OJS NTU Journal
Not a member yet
669 research outputs found
Sort by
The role of Islamic Faith in The Face of Social and Media Globalization in Light of Digital Transformation
Get PDFPraise be to God, Lord of the worlds, and prayers and peace be upon the one who was sent as a mercy to the worlds, and upon his family and companions described as charitable, and those who followed their righteous path.As for after. The Muslim community today faces great challenges and dangerous phenomena that often lead to the loss of its cohesion and the dispersal of its children and their loss on several levels, including the level of faith, psychological, intellectual and scientific, including those related to values ??and morals..., especially as the world is witnessing successive changes, carrying ideas in multiple directions, Its owners are working to publish it in light of the digital transformation that depends on the advanced media from the Internet and satellite channels, which are combined by the so-called (globalization) term, especially since the Islamic community is at the forefront of what is meant by globalization, and in order to look at the effects of globalization on societies and find solutions I wanted to make my point I write this research tagged (the role of the Islamic faith in the face of social and media globalization in light of digital transformation)
Effect of Bee Population and Bee Venom Milkingon Bee Worker's Daily Mortality and Some Physiological Characters
Get PDF The current study was conducted in the apiary of the College of Agriculture & Forestry/ University of Mosul during the year results that showed the highest mean amount of bee venom for the interaction reading0.1207 mg/colony in the treatment of milking bee population of 10 frames (TMV2) during the period from 7-12/8/2021 compared with the lowest mean interaction of 0.0067 mg/colony which was recorded during the period from 16-21/10/2021 for the same treatment. However, the highest mean interaction for the treatment of milking bee venom population was 5 frames (TMV1) during the period from 21-26/8/2021 which was 0.0810 mg /colony compared with the lowest mean of 0.0023 mg/colony during the period from 16-21/10/2021 for the same treatment. As for the treatments general mean, the highest mean was recorded in the TMV2 treatment which amounted to 0.0644 mg/colony compared with the lowest general mean of zero mg/colony in the TCM2 treatment. As for the milking treatment of TMV1,the highest mean was recorded 0.0305 mg/colony in the TMV1 treatment compared with the lowest average of zero mg/colony in the TCM1 treatment. As for the process effect of the bee venom milking on daily mortality of workers, the daily mortality was increased by 3.47 worker/day in TMV2 which recorded a mean of 6.99 worker/day compared with the TCM2 treatment which, in turn, recorded a mean of 3.52worker/day. As for the treatments with a bee population of five frames, the daily mortality of workers was increased by 3.2 worker/day in the treatment of TMV1 treatment which recorded the lowest mean of 5.78worker/day compared with the TCM1 treatment which recorded a mean of2.58worker/day. Regarding the general mean of the fat content, the statistical analysis did not show any significant differences between the two treatments TMV2 and TCM2 whose means reached 21.10 and 20.93 % respectively. As for the treatments with fat content of five frames, the highest mean was recorded in a treatment TMV1 amounting to17.50 % compared with the lowest mean which was 15.38 % recorded in TCM1 treatment. As for the Nitrogen content in treatments with a bee population of 10 frames, the highest mean was recorded in the TMV2 treatment which amounted to9.37 % compared with the lowest mean in the TCM2 treatment which amounted to 8.11%.The statistical analysis did not show any significant differences for the effect of milking bee venom in the Nitrogen content for the treatments with a bee population of five frames, and the highest mean was recorded in the TMV1 treatment which amounted to7.77 % compared with the lowest mean of 7.75% which was recorded in the TCM1 treatment. As for the acidity (pH) in workers abdomen, the statistical analysis did not show any significant differences for the effect of milking bee venom in the acidity (pH) in workers abdomen for the treatments with a bee population of ten frames
Assessment of the gas turbine unit in Kirkuk gas power station using energy and exergy analysis.: Assessment of the gas turbine unit in Kirkuk gas power station using energy and exergy analysis.
No full textThe present study aims to evaluate and analyze the gas turbine power generation unit (K3) in the Kirkuk gas power station under actual weather conditions of (2017), which is located south of Kirkuk in the district of Taza. The (K3) unit has a production capacity estimated at (255 MW) at maximum load; the unit consists of a gas turbine and an air compressor connected to the generator via a common shaft and operates in the Joule-Brighton simple cycle. The current study dealt with the analysis of the energy and exergy for the mentioned unit based on the law of conservation of mass, the first law, the second law in terms of the influence of each of the factors (ambient temperature, compression ratio, and relative humidity). Two methods were used to simulate the working data; the first is simulation programming by Excel, and the other is by using CHEMCAD software; the average data have been used in the simulation process for each month in that year to evaluate the performance of the unit K3. The simulation results showed that the combustion chamber represents the most important part in the exergy destruction, and the largest energy rate can be obtained from fuel as chemical, and the results of both methods showed maximum energy and energy efficiency was around (37.67%) and (36.89%), respectively
Enhancing gasoline fuel chararcteristics and engine operation criteria using octan boosters
No full textThe increase of energy demand and environmental contaminations hearten the utilization of alcohol-based as a alternatives fuels in spark ignition (SI) engine. The fusel oil is a byproduct developed from a fermentation process with higher alcohol content. It has high-octane and slight exhaust emissions, there for it takes important place between the substitutes fuels. During this study, effect of used mixtures of pure low octane gasoline & fusel oil on engine exhaust emissions & performance have been estimated after water removal from fusel oil. A single-cylinder, four-stroke SI engine has been used in this tests. The inspections execute at different speeds. The test fuels mixed by fusel oil at ratio of 5%, 10%, 20%, and 30%. In each speed, the engine’s performance & emissions size have been conducted. During the investigations, it have been observed that the brake power (BP) and specified fuel consuming (SFC) rises as the size of fusel oil risen in the mixture
Effect of Winter Operating Conditions on the Performance of a PV/Trombe Wall: An Experimental Evaluation
Get PDF Trombe photovoltaic wall is well known for its ability to supply the building with thermal and electrical energy at the same time. The increase in the temperature of the solar panels leads to a decrease in electrical efficiency. The use of DC fans and water as a medium for cooling the panels improved thermal and electrical efficiency and enhanced the comfort conditions inside the building. The results showed that the Trombe wall with DC fans could reduce the demand for the rudder by Increasing the heat inside the building, as it reached the highest thermal efficiency at 37.5%. As for the system equipped with a heat exchanger recorded the highest electrical efficiency of 14%. Finally, the results showed that the use of DC fans improves the overall efficiency of the photovoltaic Trombe wall system
Design and Development of Real-Time Data Acquisition of Photovoltaic Panel Parameters via IoT
Get PDFAbstract
In recent years,there has been an urgent need in world for electricity. It has being increased constantly with the expansion of energy consumption via traditional energy sources which are depleting. The world has needed to turn to alternative energy, which is represented by renewable energy. The most important and most efficient of these is solar energy, and to get the maximum value of this energy with the highest efficiency, there should be direct monitoring of the performance of these solar panels. So, in this study, the Internet of Things (IoT) was used as a remote monitoring system to obtain the main factors like load current, terminal voltage, consumption power, temperature, humidity, and light intensity. The values were real and accurate, depending on the use of Adriano and sensors to measure the above-mentioned determinants and then using Wi-Fi technology to send the data that was processed in the circuit. Then the thing speak platform was used to display, analyze, and store the results in real-tim
Customer loyalty is an approach to responsive marketing An exploratory study in Vana Furniture Company in Iraq
Get PDFThe research seeks to identify how to achieve customer loyalty by employing companies for responsive marketing activities, that is, their response to consumers’ needs and desires, to achieve their satisfaction and then achieve loyalty. The field of design, innovation, and creativity, so the aim of the research lies in identifying the concepts of responsive marketing and customer loyalty and the relationship between them, because of its great importance in light of modern marketing trends, including the search for the latent needs and desires of consumers and achieving them by meeting them. To achieve the goal, a number of hypotheses were formulated, including that there is a significant correlation between responsive marketing in its dimensions and customer loyalty, as well as a significant effect of responsive marketing in achieving customer loyalty. The analytical descriptive approach was used through the use of the questionnaire tool, and the five-point Likert scale was used in this, and it was distributed to the individuals surveyed in the Vana Home and Office Furniture Company in the cities of Mosul and Erbil, and a number of statistical methods were used to extract the results from arithmetic means, frequencies and percentages, as well as On the measurement of correlation and influence relations by extracting the values ??of the simple, ordinal, regression coefficient of determination, the values ??of the coefficient of determination R2, the value of f, t and the degrees of freedom, and the research concluded a review of the most important conclusions, including: that responsive marketing fulfills the latent needs and desires of consumers, as well as competitive competition and achieving competitive advantage, and in light of Conclusions A number of proposals have been formulated, the most important of which are: The producing and marketing companies should identify the needs and desires of consumers through studying the market and competitors and collecting the necessary data that would enhance the position of the researched companies in the market and gain the largest possible number of consumers.
Keywords: responsive marketing, customer loyalt
Digital transformation and its role in spreading the Sunnah
Get PDFThe Sunnah is the inheritance of the Prophet, may God’s prayers and peace be upon him.. and the practical application of what the Noble Qur’an brought, and its knowledge is the most honorable science after the Book of God. Faith and their relentless efforts to take it.. and their long journeys in its path.. and their great interest in applying it in their lives and working with it. Hence, this topic was extremely important for its direct relationship with the most honorable sciences after the Book of God, which is the noble hadith of learning and teaching.. and control and memorization.. and request and dissemination. ...and in word and deed, and publish it on the interactive space of social medi
Describe of Arabidopsis Thaliana Plant as a Model Plant in Biotechnology
Get PDFArabidopsis thaliana plant has appeared as a promising model because it is self-fertilizing, which makes it preserve its characteristics and can produce thousands of seeds, which makes it ideal for conducting mutagenesis experiments. The identification of its selected traits is more clear because it has a relatively small genome. Also, the organization of the genome in it is simple and is especially suitable in genetic and biology experiments, as these plants represent small-sized and fast-rotating factories. The current study attempted to highlight the most important aspects and applications related to the use of this plant in various fields of biotechnology and to clarify its most important advantages
Evaluation of the Immunochromatography Assay's Diagnostic Performance for Quickly Detecting the Presence of COVID-19 Antigen in Patients with Positive PCR Results
Get PDFSevere acute respiratory syndrome coronavirus 2 (SAR-CoV-2) is the novel infectious disease agent that causes COVID-19. The laboratory confirmation of COVID-19 is based on nucleic acid-based virus genome sequencing and real-time PCR and serological methods, rapid antigenic testing. The aim of the study was to evaluate the diagnostic sensitivity of the immunochromatography method by comparing it with PCR in covid-19 diagnosis. The study involved 116 samples, 90 samples included covid-19 patients and 26 samples included healthy, as a control group. Two nasopharyngeal swabs (NP) were taken, one for an antigenic test cassette and the other swab for re-confirmation of the infection by a real-time RT-PCR. The result of this study showed that there was a significant difference (P value = 0.0001) between RT PCR and rapid Ag tests in patients and healthy groups. The low sensitivity recorded for rapid antigen detection kits was 69% and 70%, respectively, compared with the 100% sensitivity of PCR. This study demonstrated an elevated positive rate of rapid Ag positive during the period (8–14 days) of symptoms onset. This study concluded that the rapid antigen test is a helpful tool for detecting the presence of COVID-19 infection, but it may not be the best alternative due to its low sensitivity