eJournal Jabatan Pendidikan Politeknik dan Kolej Komuniti
Not a member yet
    436 research outputs found

    Pematuhan Etika Berpakaian Pelajar Semester 1 Jabatan Teknologi Maklumat dan Komunikasi Sesi Jun 2017

    Get PDF
    Kajian tindakan ini dijalankan untuk memastikan pematuhan etika berpakaian pelajar Jabatan Teknologi Maklumat dan Komunikasi bagi semester 1 Sesi Jun 2017. Responden yang terlibat adalah seramai 80 orang pelajar. Objektif kajian tindakan ini adalah untuk mengenalpasti pengetahuan pelajar tentang etika berpakaian di PSMZA, untuk mengenalpasti pemahaman pelajar tentang etika berpakaian di PSMZA dan untuk mengenalpasti penerimaan  pelajar tentang etika berpakaian di PSMZA. Kaedah kajian yang digunakan ialah kaedah kajian kuantitatif dan kualitatif. Pengumpulan data kajian dibuat melalui edaran soal selidik dan temu bual. Hasil perlaksanaan kajian ini mendapati bahawa hanya 85.7% responden memahami etika berpakaian di politeknik yang diberi semasa minggu transformasi dan 61% sahaja responden bersedia untuk membimbing rakan sebaya tentang etika berpakaian di politeknik. Sebanyak 98.1% responden bersetuju diadakan kempen-kempen kesedaran terhadap kepentingan pematuhan etika berpakaian di dalam politeknik. Perlaksanaan tindakan diselesaikan dalam tempoh 8 minggu. Perancangan tindakan yang dijalankan ialah pensyarah memperuntukkan masa selama 10 minit pada setiap waktu kuliah untuk memeriksa rupa diri  pelajar, bekerjasama dengan Jabatan Hal Ehwal Pelajar untuk mengadakan kempen-kempen kesedaran dan bekerjasama dengan unit disiplin jabatan dengan mengadakan pemeriksaan rupa diri secara mengejut. Hasilnya didapati terdapat peningkatan terhadap pematuhan etika berpakaian pelajar semester 1 Jabatan Teknologi Maklumat dan Komunikasi Sesi Jun 2017 di PSMZA

    Pembangunan Dan Penilaian Tahap Kesesuaian Penggunaan E-Modul Asas Animasi 2D Berdasarkan Teori Konstruktivisme Model Needham 5 Fasa

    Get PDF
    Proses pelaksanaan pembelajaran dan pengajaran (PdP) pensyarah pada masa kini seharusnya menggunakan teknik dan kepelbagaian penyampaian yang lebih menarik. Namun begitu, masalah wujud apabila pelajar sukar untuk memahami penerangan secara lisan, berbanding penggunaan aplikasi yang mempunyai gabungan elemen multimedia seperti grafik, teks, video, audio, animasi dan interaksi yang diterapkan dalam pelaksanaan PdP. Pembangunan bahan bantu mengajar bagi subjek Asas Animasi 2D sangat diperlukan sebagai sumber rujukan utama kepada pelajar dan pensyarah. Oleh itu, kajian ini dijalankan bertujuan untuk membangunkan dan menilai E-Modul Asas Animasi 2D yang berpandukan kepada kurikulum subjek Asas Animasi 2D, Program Sijil Kolej Komuniti Malaysia. Pembangunan e-modul ini berdasarkan kepada Teori Konstruktivisme Model Needham 5 Fasa dan kajian berbentuk kuantitatif ini dilaksanakan berdasarkan model ADDIE. Kajian ini telah dijalankan ke atas empat orang pakar bertujuan untuk mendapatkan maklum balas tentang kebaikan dan kelemahan aplikasi yang dibangunkan. Hasil dapatan kajian menunjukkan bahawa maklum balas daripada pakar adalah positif dan dapatan analisa kajian menunjukkan E-Modul Asas Animasi 2D yang telah dibangunkan memenuhi kriteria dan keperluan pengguna. Diharapkan, melalui pembangunan e-modul ini dapat membantu pembelajaran yang lebih interaktif. Disamping itu penerangan yang mudah secara visual ini secara tidak langsung dapat membantu pemahaman pelajar dengan lebih baik. E-Modul Asas Animasi 2D ini boleh diperluaskan penggunanya dalam pelaksanaan PdP yang menarik dan lebih berkesan

    Agarwood Chips Grading Using Neural Network

    Get PDF
    This paper presents the use of image processing and artificial neural network to determine the grade of the agarwood chips and thus provide an automated approach of the agarwood grading system. A backpropagation multilayer feedforward neural network has been used in this study with the inputs taken from the texture measurements and density. The relationship between texture properties and the price of agarwood was analyzed in order to select suitable input parameter to the neural network model. As a result, neural network architecture with three input parameters taken from textural properties and one input parameter taken from density, one hidden layer, seven number of neurons in hidden layer and three output layers has been developed. Neural network with algorithm of traincgp and transfer function of purelin and tansig give the best result of prediction with the percentage of accuracy of 60.58%

    Mengenalpasti Aplikasi Kemahiran Berfikir Aras Tinggi Dalam Pembelajaran Teknikal Di Kolej Komuniti Rompin, Pahang

    No full text
    Kajian ini dibuat bertujuan untuk mengenalpasti sejauhmana kemahiran aras tinggi dapat diaplikasikan dalam pembelajaran teknikal oleh pelajar di Kolej Komuniti Rompin, Pahang. Elemen yang diukur adalah kemahiran berfikir kritikal, kemahiran menyelesaikan masalah, kemahiran belajar dan kemahiran membuat keputusan. Seramai 56 orang responden telah digunakan sebagai sampel di dalam kajian ini.  Instrumen kajian yang digunakan ialah satu set soal selidik yang mengandungi 37 item berdasarkan kepada skop kajian.  Soal selidik terbahagi kepada dua bahagian iaitu Bahagian A, melibatkan latar belakang responden dan Bahagian B melibatkan respon responden terhadap aspek yang dikaji.  Perisian SPSS (Statistical Packages For Social Science) versi 21.0 digunakan untuk memproses data. Analisis kajian dibuat berdasarkan frekuensi, peratusan dan min. Dapatan kajian menunjukkan responden memberi jawapan yang positif terhadap keempat-empat elemen yang dikaji dengan jumlah keseluruhan min persoalan kajian menunjukkan nilai yang memuaskan.  Elemen tertinggi ialah kemahiran belajar. Elemen kemahiran berfikir aras tinggi yang lain iaitu kemahiran menyelesaikan masalah, kemahiran berfikir kritikal dan kemahiran membuat keputusan kurang diaplikasikan dan berada ditahap memuaskan sahaja. Implikasi kajian ini ialah kemahiran berfikir aras tinggi juga perlu diterapkan kepada pelajar teknikal terutamanya kemahiran menyelesaikan masalah

    Compact Microstrip Bandpass Filter

    Get PDF
    In microwave communication systems, the bandpass filter is an essential component, which is usually used in both transmitter and receiver. Parallel-coupled microstrip bandpass filter is one of the most popular filters in communication systems. However, this arrangement of parallel-coupled microstrip bandpass filter gives disadvantage in terms of size where the arrangement of this topology results in an electrically large in size of the filter. Therefore, this research focuses on designing a compact microstrip bandpass filter by using Sonnet Lite software at centre frequency of 3.2GHz with the bandwidth of 400MHz. Besides, the design of the compact microstrip bandpass filter has achieved the objective when it successfully reduced the overall size to about 70% as compared to the size of conventional filter, which is parallel-coupled microstrip bandpass filter. Both filters give the same performance based on their frequency responses. The design also has successfully fabricated and measured by using network analyzer software to verify the simulated results obtained earlier. Although there is slightly mismatch between the simulated and measured frequency response due to some fabrication errors and variation of material properties, the design of filter is not affected since the results obtained from the designing process by using Sonnet Lite software are still valid and can be used in future improvement of the design

    Improvement of Bottling Production Line Using Simulation Method

    Get PDF
    In order to demonstrate changes in business, most of today’s world multinational companies are using wide spectrum of computer- based technologies to assist them in managing many business data information and performance. Simulation method is one of the ways to help these decision makers. The simulation method in this study was based on ARENA® software. The animated simulation models for comparing the actual and improved line were successfully developed in this study. All related data information regarding to the manufacturing line are collected and analysed. After considering all possible factors, it is found that by the model simulations, the improvement could be done and the efficiency is 99.3% which is better compared to current efficiency that has value of 72%. The number of waiting unit in the filler section which represents the bottleneck in the current line also has been eliminated from 3257 unit to 0 (zero). Both efficiency calculation and number of waiting unit in the line are work as validation indicator in this study. The study also generated cost savings which will give benefit after 3 months of investment

    Pengaruh Pendekatan Pensyarah Terhadap Sikap Dan Gaya Pembelajaran Pelajar Dalam Matematik Kejuruteraan Satu

    Get PDF
    This study was carried out to identify the influence of lecturers approach related with attitudes and learning styles on Mathematics Engineering 1 Course at Kota Bharu  Polytechnic. A total of 443 students were selected as respondents to identify the influence of lecturers approach that influenced the attitude and style of student learning in the Mathematics Engineering 1 Course. Questionnaires were used to collect the data and analyzed using the Statistical Package for Social Sciences (SPSS) 20.0 by using T-Test and Annova. The results showed that respondents had positive attitudes while studying Engineering Mathematics 1 at Polytechnic. The study also found that the interest, role of lecturers and teaching approaches can influence the student learning styles in Engineering Mathematics 1. The overall findings also show that students have a positive thinking about the attitudes and learning styles of lecturers approach and syllabus of Engineering Mathematics 1 Courses

    Preliminary Study of Energy and Cost Saving Potential of Lighting System in Teaching Building

    Get PDF
    Energy consumption and potential for energy savings become more intensive in public buildings in order to improve energy performance. This study will identify the current occupancy, lighting use patterns and lighting performance in G3 Block B teaching building of University Tun Hussein Onn Malaysia. In order to determine the energy saving potential and strategies for lighting system in the building, a series of data collection will conduct to the effects of occupancy and lighting use patterns to display the lighting energy consumption and notice to the lighting energy waste of the case study building. Moreover, lighting performance of the teaching building is also been measured to identify potential of improving the usage of lighting system. Based on the experiment data obtained, there are 36% - 46% of the total hour usage of lighting system are needlessly in the unoccupied lecture rooms. The energy and cost saving potential strategies are suggested to improve the usage and efficiency of the lighting system in the teaching building towards energy conservation

    Knowledge Sharing Initiative in Institution of Higher Learning: The Lifelong Learning Plan

    Get PDF
    Institutions of Higher Learning (IHL) should cultivate the practice of sharing knowledge among lecturers for the purpose of preserving knowledge. One way to keep the knowledge is through the establishment of a knowledge repository. This repository can be used by lecturers for teaching and learning, research and collaboration. However, some of IHLs do not take the initiative to form the repository. Apart from addressing the problem of missing knowledge, a study on the factors of influencing knowledge sharing which lead to the establishment of the repository such as transferred lecturer and those who are retired and furthering their study should be emphasized because there are lack of studies about it. The objective of this study is to investigate the factors of knowledge sharing practices among the lecturers in IHLs. The approach used in this study is a quantitative study and questionnaires were utilised as the main tool to collect the data. There were 147 respondents from public IHLs from Faculty of Information and Communication Technology (ICT) lecturers in the Klang Valley. This study was based on the theory of technology, organization and environment (TOE). From the analysis of this study, it has proven that ICT factors, organization and lecturers have significant relationship to knowledge-sharing practices at IHL. Apart from that, knowledge sharing practices have a significant relationship to the establishment of the repository. The results of this study can serve as a guideline to Faculty of Information and Communication Technology (ICT) at public IHL in their planning and direction regarding knowledge sharing initiatives, especially among lecturers for the purpose of forming a single repository and in preserving knowledge

    The Effect of Family Business Background on Entrepreneurial Intention Among Students: A Case Study of Kolej Komuniti in Kelantan

    No full text
    Entrepreneurial education needs for students to ability search for knowledge and willingness to learn entrepreneurship and it is related to intention in developing their interest in entrepreneurship. This research aims to establish the role of subjective norm, attitude and institutional support on the entrepreneurial intention referred Theory of Planned Behavior (TPB) and effect the moderating of family business background on this relationship among students from Kolej Komuniti in Kelantan (KKK). The data analyzed using SPSS Amos to test and claim of hypothesis. The survey among the students by taking a simple size of 205 students in different courses and limited on the students of KKK enrolled in the March 2016 intake. The research findings are intend to aid policy makers in promoting and developing future entrepreneur in Community Colleges especially in social and educational areas through strengthening institutional support in subject areas deemed to significantly affect entrepreneurial intention among the students. The findings suggested that there are relationship between subjective norm, institutional support and entrepreneurial intention. The effect of moderation is partially moderated by family business background between subjective norm and entrepreneurial intention. Implication for education institutions and policy makers to bring forth students’ entrepreneurial intention to increase entrepreneurship among students KKK are proposed. Keywords: Theory of Planned Behavior, entrepreneurial intention, institutional support, family busines

    416

    full texts

    436

    metadata records
    Updated in last 30 days.
    eJournal Jabatan Pendidikan Politeknik dan Kolej Komuniti
    Access Repository Dashboard
    Do you manage Open Research Online? Become a CORE Member to access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard! 👇