Tarsus University Institutional Repository
Not a member yet
344 research outputs found
Sort by
Investigation of theses written in the departments of international trade and logistics management and international trade and logistics
Küreşelleşmenin beraberinde getirdiği hızlı teknolojik ilerleme ile beraber uluslararası
ticarette gelişmeler yaşanmış ve bu durum ülkeler arasında rekabet ortamının artmasına yol
açmıştır. Rekabet avantajı elde etmek isteyen işletmeler ticarete konu malları hızlı ve
güvenilir şekilde teslim edebilmek için lojistik sektörüne ihtiyaç duymaktadır. Uluslararası
ticaretin lojistik faaliyetlerin güçlenmesine katkı sağlaması, lojistik faaliyetlerin de
uluslararası ticaret işlemlerini kolaylaştırması bakımından uluslararası ticaret ve lojistik
arasında güçlü bir bağ olduğundan söz edilebilmektedir. Geçmişe nazaran daha karmaşık ve
kapsamlı bir yapı barındıran bu sektör, çalışan bireylerin de nitelikli olmasını
gerektirmektedir. Lisans eğitiminin bir üst basamağı olan lisansüstü eğitimde hem lisans
eğitiminde edinilen bilgi ve beceriler geliştirilmekte hem de yeni bilgi ve beceriler
kazandırılmaktadır. Bu durum herhangi bir bilim alanında uzmanlaşabilmek ve
yetkinleşebilmek adına lisansüstüne verilen önemi artırmaktadır. Lisansüstünde verilen
eğitimin yanında burada yazılan tezler de bir bilim dalında meydana gelen gelişmelerin ortaya
çıkarılmasında önemli rol oynamaktadır. Bu sebeple bu araştırmanın amacı Türkiye’de
Uluslararası Ticaret ve Lojistik ile Uluslararası Ticaret ve Lojistik Yönetimi Ana Bilim
Dallarında yazılmış lisansüstü tezleri içerik analizi yöntemiyle inceleyerek, bu tezlerle ilgili
genel bir profil ortaya koymaktır. Araştırmanın kapsamını YÖK’ün Ulusal Tez Merkezinden
elde edilen Uluslararası Ticaret ve Lojistik ile Uluslararası Ticaret ve Lojistik Yönetimi Ana
Bilim Dallarında yazılan 380 tez oluşturmaktadır. Bu tezler aracılığıyla elde edilen veriler
içerik analizi yöntemi ile sayısallaştırılmıştır. Bulgular frekans tablolarında sıklık ve yüzde
değerleri ile yüksek lisans ve doktora durumu ayrımı yapılarak sunulmuştur. Yapılan analiz
sonucunda en çok tezin Maltepe Üniversitesinde yazıldığı, tezlerin en fazla 2019 yılında
tamamlandığı, tezlerin yoğun olarak yüksek lisans programlarında, Türkçe dilinde, lojistik ana
konu başlığında, vakıf üniversitelerinde, nicel yöntemler kullanılarak yazıldığı, örneklem
ii
olarak en çok işletme ve veri setinin tercih edildiği, veri toplama yöntemi olarak çoğunlukla
anket yöntemine başvurulduğu ve analiz yönteminde sırasıyla frekans, korelasyon ve faktör
analizinin uygulandığı tespit edilmiştir.Along with the rapid technological progress brought about by globalization, there have been developments in international trade and this has led to an increase in the competitive environment between countries. Businesses that want to gain a competitive advantage need the logistics industry to deliver the traded goods quickly and reliably. It can be said that there is a strong link between international trade and logistics in terms of contributing to the strengthening of logistics activities in international trade and facilitating international trade transactions in logistics activities. This sector, which has a more complex and comprehensive structure compared to the past, requires working individuals to be qualified. In postgraduate education, which is a higher step of undergraduate education, both the knowledge and skills acquired in undergraduate education are developed and new knowledge and skills are gained. This situation increases the importance given to postgraduates in order to be able to specialize and become competent in any field of science. In addition to the postgraduate education, the theses written here also play an important role in revealing the developments in a branch of science. For this reason, the aim of this research is to examine the postgraduate theses written in the Departments of International Trade and Logistics and International Trade and Logistics Management in Turkey with the content analysis method and to present a general profile about these theses. The scope of the research consists of 380 theses written in the Departments of International Trade and Logistics and International Trade and Logistics Management obtained from the National Thesis Center of YÖK. The data obtained through these theses were digitized by the content analysis method. Findings are presented in frequency tables by making a distinction between frequency and percentage values, and master's and doctoral status. As a result of the analysis, the most theses were written at Maltepe University, the theses were completed in 2019 at the most, the theses were written intensively in master's programs, in Turkish, in the main topic of logistics, in foundation universities, using quantitative methods, by selecting business and data set as samples, It was determined that the survey method was mostly preferred as the data collection method and frequency, correlation and factor analysis were applied respectively in the analysis method
A research on the role of digital leaders in the formation of digital competence in Mersin province
Dijital kavramı genellikle elektronik süreçleri ve araçları nitelemek adına kullanılmaktadır. Genel olarak bilinen algının dışında dijital sadece elektronik cihazlar yerine verilerin de elektronik bir şekilde işlenmesi ve gösterilmesi anlamını da taşımaktadır. Bu bakış açısından değerlendirildiğinde dijital kavramı genellikle sonsuz bir döngüde devam eden iki bileşenli verilerin anlamlandırılma sürecidir. Dijital bilgi döneminde, enformasyon bilgiyi ve bilgi de bilgeliği sağladığından verileri işleyerek enformasyona dönüştürmek, gerçekleştirilen en ana eylemlerin başında gelmektedir. Bilgi dönüşümün hızlandırıcısı ve tetikleyicisidir. Bahsi geçen bu süreçte yaşamı sürdürebilmenin farklı bir yolu ise dijital dönüşüme uyum sağlayabilmektir. Bu kapsamda dijital bilgi döneminde dijital dönüşüm, dijital eğitim, dijital toplum ve dijital yeterlilik kavramları oldukça önemlidir. Yapmış olduğumuz çalışmada dijital toplum ve dönüşüm temel konulardır. Ayrıca bu kavramların merkezinde ise daima insanların bulunduğu da bir gerçektir. Dijital bilgi döneminde oldukça önemli pozisyonlarda bulunan dijital liderler, küresel bir bakış açısına sahip, dijital okuryazarlığı bulunan, çeşitli yaş grupları ve kültürler ile çalışabilen katılımcı ve yeniliğe açık olan liderlerdir. Bu anlamda bu tez çalışması, dijital dönüşümün işletmeler açısından kritik öneme sahip olduğunu vurgulayarak iş akış süreçlerinde dijital yetkinliğe sahip dijital liderlerin işletmelerdeki etkisini keşfetmeyi amaçlamaktadır. Bu tez çalışması kapsamında, Mersin ilinde teknoloji odaklı farklı işletmelerden 51 katılımcı ile görüşülmüştür. Karma araştırma desenine sahip olan bu tez çalışmasında nitel ve nicel veriler, eş zamanlı olarak hem çevrimiçi ortamda hem de yüz yüze olacak şekilde toplanmıştır. Elde edilen veriler, SPSS 22.0 ile analiz edilmiştir. Analiz sonucunda, Mersin ilindeki işletmelerin dijital dönüşümün farkında olduğu, dijital liderlerin bu süreçte dijital örgüt kültürü oluşturduğu ve dijital yetkinliğe sahip dijital neslin işletme bünyesine kazandırılmaya gayret edildiği görülmüştür.The concept of digital is often used to characterize electronic processes and tools. Apart from the generally known perception, digital also means the processing and display of data in an electronic way instead of just electronic devices. From this point of view, the concept of digital is usually the process of making sense of two-component data that continues in an endless cycle. In the digital information era, since information provides information and information provides wisdom, converting data into information by processing is one of the most important actions performed. Information is the accelerator and trigger of transformation. A different way to sustain life in this mentioned process is to adapt to digital transformation. In this context, the concepts of digital transformation, digital education, digital society and digital competence are very important in the digital information period. In the work we have done, digital society and transformation are the main issues. In addition, it is a fact that there are always people at the center of these concepts. Digital leaders, who occupy very important positions in the digital information era, are leaders who have a global perspective, have digital literacy, can work together with various age groups and cultures, are participatory and open to innovation. In this sense, this thesis aims to explore the impact of digital leaders with digital competence in workflow processes by emphasizing the critical importance of digital transformation for businesses. Within the scope of the thesis, 51 participants working in the different technology-based businesses were interviewed in Mersin province. In the thesis, which has a mixed research design, qualitative and quantitative data were collected simultaneously from both online platform and face-to-face. The obtained data were analyzed with SPSS 22.0. As a result of the analysis, it has been seen that businesses in Mersin are aware of digital transformation, digital leaders have created a digital organizational culture in this process, and the digital generation with digital competence has been tried to be integrate into the businesses
Combustion characteristics of trimethyl borate, diesel, and trimethyl borate-diesel blend droplets
In this study, droplet tests were carried out for pure and blended forms of diesel fuel, which is the traditional fuel, and trimethyl borate fuel, which is new generation fuels. In this context, the evolution of fuel droplet diameter, flame structure, and flame temperature over time was observed using a high-speed camera and a thermal camera simultaneously. Measurements were made for the addition of 20%, 40%, 60%, and 80% trimethyl borate fuel to diesel fuel in fuel blends. The curves of the time-dependent change of the dimensionless square of the droplet diameter (D/D0)2 of the fuel droplets considered in the study, in general, have been determined to comply with the D2-law. Also, as the amount of diesel rose, there were high changes in droplet distortion and high deviations from the hemispherical geometry, and also elongation in the dominant shape droplet shape changed times. While the highest flame temperature was monitored by the thermal camera in the flame formed by the trimethyl borate droplet, as the amount of diesel fuel in the mixture increased, the maximum flame temperature decreased, but the burning time of the droplet was prolonged. On the other hand, the shortest ignition delay was measured for trimethyl borate, while the longest ignition delay time was detected for diesel fuel droplet. In general, it has been observed that the addition of trimethyl borate reduces the ignition delay, shortens the extinction time, and increases the temperature during combustion compared to diesel.Q1WOS:0008705306000022-s2.0-8513937372
Preparation of composite structures containing graphitic carbon nitride and hexagonal boron nitride; environmental and energy applications
Yarı iletken nanokompozit malzemeler son yıllarda çevresel iyileĢtirme ve enerji
uygulamaları için yoğun ilgi görmektedir. Bu tez çalıĢması kapsamında nanamalzeme
katkılı membranlar ve süperkapasitörler üretilmiĢtir. Yüksek termal stabilitesi ve iyi
dağılabilirlik, kimyasal kararlılık, elektriksel yalıtım özellikleri ve toksik olmamaları
sebebiyle grafitik karbon nitrür (g-C3N4) ve bor nitrür kuantum noktalar (BNKN) bu
uygulamalarda nanokompozit malzemelerin esas bileĢenleri olarak kullanılmıĢtır.
g-C3N4 ve BNKN üretimi sırasıyla sinterleme ve hidrotermal iĢlem ile
gerçekleĢtirilmiĢtir. Nanomalzemelerin çevresel uygulamalarında, ağırlıkça % 0.5, %
1.0 ve % 2.0 g-C3N4 veya BNKN içeren polietersülfon (PES) membranlar (gC3N4@PES, BNKN@PES) bir döküm ünitesinde üretilmiĢtir. Membranların saf su akı
geçirgenlik performansı ile birlikte membran tıkanıklığını önleme ve kirlilik çalıĢmaları
da araĢtırılmıĢtır. Hibrit membranların, saf PES membrandan daha iyi temizleme
özelliği sergilediği görülmüĢtür.
Enerji uygulamalarında kullanılmak üzere, g-C3N4 veya BNKN içeren grafen
elektrotlar hazırlanmıĢtır. Bu kapsamda, farklı miktarlarda alınan g-C3N4 veya BNKN
(15 mg / 30 mg / 60 mg), indirgenmiĢ grafen oksit (rGO) (30 mg) ile hidrotermal iĢleme
tabii tutularak, süperkapasitör uygulamalarında kullanılabilecek elektrotlar (gC3N4@rGOH ve BNKN@rGOH) hazırlanmıĢ ve uygun tekniklerle (XRD, SEM, CV,
BET, ZETA) karakterize edilmiĢtir. Bu hibrit yapılardan üretilen elektrotların spesifik
kapasitans değerleri, empedans eğrileri ve Ģarj/deĢarj performansları elektrokimyasal
teknikler ile analiz edilmiĢtir. g-C3N4@rGOH (30 mg/15 mg oranlarında) hazırlanan
elektrotun 157.4 F g
-1
spesifik kapasitans değeri ile en yüksek performansa sahip olduğu
bulunmuĢtur. EĢit oranlarda hazırlanan BNKN@rGOH (30 mg/30 mg oranlarında)
ii
hibrit yapısından ise 207.25 F g-1
spesifik kapasitans değeri ile en yüksek performansa
sahip olduğu bulunmuĢtur. Bu tez çalıĢmasından elde edilen sonuçlara göre; üretilen
hibrit yapıların, çevre ve enerji uygulamalarında gelecek vaad ettiği görülmektedir.Semiconductor nanocomposite materials have attracted intense interest for
environmental remediation and energy applications in recent years. In this thesis,
nanomaterial doped membranes and supercapacitors were produced. Graphitic carbon
nitride (g-C3N4) and boron nitride quantum dots (BNKN) have been used as the main
components of nanocomposite materials in these applications due to their high thermal
stability and good dispersibility, chemical stability, electrical insulating properties and
non-toxicity.
The production of g-C3N4 and BNKN was carried out by heating process and
hydrothermal treatment, respectively. In environmental applications of nanomaterials,
polyethersulfone (PES) membranes (g-C3N4 @PES, BNKN@PES) containing 0.5 %,
1.0 % and 2.0 % by weight g-C3N4 or BNKN were produced in a casting unit. Along
with the pure water flux permeability performance of the membranes, membrane
fouling prevention and pollution studies were also investigated. It has been observed
that hybrid membranes to display better cleaning properties than pure PES membranes.
Graphene-based electrodes containing g-C3N4 or BNKN have been prepared for
use in energy applications. In this context, electrodes (g-C3N4@rGOH ve
BNKN@rGOH) that can be used in supercapacitor applications were prepared by
hydrothermal treatment with reduced graphene oxide (rGO) (30 mg) of g-C3N4 or
BNKN (15 mg / 30 mg / 60 mg), taken in different amounts, and with appropriate
techniques (XRD, SEM, CV. BET, ZETA) were characterized. The specific capacitance
values, impedance curves and charge/discharge performances of the electrodes
produced from these hybrid structures were analyzed by electrochemical techniques. It
was found that the electrode prepared g-C3N4@rGOH (at the ratio of 30 mg/15 mg) had
iv
the highest performance with a specific capacitance value of 157.4 F g-1. It was found
that the hybrid structure of BNKN@rGOH (at the ratio of 30 mg/30 mg), prepared in
equal proportions, had the highest performance with a specific capacitance value of
207.25 F g-1
. According to the results obtained from this thesis study; It is seen that the
hybrid structures produced are promising in environmental and energy applications
Investigation of the effects of boron derivative integrationto fuel on combustion characteristics in different combustion systems
Bu yüksek lisans tez çalışması kapsamında ülkemiz adına stratejik öneme sahip bor
katkılı yakıtların yanma karakteristikleri ve yanma sonu açığa çıkan emisyon oluşum
davranışları farklı tipte yakıcılarda deneysel olarak araştırılmıştır. Meker-Fisher bekinde ön
karışımlı yanma ve difüzyon yanma olarak iki farklı durumda deneyler yapılmıştır. Saf
yakıtlar olarak LPG (Sıvılaştırılmış Petrol Gazı), benzin ve trietil borat (TEB) yakıtları
kullanılmıştır. Benzin yakıtına TEB ilavesi yapılarak LPG ile Meker-Fisher beki test
düzeneğinde yanma karakteristikleri tespit edilmeye çalışılmıştır. Deneysel çalışmada bor
türevi olan TEB üç farklı yakıcı sistemde ve farklı karışım oranlarında incelenmiştir.
Damlacık yanma deneysel test sonuçlarında %0 yakıt damlacığı sarıdan kırmızıya
doğru spektral değişim, %100 TEB yakıt damlacığı yeşil ve sarı ışımalı alev oluşumu
sergilemiştir. %100 TEB yakıtının %0 TEB yakıtına göre damlacık çapının zamana bağlı
değişimi daha kısa sürede, alev üstü sıcaklığı daha yüksek, yanma süresi daha kısa sürede
ve tutuşma gecikmesi daha kısa sürede gerçekleştiği gözlenmiştir. Kanal yanma deneysel
test sonuçlarında %100 TEB yakıtı yüksek alev üstü sıcaklıkta, daha kısa sürede ve daha
hızlı bir şekilde yanma eğilimi göstermiştir.
Meker-Fisher bekinde deneysel test sonuçlarında ön karışımlı alevlerde %15 ve %20
TEB yakıtında maksimum alev üstü sıcaklıklar gözlemlenmiştir. Ön karışımlı alevlerde
bütün debi şartlarında %10 TEB yakıtı %0 TEB yakıtına göre ani alev üstü sıcaklık artışı
sergilemiştir. Difüzyon alevlerde ve ön karışımlı alevlerde 1.5 lt/dk debiden 7.5 lt/dk debiye
doğru ilerledikçe alev kopmaları, alev salınımı ve mikro patlamalarda artışlar görülmüştür.
Emisyon oluşum davranışında TEB katkısı arttıkça CO ve H2 emisyonlarında düşüş gözlemlenmiştir. Ön karışımlı alevlerde yapılan deneylerde LPG’nin debi miktarı arttıkça
alev koni açısı azalmış ve TEB katkısının artması ile alev boyu artış göstermiştir. Difüzyon
alevlerinde TEB katkısı ve debi miktarının artması sonucu alev yayılımı artmıştır.
Trietil borat (TEB)’ın katkılı ya da ana yakıt olarak alternatif yakıtlarda kullanımını
yakma sistemlerinde kullanımının uygun olduğunu deneylerden elde edilen sonuçlar
göstermiştir
Spherical and core–shell-structured LiMn1.5Ni0.5O4 lithium-ion battery cathode with enhanced cyclability
oai:acikerisim.tarsus.edu.tr:20.500.13099/132Spherical LiMn1.5Ni0.5O4(LMN) spinel materials with Co or Al doping were synthesized using coprecipitation technique and the dopants’ impacts on cathode performance were explored. While both dopants were conducive to the capacity retention of LMN spinel, aluminum was more efective. Cobalt doping also helped increase the discharge capacity of control spinel, unlike aluminum. Core–shell-structured materials with Co-doped core and Al-doped shell segments were synthesized
with the aim to create synergy between two dopants. Indeed, the best cathode performance in terms of lithium capacity and cyclability was reached with core–shell material. The best cathode material denoted as CS 3-1 had a frst cycle lithium capacity of 133.1 mAh g−1 and exhibited capacity fade rate of 0.08% per cycle. X-ray difraction and FTIR studies revealed that all cathode materials were single phase and spinel type with Fd3m space group. Focused-ion beam (FIB) and Scanning Electron Microscope photos showed that spinel materials were made of distinct spherical particles 3–4 µm in diameter. The
core–shell structure was also substantiated with the photos. Energy dispersive analysis confrmed that constituent elements Mn, Ni, Co and Al had a homogeneous distribution within spherical particles. Electrochemical impedance spectroscopy results showed that Al doping on the surface was benefcial to reducing impedance growth, thereby explaining the better cyclability and rate performance of these cathodes.Q3WOS: 00073930820000
Factors affecting households' saving preferences in Turkey
Hanehalkı tasarrufları gelişmekte olan ülkelerdeki (GOÜ) yatırımların finansmanı kapsamında önemli bir kaynak teşkil etmektedir. Hanehalkı tasarrufları daha yüksek ekonomik büyümede itici bir güce sahiptir. GOÜ'ler yerel yatırım gereksinimlerini finanse edebilmek amacıyla çoğunlukla sermaye ya da uluslararası bir borçluluk şeklinde yabancı tasarruflara bağımlı haldedir. Bu çalışmanın temel amacı, ülkemiz gibi GOÜ'ler için ekonomik ilerlemede önemli bir unsur olan hanehalkı tasarrufunu etkileyen faktörleri belirlemek ve elde edilen bulgularla ilgili karar vericilere politika önerileri sunmak ve eylemlerini belirlemeleri yönünden yol gösterici olmaktır. Çalışmada demografik ve ekonomik faktörlerin tasarrufa etkisini belirleyebilmek amacıyla lojistik regresyon analizi yapılmıştır. Tez çalışmasında Türkiye İstatistik Kurumu Hanehalkı Bütçe Araştırmasının 2019 yılı verileri kullanılmıştır. Analiz sonucunda hanehalkı tasarruflarına etki eden faktörler içerisinde en önemli demografik değişkenlerin yaş, cinsiyet ve eğitim düzeyi olduğu; ekonomik değişkenler içerisinde ise yıllık kullanılabilir gelir, mülk ve araç sahipliği olduğu tespit edilmiştir. Bulguların literatürdeki diğer çalışmalardan farkı ise hanehalkı reislerinin tasarruf tercihleri ile ilgili davranış biçimleri hakkında karar vericilere politika ve faaliyetlerini belirlemeleri açısından yol gösterici fikirler sunulmuştur.Household savings constitute an important source of financing investments in
developing countries (EMs). Household savings are a driver of higher economic
growth. EMs are mostly dependent on foreign savings in the form of capital or an
international indebtedness to finance their local investment needs. The main purpose
of this study is to determine the factors affecting household savings, which is an
important factor in economic progress for developing countries like our country, and
to provide policy recommendations to decision makers regarding the findings and to
guide them in determining their actions. In the study, logistic regression analysis was
performed in order to determine the effect of demographic and economic factors on
savings. In the thesis study, 2019 data of the Household Budget Survey of the Turkish
Statistical Institute were used. As a result of the analysis, the most important
demographic variables among the factors affecting household savings are age, gender
and education level; Among the economic variables, it has been determined that there
is annual disposable income, property and vehicle ownership. The difference of the
findings from other studies in the literature is that guiding ideas are presented to the
decision makers about the behavior of household heads regarding their savings
preferences in terms of determining their policies and activities
Comparative elektronic democracy: The case of Spain and Switzerland
Bilgi ve İletişim Teknolojisi; sosyal alandan, eğitim sektörüne; ekonomik alandan, siyasal
alana kadar hayatımızın her alanında yardımcı araç olarak yaşamımızı biçimlendirmiştir ve
biçimlendirmeye devam etmektedir. Özellikle insanlar arası mesafeyi ortadan kaldıran BİT,
sunduğu teknoloji ile demokrasi için de yeni bir dönem başlatmaktadır. Demokrasinin
imkânsızlığına karşı BİT, günümüzde tam anlamı ile demokrasinin var olabileceğini çeşitli
araçlar ile insanlığa göstermektedir. Bugün BİT kullanılarak gerçekleştirilen siyasal katılıma
e-demokrasi denmektedir. 1848 yılından beri doğrudan demokrasi yönetim biçimi ile
yönetilen İsviçre ve henüz yeni olmasına karşın 1977 yılında demokratik yönetim biçimine
hızla adapte olmuş İspanya da belirgin e-demokrasi araçlarını kullanmaktadır. Bu
araştırmanın amacı da iki farklı demokrasi tarihine sahip İsviçre ve İspanya ülke örneklerini
vererek, e-demokrasinin uygulanabilirliğini sorgulamaktır. İkincil verilerden (siyasi
akademik yazın, ilgili endeksler, haber kaynakları, strateji planları) yararlanılarak sunulan
çalışmada, BİT’nin ‘internet güvenliği’ sorunu dışında demokrasiye iyi yönde hizmet ettiği
gözlemlenmiştir. İsviçre örneğinde, BİT doğrudan demokrasiye hizmet ederek ülke
yönetimini kolaylaştırmıştır ve ülkede internet güvenliği dikkate alınarak çalışmalar
yürütülmektedir. Bu bağlamda İsviçre’de e-devlet, e-oylama, siyasal katılım araçları oldukça
dikkat çekmektedir. İspanya örneğinde; ‘Pegasus Casus Yazılım’ skandalı ile internet
güvenliği sarsılmış olsa da; ülkede e-demokrasi araçlarından, e-devlet, e-siyasi parti ve
yerelde ‘decide.madrid.es’ portalı e-demokrasi adına önemli girişimlerdir. Bu çalışmanın
sonucunda BİT’nin kullanım amacına göre şekillenebilen muazzam bir araç olduğu tespit
edilmiştir.ICT has shaped and continues to shape every area of our lives with helpful tools, from the
social domain to educational sector, and from economy to politics. Specifically, ICT and the
technology it offers is starting a new era for democracy as it eliminates the distance between
people. Through a variety of tools, ICT, against the impossibility of democracy, is showing
humanity the true meaning of what all that democracy could be. Today, the political
participation achieved using ICT is called e-democracy. Switzerland, governed by
democratic administration since 1848, and Spain, which despite being new, quickly adapted
to a democratic government in 1977, both use specific e-democracy tools. The purpose of
this research is to examine the applicability of e-democracy using the examples of
Switzerland and Spain who have two different democratic histories. In this proposed
research, drawing off secondary sources (political academic literature, related indexes, news
sources, strategy plans), it was observed that besides ICT’s “internet security” problem, ICT
serves democracy well. In the example of Switzerland, ICT made governing the country
easier through serving democracy directly, and work is being carried out by taking the
country’s internet security into consideration. In this context, the e-government, e-voting and
political attendance in Switzerland are drawing a considerable amount of attention. In the
example of Spain, even though internet security was shaken with the “Pegasus Spy
Software” scandal, the country’s e-democracy tools of e-government, e-political party and
the local “decide.madrid.es” portal are important beginnings in the name of e-democracy.
As a result of this research, it has been determined that ICT is an enormous tool that can be
shaped according to its purpose
A novel genetic search scheme based on nature-inspired evolutionary algorithms for binary self-dual codes
In this paper, a genetic algorithm, one of the evolutionary algorithm optimization methods, is used for the first time for the problem of computing extremal binary self-dual codes. We present a comparison of the computational times between the genetic algorithm and a linear search for different size search spaces and show that the genetic algorithm is capable of computing binary self-dual codes significantly faster than the linear search. Moreover, by employing a known matrix construction together with the genetic algorithm, we are able to obtain new binary self-dual codes of lengths 68 and 72 in a significantly short time. In particular, we obtain 11 new binary self-dual codes of length 68 and 17 new binary self-dual codes of length 72.Q30007930320000012-s2.0-8519685091
The role of tradesmen and craftsmen in Mersin urban economics: An analysis of institutional, sectoral-based and location of activity
Urbanization is not only a concentration of humans in city areas but also, the consumption and production activities that are comprised in urban space. In this sense, goods and services are developed through the urban economic actors, through labor, economic diversity, and prosperity. This article reviews the relationship between urban economics and tradesmen & craftsmen (TC). The focus is on analysing tradesmen and craftsmen’s institutional, sectoral-based, and activity location. To do that, the research has adopted the qualitative research method strategy and an instrumental and multiple case study design. The study used the document analysis technique to collect data. It aims to illustrate how urban economics actors conduct their businesses across the city. To clarify that, this article benefits from the urban economics notion which explains the relation between urban economics structure and actors. This paper also argues that tradesmen and craftsmen are key actors who produce goods and services in urban economics and it is composed of three main parts, the first of which analyses urban economics notion within the historical background briefly. The structure of Mersin's urban economics is assessed in the second part of this article. Within the scope of the paper, first of all, tradesmen and craftsmen were analysed in terms of the institutional framework, sectoral based, and location-activity. What is evident from
this research is that tradesmen and craftsmen both are supported by the state and TC has an
institutional organization capacity that is spread whole over the national level. Also, TC provides
the city’s production process of goods and services based on sector