Repositorio de la Asociación Española de Neuropsiquiatría
Not a member yet
6227 research outputs found
Sort by
Rethinking of Government Institutions and Governance Quality Indicators on Economic Growth in Sub-Saharan African Countries
The study aims to investigate the effect of governance quality on economic growth and government consumption in Sub-Saharan African countries. Balanced dynamic panel data for 36 Sub-Saharan African countries from 2011 to 2022 were analyzed using GMM and Driscoll-Kraay regressions. In addition to the fact that there is no study in the literature that examines the effect of state governance indicators on economic growth in SSA countries, the addition of government consumption variable as a second dependent variable adds originality to the study. The empirical analysis revealed that government institutions have a positive effect and are significant in SSA countries' economic growth. In addition, according to the Driscoll-Kraay regression, it is seen that governments' development of institutions increases government consumptions. The governance indicators threshold that strengthens the government institution in Sub-Sahara Africa must be reached to increase the economic growth of Sub-Sahara Africa. For economic growth, effective government institutions and governance quality policies should be practiced and maintained among the Sub-Saharan African countries
LMS-supported HyFlex clinical supervision model: Illuminating perspectives from teacher candidates in the department of English language teaching
This study presents a HyFlex Clinical Supervision Model supported by a Learning Management System (LMS). The model is designed to facilitate a seamless transition from face-to-face to remote education, particularly in unforeseen circumstances such as the COVID-19 pandemic. The primary aim is to understand the mode preferences of teacher candidates for various aspects of the teaching process, including receiving feedback on lesson plans, structuring teaching sessions, observation, being observed, and receiving feedback after teaching sessions during mentoring activities. The study included 58 fourth-year teacher candidates who were enrolled in English Language Teaching departments across six state universities in five regions in Turkey. Data was collected through an online questionnaire using Google Forms and interviews conducted via Zoom. The study uncovered diverse preferences among teacher candidates with regards to teaching sessions, observation methods, and feedback. The HyFlex clinical supervision model proposed is adaptable to both traditional and remote practicum settings. © 2024 The Autho
Modified Archimedes optimization algorithm for global optimization problems: a comparative study
Archimedes Optimization Algorithm (AOA) is a recent optimization algorithm inspired by Archimedes' Principle. In this study, a Modified Archimedes Optimization Algorithm (MDAOA) is proposed. The goal of the modification is to avoid early convergence and improve balance between exploration and exploitation. Modification is implemented by a two phase mechanism: optimizing the candidate positions of objects using the dimension learning-based (DL) strategy and recalculating predetermined five parameters used in the original AOA. DL strategy along with problem specific parameters lead to improvements in the balance between exploration and exploitation. The performance of the proposed MDAOA algorithm is tested on 13 standard benchmark functions, 29 CEC 2017 benchmark functions, optimal placement of electric vehicle charging stations (EVCSs) on the IEEE-33 distribution system, and five real-life engineering problems. In addition, results of the proposed modified algorithm are compared with modern and competitive algorithms such as Honey Badger Algorithm, Sine Cosine Algorithm, Butterfly Optimization Algorithm, Particle Swarm Optimization Butterfly Optimization Algorithm, Golden Jackal Optimization, Whale Optimization Algorithm, Ant Lion Optimizer, Salp Swarm Algorithm, and Atomic Orbital Search. Experimental results suggest that MDAOA outperforms other algorithms in the majority of the cases with consistently low standard deviation values. MDAOA returned best results in all of 13 standard benchmarks, 26 of 29 CEC 2017 benchmarks (89.65%), optimal placement of EVCSs problem and all of five real-life engineering problems. Overall success rate is 45 out of 48 problems (93.75%). Results are statistically analyzed by Friedman test with Wilcoxon rank-sum as post hoc test for pairwise comparisons.Inn niversitesi [FDK-2023-3163]; Inonu University-the Scientific Research Projects (BAP) UnitThis research is supported by Inonu University-the Scientific Research Projects (BAP) Unit (No. FDK-2023-3163). The Authors would like to thank Dr. Ahmet Kadir Arslan for comments and discussions which helped improving the quality of the paper
Salud mental y eutanasia: una realidad que hay que afrontar desde el derecho de la persona y la valoración de su sufrimiento
En primer lugar, quisiera agradecer al Comité Editorial de la Revista la posibilidad de escribir estas páginas sobre un tema controvertido, y a la vez delicado, como es el acceso de las personas con diagnóstico de trastorno mental a la prestación de ayuda a morir, que recoge la Ley 3/2021 de 24 de marzo, reguladora de la eutanasia en España (LORE) (1). Leía en un reciente editorial de vuestra Presidenta, María Fuster, cómo hacía énfasis en el compromiso ético de la AEN-PSM con los derechos humanos y la dignidad, y nada más oportuno para enmarcar la cuestión que pretendo abordar
Ética, legislación y derechos humanos
El compromiso con la sociedad es una de las señas de identidad de la AENPSM, lo que implica, entre otras cosas, unos planteamientos éticos en los que la defensa de los derechos humanos tiene una prioridad absoluta. Asimismo, e íntimamente relacionado con lo anterior, la AEN siempre ha procurado promover reformas legislativas que, con mejor o peor fortuna, han pretendido mejorar las condiciones de vida de las personas con diagnósticos psiquiátricos
A comparative analysis of labor law in turkey and Azerbaijan
Sosyal Bilimler Enstitüsü, Çalışma Ekonomisi ve Endüstri İlişkileri Ana Bilim DalıBu çalışma, işçi-işveren ilişkileri ve iş hukuku uygulamaları bağlamında Türkiye ve Azerbaycan'ın yasal çerçevelerini, mevzuatlarını ve işleyişlerini derinlemesine araştırmayı amaçlamaktadır. Bu çerçevede, 1 Temmuz 1999'da kabul edilen Azerbaycan İş Kanunu ve karşılıklı olarak 10 Haziran 2003'te kabul edilen 4857 sayılı Türk İş Kanunu, 6331 sayılı İş Sağlığı ve Güvenliği Kanunu ve 6356 sayılı Sendikalar ve Toplu İş Sözleşmesi Kanunu ele alınmış ve karşılaştırmalı olarak incelenmiştir. Her iki ülkedeki hukuksal tanımlamalar, önemli düzenlemeler, uygulama alanları ve amaçları açıklanarak, ücret, iş sözleşmeleri, iş güvenliği, işin düzenlenmesi, dinlenme, tatil ve izinler açısından ortaya çıkan farklılıklar üzerinde durulmuştur. Bu karşılaştırmalı analiz, her iki ülkenin iş hukuku uygulamalarının ekonomik, sosyal ve kültürel bağlamlarını da ele almaktadır. İş hukuku düzenlemelerinin ve uygulamalarının ekonomik büyümeye, işgücü piyasasının istikrarına ve işçi-işveren ilişkilerinin genel sağlığına olan etkilerini değerlendirmektedir. Bu çalışmanın bulguları, her iki ülkenin iş hukuku sistemlerinin işleyişine dair kapsamlı bir kavrayış sağlayarak, ayrıca iş hukuku alanındaki benzerlikler ve farklılıklar üzerinden uluslararası iş hukuku uygulamalarını daha derinlemesine anlamak ve olası iyileştirmeleri tartışmak isteyen akademisyenler, hukukçular ve araştırmacılar için değerli bir referans kaynağı sunmaktadır.This study aims to explore in depth the legal frameworks, regulations, and practices of labor law in Turkey and Azerbaijan within the context of employer-employee relations and labor law applications. In this framework, the Azerbaijan Labor Code, adopted on July 1, 1999, and the Turkish Labor Code No. 4857, adopted on June 10, 2003, are examined and compared. The definitions, significance, scope, and objectives of both codes are explained, and differences in aspects such as wages, employment contracts, occupational safety, work organization, rest, holidays, and leave are highlighted. This comparative analysis also addresses the economic, social, and cultural contexts of labor law practices in both countries. It evaluates the impact of labor law regulations and practices on economic growth, labor market stability, and the overall health of employer-employee relations. The findings of this study provide a comprehensive understanding of the functioning of labor law systems in both countries. Additionally, by exploring the similarities and differences in labor law, it offers valuable insights for academics, legal professionals, and researchers who wish to gain a deeper understanding of international labor law practices and discuss potential improvements
Evaluation of the effects of removable and fixed functional appliance treatments on mandibular bone using fractal analysis method
Amaç: Bu çalışmanın amacı, pubertal dönemde olan iskeletsel sınıf II maloklüzyonlu hastaların, hareketli ve sabit fonksiyonel aparey ile tedavisi sonrasında mandibular trabeküler kemikte meydana gelen değişiklikleri panoramik ve lateral sefalometrik radyografiler kullanılarak Fraktal Analiz (FA) yöntemi ile değerlendirmektir. Materyal Metot: İskeletsel sınıf II maloklüzyonu olan, normodiverjan dik yön paternine sahip, pubertal atılım döneminde olan 120 bireyin panaromik ve sefalometrik görüntüleri 4 gruba ayrılmıştır. Çalışma grupları Monoblok apareyi, Twinblok apareyi ve Herbst apareyi ile tedavi gören 30'ar hasta olacak şekilde 3 ayrı tedavi grubundan oluşmaktadır. Kontrol grubu ise tedavi görmemiş 30 bireyden oluşmaktadır. Tüm bireylerde fonksiyonel tedavi sonrası mandibulanın kondil, angulus, korpus ve simfizis bölgelerinde oluşabilecek değişiklikler FA yöntemi ile incelenmiştir. Bulgular: Tedavi gruplarında yer alan tüm bireylerin kondil, korpus ve simfizis bölgelerinin fraktal boyut (FB) değerlerinde istatiksel olarak anlamlı azalma gözlenmiştir (p0,05). Sonuç: Pubertal dönemde uygulanan sabit ve hareketli fonksiyonel aparey tedavileri mandibulanın kondil bölgesinin yeniden şekillenmesini ve böylelikle daha ileri bir pozisyonda konumlanmasını sağlamaktadır. Bununla beraber mandibulanın konumundan etkilenen masseter kasının liflerinin olduğu angulus bölgesinde rezorpsiyona dirençli bir alan olduğu gözlenmiştir. Hareketli aparey tedavilerinde, posterior dişlerin bölgedeki akrilik kütle ve bu bölgedeki dişlerin ekstrüzyonu için uygulanan selektif mölleme işlemine bağlı, mandibulanın korpus bölgesindeki trabeküler kemik yoğunluğunda azalma meydana gelmiştir. Hareketli ve sabit fonksiyonel tedavilerinin bir yan etkisi olarak gözlemlenen alt keser açılarındaki artışın, keser köklerinin bukkalinde yer alan trabeküler kemik yoğunluğunda azalmaya neden olduğu düşünülmektedir. Anahtar Kelimeler: Fonksiyonel Apareyler, Fraktal analiz, Trabeküler Kemik, Panoramik Radyografi, Sefalometrik Radyografi.Aim: The aim of this study is to evaluate the changes occurring in the mandibular trabecular bone after treatment with removable and fixed functional appliances in patients with skeletal Class II malocclusion during the pubertal growth period, using the Fractal Analysis (FA) method with panoramic and lateral cephalometric radiographs. Materials and Methods: Panoramic and cephalometric images of 120 individuals with skeletal Class II malocclusion and normodivergent vertical growth patterns in the pubertal growth period were divided into four groups. The study groups consisted of three treatment groups of 30 patients each, treated with Monoblock, Twin-block, and Herbst appliances. The control group included 30 untreated individuals. Changes in the mandibular condyle, angle, corpus, and symphysis regions after functional treatment were evaluated using the FA method in all individuals. Results: A statistically significant decrease in fractal dimension (FD) values was observed in the condyle, corpus, and symphysis regions of all individuals in the treatment groups (p0.05). Conclusion: Fixed and removable functional appliance treatments applied during the pubertal period reshape the mandibular condyle, allowing it to be positioned more anteriorly. Additionally, it was observed that the angle region, influenced by the fibers of the masseter muscle attached to the mandible, forms a resistant area to resorption. In treatments involving removable appliances, a decrease in trabecular bone density in the mandibular corpus region occurred, likely due to the acrylic mass in the posterior region and selective grinding applied for the extrusion of posterior teeth. The increase in lower incisor angles observed as a side effect of removable and fixed functional treatments is thought to cause a reduction in trabecular bone density on the buccal side of incisor roots. Key Words: Functional Appliances, Fractal Analysis, Trabecular Bone, Panoramic Radiography, Cephalometric Radiography
Volatilome profile (HS-SPME/GCeMS) and proteolysis in Beyaz peynir (white-brined cheese) made using different probiotic adjunct cultures and ripening under brine or vacuum package systems, and chemometric analysis
Probiotic Beyaz peynir (white -brined cheese) was manufactured using two different adjunct probiotic bacteria (Lactobacillus acidophilus DSMZ 20079 and Bifidobacterium bifidum DSMZ 20456) and the influence of these bacteria and different packaging systems (vacuum package and under brine) on the changes in the volatilome and proteolysis throughout the ripening was investigated. Packaging type, addition of the adjunct culture, and ripening time changed the volatilome profile and proteolysis of the cheeses both qualitatively and quantitatively. A total of 54 volatile compounds and their levels greatly differed among the cheeses depending on the factors studied. Principal component analysis (PCA), partial least squares -discriminant analysis (PLS-DA), and heatmap clustering analysis were performed to distinguish the different components in the cheeses in relation to their ripening time, adjunct culture, and packaging types. PCA and heatmap clustering analysis results were in accordance with each other. The models provided a good tool for discriminating the volatile compounds of Beyaz peynir samples in terms of the treatments applied. (c) 2024 Elsevier Ltd. All rights reserved
Pictorial interpretations on the window image as a geometric element of multi-storey urban architecture
Endüstri ve teknolojinin gelişmesiyle birlikte ilk dönemlerde tek kattan oluşan mimari yapılar, modernleşmeye bağlı olarak çok katlı mimariye dönüşmüştür. Bunun sonucunda, modernleşme sürecinin bir ürünü olan mimari, teknolojinin ve endüstri yapılarının çoğalmasıyla yerini kent mimarisine bırakmıştır. Resim sanatının en eski belgeleri olarak görülen mağara resimlerinden günümüze kadar, kent imgesini ve mimari yapı elemanlarını geometrik biçimlerle birçok sanatçı eserlerinde kullanmıştır. Bu bağlamda resimsel imge olarak mimari yapılar, sanatçıların gözde konularından biri olmuştur. Buradan yola çıkılarak mimari yapı ve elemanlarının resim sanatındaki yeri araştırılmış ve resmi oluşturan mimari yapı olan pencere imgesiyle kompozisyonlar oluşturulmuştur. Bu kapsamda yapılan araştırma dört bölümden oluşturulmuş; birinci bölümde problem durumundan, problem cümlesinden, araştırmanın amacından, öneminden, sayıltılardan, sınırlılıklardan ve araştırma yönteminden bahsedilmiştir. İkinci bölümde kent imgesinin, fütürizm akımının ve geometrinin resim sanatına yansımalarından bahsedilmiştir. Ayrıca mimari imgeleri, fütürizm ve geometrik biçimlerle ele alan Batılı ve Türk sanatçılara yer verilmiş ve çalışmalarından örnekler verilerek analizler yapılmaya çalışılmıştır. İkinci bölümde son olarak, araştırma kapsamında araştırmacı tarafından yapılan üç çalışma örneklemi ile mimariyi konu alan başka sanatçıların eser örneklemlerinin karşılaştırmalarına gidilmiş ve analizleri yapılmıştır. Üçüncü bölümde ise araştırma kapsamında araştırmacı tarafından yapılan çalışmalarla ilgili genel bilgi verilmiş ve üç başlıkta ele alınmıştır. Birinci başlıkta, resimlerin oluşum süreçlerinden bahsedilmiş; ikinci başlıkta, tez kapsamında yapılan çalışmalar hakkında genel açıklamalar yapılmış; üçüncü başlıkta ise tez kapsamında yapılan çalışmalar ele alınmıştır. Sonuç kısmında araştırma genelinden elde edilen sonuçlardan bahsedilmiş; sanatçıların geçmişten günümüze kadar mimari yapı ve elemanlarını mimarinin genel formu olan geometrik biçimlerle, farklı kompozisyon ve tekniklerle eserlerinde kullandıkları görülmüştür. Anahtar Kelimeler: Kent Mimarisi, Geometri, Çizgi, Renk, Espas, Üç Boyut.With the development of industry and technology, architectural structures that were initially single-story have evolved into multi-story ones due to modernization. As a result, architecture, a product of the modernization process, gave way to urban architecture with the proliferation of technology and industrial structures. From the earliest art documents, such as cave paintings, to the present day, many artists have incorporated the imagery of cities and architectural elements using geometric shapes. In this context, architectural structures and elements have become favored subjects for artists, and compositions have been created using the architectural image, particularly the window, as a visual element. The research conducted in this context is divided into four sections. The first section discusses the problem statement, research purpose, importance, constraints, and research methods. The second section explores the reflections of the urban image, the futurist movement, and geometry on the art of painting. It also includes Western and Turkish artists who engage with architectural images, futurism, and geometric forms, providing examples of their works and conducting analyses. Finally, in the second section, the research compares and analyzes three sample works created by the researcher within the scope of the study with examples of works by other artists focusing on architecture. In the third section, general information is provided about the works conducted by the researcher within the scope of the research, covering three main topics. The first topic discusses the formation processes of the paintings, the second topic provides general explanations about the works conducted within the scope of the thesis, and the third topic delves into the works conducted within the scope of the thesis. The conclusion section discusses the results obtained from the overall research. It is observed that artists from the past to the present have used architectural structures and elements in their works with geometric shapes, different compositions, and techniques, reflecting the general form of architecture. Keywords: Urban Architecture, Geometry, Line, Color, Space, Three Dimensions