E-Journal Universitas Al-Azhar
Not a member yet
336 research outputs found
Sort by
Tipologi tindak pidana Perbankan dalam perspektif Undang-Undang Nomor 10 Tahun 1998 tentang Perbankan
No full textbank is an intermedial institution, namely a business entity that collects funds from the public in the form of savings and distributes them to the public in the form of credit and/or other forms in order to improve the standard of living of many people. The aim of collecting public funds and channeling them in the form of credit and other forms is to improve welfare, which is also part of the state's goals.Activities that can cause harm and threaten the failure to achieve banking objectives may be subject to criminal charges. Regulations regarding banking crimes are regulated in Law number 10 of 1998 concerning amendments to Law Number 7 of 1992 concerning banking. Several articles regarding acts that can be punished are regulated in this law.In order to make it easier to understand the actions that can be punished in the banking sector, this can be done by identifying the types of banking crimes. This article outlines the typology of banking criminal acts based on laws and regulations in Indonesia
PENGARUH FASILITAS KERJA, PELATIHAN DAN LOYALITAS TERHADAP PRODUKTIVITAS KERJA GURU SMP AL-AZHAR MEDAN
No full textThe purpose of this study is to determine the Effect of Work Facilities, Training and loyalty on the Work Productivity of Al-Azhar Medan Junior High School Teachers. The research sample consisted of 57 teachers of Al-Azhar Medan Junior High School, and the data used was raw data. This study analyzes the effect of work facilities, training, and loyalty on teacher productivity using multiple linear regression statistical methods (multiple regression analysis) and qualitative methods using instrumental data testing, classical hypothesis testing, and hypothesis testing. The results showed that work facilities (X1), training (X2), and loyalty (X3) partially had a positive and significant effect on teacher work productivity (Y). The work facility (X1) has a calculated t value of 9.832 and a significance level value of 0.000. Training (X2) has a calculated t value of 6.077 and a significance level value of 0.000. Loyalty (X3) has a calculated t value of 4.449 and a significance level value of 0.018. Simultaneously, work facilities (X1), training (X2), and loyalty (X3) have a positive and significant effect on the work productivity of Al-Azhar Medan Junior High School teachers with a calculated F value of 49,708 and a significance level value of 0,000. The coefficient of determination (R2) is 0.959 (95.9%)
Analysis of potential hazards and risks of container loading and unloading activities on work at PT. Pelindo Multi Terminal
No full textHIRARC is a hazard identification, risk assessment, and risk control process, which identifies potential hazards in ordinary and unusual business activities, including an assessment of potential hazards and strategies to mitigate risks. Work accidents can occur due to actions, human conditions, and mechanical factors. The research method is data analysis in the work process and container filling, then risk control of each process. The data in the hazard and risk assessment is a qualitative analysis in AS/NZS 4360:2004. 53 sources of danger were identified from 12 stages of work. The results of the risk evaluation showed a low-risk level of 32% with 18 sources of danger, a moderate risk level of 28% with 16 sources of danger, a high-risk level of 16% with 9 sources of danger, and an extreme risk level of 24% with 14 sources of danger. This study concludes that in the dismantling process there are four stages of work, namely starting from the opening of the hatch (3 sources of danger), stevedoring (20 sources of danger), cargodoring (4 sources of danger), and delivery (2 sources of danger). In the loading process, there are four stages of work, starting from receiving (6 sources of danger), cargodoring (4 sources of danger)
The present study proposes a novel integration of logic tree analysis (LTA) and fuzzy failure mode and effect analysis (Fuzzy-FMEA) in the domain of production machine maintenance planning
No full textThe reliability and efficiency of machinery in a production system are contingent upon proper failure analysis. The objective of this study is to identify and evaluate the primary failure modes in machine components using the Failure Mode and Effect Analysis (FMEA) method and Risk Priority Number (RPN) calculation. The analysis results indicate that Belt Conveyors and Bearings have the highest RPN value (180), signifying a substantial risk of failure relative to other components. The study identified severity, occurrence, and detection as the primary factors contributing to failure. Additionally, the analysis categorized components based on risk level, with category B (outage) exhibiting a 100% proportion, signifying that all failures have a direct impact on system operations. The findings of this study provide a foundation for the development of a more effective maintenance strategy, aimed at minimizing the likelihood of failure and enhancing the performance of the production system
Comparative analysis of cast in situ slab method with half slab precast in terms of time and cost on The Kasih Ibu Surakarta Hospital construction project
No full textThe development of methods / systems in the field of construction every year is increasing, so that in planning a construction building can choose the most economical, effective, and efficient method to be applied. One of them is the casting implementation method which can be done by conventional method (cast in situ) and precast method (precast). In this study, the object reviewed is the Kasih Ibu Surakarta Hospital Construction Project, where the method of carrying out floor slab casting work uses the cast in situ method which will later be carried out a comparative analysis between the cast in situ method and the half slab precast method in terms of time and cost. This study uses data in the form of shop drawing, RAB, AHSP, and data on the number of workers to be the basis for analysis between the two methods. The results of the comparative analysis of the cast in situ method and the half slab precast method in terms of time and cost obtained results for the cast in situ method plate takes 129.26 days at a cost of IDR 11,200,040,000 while for the half slab precast method plate takes 108.89 days for IDR 2,375,860,00
PENGARUH STRUKTUR AKTIVA, PERTUMBUHAN PENJUALAN DAN PROFITABILITAS TERHADAP STRUKTUR MODAL PADA PERUSAHAAN PROPERTY AND REAL ESTATE YANG TERDAFTAR DI BURSA EFEK INDONESIA PADA TAHUN 2019-2021
No full textPenelitian ini bertujuan untuk menganalisis dampak Struktur Aktiva, Pertumbuhan Penjualan, dan Profitabilitas terhadap Struktur Modal pada perusahaan-perusahaan Properti dan Real Estate yang terdaftar di Bursa Efek Indonesia (BEI) selama periode 2019-2021. Penelitian ini melibatkan 83 perusahaan sebagai populasi, dengan 16 perusahaan sebagai sampel. Data diolah menggunakan perangkat lunak SPSS 16 dan dianalisis menggunakan teknik regresi linier berganda, uji koefisien determinasi (R2), uji parsial (uji t), serta uji simultan (uji f). Pengujian hipotesis dilakukan melalui analisis regresi linier berganda dengan uji F dan uji t. Hasil analisis menunjukkan bahwa secara parsial, Struktur Aktiva memiliki pengaruh signifikan terhadap Struktur Modal pada perusahaan Properti dan Real Estate yang terdaftar di BEI selama periode 2019-2021. Namun, Pertumbuhan Penjualan dan Profitabilitas tidak memiliki pengaruh terhadap Struktur Modal. Secara simultan, diketahui bahwa Struktur Aktiva, Pertumbuhan Penjualan, dan Profitabilitas secara bersama-sama memiliki pengaruh signifikan terhadap Struktur Modal pada perusahaan Properti dan Real Estate yang terdaftar di BEI selama periode tersebut
ANALISIS PENGARUH BIAYA OPERASIONAL PENDAPATAN OPERASIONAL, NET PROFIT MARGIN DAN DEBT TO EQUITY RATIO TERHADAP RETURN ON ASSETS PADA PERUSAHAAN PERTAMBANGAN YANG TERDAFTAR DI BURSA EFEk INDONESIA TAHUN 2019-2021
No full textTujuan penelitian ini ialah teruntuk memahami Pengaruh Biaya Operasional Pendapatan Operasional, Net Profit Margin serta Debt to Equity Ratio terhadap Return on Assets yang terdaftar di Bursa Efek Indonesia Tahun 2019-2021 Populasi dalam penelitian berjumlah 49 perusahaan, dan sampelnya adalah 10 perusahaan, mengolah data memakai perangkat lunak spss 25, sedangkan teknik analisis data yang dipakai ialah regresi linier berganda, uji koefisien determinasi (R2), uji parsial (uji t), uji simultan (uji f). Uji hipotesis memakai analisis regresi linier berganda melewati uji F serta uji t bermaksud teruntuk memahami pengaruh variabel independen pada variabel dependen di tingkat kepercayaan 95% (? = 0,5
Pertumbuhan Dan Produksi Pakcoy (Brassica Rapa L. ) Akibat Pemberian Kompos Dan Pupuk Organik Cair Kulit Nenas
No full textPenelitian ini bertujuan untuk mengetahui pengaruh pemberian kompos dan pupuk organik cair kulit nanas serta interaksinya untuk meningkatkan pertumbuhan dan produksi tanamman pakcoy (brassica rapa l. ). Penelitian dilaksanakan di Jl. Setia Makmur Kelurahan Sunggal Kanan Kecamatan Sunggal Provinsi Sumatera Utara. Penelitian ini dilaksanakan pada bulan Agustus sampai Oktober 2023. Penelitian ini menggunakan Rancangan Acak Kelompok Faktorial dengan 2 faktor yang diteliti dan 3 ulangan dimana faktor pertama adalah pemberian pupuk kompos (K) yang terdiri dari 3 taraf yaitu K0 = tanpa perlakuan (kontrol), K1 = 1.5 kg plot-1, dan K2 = 3 kg plot-1. Faktor kedua pemberian pupuk organik cair kulit nanas (N) terdiri dari 4 taraf yaitu N0 = tanpa perlakuan (kontrol), N1 = 15 ml liter-1 air, N2 = 30 ml liter-1 air, dan N3 = 45 ml liter-1 air. Parameter yang diamati adalah tinggi tanaman (cm), jumlah daun (helai), berat segar tanaman per sampel (g), dan berat segar tanaman per plot (g). Hasil penelitian menunjukkan bahwa pemberian pupuk kompos berpengaruh nyata terhadap parameter tinggi tanaman, jumlah daun, dan berat segar tanaman per plot. Pemberian pupuk organik cair kulit nanas berpengaruh nyata terhadap parameter jumlah daun, dan berat segar tanaman per plot, berpegaruh tidak nyata terhadap parameter tinggi tanaman. Interaksi pemberian pemberian pupuk kompos dan pupuk organik cair kulit nanas berpengaruh tidak nyata pada semua parameter pengamatan
Pendampingan Guru-Guru SMP Muhammadiyah 48 Medan dalam peningkatan kapasitas pengelolaan keuangan sekolah
No full textPengabdian Kemitraan Masyarakat bertujuan meningkatkan kapasitas pengelolaan keuangan di SMP Muhammadiyah 48 Medan. Pengelolaan keuangan sekolah penting untuk mengklasifikasikan kebutuhan sekolah dan mempengaruhi operasional serta pendidikan. Metode yang digunakan adalah pembelajaran eksperimental dan studi kepustakaan mengenai manajemen dan penyusunan laporan keuangan, dengan penyampaian melalui ceramah dan diskusi. Guru-guru berpartisipasi aktif, terbukti dari banyaknya pertanyaan yang diajukan. Hasilnya, minat dalam penyusunan dan pengelolaan keuangan meningkat, serta kualitas pengaturan dan penyusunan laporan keuangan di sekolah juga meningka
PENGARUH UKURAN PERUSAHAAN, PROFITABILITAS, ARUS KAS OPERASI DAN CAPITAL INTENSITY TERHADAP FINANCIAL DISTRESS PADA PERUSAHAAN MANUFAKTUR YANG TERDAFTAR DI BURSA EFEK INDONESIA (BEI)TAHUN 2019-2021
No full textThis study aims to ascertain the impact of operating cash flow, Capital intensity, profitability, and company size on financial distress in manufacturing companies listed on the Indonesia Stock Exchange (BEI) between 2019 and 2021. The population used in this study consisted of 213 individuals, and 42 samples were collected over the course of three years, yielding 126 observation data points. The purposive sampling technique was followed when applying the collected samples. Logistic regression analysis is the data analysis method that is applied. Based on the research findings, it can be concluded that while operating cash flow and Capital intensity do not have an impact on financial distress, company size and profitability do. Subsequently, Financial distress is influenced concurrently by operating cash flow, Capital intensity, profitability, and company size