13949 research outputs found
Sort by
Investigating droplet separation efficiency in wire-mesh mist eliminators in bubble column
Effects of design parameters on performance of wire-mesh mist eliminators were experimentally investigated in 15cm bubble column. The demisters performances were evaluated by droplet collection efficiency as a function of wide ranges of operating and design parameters. These parameters include: droplet size exiting the demister (250-380μm), specific surface area (236-868m2/m3), void fraction (97-98.3%), wire diameter (0.14-0.28mm), packing density (130-240kg/m3), and superficial gas velocity (0.109-0.118m/s. All demisters were 15cm in diameter with 10cm pad thickness, made from 316L stainless steel layered type demister pad wires. Experiments were carried out using air-water system at ambient temperature and atmospheric pressure. The experimental data on the droplet removal efficiency were obtained using Malvern Laser Droplet Sizer. The removal efficiency was found to increase with the increasing the demister specific surface area, packing density, and superficial gas velocity. In contrast, the removal efficiency was found to increase with decreasing the demister void fraction and wire diameter. The separation efficiency is correlated empirically as a function of the design parameters. A good agreement was obtained between the measured values and the correlation predictions with ±5% accuracy
Non-invasive imaging of shallow bubble columns using electrical capacitance tomography
This paper deals with application of non-invasive electrical capacitance tomography to study the hydrodynamics of shallow bed bubble columns. Two bubble columns with different height to diameter ratio were used. Air-kerosene system that represents dielectric two-phase mixture was investigated. The ECT provided good measurement of the gas holdup at different gas velocities compared to the classical pressure measurements. The ECT was able to provide the gas hold up and the bubble velocities distribution across the column diameter at different gas velocities. The study revealed that spatial gas holdup and bubble velocity distributions are sharp with parabolic shape in the small bubble column (HD /DC = 5). However, in the large bubble column (HD /DC = 4) the gas holdup and bubble velocity profiles were flatter indicating improvement in the mixing homogeneity and leading to well-mixed reactor. 3D graphical visualization of the flow regimes and transition points were also examined using the ECT. In the small bubble column flow regimes were heterogeneous to slugs flow especially at high flow rate, resulted in downward flow near the walls and imperfect mixing.
Investigation studies of vapor side corrosion in a multistage flash desalination pilot plant
Vapor side corrosion (VSC) is one among different forms of corrosion encountered in multistage flash desalination (MSF). Vapor side corrosion is generally provoked and enhanced due to the presence of CO2, O2 and other non-condensable gases. Vapor side corrosion exhibits a major problem in both acid as well as additive dosed MSF plants. Although VSC has been reported by many workers in desalination field, only few studies were carried out in laboratory simulating real plant environment. The impact of vapor side environment on the corrosion rate of two commonly used materials of construction Cu-Ni 70/30 and Cu-Ni 90/10 was investigated at three levels of study through research program at an MSF actual plant, MSF pilot plant and in bench scale experimental up. This paper reports the studies carried out at an MSF pilot plant with capacity 20 m3/d located at SWCC Al Jubail (SWDRI) by exposing Cu-Ni 70/30 and Cu-Ni 90/10 at four different top brine temperatures employed usually in MSF plants (90°C, 100°C,110°C and 119°C). The coupons exposed for 20 days in stage one, three and stage five in vertical and horizontal positions. Each stage has different temperature at brine and vapor sides. Experiments were carried out using actual chlorinated seawater from the Arabian Gulf. The results indicate that 70/30 Cu-Ni is more corrosion resistant than 90/10 Cu-Ni alloys. The corrosion rate for the coupons in horizontal position is higher than in vertical position tests. There is no clear effect of top brine temperature on the corrosion rate of copper nickel alloys. The corrosion rate at 90°C is higher than at 119°C which indicates that the air leakage is a strong factor and also the corrosion rate in stage three is more than in another stage in some tests. Different techniques employed in these studies include weight loss measurement, SEM and EDX. © 2010 Desalination Publications.
A novel low SAR PIFA for mobile terminal
This paper proposes a novel low SAR PIFA structure to reduce exposure of the human head to mobile-set antenna radiation. Dual-band PIFA structures operating at 0.9 GHz and 1.8 GHz bands are considered. SAR is decreased by reducing the back-radiation coming from the patch and the ground plane. This SAR reduction is accomplished by inserting a thin metallic layer between the patch and the ground plane to reduce the current flowing in the ground plane. This layer is connected to the ground plane through few posts located at selected optimum positions. Additionally, three vertical sidewalls are used to reduce radiation from the patch to the human head. Results show that the proposed structure can reduce SAR by up to 76%. ©2010 IEEE.IEE
Investigation of new ground structure for reducing human exposure to electromagnetic fields from mobile phones
The presence of human body can significantly alter the antenna performance. The radiation efficiency and gain reduction are the examples of antenna performance reduction in the presence of human body. The bandwidth can also be increased in the vicinity of human body, especially in the case of antennas with relatively high SAR values. To protect the users from hazardous RF exposure, safety guidelines or limits called Specific Absorption Rate (SAR) have been made by Federal Communication Commission (FCC). According to IEEE, SAR is the time derivative of the incremental energy absorbed by (dissipated in) an incremental mass contained in a volume element of given density [1]. Planar Inverted F-Antenna (PIFA) is considered as one of the most suitable antenna structure for mobile handset application due to low profile, simple structures, and reasonable antenna performance [2-3]. There are many methods proposed to PIFA structure to reduce SAR levels. The simplest method is increasing the distance between human head and mobile handset antenna [4], [5]. This can be achieved by the application of back mounted antenna for mobile handset. Ferrite material has been proposed in order to reduce handset SAR values [6], [7]. The ferrite sheet is used to suppress the current flowing in the handset box. It is found that the ferrite attachment can reduce the SAR up to 57.75% due to current suppression flowing on the front side of the mobile handset. In 2006, Chan, et al have studied the effect of sidewall attachment of internal patch antenna ground plane on SAR values [8]. It is found that the sidewall attachment reduces the SAR values and reduces the radiation efficiency. © 2010 IEEE.IEE
Digital implementation of general purpose fuzzy logic controller for photovoltaic maximum power point tracker
This paper introduces an implementation of a general purpose fuzzy logic controller for use with general purpose embedded processors. This controller is used in the applications of maximum power point tracker of photovoltaic energy system as an application. However, the proposed model is very flexible to be applied in various and different applications. The design is made to be scalable in terms of number of inputs and number of membership functions (MFs) in both inputs side and output side. The proposed model was written in C language due its popularity and efficiency in embedded and control applications. An example of maximum power point tracker of photovoltaic energy system with 2-inputs/7-MFs each and 1-output/7-MFs is used for demonstration and verification purpose. The general purpose fuzzy logic controller shows consistency with the result obtained from simulation. © 2010 IEEE.IEE
صدق وثبات ومعايير اختبار المصفوفات المتتابعة المعياري لدى طلبة كلية الآداب بجامعة الامام المهدي
هدف البحث الحالي لمعرفة صدق وثبات اختبار المصفوفات المتتابعة المعياري لدى طلبة كلية الآداب بجامعة الامام المهدي في السودان واستخراج معاييره المئينية، طبق الاختبار على عينة مكونة من (393) طالباً وطالبة يشكلون (29,4%) من مجتمع البحث الذي يتكون من (1335) طالباً وطالبة، (56,9%) طلاب، و (53,1%) طالبات، تم اختيارها بالطريقة الطبقية العشوائية من أقسام الكلية المختلفة، وذلك خلال العام الدراسي (2005 – 2006م).
أظهرت النتائج تمتع الغالبية العظمى من بنود كل مجموعة فرعية بصدق الاتساق الداخلي مع الدرجة الكلية لمجموعتها الفرعية، ومع الدرجة الكلية للاختبار الكلي. كما كشفت عن تمتع جميع مجموعات الاختبار بصدق الاتساق الداخلي مع بعضها البعض ومع الدرجة الكلية للاختبار، كما حقق الاختبار صدق المقارنة الطرفية، كما تدرجت مجموعات الاختبار في الصعوبة، كما بين التحليل العاملي أن مجموعات الاختبار الخمسة تكون عاملا واحدا فقط هو القدرة العقلية العامة.
تم حساب معاملات الثبات باستخدام طريقة تحليل التباين (معادلة ألفا لكرونباخ)، و طريقة التجزئة النصفية، وذلك لكل من الطلاب والطالبات كل على حدة وللعينة الكلية، بينت النتائج تمتع الاختبار بدرجة جيدة من الثبات.
كما قام الباحث باستخراج معايير مئينية مؤقتة لعينة البحث الكلية، و أوصى باستخدام الاختبار لأغراض البحث العلمي والتشخيص التربوي والارشادي في مجتمع البحث الحال
أثر استخدام نموذج أبعاد التعلم في تنمية مهارة قراءة الخريطة والتفكير الناقد لدي تلاميذ الصف الخامس الابتدائي ذوي صعوبات التعلم
هدفت الدراسة إلى معرفة أثر استخدام نموذج أبعاد التعلم في تنمية مهارة قراءة الخريطة والتفكير الناقد لدي تلاميذ الصف الخامس الابتدائي ذوي صعوبات التعلم .
وتكونت عينة الدراسة من (54) تلميذاً من تلاميذ الصف الخامس الابتدائي من مجمع الأمير سلطان التعليمي ومدرسة بلال بن رباح ومدرسة جعفر بن طالب بمدينة الرياض خلال العام الدراسي 1429-1430هـ ومتوسط عمرهم بالسنة (10.36) بانحراف معيارى قدره (1.17) ، ومتوسط درجاتهم الخام فى اختبار الذكاء لرافن (43.54) بانحراف معيارى قدره (1.48) .
وتم تطبيق اختبار مهارة قراءة الخريطة ، اختبار مهارات التفكير الناقد ، اختبار المصفوفات المتتابعة لرافن للذكاء ، وتم استخدام دليل المعلم وكتيب التلميذ فى وحدتي الدراسة معد وفق نموذج أبعاد التعلم ، ولمعالجة النتائج والتحقق من صحة الفروض تم استخدام المعادلة العامة لمعامل الارتباط ، واختبار "ت" لدلالة الفروق بين المتوسطات ، و مربع إيتا ( η2 ) ونسبة الكسب المعدل لبلاك لمعرفة حجم الأثر وفعالية البرنامج .
وتوصلت الدراسة إلى وجود فروق دالة إحصائياً عند مستوي 0.01 بين متوسط درجات المجموعة التجريبية التي درست باستخدام نموذج أبعاد التعلم والمجموعة الضابطة التي درست بالطريقة المعتادة في اختبار مهارة قراءة الخريطة البعدي في اتجاه المجموعة التجريبية ، كما وجدت فروق دالة إحصائياً عند مستوى 0.01 بين متوسط درجات المجموعة التجريبية فى القياس القبلى والبعدى في اختبار مهارة قراءة الخريطة في اتجاه القياس البعدي ، كما وجدت فروق دالة إحصائياً عند مستوى 0.01 بين متوسط درجات المجموعة التجريبية التي درست باستخدام نموذج أبعاد التعلم والمجموعة الضابطة التي درست بالطريقة المعتادة في اختبار مهارات التفكير الناقد البعدي في اتجاه المجموعة التجريبية ، كما وجدت فروق دالة إحصائياً عند مستوى 0.01 بين متوسط درجات المجموعة التجريبية فى القياس القبلى و القياس البعدى في اختبار مهارات التفكير الناقد في اتجاه القياس البعدي
فعالية برنامج إرشادي قائم على العلاج بالفن لخفض النشاط الحركي الزائد وتحسين الانتباه لدى عينة من تلاميذ المرحلة الابتدائية ذوي صعوبات التعلم
هدفت الدراسة إلى معرفة فعالية البرنامج الإرشادي القائم على العلاج بالفن لخفض النشاط الحركي الزائد وتحسين الانتباه لدى التلاميذ ذوي صعوبات التعلم.
وتكونت عينة الدراسة من (24) تلميذاً من تلاميذ الصف الثالث الابتدائيالملتحقين ببرامج صعوبات التعلم بالمرحلة الابتدائية بمدرسة عبد الله بن عمر و مدرسة الإمام محمد بن سعود بمدينة الرياض خلال العام الدراسي 1430-1431هـ ومتوسط عمرهم بالسنة (9.04) بانحراف معيارى قدره (1.745) ، ومتوسط درجاتهم الخام فى اختبار الذكاء لرافن (41.5) بانحراف معيارى قدره (1.655) .
وتم تطبيق مقياس النشاط الحركي الزائد ، مقياس اضطراب الانتباه ، اختبار الذكاء , البرنامج الارشادي المقترح ، ولمعالجة النتائج والتحقق من صحة الفروض تم استخدام بعض الأساليب الإحصائية اللابارامترية باستخدام اختبار مان – ويتني واختبار ويلكوكسن ، ونسبة الكسب المعدل لبلاك لمعرفة حجم الأثر وفعالية البرنامج .
وأشارت النتائج إلى وجود فروق ذات دلالة إحصائية بين متوسطي رتب درجات المجموعتين التجريبية والضابطة في التطبيق البعدي في (مقياس النشاط الحركي الزائد ، مقياس اضطراب الانتباه ) في اتجاه المجموعة التجريبية ، كما أشارت النتائج إلى وجود فروق ذات دلالة إحصائية بين متوسطي رتب درجات أفراد المجموعة التجريبية في القياسين القبلي والبعدي في (مقياس النشاط الحركي الزائد ، مقياس اضطراب الانتباه ) في اتجاه القياس البعدي مما يدل على فعالية البرنامج الإرشادي في خفض النشاط الحركي الزائد وتحسين الانتباه لدى التلاميذ ذوي صعوبات التعلم. كما لا توجد فروق ذات دلالة بين متوسط رتب درجات المجموعة التجريبية في القياسين البعدي والمتابعة في(مقياس النشاط الحركي الزائد ، مقياس اضطراب الانتباه ) مما يدل على استمرار فعالية البرنامج
مجالات الابداع و دور المؤسسات الحكوميه و الاهلية و القطاع الخاص في رعاية الموهوبين
لا تخلو دولة من الدول أو شعب من الشعوب من الإبداع والمبدعين غير أن الظروف المحيطة بههذ الدولة أو تل تحكمها عوامل ذات تأثير بالغ ومباشر على عملية الإبداع والمبدعين. وهذه العوامل كثيرة جدا، منها ما يؤثر على الإبداع والمبدعين بطريقة مباشرة وهي العوامل الشخصية، ومنها ما يؤثر على الإبداع والمبدعين بطريقة غير مباشرة وهي العووامل العامة.
العوامل الشخصية تتلحص في مجموعة من المؤثرات الشخصي المباشر على المبدعين مما يؤثر على إبداعهم، ومن هذه العوامل وأهمها :
1. العامل الشخصي
2. المحيط الأسري
3. المحيط الاجتماعي
4. العامل المادي
5. العامل التربوي من خلال : 1. المدرسة، 2. المنهج، 3. المعلم، 4. المنزل.
6. العمل العمري للفرد.
أما العوامل العامة فهي العوامل الكبرى والتي في مظلتها، أنها نجد سلبيا أو أيجابيا بطريقة غير مباشر على جميع المبدعين والتي تستثني منهم سوى القلة القليلة التي تأثرت إيجابيا بالعوامل المباشرة السابقة. وهده العوامل الأكثر شمولا وهي التي أري أركز عليها في بحثي البسيط هذا ألا وهي العوامل العادية وأهمها :
1. العامل الاقتصادي للبلد
2. العامل الاجتماعي للبلد
3. العامل السياسي للبلد
4. العامل الإعلامي
5. لعامل التربوي
فبإعتقادي، لا يمكن أن تتم العناية بالموهبين إطلاقا ما لم يكن كل محيط الموهوب مستقر وإيجابي سواء أكان هذا المحيط العام وفي إطار الدول أو المحيط الخاص وفي إطار الأسرة والمحيط الاجتماعي بمفهومه الضيق "المجتمع الصغير من حول المبدع". وهنا أود أتناول في بحثي هذا أمورا كثيرة أهمها مجالات الإبداع ودور المؤسساتالحكومية والأهلية والقطاع الخاص في رعايتها وتنميتها ودور المؤثرات والعوامل الشخصية المباشرة والعوامل العامة في التأثيرات سلبا أو إيجابا على الإبداع والمبدعي