28068 research outputs found
Sort by
A Kernel-Free Boundary Integral Method for Two-Dimensional Magnetostatics Analysis
No full textPerforming magnetostatic analysis accurately and efficiently is crucial for the multi-objective optimization of electromagnetic device designs. Therefore, an accurate and computationally efficient method is essential. Kernel Free Boundary Integral Method is a numerical method that can accurately and efficiently solve partial differential equations. Unlike traditional boundary integral or boundary element methods, KFBIM does not require an analytical form of Green’s function for evaluating integrals via numerical quadrature. Instead, KFBIM computes integrals by solving an equivalent interface problem on a Cartesian mesh. Compared with traditional finite difference methods for solving the governing PDEs directly, KFBIM produces a well-conditioned linear system. Therefore, the numerical solution of KFBIM is not sensitive to computer round-off errors, and the KFBIM requires only a fixed number of iterations when an iterative method (e.g., GMRES) is applied to solve the linear system.In this research, the KFBIM is introduced for solving magnetic computations in a toroidal core geometry in 2D. This study is very relevant in designing and optimizing toroidal inductors or transformers used in electrical systems, where lighter weight, higher inductance, higher efficiency, and lower leakage flux are required. The results are then compared with a commercial finite element solver (ANSYS), which shows excellent agreement. It should be noted that, compared with FEM, the KFBIM does not require a body-fitted mesh and can achieve high accuracy with a coarse mesh. In particular, the magnetic potential and tangential field intensity calculations on the boundaries are more stable and exhibit almost no oscillations.Furthermore, although KFBIM is accurate and computationally efficient, sharp corners can be a significant problem for KFBIM. Therefore, an inverse discrete Fourier transform (DFT) based geometry reconstruction is explored to overcome this challenge for smoothening sharp corners. A toroidal core with an airgap (C-core) is modeled to show the effectiveness of the proposed approach in addressing the sharp corner problem. A numerical example demonstrates that the method works for the variable coefficient PDE. In addition, magnetostatic analysis for homogeneous and nonhomogeneous material is presented for the reconstructed geometry, and results carried out from KFBIM are compared with the results of FEM analysis for the original geometry to show the differences and the potential of the proposed method
Voxel Transformer with Density-Aware Deformable Attention for 3D Object Detection
No full textThe Voxel Transformer (VoTr) is a prominent model in the field of 3D object detection, employing a transformer-based architecture to comprehend long-range voxel relationships through self-attention. However, despite its expanded receptive field, VoTr’s flexibility is constrained by its predefined receptive field. In this paper, we present a Voxel Transformer with Density-Aware Deformable Attention (VoTr-DADA), a novel approach to 3D object detection. VoTr-DADA leverages density-guided deformable attention for a more adaptable receptive field. It efficiently identifies key areas in the input using density features, combining the strengths of both VoTr and Deformable Attention. We introduce the Density-Aware Deformable Attention (DADA) module, which is specifically designed to focus on these crucial areas while adaptively extracting more informative features. Experimental results on the KITTI dataset and the Waymo Open dataset show that our proposed method outperforms the baseline VoTr model in 3D object detection while maintaining a fast inference speed
Effect of Stress Triaxiality and Lode Angle on Ductile Fracture
No full textAlthough many ductile damage accumulation studies have been done in recent years, there is still insufficient research towards the development of ductile fracture models, mainly due to the difficulty of performing experiments under different states of multiaxial stress. The goals of this Ph.D. research are to (i) produce much-needed experimental data, (ii) investigate the performance of existing models against these data, and (iii) develop a new predictive ductile fracture model validated by experiments. The new model seeks to predict the fracture strain as a function of the stress triaxiality and normalized Lode angle. One of the prominent works in this area was done by Bai and Wierzbicki in 2008 by testing 2024-T351 aluminum alloy. They proposed an asymmetric 3D empirical fracture model with six model parameters. Thus, the Bai method was investigated alongside a new model for predicting ductile fracture. For that purpose, 2139-T8 aluminum alloy was chosen for our experimental program to evaluate these models better, and the data extracted from Bai's work was also used as an additional data set. An extensive experimental program was considered to create different stress states in the material, including tensile tests (with round smooth and four round notched and plate specimens), torsion, compression (with four smooth and two notched specimens), and shear-compression experiments (two different sizes). The specimens were longitudinally machined from a block of 2139-T8 aluminum alloy. The combined effects of two variables, stress triaxiality and normalized Lode angle, define a 3D fracture envelope for fracture strain. A parallel FE simulation (fine-tuned by the experimental results) has been performed for each experiment to evaluate the evolution of stress triaxiality and Lode angle in the gauge section of the specimens with complicated geometries. Finally, these results were used in developing two predictive fracture models. The first model is based on the Bai-Wierzbicki form of fracture. The second one is a new model that has been presented in this research. This new model is a modification of the Johnson-Cook fracture model and considers the simultaneous effects of Lode angle and stress triaxiality in fracture. The original Johnson-Cook fracture model (1984) does not consider the Lode angle effect. In the end, errors in the proposed approach to modeling ductile fracture have been compared to errors from Bai's work, resulting in the conclusions and recommendations for future studies
Utilizing Image Processing in Evaluation of Fibroblast Stimulation for Collagen Remodeling
No full textThis research delves into the realm of image processing as a pivotal component in the evaluation of fibroblast stimulation for collagen remodeling. The study focuses on unraveling the intricate synergy between electrospun silk fibroin-carbon nanotube (SF-CNT) fibers and electrical stimulation, working in harmony to enhance tissue regeneration. Building upon our previous work, we successfully engineered SF-CNT fibers through the electrospinning process, yielding highly aligned structures reminiscent of natural extracellular matrix proteins. These fibers were fortified with water stability through post-treatment with ethanol vapor, while subtle additions of carbon nanotubes (CNTs) significantly improved fiber alignment, strength, and conductivity without compromising biocompatibility. This innovative platform served as a cell culture matrix for fibroblasts harvested from pelvic organ prolapse (POP) patients, facilitating electrical stimulation that triggered a substantial increase in collagen production. In this study, we harnessed the power of various image-processing software tools, including ImageJ and Python, to analyze immunostained images of fibroblasts obtained from POP patients. Under carefully tailored electrical stimulation conditions, the stimulated cells exhibited an astonishing up to 11.97-fold increase in alpha-smooth muscle actin (α-SMA) expression, unequivocally signifying the successful activation of myofibroblasts. Additionally, in an animal model employing LOX-knockout mice to mimic collagen disorders associated with POP, the application of optimized electrical stimulation conditions for patient 003 led to a remarkable surge in collagen production and structural enhancement, underlining the potential of electrical stimulation in expediting tissue remodeling. Intriguingly, fibroblasts from patient 005 and patient 006 exhibited a distinct response, shedding light on the influence of POP severity on cellular behavior. This study firmly reinforces the imperative of personalized therapeutic approaches, emphasizing the need to customize treatment strategies to align with individual patient characteristics through innovative biological image analysis techniques
Laser Powder Bed Fusion Of Cost-Effective Non-Spherical Ti-6Al-4V Powder
No full textThis comprehensive research delves into the intricate dynamics of Laser Powder Bed Fusion (L-PBF) of Ti-6Al-4V powders, emphasizing the potential of non-spherical, hydride-dehydride (HDH) powders as a cost-efficient alternative to traditional spherical powders. The study systematically explores the interplay between powder morphology, granulometry, and various post-processing treatments in shaping the resultant microstructure, porosity, and mechanical properties of L-PBF fabricated Ti-6Al-4V components.Initial investigations focused on the flowability, packing density, and resultant density of L-PBF parts using HDH powders with varying size distributions. Through meticulous optimization of laser parameters, parts with a relative density exceeding 99.5% were achieved, even at production rates 1.5–2 times higher than conventional LPBF processes. Dynamic synchrotron X-ray imaging provided insights into laser-powder interactions, revealing key mechanisms of porosity formation associated with HDH powders.
Further microstructural examinations highlighted the formation of columnar β grains with acicular α/α′ phases in the as-built condition. Mechanical tests, including fatigue assessments under fully-reversed tension-compression conditions, revealed the critical role of surface roughness in fatigue performance. Notably, mechanical grinding significantly improved fatigue strength, especially in the high cycle fatigue region, by eliminating surface micro-notches. X-ray diffraction analyses further elucidated the stress and micro-strain profiles, offering insights into the material's deformation mechanisms.
A pivotal discovery was the presence of α/α′ on prior β/β grain boundaries, challenging the prevailing notion that high cooling rates in L-PBF preclude β/β grain boundary variant selection. Electron backscatter diffraction and synchrotron X-ray imaging illuminated the role of powder characteristics in locally modulating cooling rates, leading to β/β grain boundary α′ lath growth.
Lastly, the research underscored the multifaceted interdependencies among contouring, powder granulometry, Hot Isostatic Pressing (HIP), and mechanical surface treatments. A pronounced increase in sub-surface porosities was identified when contouring was combined with fine powder granulometry. However, post-HIP treatments induced a phase transformation from martensitic α′ to a basket-weave α+β microstructure, enhancing the material's fatigue resistance to levels comparable to wrought Ti-6Al-4V.
In summation, this doctoral research offers a holistic understanding of the L-PBF process for Ti-6Al-4V, emphasizing the viability of non-spherical HDH powders and providing a roadmap for parameter optimization, defect minimization, and mechanical property enhancement in L-PBF-fabricated Ti-6Al-4V structures
Three-Dimensional Co-Culture Systems for Vascularization of Cardiac Tissue
No full textMyocardial Infarction (MI) is the partial or complete blockage of blood flow to the myocardial tissue resulting in damage and therefore loss of heart function. In the U.S. every
40 seconds, someone will suffer from MI and the only available treatment is medication to
treat the symptoms of heart function loss, but do not treat the underlying cause. Some
attempts to treat the underlying cause have arisen in the last decades including cell-based
therapies or tissue engineering therapies such as spheroid-based cardiac patches that have
shown to be promising. Improvement in the mechanical properties to create suturable
engineered tissues remain to be improved for ease of implantation purposes. Cell-laden
hydrogel scaffolds can provide improved mechanical properties compared to biomaterial
free cell-based therapies but need to allow for vascularization of the engineered tissue.
Thus, the goal of this thesis is to provide preliminary studies for the use of a cell adhesive,
proteolytically degradable PEG hydrogel scaffold that eventually would be used as an invitro model to evaluate engineered tissue vascularization for cardiac tissue engineering. To
construct this model, important cell spheroid parameters on vascular invasion in 3D culture
were investigated including the total number of cells/spheroid, the supporting cell for
endothelial cells. In order to scale-up scaffolds to size of clinically relevant dimensions, a
multilayered hydrogel construct visible light free-radical polymerization approach
encapsulating vascular spheroids in multiple layers was also investigated. Results indicate
that a total cell number of 5000 cells/spheroid aggregate were feasible due to cell sourcing.
In addition, co-cultures of endothelial and mesenchymal stem cells led to maximized
vascular invasion of the spheroids compared to fibroblast/endothelial co-culture and
endothelial monoculture of spheroids in the hydrogel. Finally, the extent of vascularization
of spheroids in each layer of the multilayered hydrogel constructs varied due to the
observed differences in mechanical properties and swelling ratio of each layer due to
incomplete polymerization of layers. This study demonstrated the importance of support
cells and hydrogel mechanical properties in promoting vascularization of spheroid which
serves as basis for building cell-laden hydrogel scaffolds for vascularization for cardiac
tissues
Effect of organic acid treatment in reducing Salmonella on six types of sprout seeds
No full textFresh sprouts present a special food safety concern as their growing conditions also favor the growth of pathogens such as Salmonella. Contamination in sprouts often originates from the seeds used for sprouting. The Produce Safety Rule requires that seeds used to grow sprouts be treated to reduce pathogens. The treatments may be applied by sprout growers or by seed suppliers. Although 20,000 ppm calcium hypochlorite is the most used seed treatment method, the high chlorine level can be hazardous to workers and the environment. Alternative seed treatment methods that are safe and environmentally friendly are needed. In addition, a post-treatment drying step is needed when seed suppliers are using chemical seed treatment methods. This study evaluated the efficacy of an organic acid solution for reducing Salmonella on six types of seeds (alfalfa, clover, radish, mung bean, onion, and broccoli). The impact of treatment on seed germination and sprout yield was also examined. Ten grams of seeds inoculated with a five-serotype cocktail of Salmonella were pre-rinsed with 40 ml of water twice and treated with 75.7 ml of the organic acid solution for 1 hour. The treated seeds were either not rinsed or rinsed with 40 ml of water twice before being dried in the biological safety cabinet for 24 hours. The Salmonella level, germination percentage, and sprout yield of seeds treated with water, seeds treated with the organic acid solution, seeds treated with organic acid, dried, and rinsed, and seeds treated with organic acids, dried, and not rinsed were compared. Salmonella reductions that could be achieved with this organic acid solution treatment were less than 0.5 log CFU/g without drying, 0.6-2.0 log CFU/g with drying and rinse, or 1.6-2.9 log CFU/g with drying and no rinse. Drying significantly enhanced the treatment efficacy (p 0.05) regardless of whether the seeds were dried or not. All treatments significantly decreased the sprout yield of clover seeds by 13% (p < 0.05 ). If seeds were not rinsed after treatment, the germination rates of clover and broccoli seeds were reduced by 7 and 9%, respectively, and the sprout yield of alfalfa seeds was reduced by 35%. Overall, the organic acid solution was ineffective when compared with 20,000 ppm calcium hypochlorite in reducing Salmonella on sprout seeds, although the drying step after treatment could improve the treatment efficacy
Laser Powder Bed Fusion Of Cost-Effective Non-Spherical Ti-6Al-4V Powder
No full textThis comprehensive research delves into the intricate dynamics of Laser Powder Bed Fusion (L-PBF) of Ti-6Al-4V powders, emphasizing the potential of non-spherical, hydride-dehydride (HDH) powders as a cost-efficient alternative to traditional spherical powders. The study systematically explores the interplay between powder morphology, granulometry, and various post-processing treatments in shaping the resultant microstructure, porosity, and mechanical properties of L-PBF fabricated Ti-6Al-4V components.Initial investigations focused on the flowability, packing density, and resultant density of L-PBF parts using HDH powders with varying size distributions. Through meticulous optimization of laser parameters, parts with a relative density exceeding 99.5% were achieved, even at production rates 1.5–2 times higher than conventional LPBF processes. Dynamic synchrotron X-ray imaging provided insights into laser-powder interactions, revealing key mechanisms of porosity formation associated with HDH powders.
Further microstructural examinations highlighted the formation of columnar β grains with acicular α/α′ phases in the as-built condition. Mechanical tests, including fatigue assessments under fully-reversed tension-compression conditions, revealed the critical role of surface roughness in fatigue performance. Notably, mechanical grinding significantly improved fatigue strength, especially in the high cycle fatigue region, by eliminating surface micro-notches. X-ray diffraction analyses further elucidated the stress and micro-strain profiles, offering insights into the material's deformation mechanisms.
A pivotal discovery was the presence of α/α′ on prior β/β grain boundaries, challenging the prevailing notion that high cooling rates in L-PBF preclude β/β grain boundary variant selection. Electron backscatter diffraction and synchrotron X-ray imaging illuminated the role of powder characteristics in locally modulating cooling rates, leading to β/β grain boundary α′ lath growth.
Lastly, the research underscored the multifaceted interdependencies among contouring, powder granulometry, Hot Isostatic Pressing (HIP), and mechanical surface treatments. A pronounced increase in sub-surface porosities was identified when contouring was combined with fine powder granulometry. However, post-HIP treatments induced a phase transformation from martensitic α′ to a basket-weave α+β microstructure, enhancing the material's fatigue resistance to levels comparable to wrought Ti-6Al-4V.
In summation, this doctoral research offers a holistic understanding of the L-PBF process for Ti-6Al-4V, emphasizing the viability of non-spherical HDH powders and providing a roadmap for parameter optimization, defect minimization, and mechanical property enhancement in L-PBF-fabricated Ti-6Al-4V structures
Adaptive Learning Approach of a Domain-Aware CNN-Based Model Observer
No full textApplication of convolutional neural networks (CNNs) for performing defect detection tasks and their use as model observers (MO) has become increasingly popular in the medical imaging field. Building upon this use of CNN MOs, we have trained the CNNs to discern between the data it was trained on, and the previously unseen images. We termed this ability domain awareness. To achieve domain awareness, we are simultaneously training a new variation of U-Net CNN to perform defect detection task, as well as to reconstruct a noisy input image. We have shown that the values of the reconstruction mean squared error can be used as a good indicator of how well the algorithm performs in the defect localization task, making a big step towards developing a domain aware CNN MO. Additionally, we have proposed an adaptive learning approach for training these algorithms, and compared them to the non-adaptive learning approach. The main results that we achieved were for the ideal observers, but we also extended these results to human observer data. We have compared different architectures of CNNs with different numbers and sizes of layers, as well as introduced data augmentation to further improve upon our results. Finally, our results show that the proposed adaptive learning approach with introduced data augmentation drastically improves upon the results of a non-adaptive approach in both human and ideal observer cases
Investigation of Electrochemical Properties and Fabrication of Lithium- and Sodium-ion Batteries
No full textSince the successful commercialization of Li-ion battery, the opportunity in creating a sustainable world with evenly-distributed energy supply and less environmental concerns has been significantly increased. This triggered tremendous efforts from both academy and industry in building better Li-ion batteries. Along the research and development over past 30 years, the performance of current Li-ion batteries has met some basic needs in our daily life, such as powering electronic devices and electric vehicles for a short time, while superior capabilities, like extended operating life, stable function under extreme circumstances, is always pursued. Under the pressure from these ever-growing demands, the corresponding Li-ion battery production is faced with a lot of new challenges. Regarding the battery production, the present Li-ion battery manufacturing heavily relies on the use of certain repo-toxic solvent, N-methyl-2-pyrrolidone (NMP), which arouses safety concerns to human health. In the pursuit of a higher energy density, silicon anode, bearing ten times the gravimetric capacity of commercially-dominating graphite anode, is intensively studied as the anode material for next-generation Li-ion batteries. However, its degradation mechanism is not completely revealed yet, which makes the methods of effective optimizations hard to be developed. In terms of the cost control, Na-ion batteries have been revisited and have received extra attention in the past decade owing to the abundance in raw materials and the high compatibility with state-of-art Li-ion industry while blank space in understanding primary electrochemical properties, such as impedance signals, has not been totally filled. This will also cause the misunderstandings in such interpretation and, thereby, postpone the pace of relevant advancement. Targeting these proposed issues, this thesis provides a series of feasible solutions via careful investigation and rational analysis with the aid of various advanced (non)electrochemical techniques, which offers a few unique perspectives in studying Li- and Na-ion batteries, and further facilitates the following research and development in the corresponding communities