SICOT-J - Société Internationale de Chirurgie Orthopédique et de Traumatologie
Not a member yet
578 research outputs found
Sort by
Arthroscopic skills assessment and use of box model for training in arthroscopic surgery using Sawbones – “FAST” workstation
No full textPurpose: Arthroscopic skills training outside the operative room may decrease risks and errors by trainee surgeons. There is a need of simple objective method for evaluating proficiency and skill of arthroscopy trainees using simple bench model of arthroscopic simulator. The aim of this study is to correlate motor task performance to level of prior arthroscopic experience and establish benchmarks for training modules.
Methods: Twenty orthopaedic surgeons performed a set of tasks to assess a) arthroscopic triangulation, b) navigation, c) object handling and d) meniscus trimming using SAWBONES “FAST” arthroscopy skills workstation. Time to completion and the errors were computed. The subjects were divided into four levels; “Novice”, “Beginner”, “Intermediate” and “Advanced” based on previous arthroscopy experience, for analyses of performance.
Results: The task performance under transparent dome was not related to experience of the surgeon unlike opaque dome, highlighting the importance of hand-eye co-ordination required in arthroscopy. Median time to completion for each task improved as the level of experience increased and this was found to be statistically significant (p 85%) of subjects across all the levels reported improvement in performance with sequential tasks.
Conclusion: Use of the arthroscope requires visuo-spatial coordination which is a skill that develops with practice. This simple box model can reliably differentiate the arthroscopic skills based on experience and can be used to monitor progression of skills of trainees in institutions
Intramedullary humeral replacement: an evolving design
No full textIntroduction: Total humeral replacement is used to reconstruct the upper limb after tumour resection, while in cases of complex revisions for non-oncological reasons, using tumour prosthesis implants will lead to an otherwise avoidable further bone resection and violation of the surrounding tissues. This report describes a design evolution in three non-oncological cases, where a total humeral resection to perform a total humeral replacement is avoided and instead the simultaneous shoulder and elbow replacements were connected via custom-made intramedullary linkages.
Methods: Three cases of simultaneous shoulder and elbow replacement were performed for complex revision situations over a period of 42 months. They were performed while preserving as much humeral bone stock as possible, with the design changing from a big intramedullary connecting stem to a smaller component when performing an Intramedullary Humeral Replacement (IMHR), allowing preservation of more bone and soft tissue attachment than if a total humeral replacement were performed.
Results: None had any neurovascular complication or any further revision for the humeral replacement, or the shoulder and elbow components.
Discussion: We have showed three examples of an evolving design aiming to preserve as much of the anatomy as possible to help in decreasing the surgical impact and invasiveness of this procedure, while doing less bone resection and sacrificing less of the soft tissue attachments
Modular titanium alloy neck failure in total hip replacement: analysis of a relapse case
No full textModular neck hip prosthesis born in the 1990 with the aim of allowing the surgeon to modify CCD angle, offset and femoral anteversion intra-operatively restoring patient’s original biomechanics. In order to achieve the best biomechanics of the reconstructed hip, preoperative planning is essential. In the last few years modularity has been questioned and an argument made for the return to mono block stems due to events of breakage or disconnection of modular components. Fretting or crevice corrosion may lead to failure of such modular device due to the contamination inside the modular coupling or to high loads. We present a case of repetitive modular femoral neck prosthesis fracture
Minimal important difference after hand surgery: a prospective assessment for DASH, MHQ, and SF-12
No full textIntroduction: Minimal important difference (MID) score is an important measure for surgical clinical research and impacts on treatment decisions. Our approach considered patient satisfaction as the relevant anchor criteria. The aims of this study were: determine after surgery MID for three relevant questionnaires: Disabilities of the Arm, Shoulder and Hand (DASH), Michigan Hand Questionnaire (MHQ), and Short Form 12 (SF-12); and assess the correlation between these scores and patient reported satisfaction.
Methods: Adult patients where surgery was indicated for any hand/wrist conditions. Study was conducted in a teaching hospital, São Paulo, Brazil. Participants responded to DASH, SF-12, MHQ, and a Likert satisfaction scale before and three months after a procedure. Satisfaction was considered as the anchor for determining MID after a procedure. The correlation between satisfaction and the instruments were measured. Two statistical approaches were utilized for determining MIDs and were used for consistency and generalizability purposes. For MID determination, receiver operating curves were utilized and MID cut-offs were followed by sensitivity and specificity measures.
Results: Fifty patients were included with no follow-up losses. MID for DASH was 18.8 and 15.4. MID for MHQ was 14.7 for both approaches. Data from SF-12 was not reliable after statistical analyses and demonstrated poor correlation with patient satisfaction. MID for DASH and MHQ were found and demonstrated larger standards than literature-reported patients when surgery was not the main intervention. DASH and MHQ had moderate correlation with patient reported satisfaction. SF-12 MID was not reliable and had poor correlation to patient satisfaction. These data suggests that ambulatory hand surgery patients may have greater expectations regarding improvement than other patients
Trans trochanteric approach with coronal osteotomy of the great trochanter
No full textSeveral surgical approaches could be used in hip arthroplasty or trauma surgery: anterior, anterolateral, lateral, posterior (with or without trochanterotomy), using or not an orthopedic reduction table. Subtrochanteric and extra-capsular trochanteric fractures (ECTF) are usually treated by internal fixation with mandatory restrictions on weight bearing. Specific complications have been widely described. Mechanical failures are particularly high in unstable fractures. Hip fractures are a major public health issue with a mortality rate of 12%–23% at 1 year. An alternative option is to treat ECTF by total hip arthroplasty (THA) to prevent decubitus complications, to help rapid recovery, and to permit immediate weight bearing as well as quick rehabilitation. However, specific risks of THA have to be considered such as dislocation or cardiovascular failure. The classical approach (anterior or posterior) requires the opening of the joint and capsule, weakening hip stability and the repair of the great trochanter is sometimes hazardous. For 15 years, we have been treating unstable ECTF by THA with cementless stem, dual mobility cup (DMC), greater trochanter (GT) reattachment, and a new surgical approach preserving capsule, going through the fracture and avoiding joint dislocation. Bombaci first described a similar approach in 2008; our trans fractural digastric approach (medial gluteus and lateral vastus) is different. A coronal GT osteotomy is performed when there is no coronal fracture line. It allows easy access to the femoral neck and acetabulum. The THA is implanted without femoral internal rotation to avoid extra bone fragment displacement. With pre-operative planning, cup implantation is easy and stem positioning is adjusted referring to the top of the GT after trial reduction and preoperative planning. The longitudinal osteotomy and trochanteric fracture are repaired with wires and the digastric incision is closed. This variant of Bombaci approach could be use routinely for hemiarthroplasty or THA in the cases of unstable ECTF. It reduces complications usually linked to this procedure. Blood loss, operating time, and pain are limited, allowing fast recovery in order to decrease morbidity and mortality
Global trauma: the great divide
No full textRoad trauma is an emergent global issue. There is huge disparity between the population affected by road trauma and the resource allocation. If the current trend continues, a predicted extra 5 million lives will be lost in this decade. This article aims to create an awareness of the scale of the problem of road trauma and the inequality in the resources available to address this problem. It also describes the responses from the international organisations and the orthopaedic community in dealing with this issue. The International Orthopaedic community has a unique opportunity and moral obligation to play a part in changing this trend of global trauma
A case report of missed femoral neck stress fracture
No full textFemoral neck stress fracture (FNSF) is an uncommon but potentially serious orthopaedic problem. This is a case report on missed femoral neck stress fracture in a 62-year-old female who was initially treated as early-onset coxarthrosis. She later presented to us with a displaced intra-capsular neck of left femur fracture and underwent total hip replacement. This case illustrates that causes other than osteoarthritis should be taken into consideration in patients presenting with anterior hip pain where symptoms are disproportionate to clinical and radiological findings. More advanced investigations such as MRI scan or regular follow up with plain radiographs should be performed. A delay in diagnosis can lead to secondary displacement of the femoral neck stress fracture
Exposure of both the radius and ulna through a single posterior incision: a technical note
No full textFractures of both the radius and ulna are usually treated with two separate incisions and rarely with one single incision. However, both methods have disadvantages. For this we describe a relatively safe single straight posterior incision for exposure of the whole shafts of both the radius and ulna with the forearm rested on a board across the chest. This procedure was used in 116 forearms in 115 patients. The incision was in a straight line from the lateral humeral epicondyle to the ulnar head. The ulna was exposed between the extensor carpi ulnaris muscle and flexor digitorum profundus muscle covered by the aponeurosis of the flexor carpi ulnaris muscle and the radius between the extensor digitorum muscle and the extensor carpi radialis brevis muscle. During operation there was no difficulty in reducing or fixing any of the fractures in the whole shafts of the radius and ulna and at follow-up (average 5.2 years) there was no radioulnar synostosis or neurovascular injury in any of the forearms
Rib cartilage grafting in upper limb surgery: an overview
No full textIntroduction: Used routinely in maxillofacial reconstructive surgery, the chondrocostal graft is also used in hand surgery. The purpose of this overview was to analyze at long follow-up the radiological and histological evolution of this autograft, in the hand and wrist surgery.
Materials and methods: Since 1992, 144 patients have benefitted from a chondrocostal autograft: 116 osteoarthritis of the thumb carpometacarpal joint, 18 radioscaphoid arthritis, six articular malunions of the distal radius, four kienbock, and four traumatic loss of cartilage of the PIP joint. Magnetic Resonance Imaging (MRI) was performed in 19 patients and histological study in 12 patients with a mean follow-up of 68 months (4–159).
Results: Whatever the indication, the reconstruction by a chondrocostal or ostochondrocostal graft has allowed us to obtain satisfactory clinical results at long follow-up. The main question was the viability of the graft. The radiological study has shown the non-wear of the graft and a certain degree of ossification. The MRI confirmed a very small degree of osseous metaplasia but its viability. The biopsies showed a neo-vascularization of the cartilage.
Conclusion: Despite the strong mechanical strain in the hand and wrist, the chondrocostal graft is a biological arthroplasty, trustworthy and secure at long time even if it can cause infrequent complications inherent to this type of surgery. Despite the inevitable histological modification, the cartilage remains alive and is of satisfactory quality at long term follow-up and fulfilling the requirements for interposition and reconstruction of an articular surface
