MEF University

MEF University Institutional Repository
Not a member yet
    2045 research outputs found

    The legal position of the promiser in the commitment of the third parties act

    No full text
    Üçüncü kişinin fiilini üstlenme (TBK m. 128) yapısını konu edinen tezimiz temelde, üstlenenin borçları ve ödeme talebi karşısındaki savunmalarını konu edinmektedir. Öncelikle, kurumun, genel yapısı tanıtılarak, tarihsel gelişimine ilişkin açıklamalar getirilmektedir. Akabinde ise üçüncü kişinin fiilini üstlenmenin hukuki niteliği öğreti ve yargı kararlarında yer alan tartışmalar dikkate alınarak ortaya konulmaya çalışılacaktır. Bu noktada, özellikle, garanti sözleşmeleri ile olan ilişkisi üzerinde de özel olarak durulmaktadır. Genel yapısı ve hukuki niteliği ortaya konulduktan sonra üçüncü kişinin fiilini üstlenme sözleşmesinin özellikleri ve geçerlilik şartları detaylı olarak izah edilecektir. Burada ise kurumun, TBK m. 603 ile olan ilişkisi de ayrıca açıklanmaya muhtaçtır. TBK m. 603 yapının şekil ve geçerlilik şartları noktasında büyük önem arz etmektedir. Genel kabul ise TBK m. 603 düzenlemesinin yollamasıyla TBK m. 583 ve 584'te yer alan kefaletin şekline ve ehliyete ilişkin düzenlemelerin, üçüncü kişinin fiilini üstlenme sözleşmesi bakımından da uygulanması yönündedir. İlgili düzenleme iki kurumu birbirine yaklaştırdığı için her iki kurumun ayrımının tespit edilmesi de uygulama bakımından oldukça önemlidir. Bu noktada ise kefaletin feri, üstlenme sözleşmesinin ise bağımsızlık özelliği bize yardımcı olacak olup; iki kurumun ayrımı bakımından teminatın işbu özelliğinin tespit edilmesi gerekecektir. Bunun yanı sıra, üçüncü kişinin fiilini üstlenme ile benzerlik arz eden diğer yapılar ile olan ilişkisi de incelenerek farklı yönleri ortaya konulacaktır. Böylece, düzenlemenin uygulama alanı ve kendisine özgü, diğer kurumlardan ayrılan yönleri de daha rahat tespit edilebilecektir. Yine, garanti sözleşmesi ile birlikte üçüncü kişinin fiilini üstlenmesi sözleşmesi ile adı sıklıkla anılan banka teminat mektupları ile olan ilişkisi de değerlendirmeye alınacaktır. Üçüncü kişinin fiilini üstlenme yapısını ete kemiğe büründürdükten sonra ise üstlenenin borcu üzerinde durulacaktır. Özellikle, üstlenenin borcunun doğumunun ve muaccel hale geldiği anın tespiti ile üstlenenin borcunun kapsamı belirlenmelidir. Üstlenen, üçüncü kişiye ait bir riski üzerine almaktadır. Diğer bir ifade ile risk neticesinde ortaya çıkacak olan zarar miktarından sorumlu olmaktadır. Bu bakımdan, risk, meydana geldiği takdirde üstlenenin, alacaklının hangi zararlarından, ne oranda sorumlu olacağının tespit edilmesi gerekecektir. Üstlenen, kendisinden talepte bulunulduğu takdirde, kayıtsız şartsız bir ödeme borcu altına girmemektedir. O da her borçlu gibi gerek genel hükümler çerçevesinde sözleşmenin geçersizliğine, gerek üstlenme sözleşmesi kapsamında sahip olduğu defi ve itirazları gerekse de risk meydana gelmediği takdirde riskin meydana gelmediğini öne sürerek ödemeden kaçınabilecektir. Bunun sonucu olarak, alacaklı tarafından ödeme talebinde bulunulduğu takdirde üstlenenin, ödemeden kaçınabileceği haller de arz edilecektir. Üstlenenin, ödemeden kaçınmasını gerektiren bir halin var olmaması halinde ödeme yapması gerekecektir. Bu noktada, üstlenenin, lehine teminat sağladığı (riskini üzerine aldığı) kişiye hangi hal ve şartlarda başvurabileceğine de tezin son bölümünde değinilmiştir. Son olarak ifade edilecektir ki, Avrupa Sözleşmeler hukukunun (Principles of European Contract Law) yeknesaklaşması konusunda ortaya konulan teminat hukuku özelindeki prensipler de ilgili yerlerde dipnot olarak çalışmamıza eklenmiştir.The topic of this thesis called The Legal Position of the Promiser in the Commitment of the Third Parties Act essentially consist of promiser's debts and defenses. First of all, the general structure of institution is introduced and explanations about its historical background are given. Then, legal nature of commitment of third parties' acts are presented in order to doctrine and judicial decisions. At this point, its relationship with guarantee contracts is also specially emphasized. After presented general structure and legal nature, the characteristics and validity terms of the institution will be explained in detail. In this respect, TCO 603 has vital role, and it has of great importance in terms of the shape and validity requirements of the structure. The general acceptance is that the arrangements regarding the validity conditions and ability of the suretyship agreement in TCO 583 and 584 should also be applied in terms of the contract to undertake the act of the third party with the sending of the regulation TCO 603. Since the relevant regulation brings the two institutions closer together, it is also very important to determine the distinction between the two institutions in terms of practice. The main differences between them are that whether it is primary or ancillary guarantee. According to them, suretyship is ancillary and commitment of third parties act is the primary guarantee. In addition to this, its relationship with other structures that are like assuming commitment of the third parties act will be examined and its different aspects will be revealed. Thus, the application area of the regulation and its specific aspects that differ from other institutions can be determined more easily. Also, guarantee agreement and bank letters of guarantee, which is be mentioned with commitment of third parties act, will be evaluated. After embodying the structure of the commitment of third parties act, the debt of the promiser will be emphasized. In particular, the scope of the promisor's debt should be determined with the determination of the birth of the debt and the moment when it becomes due. The promiser undertakes a third parties' risk. In other words, it is responsible for the amount of damage that will take place because of the risk. In this respect, it will be necessary to determine which damages the promiser will be liable for and to what extent, if the risk occurs. Also, the promiser's debts do not an unconditional debts obligation if requested from creditor. Like every debtor, promisor will be able to avoid payment by contractual invalidity within the framework of general provisions, invalidity of the scope of commitment of third parties act and also if the risk does not occur, he can on the basis this. As a result of this, if the creditor demand payment, there will be some defenses in which the promisers can avoid payment. The promiser will have to be fulfill his debt if there is no condition that requires promiser to avoid payment. At this point, it is also mentioned in the last part of the thesis under which conditions and conditions the promiser can recourse to the third person for whom promisor provides collateral (for which she takes the risk). Finally, it will be stated that the principles specific to the law of personal security (guarantee), which were set forth on the uniformization of the Principles of European Contract Law, have also been added to our work as footnotes in the relevant places

    Hermes training activities (O3) future directions

    No full text
    ...Eylü

    No full text
    KH00079MEF Üniversitesi Kütüphanesi Teknik Hizmetler Birim Sorumlusu Bahar Biçen Aras 15/09/2019 tarihinde, Tarık Akan Toplantıları kapsamında düzenlenen “Bilgi ve Bilgi Yönetimi Alanında Kurum Kültürü ve Politikası” adlı toplantının ikinci oturumunda “Akademik Kütüphanelerde Politika Oluşturma İhtiyacı ve İstanbul’daki Vakıf Üniversitesi Kütüphanelerinde Durum” başlıklı konuşmasıyla programda yer aldı.Mayı

    No full text
    KH00035MEF Kütüphane bilişim ve iletişim teknolojileri birim sorumlusu Ramazan Çelik, 03/09/2021 tarihinde ÜNAK/TKD çevrimiçi staj programı kapsamında Ankara Yıldırım Beyazıt Üniversitesi Bilgi ve Belge Yönetimi bölümü öğrencilerine “DSpace Uygulamaları Eğitimi” verdi.Nisa

    A benchmark dataset for Turkish data-to-text generation

    No full text
    In the last decades, data-to-text (D2T) systems that directly learn from data have gained a lot of attention in natural language generation. These systems need data with high quality and large volume, but unfortunately some natural languages suffer from the lack of readily available generation datasets. This article describes our efforts to create a new Turkish dataset (Tr-D2T) that consists of meaning representation and reference sentence pairs without fine-grained word alignments. We utilize Turkish web resources and existing datasets in other languages for producing meaning representations and collect reference sentences by crowdsourcing native speakers. We particularly focus on the generation of single-sentence biographies and dining venue descriptions. In order to motivate future Turkish D2T studies, we present detailed benchmarking results of different sequence-to-sequence neural models trained on this dataset. To the best of our knowledge, this work is the first of its kind that provides preliminary findings and lessons learned from the creation of a new Turkish D2T dataset. Moreover, our work is the first extensive study that presents generation performances of transformer and recurrent neural network models from meaning representations in this morphologically-rich language.WOS:0008345972000012-s2.0-85134849907Science Citation Index ExpandedArticleUluslararası işbirliği ile yapılmayan - HAYIRAğustosYÖK - 2021-22Temmu

    Robot-Assisted Drilling on Curved Surfaces with Haptic Guidance under Adaptive Admittance Control

    No full text
    Scientific and Technological Research Council of Turkey (TUBITAK) [EEEAG-117E645]This work was supported by the Scientific and Technological Research Council of Turkey (TUBITAK) under contract number EEEAG-117E645Drilling a hole on a curved surface with a desired angle is prone to failure when done manually, due to the difficulties in drill alignment and also inherent instabilities of the task, potentially causing injury and fatigue to the workers. On the other hand, it can be impractical to fully automate such a task in real manufacturing environments because the parts arriving at an assembly line can have various complex shapes where drill point locations are not easily accessible, making automated path planning difficult. In this work, an adaptive admittance controller with 6 degrees of freedom is developed and deployed on a KUKA LBR iiwa 7 cobot such that the operator is able to manipulate a drill mounted on the robot with one hand comfortably and open holes on a curved surface with haptic guidance of the cobot and visual guidance provided through an AR interface. Real-time adaptation of the admittance damping provides more transparency when driving the robot in free space while ensuring stability during drilling. After the user brings the drill sufficiently close to the drill target and roughly aligns to the desired drilling angle, the haptic guidance module fine tunes the alignment first and then constrains the user movement to the drilling axis only, after which the operator simply pushes the drill into the workpiece with minimal effort. Two sets of experiments were conducted to investigate the potential benefits of the haptic guidance module quantitatively (Experiment I) and also the practical value of the proposed pHRI system for real manufacturing settings based on the subjective opinion of the participants (Experiment II). The results of Experiment I, conducted with 3 naive participants, show that the haptic guidance improves task completion time by 26% while decreasing human effort by 16% and muscle activation levels by 27% compared to no haptic guidance condition. The results of Experiment II, conducted with 3 experienced industrial workers, show that the proposed system is perceived to be easy to use, safe, and helpful in carrying out the drilling task.IEEE,Royal Soc Japan,IEEE Robot & Automat Soc,IES,SICE,New Technol FdnWOS:0009083682021152-s2.0-85146352560Conference Proceedings Citation Index – ScienceProceedings PaperUluslararası işbirliği ile yapılmayan - HAYIRMartYÖK - 2022-2

    No full text
    KH00046MEF Kütüphane direktörü Ertuğrul Çimen, 20/01/2021 tarihinde, ÜNAK Web Seminerleri kapsamında gerçekleştirilen "Akademik teşvik ve kütüphaneler" adlı seminerde moderatör olarak yer aldı.Nisa

    Learner Profile Attributes in IB Teaching: Insights from a Continuum School in Turkey

    No full text
    This article presents findings from a case study of a K-12 school in Turkey where teachers shared perceptions of how the International Baccalaureate Learner Profile attributes related to their own practice. While discussing the interdependency of the attributes, teachers considered that being an inquirer is the most valuable attribute for effective International Baccalaureate teachers. Participants at all grade levels believed that being open-minded and reflective were important attributes. Despite the importance of inquiry, participants shared that they feel most capable of implementing the attribute of being knowledgeable. The conceptual framework developed for this study may be used by schools and teacher educators to develop attributes of teachers who can help students become global citizens with intercultural understandings.WOS:0008866266000012-s2.0-85143163238Emerging Sources Citation IndexArticleUluslararasi isbirligi ile yapilan - EVETYÖK - 2022-23Kasi

    No full text
    KH00072MEF Kütüphane direktörü Ertuğrul Çimen, 08/01/2020 tarihinde Marmara Belediyeler Birliği tarafından düzenlenen 13. Kebikeç Seminerleri kapsamında gerçekleştirilen “Türkiye’de Üniversite Kütüphaneleri” başlıklı oturumda “Yeni öğrenme yöntemleri ve akademik kütüphanelerin geleceği” başlıklı sunumu gerçekleştirdi.Mayı

    International commercial mediation and enforceability

    No full text
    Uluslararası ticari uyuşmazlıklarının çözümünde alternatif uyuşmazlık çözümlerinden arabuluculuk yaygın olarak uygulanmaktadır. Ancak devlet yargılaması ve tahkim kadar sıklıkla uygulanmamaktadır. Arabuluculuk faaliyetinin bu tip uyuşmazlıklarda sıklıkla uygulanmamasının sebebi, tarafların mutabakatı sonucunda düzenlenen anlaşma belgesinin icra edilebilirliğinin sorun teşkil etmesidir. Tahkim ve devlet mahkemeleri sonucunda çıkan kararların icra edilebilirliği gerek iç hukuklarda gerekse uluslararası anlaşmalarla sağlanabildiğinden icra edilebilirlik sorunu ile karşılaşılmamaktadır. Bu tezin amacı, uluslararası ticari uyuşmazlıkların sonucunda düzenlenen anlaşma belgelerine yani sulh anlaşmalarına icra kabiliyeti kazandırılmasının yollarını araştırmaktır. Tezin ilk bölümde alternatif uyuşmazlık çözümleri hakkında genel bilgi verilmiştir. Ayrıca arabuluculuk faaliyetinin tanımı ve tarihsel gelişimi, diğer alternatif uyuşmazlık çözüm yollarından ayrıştırılması, farklı hukuk sistemlerinde arabuluculuk çözüm yolunun yeri ve ilgili düzenlemeler ve son olarak Türk Hukuku'ndaki arabuluculuk düzenlemesi olan 6325 sayılı Hukuk Uyuşmazlıklarında Arabuluculuk Kanunu incelenmiştir. İkinci bölümde ise uluslararası ticari uyuşmazlıkların arabuluculuk çözümü ile sonuçlandırılması sonucunda düzenlenen anlaşma belgesi hakkında genel bilgi verilmiş olup nasıl düzenleneceği, içeriği, kapsamı hususlarında bilgi verilmiştir. Ayrıca icra edilebilmesi ve kesin delil etkisinin kazandırılması için büyük önem taşıyan hukukî niteliği hakkında inceleme yapılmıştır. Ayrıca anlaşma belgesinin milletlerarası niteliğe sahip olması için hangi özellikleri Türk Hukuku ve uluslararası anlaşmalar uyarınca bünyesinde bulundurması gerektiği hususunda araştırma yapılmıştır. Devamında milletlerarası arabuluculuk anlaşma belgelerinin icra sorunu incelenmiş, bu kapsamda uluslararası sözleşme olmaması durumunda anlaşma belgesine icra kabiliyeti kazanabilmenin yolları aranmıştır. Bu yollardan biri anlaşma belgesinin mahkeme kararına çevrilmesidir. Bu durumda sınır-ötesi icrasının sağlanabilmesi için örneğin Türk Hukuku'nda MÖHUK hükümlerine göre tanınması yapılacaktır. Anlaşma belgesinin hakem kararına çevrilmesi de diğer bir yoldur. Hakem kararına çevrilen anlaşma belgesi, 1958 tarihli Yabancı Hakem Kararlarının Tanınması ve Tenfizi Hakkında New York Sözleşmesi uyarınca eğer ilgili devlet bu sözleşmeye tarafsa, tanıma ve tenfizi yapılabileceğinden icra kabiliyeti ve kesin delil etkisi kazanabilecektir. Son olarak ise uluslararası milletlerarası anlaşma belgesinin icra sorununu ele alan uluslararası bir sözleşme yapma ihtiyacı ele alınmıştır. Son bölümde Birleşmiş Milletler Uluslararası Ticaret Hukuku Komisyonu'nun (UNICITRAL) düzenlediği Ticari Uyuşmazlıklara İlişkin Arabuluculuk Faaliyeti Sonucunda Yapılan Milletlerarası Sulh Sözleşmeleri Hakkında Birleşmiş Milletler Sözleşmesi (Singapur Sözleşmesi), arabuluculuk anlaşma belgelerinin icra edilebilirlik açısından incelenmiştir. Sözleşme'nin uygulanabilmesi için gereken maddi ve usuli şartlar tezde incelenmiştir. Kapsam dışında kalmasına sebep olan ret sebepleri detaylı olarak ele alınmıştır. Singapur Sözleşmesi, akit devletler nezdinde sorunun çözümü hususunda önemli adımdır. Akit olmayan devletler açısından hala uluslararası anlaşma belgesinin icra edilebilirliği sorun teşkil etmektedir. Singapur Sözleşmesi'nin New York Sözleşmesi benzeri bir başarı kazanıp kazanamayacağını zaman gösterecektir.Mediation, one of the alternative dispute resolutions, is not as commonly used as court jurisdiction and arbitration in the resolution of international commercial disputes due to lack of enforceability of the agreement document. The enforceability of decisions of the court jurisdiction and arbitral awards is ensured by domestic laws and international agreements. The subject of this thesis is to provide a framework for enforcement of mediation settlement agreements that focus on international commercial disputes. The first chapter of this thesis begins a general information about alternative dispute resolutions. It continuous with its definitions, historical development as well as separation from other alternative dispute resolutions. The chapter ends with discussions of the place of mediation in the different legal system, related regulations, including HUAK, the mediation regulation in Turkish Law. The second chapter examines the agreement document that is prepared at the end of the mediation process for resolved international commercial disputes. The agreement document's preparation, content and scope are discussed in terms of its enforceability and its ability to conclusively prove the dispute is resolved. The chapter continues with a discussion on improving the international character of the document especially in terms of necessary features to be included for its effectiveness in Turkish Law and international agreements. The discussion has been expanded to include the enforceability of the agreement document in the case of the out-of-scope international contracts. It is argued that one of these ways is the conversion of the agreement document into a court decision. In such a case ensuring cross-border enforcement is one option. For example, in case of Turkey, the agreement documents' recognition in accordance with MÖHUK articles of Turkey will be necessary. Another option is the conversion of the agreement document into an arbitral award. The New York Convention states that in the countries party to this convention recognition and enforceability of the document can be obtained. The second chapter ends with detailed information about the need of making international contract about enforceability of the agreement document. The last chapter gives information about the United Nations Convention to International Settlement Agreements Resulting from Mediation (Singapore Convention). A further investigation is carried out regarding the corporal and procedural applicability of the Singapore Convention. A special attention is given to a detailed examination of reasons for the refusals that rendered them inapplicable. Singapore Convention resolves the problem for the contracting states. However, the enforceability of the international agreement document in non-contracting states still poses a problem. Time will tell if the Singapore Convention will achieve a similar success to the New York Convention

    3

    full texts

    2,045

    metadata records
    Updated in last 30 days.
    MEF University Institutional Repository
    Access Repository Dashboard
    Do you manage Open Research Online? Become a CORE Member to access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard! 👇