International Journal of Reconfigurable and Embedded Systems (IJRES)
Not a member yet
454 research outputs found
Sort by
Continuous hand gesture segmentation and acknowledgement of hand gesture path for innovative effort interfaces
Get PDFHuman-computer interaction (HCI) has revolutionized the way we interact with computers, making it more intuitive and user-friendly. It is a dynamic field that has found it is applications in various industries, including multimedia and gaming, where hand gestures are at the forefront. The advent of ubiquitous computing has further heightened the interest in using hand gestures as input. However, recognizing continuous hand gestures presents a set of challenges, primarily stemming from the variable duration of gestures and the lack of clear starting and ending points. Our main objective is to propose a solution: the framework for “continuous palm motion analysis and retrieval” based on “Spatial-temporal and path knowledge”. Framework harnesses the power of cognitive deep learning networks (DLN), offering a significant advancement in the continuous hand gesture recognition domain. we conducted rigorous experiments using a diverse video dataset capturing hand gestures for boasting an impressive F-score of up to 0.99. The potential of our framework to significantly enhance the accuracy and reliability of hand gesture recognition in real-world applications
C4O: chain-based cooperative clustering using coati optimization algorithm in WSN
Get PDFIn order to provide sensing services to low-powered IoT devices, wireless sensor networks (WSNs) organize specialized transducers into networks. Energy usage is one of the most important design concerns in WSN because it is very hard to replace or recharge the batteries in sensor nodes. For an energy-constrained network, the clustering technique is crucial in preserving battery life. By strategically selecting a cluster head (CH), a network's load can be balanced, resulting in decreased energy usage and extended system life. Although clustering has been predominantly used in the literature, the concept of chain-based clustering has not yet been explored. As a result, in this paper, we employ a chain-based clustering architecture for data dissemination in the network. Furthermore, for CH selection, we employ the coati optimisation algorithm, which was recently proposed and has demonstrated significant improvement over other optimization algorithms. In this method, the parameters considered for selecting the CH are energy, node density, distance, and the network’s average energy. The simulation results show tremendous improvement over the competitive cluster-based routing algorithms in the context of network lifetime, stability period (first node dead), transmission rate, and the network's power reserves
Remote surveillance of enclosed and open architectures using unmanned vehicle with advanced security
Get PDFMonitoring behavior, numerous actions, or any such information is considered as surveillance and is done for information gathering, influencing, managing, or directing purposes. Citizens employ surveillance to safeguard their communities. Governments do this for the purposes of intelligence collection, including espionage, crime prevention, the defense of a method, a person, a group, or an item; or the investigation of criminal activity. Using an internet of things (IoT) rover, the area will be secured with better secrecy and efficiency instead of humans, will provide an additional safety step. In this paper, there is a discussion about an IoT rover for remote surveillance based around a Raspberry Pi microprocessor which will be able to monitor a closed/open space. This rover will allow safer survey operations and would help to reduce the risks involved with it
Arowana cultivation water quality monitoring and prediction using autoregressive integrated moving average
Get PDFDecorative fish is a fish that humans keep for amusement. There are many decorative fish that exist in this world, one of them is known as the Arowana fish (Scleropages Formosus). This fish is known around Asia including in Indonesia. However, to ensure the Arowana is living well is not easy. The water quality inside a farm must follow a strict balance. The pH of the water must not exceed or below 7 pH. Meanwhile, the total dissolved solid (TDS) salt must not exceed 1000 parts per million. If the balance collapsed, the Arowana fish will not grow. Thus, the owner must monitor the water to make sure that the water is ideal. There were many approaches including internet of things (IoT) solutions. However, they have weaknesses with prediction. Because of this reason, this study designed pH and TDS monitoring with autoregressive integrated moving average (ARIMA) as the algorithm. To achieve the solution, this study used experiment methodology as the research fundamental from top to bottom. According to the evaluation, this study found that the accuracy of ARIMA model is 98.12% for pH and 98.86% for TDS. On the contrary, the seasonal autoregressive integrated moving average (SARIMA) model has an accuracy of 98.52% for pH and 99.89% for TDS
Performance analysis of microstrip patch antenna for wireless communication systems
Get PDFAn antenna may be thought of as a temporary tool that directs radio waves for transmission or reception. Aside from being inexpensive, small, easy to manufacture, and compatible with integrated electronics, the microstrip patch antenna (MPA) offers several other benefits as well. These two methods are often seen as low-cost, adaptable, dependable, high-speed data connection choices that promote user mobility. An overview of how MPA have been used throughout the last several decades is provided in this article. It has been suggested that there are many approaches to enhance the performance of MPA, including the use of composite antennas, highly integrated antenna/array and feeding networks, operating at relatively high frequencies, and using cutting-edge manufacturing methods. Dual or multiband antennas are essential for meeting the demands of wireless services in this rapidly evolving wireless communication environment. Here is an overview of the patch antenna literature for wireless local area network (WLAN) and worldwide interoperability for microwave access (WiMAX) applications
Frequency reconfigurable microstrip patch antenna for multiband applications
Get PDFWireless communication technology is well-established, and several antennas have been developed and produced specifically for this purpose. However, antenna performance and communication system development need to be enhanced in order to adapt to the present era. The performance of the antenna is significantly influenced by its design. Thus, this work produced a novel wideband antenna design via the use of a frequency reconfigurable approach. In the recommended study, microstrip patch antennas (MPAs) were used in wideband applications to switch frequencies using shunt-series microelectromechanical systems (MEMS). The suggested antenna, which has two switches built into it, is tested in ON-ON, OFF-ON, and OFF-OFF switching scenarios. Radiation pattern, voltage standing wave ratio (VSWR), gain, bandwidth, and return loss are among the antenna performance metrics used to assess the suggested antenna's performance in each switching situation. The simulation findings suggest that the optimal antenna design for usage in wireless communication systems is one that works well with a shunt-series MEMS switch
An exhaustive review of the stream ciphers and their performance analysis
Get PDFThe number of internet of things (IoT) applications has increased, which has increased the demand for low-resource gadgets. The data produced by these devices must be protected to guarantee security. The devices operate in conditions with limited space, computational power, memory, and energy. High-security standards are difficult to achieve with limited resources. The detailed analysis of various stream ciphers and their performance metrics is reviewed in this manuscript. The functionality of the stream ciphers is categorized and thoroughly discussed based on both the hardware and software viewpoints. The security attacks and their countermeasure methods using stream ciphers are discussed. The performance metrics of most hardware-based stream ciphers, including the ECRYPT stream cipher project (eSTREAM) ciphers, are discussed. Each hardware stream cipher design highlights the hardware constraints such as chip area, frequency, throughput, and hardware efficiency. The work also highlights the various applications using these stream ciphers. The current trends using these stream ciphers are discussed with futuristic goals
Guidance device for visually impaired people based on ultrasonic signals and open hardware
Get PDFVisual impairment is a complex challenge that affects people of all ages, and it is estimated that around 2.2 billion people worldwide lack adequate access to medical treatment and support. In Latin America, there is a lack of attention to people with visual disabilities, evidenced by poor urban infrastructure and lack of compliance with inclusion laws. Some projects stand out for the use of prototypes with artificial vision technology, global positioning system (GPS) and smart canes. Therefore, the objective of the project is to use ultrasonic sensors and a low-cost electronic device coupled to canes, for obstacle detection and mobility using an open hardware embedded system. The results confirmed the efficiency in the detection and operation of the ultrasonic sensor by activating the light emitting diode (LED), the buzzer and the vibrating motor according to the programmed distances. Challenges were identified, such as adapting the sensor to the tilt of the cane and the importance of accurate calibration of the ultrasonic sensor. The system met its objectives by detecting objects in a range of 2 to 50 cm and providing sound alerts to improve the perception of blind people
Efficient very large-scale integration architecture design of proportionate-type least mean square adaptive filters
Get PDFThe effectiveness of adaptive filters are mainly dependent on the design techniques and the algorithm of adaptation. The most common adaptation technique used is least mean square (LMS) due its computational simplicity. The application depends on the adaptive filter configuration used and are well known for system identification and real time applications. In this work, a modified delayed μ-law proportionate normalized least mean square (DMPNLMS) algorithm has been proposed. It is the improvised version of the µ-law proportionate normalized least mean square (MPNLMS) algorithm. The algorithm is realized using Ladner-Fischer type of parallel prefix logarithmic adder to reduce the silicon area. The simulation and implementation of very large-scale integration (VLSI) architecture are done using MATLAB, Vivado suite and complementary metal–oxide– semiconductor (CMOS) 90 nm technology node using Cadence register transfer level (RTL) Genus Compiler respectively. The DMPNLMS method exhibits a reduction in mean square error, a higher rate of convergence, and more stability. The synthesis results demonstrate that it is area and delay effective, making it practical for applications where a faster operating speed is required
AnoMalNet: outlier detection based malaria cell image classification method leveraging deep autoencoder
Get PDFClass imbalance is a pervasive issue in the field of disease classification from medical images. It is necessary to balance out the class distribution while training a model. However, in the case of rare medical diseases, images from affected patients are much harder to come by compared to images from non-affected patients, resulting in unwanted class imbalance. Various processes of tackling class imbalance issues have been explored so far, each having its fair share of drawbacks. In this research, we propose an outlier detection based image classification technique which can handle even the most extreme case of class imbalance. We have utilized a dataset of malaria parasitized and uninfected cells. An autoencoder model titled AnoMalNet is trained with only the uninfected cell images at the beginning and then used to classify both the affected and non-affected cell images by thresholding a loss value. We have achieved an accuracy, precision, recall, and F1 score of 98.49%, 97.07%, 100%, and 98.52% respectively, performing better than large deep learning models and other published works. As our proposed approach can provide competitive results without needing the disease-positive samples during training, it should prove to be useful in binary disease classification on imbalanced datasets