Food systems (E-Journal) / Пищевые системы
Not a member yet
219 research outputs found
Sort by
СONCEPT AND CALCULATION OF THE LIMIT TRANSVERSE SIZE OF CAPILLARIES
Get PDFPorous medium are products of processing in food, agricultural, chemical and many other industries. Calculations of processes with wet porous medium are based on capillary properties of the liquid in a pore space. The capillary properties of liquids in porous media are established in pore models in the form of thin tubes of circular or slit transverse sections. The intensity of the processes occurring in it depends on the nature of the filling of the pore space with liquid. Filling with liquid and the formation of a capillary layer is possible only in small pores. However, there is no analytical justification for the transverse pore size, more than which it cannot be filled with liquid by capillary forces. With this in mind, the concept of the limiting transverse size of a capillary for a liquid under conditions of complete wetting is introduced. The limiting size calculation is based on two conditions: the shape of the axial section of the meniscus surface has the appearance of a semicircle and its extremum point is located at the level of the free surface of the fluid supplying the capillary. A capillary column cannot form in larger pores. The absence of formulas for calculating capillaries of the limiting sizes can introduce a significant error into the analytical calculation of the moisture content in the capillary layer of a liquid in porous media and moisture transfer processes. The aim of the study was to obtain formulas for calculating the limiting (largest) sizes of capillaries of a circular, flat slit section and annular transverse sections with complete wetting of their walls. For the conditions above, it was identified that the limiting distance between the walls was independent from annular capillary diameter. The formulas for the limiting transverse sizes of the flat slit and annular capillaries turned out to be the same under the assumptions above. This indicates a weak dependence of the limiting size of a slit capillary on the curvature of its transverse section. Examples of calculations of capillaries of the limiting sizes are performed.Porous medium are products of processing in food, agricultural, chemical and many other industries. Calculations of processes with wet porous medium are based on capillary properties of the liquid in a pore space. The capillary properties of liquids in porous media are established in pore models in the form of thin tubes of circular or slit transverse sections. The intensity of the processes occurring in it depends on the nature of the filling of the pore space with liquid. Filling with liquid and the formation of a capillary layer is possible only in small pores. However, there is no analytical justification for the transverse pore size, more than which it cannot be filled with liquid by capillary forces. With this in mind, the concept of the limiting transverse size of a capillary for a liquid under conditions of complete wetting is introduced. The limiting size calculation is based on two conditions: the shape of the axial section of the meniscus surface has the appearance of a semicircle and its extremum point is located at the level of the free surface of the fluid supplying the capillary. A capillary column cannot form in larger pores. The absence of formulas for calculating capillaries of the limiting sizes can introduce a significant error into the analytical calculation of the moisture content in the capillary layer of a liquid in porous media and moisture transfer processes. The aim of the study was to obtain formulas for calculating the limiting (largest) sizes of capillaries of a circular, flat slit section and annular transverse sections with complete wetting of their walls. For the conditions above, it was identified that the limiting distance between the walls was independent from annular capillary diameter. The formulas for the limiting transverse sizes of the flat slit and annular capillaries turned out to be the same under the assumptions above. This indicates a weak dependence of the limiting size of a slit capillary on the curvature of its transverse section. Examples of calculations of capillaries of the limiting sizes are performed
RETURNABLE BAKING WASTE — A NEW TYPE OF RAW MATERIALS FOR DISTILLATES PRODUCTION (PART II. STAGE OF RAW MATERIALS PREPARATION FOR DISTILLATION)
Get PDFThe processes that take place upon saccharified wort obtaining from the returnable baking waste and its fermentation was the research subject of this work. The development of operational parameters at the stage of returnable baking waste preparation for distillation, which provides a high-quality product is the purpose of the work. The samples of saccharified and fermented wort obtained from various bread and bakery products types produced by large enterprises in Moscow were the objects of the study. To characterize the composition of saccharified and fermented wort, the indicators to assess the quality of the wort from grain raw materials were used. The mass concentration of individual sugars in the wort was determined using high performance liquid chromatography on an Agilent Technologies 1200 Series device. The qualitative composition and volatile components concentration in the fermented wort was determined using gas chromatography on a Thermo Trace GC Ultra device. It was established that the percentage of solids transition to a soluble state does not depend on a returnable waste type and is in the range from 87.6% to 90.7%, and the starch transition to a soluble state, on the contrary, is determined by the processed raw materials type. It is shown that the use of rye-wheat bread after its preliminary enzymatic treatment with thinning and cytolytic drugs in a mixture with wheat bread in a ratio of 1÷1 to 1÷2 can improve the wort rheological characteristics and transfer from 98.1% to 99.3% starch of raw materials in a soluble state. It has been shown that for the efficient process of saccharified wort fermentation from returnable baking waste, the Fermiol and Turbo‑24 alcohol yeast races are most suitable, which ensure a high yield of ethanol and an optimal composition of volatile components in the fermented wort
FREE FAT IN MILK AND CHEESE PRODUCTS: INFLUENCE ON QUALITY
Get PDFThe theoretical and practical aspects of the formation of free fat in milk, cheese and cheese products with vegetable fats are considered. The amount of free fat in milk depends on the integrity of the fat globules membranes, which are affected by: ineffective emulsification of fat during the synthesis of milk in the cow’s udder (authentic fat) and physic-mechanical factors in the milk processing after milking (destabilized fat). Free fat, primarily subjected to oxidative processes and lipolysis, reduces the quality and ability to store milk. For cheese products, the presence of free fat, available for lipolysis and oxidation, is a prerequisite for obtaining high-quality products. Characteristics of the production of cheese products with vegetable fats, providing for the preliminary emulsification of vegetable fat in skim milk, contribute to the formation of denser membranes on the surface of fat globules, consisting mainly of casein micelles and whey proteins. This is the reason for the formation of a more closed structure of the fat phase with low availability of fat for enzymes and oxidizing agents. The low availability of fat in the structure of cheese products with vegetable fats is one of the factors that worsen their organoleptic characteristics. In order to increase the amount of available fat in the production of cheese products with vegetable fats, it is advisable to use additional enzyme preparations or cultures of microorganisms that activate proteolysis and lipolysis.The theoretical and practical aspects of the formation of free fat in milk, cheese and cheese products with vegetable fats are considered. The amount of free fat in milk depends on the integrity of the fat globules membranes, which are affected by: ineffective emulsification of fat during the synthesis of milk in the cow’s udder (authentic fat) and physic-mechanical factors in the milk processing after milking (destabilized fat). Free fat, primarily subjected to oxidative processes and lipolysis, reduces the quality and ability to store milk. For cheese products, the presence of free fat, available for lipolysis and oxidation, is a prerequisite for obtaining high-quality products. Characteristics of the production of cheese products with vegetable fats, providing for the preliminary emulsification of vegetable fat in skim milk, contribute to the formation of denser membranes on the surface of fat globules, consisting mainly of casein micelles and whey proteins. This is the reason for the formation of a more closed structure of the fat phase with low availability of fat for enzymes and oxidizing agents. The low availability of fat in the structure of cheese products with vegetable fats is one of the factors that worsen their organoleptic characteristics. In order to increase the amount of available fat in the production of cheese products with vegetable fats, it is advisable to use additional enzyme preparations or cultures of microorganisms that activate proteolysis and lipolysis
IMPACT OF ARTISANAL TECHNOLOGIES ON THE QUALITY INDICES OF THE COZONAC
Get PDFThe research focused on studying the impact of sourdough with spontaneous flora (SSF) (obtained also from gluten-free flour) and artizanal technologies on the quality indices of cozonac — a traditional pastry product. Physico-chemical and microbiological indices were analyzed, as well as glycemic index (GI) of cozonac samples with different fermentation agents. The experimental results showed that the GI of the cozonac samples have similar values, being between GI = 68 and GI = 71. Respectively, cozonac with SSF samples can be classified in the category of foods with moderate GI, and cozonac with commercial yeast (CY) — in the category of foods with high GI. Digestibility indices for all samples reached values between 72% and 76%. The sensory profiles of baked cozonacs were analyzed descriptively by the panel members, and the results showed that all cozonac samples were characterized by slightly acid taste, with specific and pleasant flavors.However, it seems that a long fermentation of the dough, even if CY is used as a fermenting agent, leads to the formation of quality indices of the dough and cozonac, very close to the products obtained only with SSF. The use of SSF from sorghum flour would be an alternative in the development of gluten free bakery and pastry products using artisanal technologies
RESULTS DESIGNING AND ANALYSIS WHEN INTRODUCING NEW BEVERAGE IDENTIFICATION CRITERIA
Get PDFBuilding a digital profile of food product with use of modern mathematical apparatus of basic matrices is a solution to the problem of designing innovative beverage recipes. In this regard, for the effective use of the food resource base, modeling and production of high-quality food products, there is an acute problem of developing a methodology for identifying food products using the full range of the currently available analytical base. The article discusses an algorithm for constructing a flexible experimental design for the new identification criteria development, taking into account the laboratory research peculiarities in the beverage industry. The application of software in experiment designing is considered and a practical example of integrated designing based on the construction of an identification criterion for wine materials is presented
TECHNOLOGICAL SCHEMES FOR THE PROCESSES OF PREPARATION AND MILLING BINARY GRAIN MIXTURES AND BIOCHEMICAL EVALUATION OF PRODUCED PRODUCTS
Get PDFA study of the preparation and milling of a grain mixture containing 7% of flax seeds has been carried out in order to obtain a composite wheat-flax flour, in which the entire biopotential of flax seeds was preserved. It was revealed that the preparation of the components of the grain mixture should be carried out independently, in parallel flows. During the wheat grain preparation the cold conditioning was carried out, the modes of which were the following: humidity — 15.5%, dwell time in the water — 24 hours. The optimal conditions for milling the wheat-flax mixture have been determined, which are the following: yield (%) / ash content (%) in 3 break systems (in terms of the 1st break system — grain) for the first break system — 53.5 / 1.00; for the second break system. — 22.2 / 1.11; totally for the first and the second break systems — 75.7 / 1.035; totally for the first, the second and the third break systems — 81.0 / 1.1. The technological schemes have been developed and the new varieties of wheat-flax flour with predetermined technological properties and increased nutritional value have been formed. The approximate indices of yield and quality of the new wheat-flax flour varieties are the following: Flour A — yield 45–50%, lipids 3.6–4.0%, protein 13–13.5%, ash 0.55–0.70%, whiteness — 50 conventional units; Flour B — yield 20–25%, lipids 5.5–6.0%, protein 14–14.5%, ash 0.9–1.25%, whiteness — 22 conventional units; Flour C — yield 70–75%, lipids 4.5–5.0%, protein 13.6–14.0%, ash 0.75–0.90%, whiteness — 36 conventional units. It was indicated that the total lipids content in flour from two-component mixtures increases by about 4 times, and the total protein content in the studied samples increases by 1–2%. The content of linoleic acid (ɷ‑6) in wheat-flax flour samples is 1.6…3.3 times higher than in wheat flour; the content of linolenic acid (ɷ‑3) in wheat-flax flour samples is 36.8…57.2 times higher than in wheat flour (taking into account the total lipids content in the samples). The enrichment of wheat flour due to flax seeds allows to make up the deficiency of PUFA family in the diet of a modern person and to obtain products on a grain basis of a balanced composition
METHODS OF MOLECULAR DIAGNOSTICS FOR FISH SPECIES IDENTIFICATION
Get PDFThe growth in demand for fish products as a result of globalization of trade caused a risks and threats of selling poor-quality and falsified fish products. This has become a great problem both for supervising agencies and for consumers.Many countries have regulations on food labelling and safety. For example, in the Russian Federation, Republic of Belarus and Republic of Kazakhstan has been passed the Technical Regulation of the Customs Union TR CU022/2011 “Food products in part of their labeling” that aims to prevent misinformation of consumers to ensuring realization of consumer rights to reliable information about food products, and Technical Regulation TR EAEU040/2016 “On safety of fish and fish products” requires indication of the zoological name of the species of the aquatic biological resource or the object of aquaculture.Fish species identification is traditionally carried out based on external morphological traits. However, it becomes impossible to identify species by ichthyological traits upon fish cutting, if the head and fins are removed, and the body is cut on pieces (especially, in case of fillets) and even more so upon technological processing. In this case, objective analytical methods of species identification are used, which are based on ELISA or PCR. However, DNA‑based methods have several advantages compared to ELISA methods and complement traditional morphological identification methods. This paper gives a wide overview of the most recent and used methods of fish species identification based on DNA analysis such as single-strand conformation polymorphism (SSCP) analysis, species-specific PCR, real-time PCR, polymerase chain reaction-restriction fragment length polymorphism analysis (PCR-RFLP), DNA barcoding, Sanger sequencing and next-generation sequencing (NGS)
MODERN ANALYSIS METHODS USE IN ORDER TO ESTABLISH THE GEOGRAPHIC ORIGIN OF FOOD PRODUCTS
Get PDFFood products with controlled geographical origin place are in special demand among consumers because of their specific properties, due to climatic, soil characteristics or other factors. The article provides an analysis of regulatory framework for legal goods protection with an indication of their origin place on the territory of the Russian Federation and in other countries. Existing authentication methods for this type of product are reviewed. Based on the analysis of scientific literature, the authors noted the most significant works aimed at confirming the authenticity of food products’ origin place on the example of honey and meat products, which were carried out in the countries of the European Union, Australia, China, Brazil, South Africa, the USA and other countries. It is shown that the most widespread researches aimed at studying values of isotopic ratios of hydrogen (2H/1H), carbon (13C/12C), oxygen (18O/16O), nitrogen (15N/14N) and sulfur (34S/32S) in compounds contained in products that reflect the distribution of «light» and «heavy» isotopes during biological and geochemical processes within a single region. The analysis of the works aimed at studying the qualitative and quantitative composition of trace elements and rare earth metals (As, B, Ba, Cd, Li, Mn, Pd, Rb, Se, Te, Tl, Dy, U, etc.), as well as research of isotopic relations values of some elements (87Sr/86Sr, 207Pb/206Pb, etc.) in product samples and soils of studied region. The advantages of an integrated research approach, which includes the creation of data array of various indicators values and its in-depth analysis using chemometric algorithms and mathematical modeling methods, are shown.Food products with controlled geographical origin place are in special demand among consumers because of their specific properties, due to climatic, soil characteristics or other factors. The article provides an analysis of regulatory framework for legal goods protection with an indication of their origin place on the territory of the Russian Federation and in other countries. Existing authentication methods for this type of product are reviewed. Based on the analysis of scientific literature, the authors noted the most significant works aimed at confirming the authenticity of food products’ origin place on the example of honey and meat products, which were carried out in the countries of the European Union, Australia, China, Brazil, South Africa, the USA and other countries. It is shown that the most widespread researches aimed at studying values of isotopic ratios of hydrogen (2H/1H), carbon (13C/12C), oxygen (18O/16O), nitrogen (15N/14N) and sulfur (34S/32S) in compounds contained in products that reflect the distribution of «light» and «heavy» isotopes during biological and geochemical processes within a single region. The analysis of the works aimed at studying the qualitative and quantitative composition of trace elements and rare earth metals (As, B, Ba, Cd, Li, Mn, Pd, Rb, Se, Te, Tl, Dy, U, etc.), as well as research of isotopic relations values of some elements (87Sr/86Sr, 207Pb/206Pb, etc.) in product samples and soils of studied region. The advantages of an integrated research approach, which includes the creation of data array of various indicators values and its in-depth analysis using chemometric algorithms and mathematical modeling methods, are shown
RESEARCH OF THE EFFECT OF AGING PROCESS ON DISPERSION OF AIR PHASE AND ICE CRYSTALS IN MILK ICE CREAM
Get PDFIn this research the results of analytical studies are presented, which prove the lack of data on influence of aging process on dispersion of structural elements in ice cream with fat mass fraction of 6% or less, and experimental studies on definition of dispersion of air phase and ice crystals in milk ice cream. It was found that the process of the mix aging doesn’t significantly affect the dispersion of air phase and ice crystals in ice cream with fat mass fraction of 3%. In ice cream with fat mass fraction of 6%, made from a mix, the dispersion of the air phase increased along with the aging process, and the size of almost all air bubbles were less than 50 microns. At the same time the dispersion of ice crystals increased by no more than 10%. The decrease in dispersion of the air phase during the storage period was observed, mostly in ice cream with a fat mass fraction of 6% produced of the cured mix. The research results have the practical importance as they justify the need for the aging process in the production of ice cream with a low mass fraction of fat and determine the necessity of further research in this area.In this research the results of analytical studies are presented, which prove the lack of data on influence of aging process on dispersion of structural elements in ice cream with fat mass fraction of 6% or less, and experimental studies on definition of dispersion of air phase and ice crystals in milk ice cream. It was found that the process of the mix aging doesn’t significantly affect the dispersion of air phase and ice crystals in ice cream with fat mass fraction of 3%. In ice cream with fat mass fraction of 6%, made from a mix, the dispersion of the air phase increased along with the aging process, and the size of almost all air bubbles were less than 50 microns. At the same time the dispersion of ice crystals increased by no more than 10%. The decrease in dispersion of the air phase during the storage period was observed, mostly in ice cream with a fat mass fraction of 6% produced of the cured mix. The research results have the practical importance as they justify the need for the aging process in the production of ice cream with a low mass fraction of fat and determine the necessity of further research in this area
Beta-glucans from biomass of plant and microbial origin
Get PDFThe aim of the present study is to explore the transformation of (1→3)(1→4)-β-D-glucans of rye biomass by Aspergills niger and accumulation of (1→3)(1→6)-β-D-glucans in the microbial cell wall.Biomass from rye grain was obtained as a result of enzymatic hydrolysis of grain grinding of Omsk region of non-standard quality with grain impurity content of 45 ± 2 % by preparations (1→4)-β-glucanolytic, (1→3)-β-glucanolytic, (1→4)-xylanolytic and (1→4)-amylolytic action. Fermentation of hydrolysates, sucrosemineral and molasses medium by A. niger was carried out by a batch process under aerobic conditions. Determined the content of β-glucans, amino-nitrogen, glucose, disaccharides in grinding grain rye, rye biomass, the biomass of A. niger, the supernatants by colorimetric methods. Determination of chitin in biomass and qualitative determination of chitosan in supernatants of hydrolysates was carried out using chitosan sulfate sample and subsequent microscopy.The results of the research showed that (1→3)(1→4)-β-D-glucans in grain grinding are 10.2 ± 0.2 % in terms of dry matter, which exceeds the content of polysaccharide in the grain of standard quality by 1.5 – 3 times. In rye biomass revealed their smaller amount, 6.4 ± 0.5 %, apparently, due to the action of (1→4)and (1→3)-β-glucanase, (1→4)-xylanase and (1→4)-amylase. In microbial mass A. niger content of (1→3)(1→6)-β-Dglucans were at the level of 21.7 ± 0.7 %.On the basis of the obtained results, it was concluded that it is possible to use rye grain of non-standard quality, with a high content of grain impurities and a low proportion of starch polysaccharides, as a source of β-glucancontaining substrate for biosynthesis (1→3)(1→6)-β-D-glucans by A. niger having advantages over (1→3) (1→4)-β-D-glucans of plant origin. They are functionally more active and have a wide range of applications, namely as food additives in the manufacture of a wide range of products: for the enrichment of fibers, increasing the shelf life of products due to its water-binding properties, as thickeners, emulsifying and fat-reducing microingredients, stabilizers of creamy emulsions, textureformers, flavor enhancers.The aim of the present study is to explore the transformation of (1→3)(1→4)-β-D-glucans of rye biomass by Aspergills niger and accumulation of (1→3)(1→6)-β-D-glucans in the microbial cell wall.Biomass from rye grain was obtained as a result of enzymatic hydrolysis of grain grinding of Omsk region of non-standard quality with grain impurity content of 45 ± 2 % by preparations (1→4)-β-glucanolytic, (1→3)-β-glucanolytic, (1→4)-xylanolytic and (1→4)-amylolytic action. Fermentation of hydrolysates, sucrosemineral and molasses medium by A. niger was carried out by a batch process under aerobic conditions. Determined the content of β-glucans, amino-nitrogen, glucose, disaccharides in grinding grain rye, rye biomass, the biomass of A. niger, the supernatants by colorimetric methods. Determination of chitin in biomass and qualitative determination of chitosan in supernatants of hydrolysates was carried out using chitosan sulfate sample and subsequent microscopy.The results of the research showed that (1→3)(1→4)-β-D-glucans in grain grinding are 10.2 ± 0.2 % in terms of dry matter, which exceeds the content of polysaccharide in the grain of standard quality by 1.5 – 3 times. In rye biomass revealed their smaller amount, 6.4 ± 0.5 %, apparently, due to the action of (1→4)and (1→3)-β-glucanase, (1→4)-xylanase and (1→4)-amylase. In microbial mass A. niger content of (1→3)(1→6)-β-Dglucans were at the level of 21.7 ± 0.7 %.On the basis of the obtained results, it was concluded that it is possible to use rye grain of non-standard quality, with a high content of grain impurities and a low proportion of starch polysaccharides, as a source of β-glucancontaining substrate for biosynthesis (1→3)(1→6)-β-D-glucans by A. niger having advantages over (1→3) (1→4)-β-D-glucans of plant origin. They are functionally more active and have a wide range of applications, namely as food additives in the manufacture of a wide range of products: for the enrichment of fibers, increasing the shelf life of products due to its water-binding properties, as thickeners, emulsifying and fat-reducing microingredients, stabilizers of creamy emulsions, textureformers, flavor enhancers