Hatay Mustafa Kemal University Institutional Repository
Not a member yet
    2946 research outputs found

    Effects of some applications on seedling emergence of hawthorn (Crataegus azarolus L.)

    Full text link
    Bu çalışma, Hatay’ın Belen ilçesinde yaygın olarak yetiştirilen Sarı Alıç genotipine ait tohumların çıkış oranları üzerine farklı uygulamaların etkisini belirlemek amacıyla yürütülmüştür. Çalışmada 2017 ve 2018 yıllarından elde edilen endokarplı ve endokarpsız tohumlara iki katlama sıcaklığı (0℃ ve 4℃), farklı katlama sürelerinin (0, 1, 2, 3 ve 4 ay) ve endokarpsız tohumlara giberellik asit (3000 ppm) uygulamaları yapılmıştır. Uygulamalar sonrasında tohumlar doğrudan torf-perlit (3:1) karışımına ekilmiştir. Çalışma sonucunda, 2018 yılından elde edilen endokarpsız tohumlara doğrudan 3000 ppm giberellik asit uygulamasının en yüksek çıkış oranını (%60.00) verirken, en düşük çıkış oranının endokarplı tohumda olduğu (%5.00) belirlenmiştir. Katlama sıcaklıkları çöğürlerin çıkış oranlarını etkilemiş ve endokarpsız tohumlara 4℃’de 1 ay bekletme sonrasında 3000 ppm giberellik asit uygulamasından %53.33 oranında çıkış elde edilmiştir. Sonuç olarak, Sarı Alıç genotipinde, endokarpsız tohumlara doğrudan 3000 ppm giberellik asit uygulamasının en yüksek çıkış oranını verdiği belirlenmiştir.This study was carried out to determine the effect of different applications on seed emergence of Sarı Alıç hawthorn genotype widely grown in Belen district of Hatay. In this study, in seeds with endocarp and without endocarp sampled from 2017 and 2018 and two stratification temperatures (0℃ and 4℃), different stratification times (0, 1, 2, 3 and 4 months) and seeds without endocarp applied with 3000 ppm GA₃ applications were evaluated. After the applications, the seeds were sown directly into the peat-perlite (3:1) mixture. As a result of the study, the highest seedling emergence (60.00%) was found in seeds without endocarp (sampled from 2018) treated with 3000 ppm GA₃, while the lowest emergence was found to be seeds with endocarp (5.00%). The stratification temperatures affected seedling emergence and emergence rate of 1 month stratification at 4℃+3000 ppm gibberellic acid application for seeds without endocarp was 53.33%. As a result, the highest emergence rates in Sarı Alıç hawthorn genotype was found in gibberellic acid application (3000 ppm) to seed without endocarp

    Identification of walnut stem canker disease agent Botryosphaeria dothidea and determination of in vitro antifungal efficiencies of some fungicides against the disease agent

    Full text link
    Amaç: Çalışmada Hatay’ın İskenderun ilçesinde Mayıs 2019 tarihinde ceviz bahçelerdeki ceviz ağaçlarında, iletim dokularında kahverengi-koyu kahverengi renk değişikliği, odun dokusu nekrozu ve dallarda geriye doğru ölüm hastalık belirtilerine neden olan fungal etmenin tanılanması ve etmenin bazı fungisitlere karşı duyarlılık düzeylerinin belirlenmesi amaçlanmıştır. Yöntem ve Bulgular: Hastalıklı dallardan, kanserlerden ve belirti göstermeyen ceviz örneklerinden yapılan izolasyonlar sonucunda elde edilen fungal izolat morfolojik ve moleküler çalışmalara göre Botryosphaeria dothidea olarak tanılanmıştır. Patojenisite denemeleri, fungal izolatın bölgede yetiştirilen Chandler çeşidi ceviz ağacı sürgünlerinde oldukça virülent olduğunu göstermiştir. Mevcut bilgilerimize göre bu çalışma, Türkiye’de cevizi enfekte eden Botryosphaeria dothidea’nın ilk raporudur. Fluazinam (0.001-0.015 µg/ml), thiophanate-methyl (0.1-10.0 µg/ml), boscalid + pyraclostrobin (1.0-50.0 µg/ml), trifloxystrobin (0.5-50.0 µg/ml), kresoxim-methyl (0.1-50.0 µg/ml) ve tebuconazole (0.5-50.0 µg/ml) gibi 6 farklı fungisitin farklı konsantrasyonlarının, fungal etmene karşı in vitro antifungal etkileri belirlenmiştir. Fungisitlerin ortalama etkili konsantrasyon (EC50) değerleri, Probit analiziyle belirlenmiştir. Hesaplanan EC50 değerlerine göre hastalık etmenine karşı en etkili fungisit fluazinam (0.002 µg/ml) olarak kaydedilmiş olup, bu fungisiti thiophanate-methyl (0.275 µg/ml), tebuconazole (0.994 µg/ml), boscalid + pyraclostrobin (3.993 µg/ml) ve trifloxystrobin (4.262 µg/ml) izlemiştir. En düşük antifungal etkinlik fungisitler arasında misel gelişimini %37.5 oranında engelleyen kresoxim-methyl tarafından gösterilmiştir. Genel Yorum: Bu çalışma fungal etmen Botryosphaeria dothidea’nın Türkiye’de yetiştirilen ceviz ağaçlarında gövde kanseri hastalığa neden olduğunun ilk kayıdıdır. Elde edilen sonuçlar ayrıca Botryosphaeria dothidea’nın sebep olduğu ceviz kanser hastalığının seçilen fungisitlerin uygulanmasıyla ağaçların hastalıktan korunabileceğini önermektedir. Çalışmanın Önemi ve Etkisi: Sonuç olarak, fluazinam, thiophanate-methyl ve tebuconazole’ün fungal patojen B. dothidea’nın kontrolünde kullanım potansiyeli bulunduğunu ortaya koymaktadır.Aims: Symptoms of canker disease on walnut trees included brown to dark brown discoloration of vascular tissues, wood necrosis, and branch dieback were observed in several orchards in İskenderun City of Hatay Province in May 2018. The aims of this study were to identify the fungal pathogen and to determine its sensitivities against some fungicides. Methods and Results: Isolations were made from diseased branches, cankers and asymptomatic walnut samples and causal disease agent was identified as Botryosphaeria dothidea based on morphological characteristics and molecular techniques. Pathogenicity tests showed that fungal isolate were highly virulent on shoots of walnut (cv. Chandler) trees commonly grown in the region. To our knowledge, this is the first report of Botryosphaeria dothidea infecting walnut in Turkey. In vitro antifungal effect of different concentrations of six fungicides, fluazinam (0.001-0.015 µg/ml), thiophanate-methyl (0.1-10.0), boscalid + pyraclostrobin (1.0-50.0 µg/ml), trifloxystrobin (0.5-50.0 µg/ml), kresoxim-methyl (0.1-50.0), and tebuconazole (0.5-50.0 µg/ml) were also evaluated against the pathogen. The mean effective concentration (EC50) values were determined by Probit analysis. According to EC50 values, fluazinam (0.002 µg/ml) was recorded as the most effective fungicide and it was followed by thiophanate-methyl (0.275 µg/ml), tebuconazole (0.994 µg/ml), boscalid + pyraclostrobin (3.993 µg/ml) and trifloxystrobin (4.262 µg/ml). The lowest antifungal efficacy was followed by kresoxim-methly inhibiting mycelial growth by 37.5% at the highest concentration used.. Conclusions: To our knowledge, this is the first report of Botryosphaeria dothidea causing stem canker diseases on walnut trees grown in Turkey. Our results also suggest that the walnut canker disease caused by Botryosphaeria dothidea could be reduced effectively with the application of selected fungicides. Significance and Impact of the Study: In conclusion, our results suggest that fluazinam, thiophanate-methyl and tebuconazole have the potential effects to control Botryosphaeria dothidea

    Investigation of the relationship between physical activity and body mass index in children with down syndrome

    Full text link
    Aim: This study aimed was to investigate the relationship between physical activity levels and the Body Mass index (BMI) of children with Down syndrome (DS). Materials and Methods: This study included 26 children (15 male, 11 female) with DS. In this study, demographic information was recorded, the physical activity was measured with the Eurofit battery; body fat content, muscle weight, protein content, body fluid ratio and basal metabolic rate were measured by Bioelectric Impedance Analysis. Results: The mean age of the participants was 10.96±2.94 years and the mean BMI of the participants was 21.51±6.719. There was moderate correlation between general fat weight and arm motion speed (r=0,40); moderate correlation between sit and reach test and general fat weight (r=-0.45), trunk fat weight (r=-0.52), liquid ratio (r=0.54); moderate correlation between basal metabolic rate and right hand grip strength (r=0.73), right arm weight without fat (r=0.70), right arm muscle weight (r=0.69), basal metabolic rate (r=0.73); left hand grip muscle with left arm muscle weight (r=0.74), left arm weight without fat (r=0.75), basal metabolism rate (r=0.72), mineral amount (r=0.83), amount of protein (r=0.83); moderate correlation between thirty-second shuttle and body fat percentage (r=-0.44), liquid ratio (r=0.45), body density (r=0.46); moderate correlation between twisted arm hanging strength and fat rate in arm (r=-0.47) with trunk fat rate (r=-0.40), fat weight (r=-0.39); moderate correlation between twenty-meter resistance and trunk fat rate (r=-0.40). Conclusion: It was seen that the physical activity level decreased as the fat ratio increased in individuals with DS. Basal metabolic rate, fluid ratio, and physical activity were found to be correlated

    COVID-19 pandemic and the global perspective of Turkish Thoracic Society

    Full text link
    It has been more than 3 months now since the first case of COVID-19 was reported in Turkey. Globally, the number of confirmed cases and deaths reached 9,653,048 and 491,128 respectively, as reported by 216 countries by June 27, 2020. Turkey had 1,396 new cases, 194,511 total cases, and 5,065 deaths by the same date. From the first case until today, the Turkish Thoracic Society (TTS) has been very proactive in educating doctors, increasing public awareness, undertaking academic studies, and assisting with public health policies. In the present report, social, academic, and management perspectives of the pandemic are presented under appropriate subtitles. During this critical public health crisis, TTS has once again demonstrated its readiness and constructive stance by supporting public health, healthcare workers, and the environment. This review summarizes the perspective of TTS on each aspect of the COVID-19 pandemic and casts light on its contributions

    Erken gelişme döneminde yapraktan bor uygulamasının mısırın hasıl verimi ve kalitesi üzerine etkileri

    Full text link
    Aims: This study was conducted to determine the effects of various boron quantities applied at different vegetative growth stages of maize as foliar application on hay and silage yield and quality in Mediterranean ecological conditions. Methods and Results: Different boron fertilizer doses (0, 4, 6, 8 kg ha-1 disodium octaborate tetrahydrate (ETIDOT-67 (Na2B8O13.4H2O)) applied at early vegetative stages of maize (V2, V4 and V2+V4 as two portions) and the effects of boron on yield and quality prameters of maize were examined. As a result of study, higher silage and hay yields were observed at all boron applications in comparison with control and the highest yields (68.43 ton ha-1 silage and 21.58 ton ha-1 hay yield) were obtained at 8 kg ha-1 boron application. Also other boron doses had the statistically similar results. Although the highest yields in terms of application times were observed at boron applications at V2+V4 stages as two portions, the differences between the application times were not statistically significant Conclusions: We recommend that 4 kg ha-1 boron fertilizer application at early vegetative stages of maize for high silage yield and quality. Significance and Impact of the Study: Limited researches were performed on boron effects on hay and silage yields and qualities of maize up to now. This study revealed that the effects of boron application at early vegetative period of maize. Also, it is expected to be a source for further studies.Amaç: Bu çalışma, Doğu Akdeniz ekolojik koşullarında, mısırın farklı vejetatif gelişme dönemlerinde uygulanan bor miktarlarının mısırın silaj verimi ve kalitesi üzerine etkilerini belirlemek için yapılmıştır. Yöntem ve Bulgular: Mısırın erken vegatatif gelişme dönemlerinde (V2, V4, V2V4 ), farklı borlu gübre dozları (0, 4, 6, 8 kg ha-1 . Disodyum oktaborat tetrahidrat(ETİDOT-67 (Na2B8O134H2O)) uygulanmış ve mısırın hasıl verimi ve kalitesine etkileri incelenmiştir. Yapılan çalışma sonucunda, tüm bor uygulamalarında kontrole göre daha yüksek silaj ve kuru ot verimleri gözlemlenmiş ve en yüksek verimler (68.43 ton ha-1 silaj ve 21.58 ton ha-1 kuru madde verimi) 8 kg ha-1 bor dozunda elde edilirken, diğer bor uygulama dozlarında da istatistiksel olarak benzer sonuçlar elde edilmiştir. Uygulama zamanlarında en yüksek verim V2 + V4 gelişme döneminde belirlenmiş olmakla birlikte, uygulama zamanları arasındaki fark istatistiksel olarak önemli bulunmamıştır. Genel Yorum: Yüksek silaj verimi kalitesi için mısırın erken vejetatif gelişme dönemlerinde 4 kg ha-1 bor uygulanması önerilmektedir. Çalışmanın Önemi ve Etkisi: Şimdiye kadar mısırın hasıl ve silaj verimi ile kalite özellikleri üzerine bor gübrelemesinin etkileri konusunda sınırlı araştırmalar yapılmıştır. Bu çalışma ile mısırın erken vejetatif gelişme döneminde bor uygulamasının etkileri ortaya koymuştur. Ayrıca, bu çalışmanın daha sonraki çalışmalar için kaynak olması beklenmektedir

    Parametric design in the 20th and 21th century perspective

    Full text link
    Bu çalışma, parametrik tasarım kavramını bilimsel tanımlamalar doğrultusunda değerlendirmekte, tarihsel süreçte nasıl ortaya çıktığını irdelemektedir. Çalışmanın odağını oluşturan parametrik tasarım kavramı, en temel anlamıyla ele alınan konunun birçok parametre yardımıyla çözümlenip farklı sonuçlar elde edilmesine olanak sağlayan bilgisayar destekli bir yaklaşım olarak tanımlanmaktadır. Günümüzde tasarımın her alanında önemli bir yere sahip olan bu kavramın tasarım alanında nasıl katkı sağladığı çalışmanın bir alt konusunu oluşturmuştur. Bu amaçla, parametrik tasarım kavramı nicelik ve nitelik problemi olarak ele alınmış, tasarım bilgisinin üretim aracı, temsil aracı ve inşa aracı olarak değerlendirilmesi gerektiği vurgulanmış; tarihsel süreç içerisindeki gelişimi değerlendirilmiş ve parametrik tasarım yöntemlerinden günümüz tasarımcılarının nasıl faydalanması gerektiğine odaklanılmıştır.This study evaluates the concept of parametric design in line with scientific definitions and examines how it emerged in the historical process. The concept of parametric design, which forms the focus of the study, is defined as a computer-aided approach that allows the subject to be solved with the help of many parameters and to obtain different results. How this concept, which has an important place in every field of design, contributes in the field of design, is a sub-topic of the study. For this purpose, the concept of parametric design has been addressed as the problem of quantity and quality, and it is emphasized that design knowledge should be evaluated as a means of production, means of representation and construction; Its development in the historical process has been evaluated and it has been focused on how today’s designers should benefit from parametric design methods

    Risk assessment approach for decision makers specific to the COVID-19 outbreak

    Full text link
    COVID-19 salgını hızla ilerleyen, insan sağlığını olumsuz etkileyebilecek ve hızlı müdahale edilmesi gereken akut halk sağlığı olayıdır. Henüz etkin tedavisi ve aşısı olmayan ve kolay bulaşabilen böyle bir salgını önlemek ve kontrol altına almak; salgının her evresinde risk değerlendirmesi yapmayı, müdahalelerin gözden geçirilmesini, zaman zaman önlemlerin güçlendirilip, gevşetilmesini gerektirmektedir. Bu yazıda risk değerlendirilmesi kavramı ele alınmış, ardından ülkemizde yerel düzeyde uygulamak üzere, uluslararası rehberler gözden geçirilerek COVID-19 salgınının yükselme ve iniş dönemlerinde kullanılabilecek risk göstergeleri ile bu riski yönetmek için gerekli olan müdahale göstergeleri incelenmiştir. İl düzeyinde karar vericilerin kendi durumlarını değerlendirirken dikkate alabilecekleri değişkenler sunulmuştur. Salgının kontrolüne yönelik müdahalelere yön vermede gerekli olan risk değerlendirmesinin yapılabilmesi için, uzman ekiplerin oluşturulması, sektörler ve kurumlar arası işbirliği, doğru soruların sorulması, salgınla ilgili bilgilerin erişilebilir ve şeffaf olması, etkin bir risk iletişiminin ve toplum katılımının gerekliliği vurgulanmıştır.The COVID-19 epidemic is an acute public health event that is rapidly progressing, which can adversely affect human health and requires rapid intervention. In order to prevent and control such an epidemic that does not yet have an effective treatment and vaccine and can be transmitted easily, it is necessary to make risk assessments, review interventions, and strengthen and relax the measures from time to time. In this article, the concept of risk assessment is discussed, and then, the international guidelines are reviewed and the risk indicators that can be used during the ups and downs of the COVID-19 outbreak and the intervention indicators required to manage this risk are examined. Variables that can be considered when evaluating their own situation at the provincial level are presented. In order to carry out the risk assessment required to direct the interventions to control the outbreak, it was emphasized that expert teams need to be formed, cooperation between sectors and institutions should be established, the right questions should be asked, information about the outbreak should be accessible and transparent, and effective risk communication and community participation should be assured

    Torasik özofagus kanserinde üç boyutlu konformal, yoğunluk ayarlı ve hibrit yoğunluk ayarlı radyoterapi planlama tekniklerinin karşılaştırılması

    Full text link
    Objective: The aim of this study is dosimetric comparison of 3-D conformal radiotherapy (3D-CRT), intensity modulated radiotherapy (IMRT) and hybrid IMRT (h-IMRT) planning techniques above the recommended standard treatment doses for esophageal cancer patients in terms of target volume dose distribution and critical organ protection. The routine applicability of the h-IMRT technique have also been evaluated. Material and Methods: Totally 42 treatment plans for 59.4 Gy dose were designed for 14 esophageal cancer patients with 3D-CRT, IMRT and h-IMRT techniques. Dosimetric evaluation and comparison of the techniques were performed according to the parameters of dose volume histogram (DVH), homogeneity index (HI), conformity index (CI) and monitor unit (MU) calculations. The quality control of the dose distributions was calculated by treatment planning system (TPS) and, 2-dimensional dose distributions and point absolute doses were measured with MatriXX and ion chambers respectively. Results: In all regions of the esophagus, IMRT technique was found to be more successful than the 3D-CRT and h-IMRT techniques in terms of PTV coverage. HI was in accepted limits for all techniques but, IMRT and h-IMRT techniques were better for CI. As expected, treatment duration and MU parame-ters were found to be high in IMRT technique. Conclusion: Although all plans were within acceptable limits, dosimetric comparison of different planning tech-niques, revealed that 3D-CRT had statistically significant differences from IMRT planning technique in terms of planned target volume (PTV) coverage, OAR protection, HI, CI, MU and treatment duration above the standart doses. From the aspect of treatment duration and MU parameters, h-IMRT technique can be considered as an alternative planning option.Amaç: Bu çalışmanın amacı özofagus kanserli hastalarda, hedef hacim doz dağılımı ve kritik organ korunması açısından, üç boyutlu konformal radyoterapi (3-DCRT), yoğunluk ayarlı radyoterapi (IMRT) ve hibrit IMRT (h-IMRT) planlama tekniklerinin dozimetrik olarak karşılaştırılmasıdır. H-IMRT tekniğinin rutin kullanımı da ayrıca değerlendirilmiştir. Gereç ve Yöntemler: Özofagus kanserli 14 hastaya, 3D-CRT, IMRT ve h-IMRT tekniklerinin her biri ile 59,4 Gy total doz için toplam 42 plan yapılmıştır. Dozimetrik değerlendirmeler ve tekniklerin karşılaştırılması, doz hacim histogramları(DVH), homojenite index (HI), konformite indexi (CI) ve monitör ünite (MU) hesaplama parametrelerine göre yapılmıştır . Doz dağılımlarının kalite kontrol-leri tedavi planlama sistemi (TPS) yardımıyla yapılmıştır, iki boyutlu doz dağılımları ve nokta dozlar sırasıyla MatriXX ve iyon çemberleriyle ölçülmüştür. Bulgular: Özofagusun tüm bölgelerinde IMRT tekniği PTV kapsaması açısından 3D-CRT ve h-IMRT tekniklerinden daha başarılıbulunmuştur. HI, tüm tekniklerde kabul edilebilir limitlerdedir, ancak CI açısından IMRT ve h-IMRT teknikleri daha iyi bulunmuştur. Beklenildiği üzere, tedavi süresi ve MU, IMRT tekniğinde yüksek bulunmuştur. Sonuç: Tüm tekniklerle yapılan planlamalar kabul edilebilir sınırlarda olsa da, farklı planlama tekniklerinin dozimetrik karşılaştırmaları, standart tedavi dozlarının üstündeki dozlarda 3D-CRT planlama tekniğinin PTV sarımı, riskli organ korunması(OAR), HI, CI, MU ve tedavi süresi bakımından belirgin istatistiksel farklılıkları olduğunu ortaya koymuştur. Tedavi süresi ve MU parametreleri açısından, h-IMRT tekniği alternatif planlama tekniği olarak değerlendirilebilir

    Quality parameters changes during fruit development of some persimmon cultivars grown in Eastern Mediterranean region conditions

    Full text link
    Bu çalışmanın amacı, meyve et rengi kararsız ve buruk olmayan (PVNA) çeşitlerde meyve kalitesinde görülen değişimlerin belirlenmesi ve derim olumuyla ilişkilendirilmesidir. Araştırmada Dörtyol-Hatay koşullarında Diospyros lotus anacı üzerine aşılı meyve et rengi kararsız buruk olmayan ‘Amankaki’, ‘MKÜ Harbiye’, ‘Kaki Tipo’ ve ‘Vainiglia’ çeşitleri kullanılmıştır. Çalışmada tam çiçeklenme sonrası (TÇS) 65. günden itibaren her 15 günde bir alınan meyve örneklerinde kimyasal ve fiziksel analizler (meyve ağırlığı ve çapı, meyve eti sertliği, suda çözünebilir toplam kuru madde (SÇKM) ve titre edilebilir asit (TA) miktarı, meyve kabuk ve et rengi h° ve C* değerleri) yapılmıştır. Meyve ağırlığı ve çaplarında 3 farklı aşamada tipik sigmoid büyüme görülmüş olup, I. ve III. büyüme aşamaları hızlı olurken II. büyüme aşaması yavaş seyretmiştir. Derim döneminde ‘Amankaki’ çeşidinin meyve ağırlığı (176.86 g), ‘MKÜ Harbiye’ (250.25 g), ‘Kaki Tipo’ (256.55 g) ve Vainiglia (257.69 g) çeşitlerinin oldukça gerisinde kalmıştır. Meyve eti sertliği meyve gelişimi süresince azalma göstermiş ve ‘Amankaki’ çeşidinde TÇS 155. günde, diğer çeşitlerde ise TÇS 185. günde derim olumu sınırlarına inmiştir. SÇKM miktarı bu süreçte artarken, asit içeriği az da olsa azalmıştır. Meyve kabuk ve et rengi h° değerleri gelişme periyodu boyunca azalma gösterirken, C* değerleri artmıştır. TÇS 215. günde en düşük h° ve C* değerlerinin elde edildiği ‘Amankaki’ çeşidinden diğer çeşitlere göre kırmızı renge daha yakın meyveler elde edilmiştir. Çalışma sonucunda Doğu Akdeniz Bölgesinde PVNA grubu Trabzon hurması çeşitlerinde optimum derim zamanı meyve eti sertliği ile birlikte çeşide özgü kabul edilebilir kabuk rengine ulaşması ‘Amankaki’ çeşidinde TÇS 155. günden sonra, diğer çeşitlerde ise TÇS 185. günden sonra meydana gelmiştir.The aim of this study was to determine physical and chemical changes during fruit development and their relationship with optimum harvest maturity for pollination variant non-astringent (PVNA) persimmon cultivars. ‘Amankaki’, ‘MKÜ Harbiye’, ‘Kaki Tipo’ and ‘Vainiglia’ cultivars were budded on Diospyros lotus seedlings in Dörtyol-Hatay ecological conditions. Fruits of different persimmon cultivars were obtained from 65 th day after full bloom (DAFB) at 15 days internal during fruit development. Fruit weight and width, fruit flesh firmness, total soluble solid (TSS), titratable acidity (TA), skin and flesh color (h° and C*) were measured on fruits samples. Fruit growth in weight and diameter followed a typical double sigmoid curve, consisting of two rapid growth stages, stage I and stage III, separated by a period of slow growth (stage II). Fruit weight of ‘Amankaki’ cultivar was lower (176.86 g) than those of ‘MKÜ Harbiye’ (250.25 g), ‘Kaki Tipo’ (256.55 g) and ‘Vainiglia’ (257.69 g) cultivars at harvest. Flesh firmness decreased during fruit growth and reached to an acceptable limit in 155th DAFB of ‘Amankaki’ and in 185th DAFB of other cultivars. During fruit development, the amount of TSS increased and the content of TA decreased. While hue values of fruit skin and flesh color h° values decreased during the fruit development period, C* values increased in same period. On the 215th day of TÇS, the lowest h° and C * values were obtained in the ‘Amankaki’ variety and more red-colored fruits were obtained compared to other varieties. According to the obtained findings, in the Eastern Mediterranean Region, the optimum harvest time in PVNA group persimmon varieties, along with fruit flesh firmness, reaches the variety of acceptable skin color, and in the ‘Amankaki’ cultivar occurred after 155th DAFB and in other varieties after the 185th DAFB

    The effects of different organic fertilizers on forage yield and quality of some vetch species

    Full text link
    Amaç: Ülkemizde organik gıda talebi son yıllarda giderek artmaktadır. Fakat organik tarım kapsamında hayvansal üretim besleme güçlüklerinden dolayı oldukça zordur. Bu çalışma organik kaba yem üretimi amacıyla yetiştirilen bazı fiğ türlerinin yem verimi ve kalitesi üzerine farklı organik gübre kaynaklarının etkisini belirlemek amacıyla yürütülmüştür. Yöntem ve Bulgular: Denemede, yaygın fiğ (Vicia sativa L.), macar fiği (Vicia pannonica Crantz) ve tüylü fiğ (Vicia villosa Roth) olmak üzere 3 farklı fiğ türü ve zeolit, leonardit, büyükbaş hayvan gübresi olmak üzere üç farklı organik gübre çalışmanın faktörlerini oluşturmuştur. Ayrıca organik gübre uygulamalarının etkilerini kıyaslayabilmek için gübrelemenin yapılmadığı kontrol muamelesi de kullanılmıştır. Araştırma tesadüf bloklarında bölünmüş parseller deneme desenine göre planlanmış ve üç tekerrürlü olarak yürütülmüştür. Organik gübre uygulamaları altında fiğ türlerinin ot verimi ve kalitesini belirlemek için bitki boyu (BB), yaş ot verimi (YOV), kuru ot verimi (KOV), ham kül (HK), organik madde (OM), ham protein (HP), nötr ortamda çözünmeyen lif (NDF), asitli ortamda çözünmeyen lif (ADF), asitli ortamda çözünmeyen lignin (ADL), ve nispi yem değeri (NYD) özellikleri incelenmiştir. Çalışmanın sonuçlarına göre, fiğ türleri arasında BB, YOV, HP ve ADF, açısından istatistiki anlamda bir fark bulunurken, sadece HP bakımından faktörler arasında önemli bir interaksiyon oluşmuştur. Fiğ türlerinin BB, YOV, HP ve ADF değerleri sırasıyla 86.15-148.73 cm, 1900.33- 2045.83 kg da-1 , % 19.99-21.82 ve % 30.58-35.05 arasında bulunmuştur. Diğer taraftan, interaksiyonlar arasında HP değerleri ise % 18.89-22.54 arasında değişiklik göstermiştir. Organik gübre uygulamalarının fiğ türlerinin verim ve kalitesi üzerine etkisi sınırlı olmuştur. Bununla birlikte, hayvan gübresi uygulanan tüylü fiğden 500 kg da-1 üzerinde kuru ot verimi alınabileceği belirlenmiştir. Genel Yorum: Elde edilen veriler fiğ türlerinin organik hayvancılıkta ihtiyaç duyulan kaba yemin karşılanmasında önemli bir kaynak olabileceğini ve tüylü fiğin diğer türlerden daha yüksek verime sahip olduğunu göstermiştir. Ayrıca, istatistiksel olarak önemsiz olmakla birlikte Amik Ovası koşullarında hayvan gübresinin fiğ yetiştiriciliğinde zeolit ve leonarditten daha etkili olduğu söylenebilir. Çalışmanın Önemi ve Etkisi: Organik fiğ yetiştiriciliğinde gübre kullanımı ile ilgili sınırlı sayıda çalışma vardır. Yürütülen araştırma ile organik fiğ tarımı yapan çiftçilere ve ileriki araştırmalara yardımcı olabilecek sonuçlar elde edilmiştir. Ayrıca çalışma sonucunda, kullanılan gübrelerde doz belirleme çalışmalarının yürütülmesi gerektiği sonucuna varılmıştır.Aims: This study was carried out to determine the effect of different organic fertilizer sources on forage yield and quality of some vetch species grown for organic roughage production. Methods and Results: In experiment, three different vetch species (common vetch (Vicia sativa L.), Hungarian vetch (Vicia pannonica Crantz) and hairy vetch (Vicia villosa Roth)) and three different organic fertilizers (zeolite, leonardite and cattle manure) were used as factors of the study. In addition, in order to compare the effects of organic fertilizer applications, control treatment without fertilization was used. The research was laid out in split-plot randomized complete block design with three replications. To determine the forage yield and quality of vetch species under organic fertilizer treatments, plant height (PH), fresh forage yield (FFY), dry forage yield (DFY), crude ash (CA), crude protein (CP), neutral detergent fiber (NDF), acid detergent fiber (ADF), acid detergent lignin (ADL) and relative feed value (RFV) characteristics were investigated. According to the results of this study, while statistically differences were found among the vetch species in terms of PH, FFY, CP, ADF and features, there was a difference among the interactions only in term of CP. PH, FFY, CP and ADF values of vetch species were found between 86.15-148.73 cm, 1900.33-2045.83 kg da-1 , 19.99-21.82 % DM-1 and 30.58-35.05 % DM-1 , respectively. On the other hand, CP values of interactions ranged from 18.89 to 22.54 % DM-1 . The effect of organic fertilizer applications on the yield and quality of vetch species has been limited. However, it has been determined that over 500 kg da-1 dry forage yield can be obtained from hairy vetch applied to animal manure. Conclusions: The data obtained showed that vetch species could be an important source in the supply of roughage needed in organic animal husbandry and hairy vetch has higher yields than other species. In addition, although statistically insignificant, it can be said that animal manure is more effective in vetch cultivation than zeolite and leonardite under Amik Plain conditions. Significance and Impact of the Study: There are a limited number of studies on the use of fertilizers in organic vetch cultivation. With the research carried out, the results that can help farmers who make organic vetch cultivation and future research have been obtained. In addition, it was concluded that dose determination studies should be carried out in the fertilizers used

    2,358

    full texts

    2,946

    metadata records
    Updated in last 30 days.
    Hatay Mustafa Kemal University Institutional Repository
    Access Repository Dashboard
    Do you manage Open Research Online? Become a CORE Member to access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard! 👇