tumor models with distinct mutational profiles. This protocol details the application of CRISPR knock-ins to engineer tumor organoids with reporter cassettes, which are regulated by endogenous promoters of specific genes of interest. This approach facilitates the precise fluorescent labeling, isolation, and subsequent manipulation of targeted tumor cell subpopulations. The utilization of these knock-in reporter cassettes not only allows the visualization and purification of specific tumor cell subsets but also enables conditional cell ablation and lineage tracing studies. In this chapter, we provide a comprehensive guide for the design, construction, delivery, and validation of CRISPR/Cas9 tools tailored for knock-in reporter cassette integration into specific marker genes of interest. By following this protocol, researchers can harness the potential of engineered tumor organoids to decipher intricate tumor heterogeneity, track metastatic trajectories, and unveil novel therapeutic vulnerabilities linked to specific tumor cell subpopulations