550909 research outputs found
Sort by
Emerging Commercial Satellite Communications: Telemedicine Takeaways
The following Telemedicine takeaways are presented: telemedicine needs and limitations, communication system fundamentals, basics of satellite communications, and advancements in SatCom and 5G
Evaluating Flood Forecasting System Performance in Cambodia
Every year, Cambodia experiences flooding as a result of monsoon rains and typhoons. Flood forecasting systems are designed to enable people to mitigate economic and social impacts from these events. However, in order for forecasts to be used effectively, an assessment of their accuracy is needed. This study demonstrates the performance of regional and global flood forecasting systems over the 2019 flood season. To do this, we assess the flood forecast accuracy at different forecast lead times and gauge locations in Cambodia. We then compare the flood forecast performance to satellite-based flood maps produced by the Hydrological Remote Sensing Analysis of Floods (HYDRAFloods) tool currently being co-developed by SERVIR-Mekong in collaboration with the Myanmar Department of Disaster Management. This assessment of the flood forecasting systems performance and comparison to flood extents helps (1) provide valuable information to forecasters and disaster managers as they make improvements to their models, and (2) provides support to forecast users as they evaluate the strengths and weaknesses of different systems for taking action
Using XRD to Characterize Sediment Sorting in a Mars Analog Glacio-Fluvio-Eolian Basaltic Sedimentary System in Iceland
The martian surface has a primarily basaltic composition and is dominated by sedimentary deposits. Ancient layered sedimentary rocks have been identified across the planet from orbit, have been studied in situ by the Mars Exploration Rovers and the Mars Science Laboratory rover, and will be studied by the Mars 2020 rover. These ancient sedimentary rocks were deposited in fluvial, lacustrine, and eolian environments during a warmer and wetter era on Mars. It is important to study the composition of sediments in Mars analog environments to characterize how minerals in basaltic sedimentary systems are sorted and/or aqueously altered. This information can help us better interpret sedimentary processes from similar deposits on Mars and derive information about the igneous source rocks. Sediment sorting has been studied extensively on Earth, but not typically in basaltic environments. Previous work has addressed sorting of basaltic sediments through experimental techniques and in modern eolian basaltic systems and aqueous alteration in subglacial and proglacial environments. We add to this body of research by studying sediment sorting and aqueous alteration in a glacio-fluvio-eolian basaltic system in southwest Iceland
Sub-Zero Alteration in an Isotopically Heavy Brine Preserved in a Pristine H Chondrite Xenolith
Introduction: Brecciated H chondrites host a variety of xenoliths, including unshocked, phyllo- silicate-rich carbonaceous chondrites (CCs). The brecciated H chondrite Zag (H3-6) is one of two chondrites to host macroscopic (1 - 5mm), xenolithic crystals of halite (NaCl) with aqueous fluid inclusions and organics. A ~1cm CC xenolith in Zag (Zag clast) has mineralogy similar to CI chondrites, but it has a unique bulk oxygen isotopic composition among all meteorites ((exp 17)O = 1.49 0.04 , (exp 18)O = 22.38 0.17 ). The Zag clast encloses halite in its matrix, linking the coarse, matrix halite and the xenolith to the same parent object, suggested to be hydrovolcanically active. Its bulk C and N contents are the highest among chondrites and bulk (exp 15)N is similar to CR chondrites and Bells. Insoluble organic material (IOM) in the Zag clast has D and (exp 15)N hotspots, also similar to CR chondrites and Bells (C2-ung.). We provide further isotopic characterization of the Zag clast to constrain the formation temperature and origin of its primary and secondary components
Brecciation of CM Chondrites: Cold Bokkeveld
C-complex asteroids frequently exhibit reflectance spectra consistent with thermally metamor-phosed or shocked carbonaceous chondrites, and brecciation, including Ryugu, and Bennu. Petrographic evidence of brecciation has been presented for CM, and here we reexamine Cold Bokkeveld, one of the most diverse CM breccias, as a preview of the samples to be returned from Ryugu and Bennu
Leveraging ASTM Industry Standard F3269-17 Providing Safe Operations of a Highly Autonomous Aircraft
This presentation and companion paper discuss the four critical concepts required for using the ASTM industry standard towards the certification of a highly autonomous aircraft
Deep Learning Models for Planetary Seismicity Detection
Research in planetary seismology is fundamentally constrained by a lack of data. Seismo-logical science products of future missions can typically only be informed by theoretical signal/noise characteristics of the environment or likely Earth-analogues. Although objectives can be re-assessed after some initial data-collection upon lander arrival, transfer of high-resolution data back to Earth is costly on lander power usage. Over the last several years, development of GPU computing techniques and open-source high-level APIs have led to rapid advances in deep learning within the fields of computer vision, natural language processing, and collaborative filtering. These techniques are actively being adapted in seismology for a variety of tasks, including: earthquake detection, seismic phase discrimination, and ground-motion prediction. Until the recent detection of mars quakes during the Mars InSight mission, the only other measurements of seismicity recorded outside of Earth was on the Moon during the Apollo missions between 1969 to 1977. These unique data sets have been periodically revisited using new seismological methods, including ambient noise interferometry and Hidden Markov Models. Our objective is to develop a deep learning seismic detector and use it to catalog moonquakes from the Apollo 17 Lunar Seismic Profiling Experiment (LSPE) and compare the results with those obtained by other methods. Additionally, we will assess the accuracy tradeoff between using a training set of lunar data and one composed of Earth seismicity. In this document, we present preliminary results using a prototype classifier trained on a small set of earthquakes that was able to obtain detections for LSPE moonquakes with a greater accuracy than a recent study using Hidden Markov Models
Creepy (not KREEPy) Gold-Indium Intermetallic Compounds on Secondary Ion Mass Spectrometry Samples
A series of Secondary Ion Mass Spectrometry (SIMS) sessions to measure hydrogen (H) in Martian meteorite minerals was completed using the Cameca 6f SIMS and NanoSIMS 50L at Arizona State University (ASU). During these sessions, a creeping phenomenon has occurred, where the edges of samples pressed in indium are covered by a metal alloy. We summarize these observations herein, present a collection of preliminary data, and discuss explanations and concerns for future SIMS work. We conclude the report with a research plan for further study
Cross-Cutting Computational Modeling Project: Exploration Medical Station Analysis
Astronauts will be away from Earth-based medical care for long periods during future exploration missions. Thus, it will be necessary for the astronauts to perform various medical tasks to monitor and maintain their health in the microgravity environment of space. Performance of these tasks will be constrained due to the limited volume available to perform the task, the absence of gravity and the limited resources and capabilities available in the medical work area. It is therefore necessary to evaluate exploration medical workstation designs for how well the designs will support crew performance of medical tasks. This evaluation featured two trained medical caregivers (99th percentile male, 26th percentile female) performing emergent care procedures (alone and in tandem) on a medical manikin. The procedures came from the The procedures came from the International Space Station Medical Checklist, and they are designed for spaceflight. The objectives of the evaluation included determining the operational volume required to perform the tasks, examining the effect of constraining the operational volume with partitions, determining candidate locations for foot restraints and equipment placements and determining the effect of single vs. dual caregiver on the operational volume.A marker-based motion capture system collected the motion data, which enabled computation of operational volumes and foot placement maps using custom Python code. Additional data collected included heart rate, time to perform the procedures, and feedback from the caregivers in the form of the NASA Task Load Index (TLX), the US Government System Usability Survey, and an open-ended questionnaire
Guidance and Navigation Challenges for a Mars Ascent Vehicle
This work presents studies and analysis in support of a Mars Ascent Vehicle as part of a Martian Sample Return campaign. The vehicle design has been ongoing, with rapid development of a 6 Degree of Freedom simulation to capture full vehicle dispersions and integrated performance of vehicle, guidance, navigation and control. The maturation of this simulation is presented to provide an overview of its capabilities added over the past year of effort. The results describe in detail guidance algorithm development to increase the systems robustness to thrust sensitivities. Navigation performance and sensitivity analysis are included to describe the capabilities of the current design as well as identify primary drivers of insertion performance. Lastly, integrated vehicle 6DOF statistical results are presented to provide insight into the nominal performance of the current vehicle and insight into system-level drivers. Future work is described to outline the continuing maturation and development of the MSR MAV ascent vehicle