Swedish University of Agricultural Sciences

Epsilon Archive for Student Projects
Not a member yet
    18101 research outputs found

    A sustainable intensified clover grass ley with white clover : a review

    Get PDF
    Fördelarna med att inkludera vall i växtföljden är många, till exempel kolinlagring, markförbättrande egenskaper och ogräsbekämpning. Intresset för odling av vall ökar när det finns fler avsättningsmöjligheter och ses som ett medel för att uppnå en hållbar intensifiering av odlingssystemet. Genom ett symbiotiskt förhållande med kvävefixerande bakterier minskar behovet av kvävegödsling när baljväxter inkluderas i vallen. Blandvall har flera fördelar gentemot renbestånd av gräs respektive baljväxter, som att kväveffektiviteten förbättras och ensilaget får en god lagringskapacitet. Vitklöver är en vanligt förekommande baljväxt som används i vallfröblandningar i Sverige. Syftet med arbetet är att genom att sammanställa litteratur undersöka hur man åstadkommer en lyckad/hållbart intensifierad slåttervall med vitklöver med avseende på olika odlingsåtgärder. För att få en bakgrund till varför vitklöver svarar på odlingsåtgärderna på ett visst sätt inleds resultat med att undersöka vitklövers agronomi och morfologi. Odlingsåtgärderna som sedan undersöks i arbetet är inför sådd, skördesystem och kvävegödsling, övervintring och bevattning. En lyckad slåttervall med vitklöver anses vara en vall med 30–50 % vitklöver för att tillgodose tillräcklig kvävefixering för att möjliggöra en reducering av kvävegödsling och ge ett vallfoder med lämpligt proteinvärde. En avkastning över 9 ton ts per hektar och ett energivärde högre än 10,5 MJ anses som bättre än förväntad. Tillväxt och överlevnad av vitklöver påverkas starkt av utveckling och spridning av stoloner. Vitklövers fotosyntetiska förmåga kan begränsas i konkurrens med andra arter i vallbeståndet. Dock har vitklöver en förmåga att anpassa sig efter olika förhållanden för att förbättra tillgången till ljus men den har svårigheter att hävda sig vid vallens etablering, varför det är motiverat att vallen ligger längre än två år. Vitklöver är också en uthållig art som inte angrips så lätt av rotröta som rödklöver, vilket gör att den är mer långlivad och passar i en långliggande vall. För att gynna vitklöver bör det finnas god tillgång på kalium och fosfor samt ett pH-värde som inte är lägre än 5,5–6. Vitklöver bör inte odlas på jordar med hög lerhalt, utan passar bäst på lättare jordar med god tillgång till vatten. Val av metod för vallanläggning har inte en betydande inverkan på klöverandelen i ett vallbestånd. Vitklöver passar i ett intensivt skördesystem med minst tre skördar per år för djur med ett stort energibehov. Ett tidigt skördesystem gynnar vitklöverandelen, särskilt vid kvävegödsling. Kvävegödsling hämmar vitklöver och gynnar gräs varför den bör anpassas efter vallens botaniska sammansättning och önskad klöverandel. Största delen av kvävegödseln skall läggas på våren före första skörd och begränsas till återväxtskördarna för att uppnå bästa marginalutbytet och minimera den negativa effekten på vitklöver. Skördetidpunkten för sista återväxtskörden bör anpassas till beståndets tillväxt och de rådande temperatur- och nederbördsförhållandena för att säkerställa god övervintring och vårproduktion av vitklöver. Bevattning har en positiv effekt på vitklöverhalten och den totala avkastningen i ett blandbestånd.The benefits of including ley in crop rotations are numerous such as carbon sequestration, soil improving properties and weed management. There is also an increasing interest in cultivating ley since more market opportunities have developed and to include ley in the crop sequence is a means to achieve a sustainable intensification of the farming system. Through a symbiotic relationship with nitrogen-fixing bacteria, the need for nitrogen fertilisation decreases when legumes are included in the sward. Mixed swards have several advantages compared to pure stands of grass or legumes such as improved nitrogen efficiency and good storage capacity of the silage. White clover, a commonly occurring leguminous plant, can be selected for inclusion in ley seed mixtures. The purpose of this work is to, by compiling literature, investigate how to achieve a sustainable intensified clover grass ley with white clover in terms of various cultivation measures. To provide a background on why white clover responds in a certain way to cultivation measures, the results begin by examining the agronomy and morphology of white clover. The cultivation measures explored in this work include sowing methods, harvesting systems, nitrogen fertilisation, overwintering, and irrigation. A successful grass-clover ley with white clover is considered to be a ley with 30–50% white clover to ensure sufficient nitrogen fixation, enabling a reduction in nitrogen fertilisation, and providing ley forage with an appropriate protein value. A yield exceeding 9 tonnes of dry matter (DM) per hectare and an energy value higher than 10.5 MJ per kg DM are considered better than expected. The growth and survival of white clover is influenced by the development and spread of stolons. Competition with other species within the sward can limit white clover´s photosynthetic ability, leading to white clover trying to adapt to improve light conditions. However, white clover has difficulties asserting itself in the establishment of the sward, making it advantageous to maintain the sward for more than two years. White clover is also a persistent species that is not as easily attacked by root rot as red clover, which makes it more long-lasting and suitable for a long-term sward. White clover requires an ample providing of potassium and phosphorus, while maintaining an appropriate pH level not below 5,5–6, is essential to promote white clover growth. Cultivation of white clover should not occur in soils with high clay content, and it is best suited in sandy and silty soils with high precipitation. The choice of method for the establishment of the ley does not have a significant impact on the proportion of white clover in the sward. White clover is suitable in an intensive harvest system with at least three cuts to achieve a high-quality forage for animals with a high energy demand. An early harvest system favors the amount of white clover in the sward, especially when fertilised with nitrogen. Nitrogen fertilisation inhibits the nitrogen fixation of white clover ability and growth, favoring grasses. Most of the nitrogen fertiliser should be spread before the first harvest thus limited to the regrowth. The timing of the final harvest should be adapted to the growth of the sward and prevailing temperature and precipitation conditions to ensure successful overwintering and spring production of white clover. Irrigation positively impacts the proportion of white clover within a mixed sward as well as the total yield

    Estimating basal area weighted mean height and stem volume by using data from stereo-matched drone imagery through pre-existing models from Skogliga grunddata

    Get PDF
    Inom den svenska skogsbruksplanläggningen sker idag datainsamlingen traditionellt med subjektivt fördelade relaskopsytor. Den subjektiva mätningen varierar mellan och inom planläggare och har generellt ett relativt medelfel (rRMSE) på 9 % för grundytevägd medelhöjd (HGV) och 15–20 % for volym/ha. Att använda data från stereomatchade drönarbilder för att skatta dessa två variabler skulle kunna vara ett alternativ för att göra mätningen vid skogsbruksplanläggning mer objektiv och noggrann. I regel krävs det omfattande fältmätningar för att träna och validera modeller för att få bra skattningar ur de stereomatchade bilderna vilket är dyrt och tar lång tid. För att överkomma modellarbetet använder den här studien de befintliga modellerna som Skogliga grunddata (SG) producerat för HGV och stamvolym/ha. Dessa modeller är redan tränade och validerade men framtagna för laserdata och skattningarna bygger på de metriker som beskriver ett laserpunktmolns struktur. Då modellerna är framtagna för en annan typ av data än drönardata kalibreras skattningarna med pixelkalibrering för enskilda drönarmetriker i varje provyta med fältmätningar för att förbättra precisionen. Tidigare studier har visat att det är hög korrelation mellan främst överhöjdsmetriker som är framtagna för punktmoln från laser- och drönardata och att det går att skatta höjd och stamvolym med relativt små avvikelser genom att bygga modeller med drönarmetriker som korrelerar väl med lasermetriker. Ingen har ännu testat att ta befintliga modeller från SG som endast är tillämpade för laserdata på drönardata. Studiens syfte är att undersöka skattningspotentialen av HGV och stamvolym/ha i barrdominerade bestånd genom att använda drönarmetriker som tagits fram enligt Skogliga grunddatas villkor i deras befintliga prediktionsmodeller med kalibrering från fältmätningar. Med kalibreringen blir rRMSE 5,7 % för HGV och 14,18 % för stamvolym/ha. Utifrån studiens resultat är de kalibrerade skattningarna från drönarens metriker bättre än den subjektiva mätningen som används vid traditionell skogsbruksplanläggning. Denna metod skulle eventuellt kunna implementeras vid skogsbruksplanläggning där stödmätningar tas med exempelvis Katams teknologi för mobilmätning eller relaskopytor med en känd centrumkoordinat. Då denna studie använde en annan typ av kalibreringsteknik skulle dessa två typer av stödmätningar behöva utvärderas ytterligare innan de fullt ut implementeras vid skogsbruksplanläggning.Within Swedish forest management planning today, data collection traditionally takes place with subjectively distributed relascope sample plots. The subjective measurements vary between and within planners and generally has relative mean standard error (rRMSE) of 9% for basal area weighted average height (HGV) and 15–20 % for volume / ha. Using data from stereo-matched drone images to estimate these two variables could be an option to make the measurements in forestry management planning more objective and accurately. In general, there is a need for extensive field measurements to train and validate models to get good estimates from the stereo-matched images. This is expensive and takes a lot of time. To overcome the model work, this study uses the existing models that Skogliga grunddata (SG) produced for HGV and volume / ha. These models are already trained and validated but developed for laser data and the estimates are based on the metrics that describe the structure of a laser point cloud. As the models are developed for a different type of data source than drone data, the estimates for individual drone metrics in each sample area are calibrated using pixel calibration with field measurements to improve accuracy. Previous studies have shown that there is a high correlation mainly between upper height metrics that are developed for point clouds from laser and drone data. The study results also showed that it is possible to estimate height and stem volume with relatively small deviations by building models with drone metrics that correlate well with laser metrics. No one has yet tested the performance of preexisting models that are only applied to laser data with drone data. The aim of the study is to investigate the performance of estimating HGV and volume / ha in field plots dominated by conifers by using drone metrics in Skogliga grunddatas models. The drone metrics were calculated to fit the to the conditions of the Skogliga grunddata in their existing prediction models. The models’ estimations were calibrated from field measurements. With the calibration, the rRMSE becomes 5,7% for HGV and 14,18% for volume / ha. Based on the results of the study, the calibrated estimates from the drone's metrics are better than the subjective measurement used in traditional forestry planning. This method could possibly be implemented in forestry planning where supportive field measurements are taken with Katam's technology for mobile phone measurement or relascope sample plots with a known center coordinate. As this study used a different type of calibration technique, these two types of supportive field measurements would need to be further evaluated before they are fully implemented in forestry planning

    Embodied registration of the landscape : design of a shelter on Hallandsåsen

    Get PDF
    I detta masterarbete tydliggörs kroppslig registrering som metod, och i arbetet diskuteras hur kroppslig registrering kan bidra till platsförståelse. Kroppslig registrering används för att inspirera gestaltningen av ett vindskydd vid Krämarebygget, Hallandsåsen. För att utforska kroppslig registrering, gör jag fältbesök och sover på tre utvalda platser - i vindskydd i Barsebäckshamn och Torup samt i tält vid Krämarebygget. Skisser och modeller formade av landskapsupplevelser genom kroppslig registrering presenteras, för att undersöka hur metoderna formar materialet. Fältbesöken gav insikter och förståelse för platsernas användning, stämningsskiftningar under dygnet, samt genererade ideér till gestaltningen av vindskyddet till Krämarebygget. Ett gestaltningsförslag för ett vindskydd vid Krämarebygget presenteras därefter, till grund för vidare arbete på platsen.This master’s thesis seeks to articulate the notion of embodied registration as a collection of methods, and to discuss how embodied registration can contribute to place understanding. To explore embodied registration, I make field visits and sleep at three selected locations - in shelters in Barsebäckshamn and Torup, as well as in a tent at Krämarebygget.Sketches and models shaped by landscape experiences through bodily registration are presented to investigate how the methods shape the material. The field visits provided insights and understanding of the usage of the locations, changes in atmosphere throughout the day, and generated ideas for the design of the shelter at Krämarebygget. A design proposal for a shelter at Krämarebygget is presented as a basis for further work on the site

    Greener streets with 25 square meters : a study of challenges and opportunities by working with parklets promoting biodiversity in urban environments

    Get PDF
    Idag lever nästan 90% av Sveriges befolkning sina liv i urbana miljöer. Eftersom expansionen i många städer blivit begränsad riktas i stället blickarna mot den täta staden som lösning på problemet. Men med förtätning följer också många utmaningar. En utmaning ligger i att förtäta staden på rätt sätt så att många olika funktioner kan samsas om samma yta utan att norpa av våra värdefulla grönmiljöer. Samtidigt talar forskare om att vi förflyttat oss in i en ny geologisk epok; "Antropocen". Grundat i hur människans leverne påverkat och påverkar ekosystem och klimat i så pass stor omfattning att konsekvenserna är oundvikliga. En konsekvens är minskad biodiversitet, vilket märks tydligt i den urbana miljön. Med ett intresse för innovation och taktisk urbanism formades en idé som skulle komma att styra detta arbete. Idéen rörde parklet design (små tillfälliga eller semipermanenta fickparker placerade på en (12 m2 ) eller flera parkeringsrutor) och utforskandet kring huruvida man skulle kunna implementera design för biologisk mångfald som ett komplement till deras nuvarande vanliga funktioner. Där av formades arbetets huvudfrågeställning, samt två delfrågor; "Vilka utmaningar och möjligheter finns med att skapa innovativa parklets som utöver sina vanliga funktioner även främjar biodiversitet i urban miljö? Delfrågor: "är det över huvud taget möjligt att främja biodiversitet med parklets på en eller flera parkeringsrutor?", samt "finns det andra funktioner att arbeta med som indirekt kan gynna biodiversitet i det långa loppet?" En litteratur- och intervjustudie fördjupade kunskaperna inom följande ämnen: SPUGS (Small Public Urban Green Spaces), svenska riktlinjer för parklet design, The Parklet Manual, taktisk urbanism, ekosystemtjänster, urban ekologi, samt biodiversitetsfrämjande design. En sammanställning av utmaningar och möjligheter gav svar på arbetets frågeställningar. Så som den urbana miljön ser ut idag (ett väldigt hårdgjort och fragmenterat landskap), samt av anledningar kopplade till brister i parkletens ekologiska kvaliteter kan parkleten enbart stödja biologisk mångfald i begränsad omfattning. Men trots att parkletmodellen inte är den mest lönsamma metoden att främja biodiversitet på, upptäcktes även andra möjligheter som i det långa loppet skulle kunna göra skillnad för den urbana biologiska mångfalden. Genom att fokusera på naturpedagogik skulle gröna parklets kunna designas för att synliggöra värdet av urban natur, samtidigt som de fungerar som offentligt utrymme. Naturpedagogik kan implementeras på många olika sätt. Ett ämne som upprepade gånger nämnts i litteraturen gäller de flygande barriärståliga generalister som redan kan hantera den urbana miljön. Många av dessa är viktiga pollinatörer som både får vårt samhälle och vårt ekosystem att gå runt. Genom att, på ett pedagogiskt sätt, exempelvis designa parklets för pollinatörer skulle människor kunna få upp ögonen för gatans framtida gröna potential. Fler gröna gator kan leda till fler kvalitativa habitat med bättre konnektivitet där emellan och färre barriärer. Först då kommer biodiversiteten i större omfattning kunna öka i våra städer. Biodiversitetsfrämjande parklet-design bör därför handla om att både fokusera på kortsiktig och långsiktig förändring, i liten och stor skala, och att alltid vara medveten om vad ens design har för brister. För att ytterligare studera hur teorin kring de möjligheter som framkommit i litteraturstudien förhåller sig mer praktiskt, samt exemplifiera hur gröna parklet-projekt faktiskt skulle kunna se ut och utformas, genomfördes även ett gestaltningsförslag. "Pollineringsparklets" som projektet kom att kallas består av två exempel på parklets med fokus på pollinatörerna vildbin, respektive fjärilar. Av litteraturstudien framkom att semipermanenta parklets är att föredra, samt att det krävs en yta på minst två parkeringsrutor (25 m2 ) för att projektet ska vara hållbart, vilket har applicerats på båda parklets. I förslagen undersöks hur naturpedagogik kan inkluderas i vår närmiljö på ett nytt och spännande sätt i hopp om att ge gatan, människan och vårt ekosystem en grönare framtid.Increasing population rates, densification of our cities and our unsustainable way of living, keeps putting pressure on our ecosystems leading to inevitable consequences like for instance biodiversity loss. This is especially the case in environments where the urban matrix interferes with important ecological processes such as connectivity, pollination, food resources, qualitative green structures etc. With a passion for innovation and tactical urbanism an idea was formed regarding parklet design (Parklets = temporary or semi permanent pocket parks placed on top of one (12 m2 ) or more parking lots). Noticing that not many of them were inspired to promote biodiversity, I wanted to investigate the possibilities of implementing it in parklet design in addition to their existing social structures. This forms the main question of the study, along with two subquestions. What challenges and opportunities are there in creating innovative parklets that, in addition to its common functions, also promote urban biodiversity? Sub-questions: Is it even possible to implement biodiversity in 12 m2 parklets? Also, are there any other ecological functions that could be implemented in relation to biodiversity? To be able to answer these questions, a literature- and interview study was made increasing the knowledge about these following subjects; SPUGS (Small Public Urban Green Spaces), Swedish guidelines for parklet design, "The Parklet Manual", tactical urbanism, ecosystem services, urban ecology and design for biodiversity. From this knowledge a compilation of challenges and opportunities was created. It became very clear that, because of the way our cities are built today (A fragmented urban matrix of hard surfaces), along with lacks in qualitative ecological functions, parklets can only support biodiversity until a certain extent. But, although parklets are not the most efficient metod in promoting biodiversity other possibilities were found in the litterature studies that could even benefit urban biodiversity in the long run. By focusing on outdoor and environmental learning, green parklets could be designed to educate people about the importance of urban nature and at the same time function as green public spaces. This could be implemented in many ways. One recurring topic in the literature study concerns the flying habitat generalists that are already handling the urban matrix. Some of them are very important pollinators, that are vital for both our society and our ecosystem. Pollination is also a topic that is easy to grasp and fun to study. Including environmental learning in parklet design could make people see the potential of greener streets, increasing the demand leading to further development. Only when the urban matrix has gone green, with more qualitative habitats and connectivity in between, can biodiversity increase in our cities. In parklet design promoting biodiversity it´s therefore important to always have the shortterm and long-term perspective in mind, as well as working with different scales and being aware of the deficiencies of your design. To further study how the theory of the the possibilities that emerged in the literature study relates to practice, as well as exemplifying how green parklets could actually be designed, a design proposal was made. The proposal called "Pollination Parklets” introduces two parklets based on two of the most important pollinator groups, wild bees and butterflies. The litterature study showed that semi-permanent parklets is to prefere, as well as using at least two parking lots (25 m2) in the design to initiate sustainability. This has been applied to both parklet proposals. The Pollination parklets are investigating how environmental learning could be introduced to people’s local environments in a new and interesting way. This by showing them the importance of our pollinators, hoping to give the streets, the people and our ecosystem a brighter and greener future

    Relationship-building meetings : what private forest owners expect in meetings with timber buyers

    Get PDF
    Med högre efterfrågan på skogsråvara ökar konkurrensen på inom skogsbranschen. Svenska skogsbolag är beroende av privata skogsägare för att kunna tillgodose tillräcklig mängd råvara till sina industrier. Skogsbolag som avser öka andelen lokala köp strävar därför efter att bli mer framgångsrika i möten mellan virkesköpare och skogsägare för att kunna skapa långvariga affärsrelationer. Studien syftade till att ta reda på vad privata skogsägare förväntar sig i möten med en virkesköpare. Baserat på resultatet gjordes en utvärdering av vilka rutiner virkesköpare hos skogsbolag bör arbeta efter för att möta förväntan, samt vilket verksamhetsstöd som organisationer behöver tillhandahålla. Studien visade att skogsägare önskar känna sig trygga och sedda i möten med virkesköpare, samt att det första mötet mellan parterna är avgörande för om ett förtroende och en långvarig relation kan utvecklas. Virkesköparen representerar organisationen och relationen till denne värderas högre än organisationen. Studien visade att gott bemötande från virkesköparen ansågs vara en förutsättning, tillsammans med personkemin, för att kunna utveckla ett samarbete med organisationen. Virkesköparen behöver visa intresse för skogsägaren, vara lyhörd för dennes mål, önskemål och behov. Vidare behöver tjänsteleveransen hålla hög kvalitet och utföras enligt avtal och överenskommelse för att uppfylla skogsägares önskemål. Om olägenheter skulle uppstå är det av största vikt att organisationen justerar dessa. Organisationen bör tillhandahålla stöd och rutiner som underlättar virkesköparens arbete i mötet med skogsägaren, för att säkerställa att denne har den information som behövs för att möta förväntan samt att alla skogsägare får ett likvärdigt bemötande. Vidare bidrar verksamhetsstöd till en kontinuitet som efterfrågas av skogsägare. Detta kan bidra till för förhöjd tjänstekvalitet och nöjdare skogsägare som i sin tur kommer välja ett fortsatt samarbete med organisationen och även sprida ett gott rykte.Competition has increased within the forest industry with a higher demand for forest raw materials. Swedish forest companies are dependent on private forest owners to be able to acquire enough raw material for their industries. Forest companies who intend to increase the proportion of local purchases and therefore strives to be more successful in meetings between timber buyers and forest owners to create long-term business relationships. This study aimed to find out what private forest owners expect in meetings with a timber buyer. Based on the results, an evaluation was made of which routines timber buyers at forest companies should work according to meet expectations, as well as which operational support the organization needs to provide. The study showed that forest owners want to feel safe and seen in meetings with timber buyers, and that the first meeting between the parties is crucial for whether trust and a long-term relationship can develop. The timber buyer represents the organization, and the relationship is valued higher than the organization. The study also showed that good treatment from the timber buyer was a prerequisite, together with personal chemistry, to be able to develop a collaboration with the organization. The timber buyer needs to show interest in the forest owner, be responsive to the forest owner’s goals, wishes and needs. Furthermore, the service delivery needs to maintain high quality and be carried out in accordance with the contract and agreement to fulfill the forest owner's wishes. If inconvenience should arise, it is of the utmost importance that the organization adjusts these. The organization should provide support and routines that facilitate the timber buyer's work in the meeting with the forest owner, to ensure that he has the information needed to meet expectations and that all forest owners receive equal treatment. Furthermore, operational support contributes to a continuity that is demanded by forest owners. This can contribute to increased service quality and more satisfied forest owners, who in turn will choose continued cooperation with the organization and spread a good reputation

    The effects of mining on a community in rural Syria

    Get PDF
    This thesis addresses the effects of mining activities on the livelihoods of rural people and their environment in ArRuhayba, close to Syria’s capital Damascus. A public and political debate about such potential effects has not existed yet in Syria, probably because of the ongoing civil war in the country, which leaves a research gap to be filled. Hence, this study explores the effects mining activities have on the livelihoods of local people, who live in the proximity of the mining area, their environment and their lifeworld at large. This is conducted through using different methods to generate data, such as various forms of interviews and participant observation of the mining sites. The study finds that while mining activities have negative effects on the environment and the lifeworld of local people, the effects on the livelihood system of local people varies between negative effects and positive effects, that are influenced by multiple factors, such as the geographical location; the participation of the local people in carrying out the activities of mining; and the nature of activity. In addition, the study finds that the market economy approach influences the actors in the field who underestimates protecting the environment and considering sustainability. This facilitates the acceleration of mining activities and their expansion over a large geographical area in the absence of relevant regulatory rules and the absence of the participation of local people in the decision-making process. The findings of this study support the findings of many previous studies that address the same phenomenon. Consequently, the study fills a research gap in the field of rural development and natural resource management by addressing another context with different conditions

    Blicka ut och blicka in

    Get PDF
    Sveriges naturvårdslag säger att vi har en skyldighet att skydda natur och att göra den tillgänglig för alla. Naturområden skyddas av flera anledningar, dels för bevarandet av biologisk mångfald, dels för att ge människor plats för friluftsliv. Examensarbetet syftar till att föreslå en gestaltning för ett naturområde som bidrar till ökad tillgänglighet och orienterbarhet, och som samtidigt förhåller sig till befintliga naturvärden. Torsburgens naturreservat på östra Gotland är ett naturområde där det idag inte har gjorts några större satsningar för att öka tillgängligheten, liksom de flesta andra i länet och är därmed lämpligt som projektplats för att kunna besvara frågeställningar. Genom en gestaltning har jag arbetat med tillgänglighet utifrån två aspekter, genom att öka den fysiska tillgängligheten och den kognitiva. Förslagets utformning är inspirerad av den platsspecifika karaktären och ämnar att bibehålla områdets känsla av orörd natur. Ett introducerande platsbesök inledde gestaltningsprocessen. Inledningsvis gjordes en landskapskaraktärsanalys inspirerad av Trafikverkets Integrerad Landskapskaraktärsanalys (ILKA). Analysen och platsbesök identifierade naturreservatets naturvärden, målpunkter, samt vilka gestaltningsåtgärder som var lämpliga. Parallellt med analysarbetet gjordes en studie av referensplatser. Syftet var att undersöka och inspireras av samtida gestaltning i områden med liknande funktion eller förutsättningar som projektplatsen. För att kunna svara på arbetets frågeställningar utvecklades ett förslag, metoden var gestaltning. Gestaltningen utgår från programpunkter och en bärande idé som bygger på arbetets kunskapsöversikt, analys och platsbesök. Den bärande idén utgår från ett förhållningssätt som bygger på att gestaltningen sker på naturmiljöns villkor. Genom en gestaltningsprocess utvecklades förslaget Blicka ut och blicka in: Ett gestaltningsförslag för Torsburgens nya naturstig. Förslaget innefattar tillägg vars syfte är att öka tillgängligheten, samt synliggöra områdets natur och målpunkter. Ett längre och ett kortare stråk tar besökaren runt naturreservatet, i det svårframkomliga brandområdet har en spång adderats som ett komplement för att minska åverkan på miljön och samtidigt bibehålla karaktären. Runt om i reservatet har det tillkommit sociala ytor som tar fasta på områdets utsikter. En utveckling av områdets skyltprogram ökar orienterbarheten och förståelsen för naturreservatet, samtidigt som det är en metod för naturskydd. Gestaltningen ger möjligheten för fler att besöka och ta del av Torsburgens naturreservats speciella natur och historia.Sweden's Nature Conservation Act says that we have an obligation to protect nature and to make it accessible to everyone. Natural areas are protected for several reasons, partly for the preservation of biological diversity, partly to give people space for outdoor life. The degree project aims to propose a design for a natural area that contributes to increased accessibility and orientation, and which at the same time relates to existing natural and cultural values. The Torsburgen nature reserve in eastern Gotland is today an outdoor area that does not meet the requirements for accessibility, like most others in the county. Through a design, I have worked with accessibility based on two aspects, partly by making the area physically accessible, partly by making it cognitively accessible. In the proposal, there is a focus on designing based on the site-specific character in order to maintain the feeling of untouched nature. A site visit introduced the place and started the design process. Initially, a landscape character analysis inspired by the Swedish Transport Administration's Integrated Landscape Character Analysis (ILKA) was carried out. The analysis and site visit identified the nature reserve's natural values, target points, and which design measures were appropriate. In parallel with the analysis work, a study of reference sites was carried out. The aim was to investigate and be inspired by contemporary design in areas with similar function or conditions as the project site. In order to be able to answer the work's questions, a proposal was developed. The method was embodiment. The design was based on program points and a supporting idea based on the work's knowledge overview, analysis and site visits. The main idea is based on an approach that is based on the creation taking place on the conditions of the natural environment. Through a design process, the proposal Look out and look in was developed: A design proposal for Torsburgen's new nature trail. The proposal includes additions whose purpose is to increase accessibility, as well as make the nature of the area and target points visible. A longer and a shorter path takes the visitor around the nature reserve, in the difficult-to-access fire area, a span has been added as a supplement to reduce the impact on the environment and maintain the character. Around the reserve, social spaces have been added that take advantage of the area's outlook. A development of the area's sign program increases orientation and understanding of the nature reserve, while at the same time it contributes to protecting the natural environment. The design provides the opportunity for more people to visit and take part in Torsburgen nature reserve's special nature and history

    Tillväxt på smågrisar med tre olika utfodringsstrategier

    Get PDF
    Digivningsperioden lägger grunden för en lyckad avvänjning. Suggans mjölk är smågrisarnas huvudsakliga energikälla men är inte tillräcklig för att uppnå maximal tillväxtpotential och smågrisarna behöver därför tillskottsfoder (Ivarsson 2007). Traditionellt i Sverige sker tillskottsutfodring manuellt genom handutfodring. På senare år så har det även utvecklats mjölkkoppar till smågrisarna och den nyaste innovationen är blötfoderanläggningar till smågrisar i grisningsavdelningen. Syftet med examensarbetet har varit att undersöka tre olika utfodringsstrategier i tre olika besättningar. Utfodringsstrategierna har varit handutfodring, mjölkkoppar samt WEDA Nutrix blötfoderanläggning. Gård A använde sig av WEDA Nutrix, Gård B använde sig av mjölkkoppar och Gård C utfodrar på traditionellt sätt för hand med torrfoder. Vägning genomfördes tre gånger under digivningstiden. Första vägningen gjordes vid 7–9 dagars ålder räknat från födsel och sista vägning gjordes vid 28–33 dagars ålder räknat från födsel. Det finns skillnader i tillväxt mellan de olika utfodringssystemen men medelvikten på samtliga gårdar når målet på åtta kg i avvänjningsvikt. Statistiskt säkerställd skillnad finns mellan Gård A mot Gård B och Gård C för vikt vid vägning tre. Numeriskt hade Gård A hade minst variation och lägst avvänjningsvikt. Gård B hade en kraftig tillväxt mellan vägning ett och två. Efter avstängning av mjölkkoppar avtog tillväxten något. Gård B hade även en högre variation än de andra gårdarna. Gård C hade högre variation än gård A men en högre avvänjningsvikt. Slutresultatet kan påverkas av åldersskillnaden vid tredje vägningstillfället, där smågrisarna på Gård A var 1–2 dagar yngre än smågrisarna på övriga gårdar. För att kunna dra ytterligare slutsatser med systemen hade det behövts vidare studier på den fortsatta tillväxten efter avvänjning, för att se om de positiva effekterna påverkar grisarna efter avvänjning och om resultatet där skulle skilja sig mer än i grisningsavdelningen.The lactation period lays the foundation for a successful weaning. The sow's milk is the piglets' main source of energy but is not sufficient to achieve maximum growth potential and the piglets therefore need supplementary feed (Ivarsson 2007). Traditionally in Sweden, supplementary feeding is done manually by hand feeding of dry feed. In recent years, milk cups have also been developed for the piglets, and the newest innovation is wet feeding facilities for piglets in the farrowing department. The aim of the thesis has been to investigate three different feeding strategies in three different herds. The feeding strategies have been hand feeding, milk cups and WEDA Nutrix wet feeding system. Farm A used WEDA Nutrix, Farm B used milk cups and Farm C traditionally feeds by hand with dry feed. Weighing was carried out three times during the milking period. The first weighing was done at the age of 7–9 days counted from birth and the last weighing was done at the age of 28–33 days counted from birth. There are differences in growth between the different feeding systems, but the average weight on all farms reaches the target of eight kg in weaning weight. A statistically guaranteed difference exists between Farm A versus Farm B and Farm C for weight at weighing three. Numerically, Farm A had the least variation and the lowest weaning weight. Farm B had strong growth between weighing one and two. After the suspension of milk cups, growth slowed slightly. Farm B also had a higher variation than the other farms. Farm C had higher variation than farm A but a higher weaning weight. The result may be affected by the age difference at the third weighing, where the piglets on Farm A were 1–2 days younger than the piglets on the other farms. In order to draw further conclusions with the systems, further studies on the continued growth after weaning are needed, to see if the positive effects affect the pigs after weaning and if the results there would differ more than in the farrowing department

    Hur påverkas bakbenets temperatur, omkrets och diameter av olika typer av bandageunderlägg?

    Get PDF
    Tidigare studier visar att ledproblem var ett vanligt förekommande problem hos sporthästar. En av dessa ledproblem som hästen kan lida av är svullnader i lederna på hästens ben. En svullnad i hästens leder kan uppkomma på grund av ökad ledvätska i leden och det är den typen av svullnad som med talspråk ofta kallas för galla. Svullnaden kan vara ofarlig för hästen men det kan också vara en indikation på ledproblem som bör uppmärksammas av hästägaren. Svullnaden i benen kan också uppkomma efter intensiv och upprepad träning. Syftet med studien är att jämföra tre behandlingsmetoder för svullnad i hästens ben; två metoder med olika typer av bandageunderlägg och en behandling där hästen står utan bandageunderlägg. Det besvarades genom frågeställningarna; Kan olika typer av bandageunderlägg minska gallor i hästens kotled och kotsenskida? Kan olika typer av bandageunderlägg påverka hudens temperatur på hästens bakben vid kotled och kotsenskida? Studien är en kvantitativ studie och utformades som en change-over design med washout period av ett dygn mellan mätningar. Studien pågick under elva dagar och innefattade nio varmblodshästar (7–24 år) från Ridskolan Strömsholm. Resultatet visade att Back on Track® och ordinärt bandageundelägg hade en signifikant skillnad (p=0,002) i temperatur (mätt med termistor), diameter kotled (mätt med skjutmått) och omkrets kotled (mätt med måttband). Medelvärdet för temperaturen för Back on track® och ordinärt bandageunderlägg var 34.3±0.31C, för diameter kotled 85.1±0.25 mm (Back on Track®) och 85.0±0.25 mm (ordinärt bandageunderlägg) och för omkrets 31.2±0.11 cm (Back on track®) och 31.1±0.11 cm (ordinärt bandageunderlägg). Slutsatsen som kunde dras var att med ett bandageunderlägg minskar omfång i diameter och omkrets vid kotled och kotsenskida och ger en förhöjd temperatur i huden på benen. Vilket material som används till ett bandageunderlägg har ingen signifikant påverkan på varken diameter, omkrets eller temperatur på benet.Previous studies show that joint problems were a common problem in sport horses. One of these joint problems that the horse may suffer from is swelling of the joints on legs. A swelling of the joints can occur due to increased joint fluid in the joint. The swelling can be harmless to the horse, but it can also be an indication of joint problems that should be brought to the attention of the horse owner. The swelling of the legs can also occur after intense and repeated exercise. The aim of the study is to compare three treatment methods for swelling of the horse's legs; two methods with different types of wool bandages and a treatment where the horse is without wool bandages. It was answered through the questions; Can different types of stable bandages reduce bile in the horse's vertebrae and vertebral sheath? Can different types of stable bandages affect the skin's temperature on the horse's hind legs at the fetlock joint? The study was a quantitative study and was designed as a Change-over design with a washout period of one day between measurements. The study lasted for eleven days and included nine warmblood horses (7–24 years) at the riding School Strömsholm. The result showed that Back on Track® and ordinary bandage had a significant difference (P=0.002) in temperature (measured with thermistor), Diameter fetlock joint (measured by caliper) and circumference fetlock joint (measured by tape measure). The mean temperature for Back on track® and ordinary bandage was 34.3±0.31C, for diameter fetlock joint 85.1±0.25 mm (Back on Track®) and 85.0±0.25 mm (ordinary bandage) and for circumference 31.2±0.11 cm (Back on track) and 31.1±0.11 cm (ordinary bandage). The conclusion was that wool bandages reduce the circumference and in the diameter at the ancle joint and vertebral sheath and gives an increased blood circulation which is shown by elevated temperature in the leg. The material used for stable bandages had no significant effect on either the diameter, circumference, or the temperature of the leg

    The role of marketing to avoid product returns in online shopping

    Get PDF
    The increasing alarm about global climate change and the related consequences on the planet and humankind has raised the voices to adopt sustainability within organisations and businesses. The wide spread of the internet and smart devices allowed many consumers to buy their needs through smart devices without the need to travel to physical stores. Online shoppers are expected to increase significantly in the coming years. The online shopping environment allows a wide range of products and provides convenience to online consumers. However, this led to a significant increase in product returns among different retail sectors, including the clothing and home electronic sectors. The high products return folds into many disadvantages to the environment, society, and economics, such as higher CO2 emissions because of the increased number of shipping trips when products are returned. The increase in the number of packages and loss of product values when a consumer returns a product also significantly impacts sustainability. The high competition in the online shopping market drive marketers to provide different services such as free and fast delivery and flexible returns policies to maintain competitive advantages and thus encourage consumers to buy their products. Moreover, the legal structure protects consumers right to return the products, which hinders marketers from strict their return policies to reduce product returns. However, reducing the high returns is still in the interest of online retailers as high returns encounter higher operating costs such as repackaging and the deprecation value of the products. Many studies have explored the importance of reducing high product returns in online shopping and mentioned the different disadvantages for companies, the environment, and society. Other studies have investigated the reasons behind the high product returns within the online shopping environment. In contrast, fewer studies have addressed solutions to overcome the problems of high product returns. Because online consumers make their purchase decisions without physical interaction with the brand or its products, online consumers need more help to ensure that their purchase decisions can fulfil their desires and needs. The author of this paper suggests that marketers can help consumers make better purchase decisions since reducing product returns fall in the company's interest. Marketers are essential actors in targeting consumers to buy products. Marketers can help to create a better fit between the consumers and the products they purchase online and thus make a better purchase decision and avoid returning the products. Therefore, this paper explores how marketers can help consumers to make better purchase decisions and thus avoid product returns. Moreover, the study investigates how digital marketing tools can help marketers reach targeted consumers and help consumers to make better purchase decisions. The paper follows a case-study research design. The data were collected through semi-structured interviews with defined individuals who have worked in eCommerce and digital marketing. The paper adapts in-depth narrative analysis to interpret marketers' practices during the consumer's decision journey to help them make better purchase decisions. In conclusion, the findings show that marketers can play an essential role in helping online consumers make better purchase decisions and thus avoid returning products. To avoid products, return marketers have to target consumers who are in need or interested in their products and convey detailed and truthful information about the brand and products. Digital marketing enabled marketers to reach their targeted consumers and optimise communications with them like never been, which in turn helps consumers to make better purchase decisions and thus avoid products return

    17,973

    full texts

    18,101

    metadata records
    Updated in last 30 days.
    Epsilon Archive for Student Projects
    Access Repository Dashboard
    Do you manage Open Research Online? Become a CORE Member to access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard! 👇